PEX8696-AA50RBCF - 96-Lane PCIe 2.0 Switch | Broadcom
MPN: PEX8696-AA50RBCF ✓ NakahandaPEX8696-AA50RBCF Ulas
A PCI Express switch is a semiconductor device that expands one upstream PCI Express interface into multiple downstream ports. It belongs to the PCI Express interface IC hierarchy, where system I/O connectivity, protocol translation, lane routing, and downstream-device arbitration are handled by dedicated switching silicon. Such devices reduce the number of host-controller connections required in multi-lane systems.
The PEX8696 provides 96 aggregate PCI Express lanes across 24 ports and supports PCI Express Gen 2 operation at 5.0 GT/s per lane. Its large 1156-FCBGA package provides the interconnect density required for a switch of this scale. The device is identified as a commercial-temperature, square, ball-grid-array PCI bus controller.
Broadcom's reliability documentation associates the PEX8696-AA50RBC family with TSMC's 90 nm Low-K process technology and a 35 x 35 mm lead-free solder-bump HFC-BGA package. These package and process details are important for high-speed systems because controlled escape routing, low inductance, manufacturing compatibility, and board-level signal integrity determine whether the theoretical PCIe link rate can be sustained in practice.
Typical applications include server storage fabrics, PCI Express expansion systems, host-to-card switching, embedded computing platforms, and industrial data-acquisition systems. A 24-port switch is especially useful where many peripherals must share a limited set of host interfaces without introducing a separate root complex for every endpoint.
Board implementation requires careful attention to controlled-impedance routing, lossless or lightly lossy PCB materials, power delivery, and connector and via placement. Keep high-speed differential routes short and avoid unnecessary stubs. Refer to the Broadcom reference design and pin-description material for the exact ball assignments, reference clock connections, supply rails, and configuration requirements before fabrication.
This page combines Broadcom device specifications, package characteristics, lifecycle considerations, and same-footprint replacement guidance with practical PCB and signal-integrity notes. It is intended to help system architects and hardware engineers determine whether the 96-lane, 24-port PCIe Gen 2 switch matches their expansion, routing, and manufacturability requirements.
Mga alternatibo na pwedeng ilagay na PEX8696-AA50RBCF — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
PEX8696-AA50RBCG
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8696-AA50BCG
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8696-AA50BCF
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PEX8696-AA50RBCF Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | PCI Express Gen 2 switch IC |
| PCI Express Generation | Gen 2 |
| Maximum Data Rate | 5.0 GT/s per lane |
| Lane Count | 96 lanes |
| Port Count | 24 ports |
| Upstream Interface | PCI Express |
| Downstream Interfaces | 24 PCI Express ports |
| Package Type | 1156-ball FCBGA |
| Package Code | HBGA |
| Package Shape | Square |
| Terminal Form | Ball |
| Package Dimensions | 35 x 35 mm |
| Terminal Count | 1156 balls |
| Temperature Grade | Commercial |
| Manufacturing Technology | 90 nm Low-K process |
| Solder Bump Package | Lead-free HFC-BGA |
| Assembly Site | ASE Kaohsiung, Taiwan |
| Primary Bus | PCI Express |
| Address Bus Width | 0 bit |
Gabay sa Pin Configuration ng PEX8696-AA50RBCF lead-free hfc-bga
Pin configuration para sa PEX8696-AA50RBCF (lead-free hfc-bga package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa PEX8696-AA50RBCF.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PEX8696-AA50RBCF ay nararapat para sa 6 aplikasyons: PCIe Server Expansion, Storage Fabric Expansion, Embedded Computing Platform, Data-Acquisition System, PCIe Network Adapter, Industrial Test and Measurement.
PCIe Server Expansion
The PEX8696-AA50RBCF fits high-density server expansion because its 96 lanes and 24 ports allow one upstream connection to feed numerous downstream PCI Express devices. At 5.0 GT/s per lane, it can support Gen 2 endpoint links without requiring a separate host controller for every peripheral. The 1156-ball FCBGA provides the power, ground, and signal contacts needed by a switch of this scale. Implementation requires a multilayer PCB with controlled-impedance routing, careful return-path continuity, and an architecture that can tolerate the latency and arbitration behavior of a multiport switching fabric.
Storage Fabric Expansion
The PEX8696-AA50RBCF is suitable for storage systems that need to consolidate multiple PCI Express endpoints behind a shared switch. Its 24 ports can organize controllers, expanders, or other storage-facing devices into a managed fabric, while 96 total lanes provide broad aggregate connectivity. Operation at 5.0 GT/s per lane aligns with Gen 2 storage links. System planners should budget for switch latency, power-delivery capacity, thermal management, and lossless-routing constraints, and should use the manufacturer reference design when defining the board stackup and ball-escape pattern.
Embedded Computing Platform
The PEX8696-AA50RBCF can serve as a central PCI Express fabric in an embedded computing platform that needs numerous accelerator, acquisition, or communication endpoints. Twenty-four downstream ports reduce the number of direct host connections, while the 96-lane architecture provides ample channel density for high-throughput modules. The commercial temperature grade is appropriate for controlled industrial enclosures. The 35 x 35 mm 1156-FCBGA demands fine-pitch assembly capability, robust power delivery, and signal-integrity analysis across every enabled lane before high-volume production.
Data-Acquisition System
The PEX8696-AA50RBCF is applicable to modular data-acquisition systems in which several PCI Express digitizers, converters, or signal-processing cards must communicate with one host fabric. Its 24-port configuration simplifies topology construction and its 96 lanes support concurrent device paths. Because each enabled differential link carries data at up to 5.0 GT/s, board design should minimize connector and via transitions near the switch and maintain continuous reference planes. Firmware, port bifurcation, lane mapping, and endpoint resource requirements must also be validated for the selected adapter configuration.
PCIe Network Adapter
The PEX8696-AA50RBCF can support a high-port-count PCI Express network adapter or chassis manager that needs to expose multiple downstream fabrics to a host system. Its 24 ports and 96 lanes provide more expansion capacity than conventional workstation switches, making it useful for dense accelerator or communications backplanes. The design must account for connector density, cable or PCB reach, power budget, and airflow around the large FCBGA. Firmware-assisted monitoring and fault isolation should be reviewed against the host operating system and management software used in the final system.
Industrial Test and Measurement
The PEX8696-AA50RBCF fits industrial test and measurement chassis requiring shared access to many PCI Express instruments. Its 96 lanes and 24 ports can connect acquisition, signal-generation, and processing modules behind one upstream fabric, while Gen 2 operation at 5.0 GT/s supports legacy and current Gen 2 instrumentation. For reliable operation, include sufficient power-plane capacity, use low-loss routing strategies where link budgets require them, and validate thermal performance at the maximum expected board population. Access to individual port status and isolation behavior should be included in system diagnostics.
Impormasyon ng Talumpati sa Engineering for PEX8696-AA50RBCF — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PEX8696-AA50RBCG | PEX8696-AA50BCG | PEX8696-AA50BCF |
|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | 1156-FCBGA (35 x 35 mm) | 1156-FCBGA (35 x 35 mm) | 1156-FCBGA (35 x 35 mm) | 1156-FCBGA (35 x 35 mm) |
| PCI Express Generation | Gen 2 | Gen 2 | Gen 2 | Gen 2 |
| Maximum Data Rate | 5.0 GT/s per lane | 5.0 GT/s per lane | 5.0 GT/s per lane | 5.0 GT/s per lane |
| Port Count | 24 ports | 24 ports | 24 ports | 24 ports |
| Device Classification | PCI bus controller | PCI bus controller | PCI Express switch IC | PCI bus controller |
Pangunahing mga Pagkakaiba
- Very high downstream-port density (kumpara saPEX8696-AA50RBCG)
- Full 1156-ball fine-pitch integration (kumpara saPEX8696-AA50BCG)
- Gen 2 performance across every candidate (kumpara saPEX8696-AA50BCF)
Talaan ng Disenyo
Treat every enabled PCI Express differential pair as a controlled-impedance transmission line rather than a conventional low-speed connection. Use the Broadcom reference stackup and escape-routing geometry, maintain continuous reference planes across layer transitions, and minimize stubs, vias, and right-angle corners. Include connector and package-loss effects in channel simulation so the 5.0 GT/s Gen 2 interface has adequate eye and timing margin.
Plan the 1156-FCBGA power network around the exact ball assignments and current requirements shown in the manufacturer design material. Use short, low-impedance connections from regulators and decoupling capacitors to the device, with adequate plane area or vertical connectivity for transient current. Validate the complete rail network with a multi-conductor power-distribution model rather than relying on nominal supply voltage alone.
The 1156-ball package requires deliberate layer planning and a dense escape strategy. Follow the manufacturer-recommended ball map, preserve symmetry where specified, keep bypass components close to their assigned balls, and avoid placing high-speed routes beneath noisy power-conversion stages. Confirm assembly clearances, via-in-pad rules, solder-mask design, and package warpage assumptions with the board and assembly capability.
Impormasyon ng Pagsunod sa Kautusan
Broadcom's reliability documentation describes the PEX8696-AA50RBC family as using a lead-free solder-bump HFC-BGA package. Product-specific RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated and remain unknown.