PEX8648-BB50RBIG - 48-Lane PCIe Gen2 Switch | Broadcom
MPN: PEX8648-BB50RBIG ✓ NakahandaPEX8648-BB50RBIG Ulas
A PCI Express switch is a semiconductor device that creates multiple PCIe links from an upstream host connection. It belongs to the PCI Express interface-controller family, alongside host bridges, endpoint controllers and fabric switches. By placing a switch between a root complex and downstream devices, a system can support concurrent expansion traffic, peer-to-peer routing and more complex PCI Express topologies than a direct point-to-point connection permits.
The confirmed PEX8648 family characteristics include support for 48 lanes across 12 ports, PCIe Gen2 operation at 5.0 GT/s, and the 676-FCBGA package identified for the BB50 variants. These specifications make the device suitable for high-bandwidth platform designs requiring numerous downstream links. Its scale is particularly relevant to storage systems, advanced networking appliances, embedded computing platforms and test systems that must aggregate several PCIe devices.
The PEX8648 data book describes the BB silicon revision and its detailed technical specifications. A 27 x 27 mm FCBGA package provides a dense mounting solution for multilayer boards, but it also requires careful escape routing, plane management, power delivery and thermal design. Because the package contains 676 balls, board designers should preserve the manufacturer's land pattern, ball assignment and reference design rather than treating the package as a generic square BGA.
Typical deployments place one or more PCIe switches behind a host controller or another fabric switch. In a server or storage controller, the switch can connect NVMe-capable devices, host buses and management interfaces. In an industrial or networking appliance, it can organize multiple endpoint controllers behind a shared upstream link. The primary engineering trade-off is that PCIe switching adds board area, power, configuration requirements and signal-integrity complexity in exchange for topology flexibility and aggregate throughput.
Power delivery must account for both the main supply rails and the auxiliary rails used by the reference architecture. Layer-stackup selection, connector and retimer placement, and the separation of high-speed and power paths should follow the Broadcom reference material. For a 27 x 27 mm BGA, inspection and assembly processes should also be coordinated with the board fabricator because fine-pitch ball alignment can materially affect yield.
This page combines the verified 48-lane, 12-port, 5.0 GT/s and FCBGA-676 characteristics with practical routing, power, thermal and replacement guidance. The alternatives table focuses on same-package PEX8648 orderable variants, while the application sections explain how the switch architecture changes board-level design decisions.
Mga alternatibo na pwedeng ilagay na PEX8648-BB50RBIG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
PEX8648-BB50RBI G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8648-BB50RBC G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8648-BB50RBI F
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8648-BB50RBC F
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8648-BB50BI F
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8648-BB50RBIG Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | PCI Express Gen2 switch IC |
| PCI Express Generation | Gen2 |
| Maximum Data Rate | 5.0 GT/s |
| Lane Configuration | 48 lanes |
| Port Configuration | 12 ports |
| Packhaging | 676-FCBGA (27 x 27 mm) |
| Terminal Count | 676 balls |
| Uri ng Pagpapasok | Surface mount |
| Package Shape | Square |
| Silicon Revision | BB |
| Industrial Temperature Support | Supported by the PEX8648 BB family |
| Tindminan RoHS | Compliant for the identified PEX8648-BB50RBC listing |
Gabay sa Pin Configuration ng PEX8648-BB50RBIG square
Pin configuration para sa PEX8648-BB50RBIG (square package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa PEX8648-BB50RBIG.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PEX8648-BB50RBIG ay nararapat para sa 6 aplikasyons: NVMe Storage Platform, Enterprise Network Appliance, Industrial Embedded Controller, PCIe Test and Measurement, High-Performance Computing Platform, Data Acquisition System.
NVMe Storage Platform
The PEX8648-BB50RBIG fits NVMe storage platforms that need numerous PCIe links behind a common fabric. Its 48-lane, 12-port Gen2 organization can support multiple controller-to-device paths while providing a more flexible topology than direct host connections. Board designers should assign lane widths according to the required workload mix and use the manufacturer configuration guidance to balance traffic across ports. The 676-FCBGA also demands multilayer escape routing, continuous return-path planning and a power grid capable of supporting simultaneous switching activity. PCIe reference-clock and transmitter-equivalent settings should be validated with the selected storage controller, particularly when several high-bandwidth devices transmit concurrently.
Inirekomenda
Enterprise Network Appliance
The PEX8648-BB50RBIG is suitable for enterprise network appliances that must consolidate several PCI Express endpoint functions behind a host or fabric switch. The 48-lane capacity and 12-port configuration provide a practical base for packet-processing engines, security controllers, storage interfaces and management controllers. Because the device uses a 27 x 27 mm, 676-ball FCBGA, signal integrity becomes a primary design constraint: high-speed routes need a suitable layer stackup, adjacent aggressor mitigation and uninterrupted reference planes. Power delivery should be divided into appropriately decoupled rails, while thermal analysis must include local hot spots beneath the BGA. Final lane assignment and operating limits should follow the Broadcom data book and the endpoint timing requirements.
Inirekomenda
Industrial Embedded Controller
The PEX8648-BB50RBIG can support industrial embedded systems that combine several PCIe peripherals, such as acquisition controllers, motion interfaces and high-speed storage adapters. The 48-lane, 12-port arrangement permits a structured fabric instead of limiting the design to a small number of direct links. Industrial implementations should align the selected suffix with the required temperature grade and production qualification. Layout work should prioritize deterministic escape routing from the FCBGA, separation of clock-sensitive and high-speed data paths, and copper areas capable of carrying both transient and sustained current. The design should also include fault monitoring and recovery behavior suitable for the enclosure temperature, power quality and service expectations of industrial equipment.
Inirekomenda
PCIe Test and Measurement
The PEX8648-BB50RBIG fits modular test and measurement systems that need to connect several instrument, pattern-generator or acquisition endpoints to a host. The large switch configuration gives designers room to construct configurable test topologies rather than limiting each instrument to a direct root-port relationship. For accurate high-speed operation, the board should use controlled-length routing, carefully placed test points and a stackup selected for the intended 5.0 GT/s signaling environment. Synchronization and reference-clock distribution require particular attention when instruments exchange phase-sensitive data. Power sequencing, reset control and thermal monitoring should be designed as part of the switch subsystem so that fault conditions can be isolated without destabilizing unrelated downstream devices.
Inirekomenda
High-Performance Computing Platform
The PEX8648-BB50RBIG can act as the central PCI Express switching element in a high-performance computing platform that connects accelerators, storage and I/O controllers. Its 48-lane Gen2 fabric provides a broad routing base while maintaining a 5.0 GT/s per-lane signaling rate. Effective deployment depends on workload-aware port allocation, consistent reference-clock behavior and sufficient board-level power delivery for concurrent traffic. A 676-ball FCBGA also increases escape-routing density, so layer transitions, via symmetry and return-path continuity should be reviewed during schematic sign-off. Thermal design should examine the package under maximum lane utilization rather than average traffic, because burst-oriented accelerator workloads can produce localized heating around the switch and its power-distribution network.
Inirekomenda
Data Acquisition System
The PEX8648-BB50RBIG is appropriate for data-acquisition systems that combine multiple fast PCIe endpoints with a host processor. Its 12-port Gen2 fabric can support a structured arrangement of converter, digitizer and processing nodes, while the 48-lane total provides room to configure paths according to required bandwidth. Signal-integrity planning should begin with the supported link rate of 5.0 GT/s and include insertion loss, crosstalk, reference-plane continuity and connector or package-transition effects. Because the FCBGA requires dense escape routing, the component placement and layer assignment should minimize high-speed lane breaks and unnecessary stubs. Power and thermal verification should include worst-case simultaneous acquisition rates, and the final configuration should be validated against each endpoint's lane-width and clocking requirements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PEX8648-BB50RBIG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PEX8648-BB50RBI G | PEX8648-BB50RBC G | PEX8648-BB50RBI F | PEX8648-BB50RBC F | PEX8648-BB50BI F |
|---|---|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) |
| PCI Express Generation | Gen2 | Gen2 | Gen2 | Gen2 | Gen2 | Gen2 |
| Maximum Data Rate | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s |
| Lane Configuration | 48 lanes | 48 lanes | 48 lanes | 48 lanes | 48 lanes | 48 lanes |
| Port Configuration | 12 ports | 12 ports | 12 ports | 12 ports | 12 ports | 12 ports |
| Silicon Revision | BB | BB | BB | BB | BB | BB |
| Orderable Suffix | RBIG | RBI G | RBC G | RBI F | RBC F | BB50BI F |
Pangunahing mga Pagkakaiba
- Large integrated PCI Express fabric (kumpara saPEX8648-BB50BI F)
- Consistent Gen2 switch performance across suffix options (kumpara saPEX8648-BB50RBCG)
- Same-package simplification for platform reuse (kumpara saPEX8648-BB50RBIF)
- Broad same-family sourcing options (kumpara saPEX8648-BB50RBCF)
Talaan ng Disenyo
Use the Broadcom land pattern and ball map without changing pad sizes, solder-mask definitions or paste apertures. The 27 x 27 mm, 676-ball FCBGA requires dense escape routing, so the layer stackup should provide enough adjacent signal and return-path layers for all enabled lanes. Review via transitions, reference-plane continuity and connector or package exits as one complete signal path. A completed design should be checked with the fabricator's assembly process because BGA alignment, inspection and stencil coverage directly affect production yield.
Partition the PEX8648 supply network into the rails specified by the manufacturer data book and place decoupling capacitance close to the associated BGA power balls. Maintain low-impedance planes from the regulator to the package, and avoid sharing narrow necks between high-demand areas. Current and transient requirements should be evaluated for the configured lane count because the 48-lane fabric can create substantially more simultaneous switching activity than a lightly loaded reference design.
Perform thermal analysis at the package, power-delivery network and adjacent components rather than relying only on the ambient enclosure temperature. The 676-ball FCBGA concentrates heat around its underside, and activity-dependent lane loading can change the dissipated power. Provide copper spreading paths where the mechanical and assembly design permits, account for the board stackup and enclosure airflow, and verify the hottest locations against the operating-temperature requirement under sustained maximum traffic.
Keep the 5.0 GT/s PCIe routes short through package and connector transitions, maintain continuous reference planes and avoid stubs on clock or data nets. Review lane-to-lane crosstalk, insertion loss and via impedance with the actual PCB stackup. Configuration of equalization, reference clocks and transmitter settings must follow the Broadcom data book and the endpoint-device requirements; a common switch footprint does not make incompatible endpoint configurations interchangeable.
Do not substitute a PEX8648 suffix solely because the lane count, port count and package name match. Confirm the complete ordering code, silicon revision, temperature grade, qualification status, configuration method and lifecycle requirements before releasing a substitution. The G and F suffix differences are not quantified by the published listing summaries, so procurement and engineering approval should both be based on the manufacturer ordering information for the exact device.
Impormasyon ng Pagsunod sa Kautusan
A RoHS-compliant status is identified for the closely related PEX8648-BB50RBC-G listing, but it is not transferred to the exact target or other suffix variants. The PEX8648 BB documentation notes industrial-temperature support; exact suffix qualification remains unspecified.