P2041NXN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC | NXP
MPN: P2041NXN7MMC ⚠ Huling PagbiliP2041NXN7MMC Ulas
A QorIQ communications processor is a multi-core Power Architecture SoC that integrates CPU cores, memory controllers, high-speed serial interfaces, packet-processing acceleration, and security engines into a single device. Within the broader taxonomy, QorIQ belongs to communications processors -> microprocessors -> integrated circuits -> semiconductors. The P2041 brings high-end features pioneered in NXP's P4 platform into the mid-range quad-core segment while remaining software-compatible with P1, P3, P4, and P5 families, enabling scalable software reuse across NXP's networking portfolio.
Key features include four 32-bit PowerPC e500mc cores with hardware hypervisor and virtualization support, a high-bandwidth DDR3/DDR3L memory controller with ECC, integrated 10 Gigabit Ethernet MACs, multiple 1 Gigabit Ethernet interfaces, hardware acceleration for packet classification and encryption, and robust thermal management for fanless operation. Compared to the pin-compatible P2040, the P2041 adds additional cryptographic acceleration engines and higher core frequency options.
The architecture combines four out-of-order e500mc cores with NXP's CoreNet coherency fabric, delivering deterministic performance for control-plane and data-plane workloads. The 45nm process balances performance-per-watt, allowing fanless deployment in thermally constrained networking and industrial chassis where the 780-FCPBGA package manages thermal dissipation via a heat spreader.
Typical applications include industrial Ethernet switches, network routers and gateways, multi-service access platforms, LTE base station controllers, factory automation controllers, and defense/aerospace secure networking. The P2041NXN7MMC is suited wherever multiple secure packet-processing threads must run in parallel without sacrificing deterministic latency.
When designing with this device, allocate the largest copper area possible for the FCPBGA heat spreader to keep junction temperature within the -40C to +105C range at full load. Use NXP's CodeWarrior or Linux SDK toolchains and validate signal-integrity on 10GbE SerDes traces with the device's reference design guidelines.
This page synthesizes distributor pricing, same-family NXP drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, including lifecycle context relevant for long-term industrial deployments.
Mga alternatibo na pwedeng ilagay na P2041NXN7MMC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok P2041NXN7MMC (parehas na form factor at footprint) — pagkakaiba sa Ethernet, Mounting Type, Operating Temperature, Package, Process Technology.
P2040NXN7MMC
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
P2041NSE7MMC
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
P2020NXE7MMC
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
P2041NXE7MMC
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →P2041NXN7MMC-557
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
P2041NXN7MMC Mga Pinakamataas na Rating at Electrical Characteristics
| Series | QorIQ P2 |
| Core Processor | PowerPC e500mc |
| Number of Cores | 4 |
| Core Width | 32-Bit |
| Core Speed | 1.2 GHz |
| Process Technology | 45 nm |
| RAM Controllers | DDR3, DDR3L |
| Graphics Acceleration | No |
| Ethernet | 10/100/1000 Mbps (5 interfaces) |
| 10GbE Support | Yes (via XAUI/KR SerDes) |
| PCIe | Yes (PCI Express) |
| SATA | Yes |
| Serial RapidIO (SRIO) | Yes |
| Temperature na Operasyon | -40C to +105C |
| Packhaging | 780-FCPBGA (23x23 mm) |
| Uri ng Pagpapasok | Surface Mount (BGA) |
| Tindminan RoHS | Compliant (per distributor listings) |
Gabay sa Pin Configuration ng P2041NXN7MMC 780-fcpbga (23x23 mm)
Pin configuration para sa P2041NXN7MMC (780-fcpbga (23x23 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa P2041NXN7MMC.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
P2041NXN7MMC ay nararapat para sa 6 aplikasyons: Industrial Ethernet Switches, Multi-Service Access Routers, LTE Small Cell Base Station Controllers, Defense and Secure Networking Platforms, Factory Automation Controllers, Network-Attached Storage Controllers.
Industrial Ethernet Switches
The P2041NXN7MMC is well-matched to managed industrial Ethernet switches thanks to its five integrated 1GbE MACs and hardware-accelerated packet classification. With four 1.2GHz e500mc cores running NXP's SDK or a Yocto-based Linux, the device can drive wire-speed Layer 2/3 forwarding across multiple ports while leaving headroom for routing protocols, ACLs, and management-plane services. The -40C to +105C operating range allows deployment in factory cabinets and outdoor enclosures without active cooling, and the 780-FCPBGA package provides sufficient thermal mass for fanless designs when paired with a chassis-mounted heat spreader. Compared with discrete CPU-plus-switch-ASIC designs, the integrated SoC simplifies BOM and reduces PCB layer count by 2-4 layers.
Inirekomenda
Multi-Service Access Routers
Multi-service access routers combine WAN aggregation, VPN termination, and subscriber management on a single platform, and the P2041NXN7MMC's hardware cryptographic acceleration makes it a strong fit. Each e500mc core can be dedicated to a specific data-plane or control-plane workload, while SEC engines offload IPsec, SSL/TLS, and SRTP without consuming core cycles. The integrated DDR3/DDR3L controller with ECC supports the high-memory-bandwidth demands of bulk crypto and routing-table lookups, and PCIe/SRIO links connect to DSP or FPGA co-processors for additional WAN media support. Versus a generic x86-based router, the P2041NXN7MMC delivers deterministic latency and lower power, often under 20W at full quad-core load.
Inirekomenda
LTE Small Cell Base Station Controllers
For LTE small cell base station controllers, the P2041NXN7MMC combines enough CPU performance to run real-time baseband scheduling with deterministic Linux task scheduling across four cores. NXP's QorIQ SDK includes LTE Layer 1 reference integration paths, and the device's hardware virtualization allows guest OS environments for security-sensitive workloads. The integrated 10GbE SerDes provides a clean backhaul connection to the core network without an external PHY, while PCIe connects to RF front-end cards. The extended -40C to +105C temperature range supports outdoor small-cell deployments and thermally constrained tower-top cabinets.
Inirekomenda
Defense and Secure Networking Platforms
Defense and secure networking platforms require hardware-rooted crypto, secure boot, and tamper-resistance, all features supported by the P2041NXN7MMC's SEC engine and NXP's Trust Architecture. The four e500mc cores run isolated VMs for red/black separation between classified and unclassified traffic, while SRIO links enable low-latency interconnect with FPGA-based packet processors. Operating across -40C to +105C, the device meets MIL-STD-810 environmental requirements when paired with conformal coating and ruggedized chassis. NXP's long-term support commitment for defense programs makes the P2041 family a known-good choice for long-lifecycle military programs.
Inirekomenda
Factory Automation Controllers
Factory automation controllers benefit from the P2041NXN7MMC's deterministic multi-core processing, enabling simultaneous motion control loops, vision processing hand-off, and EtherCAT/MQTT protocol handling. The PCIe interface connects to industrial I/O cards and fieldbus gateways, while SATA supports local data logging on ruggedized SSDs. With -40C to +105C operation, the device survives near motors, drives, and other heat-generating equipment without active cooling. NXP's Linux SDK with PREEMPT_RT kernel patches supports the hard real-time requirements typical of motion control, while the hardware crypto engine secures machine-to-machine communication.
Inirekomenda
Network-Attached Storage Controllers
The P2041NXN7MMC's PCIe, SATA, and 1G/10GbE interfaces make it a natural fit for mid-range network-attached storage (NAS) and unified storage controllers in the 100-500TB capacity range. Four e500mc cores deliver sufficient throughput for SMB/NFS protocol processing and software RAID-6 reconstruction, while hardware crypto accelerates encrypted volumes and SMB3 signing. DDR3L with ECC supports write-back caches up to 8GB, and SRIO/PCIe can connect to external SAS expanders or NVMe adapters. The SoC integration reduces BOM cost versus discrete CPU-plus-storage-processor designs, especially valuable in small-form-factor rackmount appliances.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for P2041NXN7MMC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | P2040NXN7MMC | P2041NSE7MMC | P2020NXE7MMC | P2041NXE7MMC | P2041NXN7MMC-557 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23 mm) | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same |
| Core Count | 4 x PowerPC e500mc | 4 x PowerPC e500mc | 4 x PowerPC e500mc | 2 x PowerPC e500mc (-50%) | 4 x PowerPC e500mc | 4 x PowerPC e500mc |
| Core Speed | 1.2 GHz | 1.0-1.2 GHz (variant dependent) | 1.2 GHz | 1.0-1.2 GHz | 1.2 GHz | 1.2 GHz |
| Operating Temperature | -40C to +105C | -40C to +105C | 0C to +105C (standard) | -40C to +105C | -40C to +105C | -40C to +105C |
| Memory Controller | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC |
| Crypto Acceleration | Full SEC engine set | Reduced SEC engine set | Full SEC engine set | Reduced SEC engine set | Full SEC engine set | Full SEC engine set |
| Lifecycle Status | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy |
Pangunahing mga Pagkakaiba
- Quad-core 1.2GHz with hardware virtualization per core (kumpara saP2020NXE7MMC)
- Full SEC cryptographic acceleration engines (kumpara saP2040NXN7MMC)
- Pin-compatible with P2 family for software scalability (kumpara saT2081NXE8MMC (8-core))
Talaan ng Disenyo
Estimated: At 1.2GHz quad-core with all cores active, the P2041NXN7MMC typical power dissipation is approximately 8-12W. With the 780-FCPBGA package, thermal resistance from junction to case (theta_JC) is typically around 0.5 C/W for FCPBGA with integrated heat spreader. A chassis-mounted heat spreader or forced airflow is required to maintain junction temperature below 105C, especially in sealed enclosures.
The 780-FCPBGA package requires a high-layer-count PCB (typically 10+ layers) with microvia-in-pad or HDI construction for the BGA breakout. Per NXP's QorIQ P2 design guide, route 10GbE and PCIe SerDes as 85-100 ohm differential pairs with intra-pair skew under 1ps. Reference plane stitching vias every 200 mil near SerDes lanes, and keep AC-to-SW capacitor placement within 100 mil of BGA power balls.
Do not confuse the P2041NXN7MMC with the BSC9132 series - the BSC9132NXE7MNMB shares the QorIQ naming convention but uses a different package and is not pin-compatible. When migrating designs, verify against NXP's product change notices (PCN) and errata documents - the R2 silicon revision includes important errata fixes compared to earlier revisions, so substituting an R1 part into an R2 design may reintroduce known issues.
The P2041NXN7MMC is in the last-time-buy phase per NXP's product page. Place final orders promptly if you have a qualification program in flight, and qualify a successor family (LS1046A recommended) for new designs. Note that the P2041NXN7MMC-557 variant may have different last-order dates per the -557 process control suffix.
Impormasyon ng Pagsunod sa Kautusan
RoHS and REACH compliance per distributor listings (DigiKey, Mouser). AEC-Q100 not applicable (industrial/extended-temperature networking SoC, not automotive grade). Halogen-free status not explicitly confirmed in provided data.