PIC16F1707-E/P - 8-Bit 32MHz XLP MCU | Microchip Technology
MPN: PIC16F1707-E/P ✓ NakahandaPIC16F1707-E/P Ulas
A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals into one device. The PIC16F1707 belongs to the PIC16 family hierarchy of 8-bit RISC microcontrollers, providing a compact platform for monitoring, sensing, control, and communications tasks. Its on-chip resources reduce the need for external analog, timing, and communication components in cost-sensitive embedded systems.
The PIC16F1707-E/P provides on-chip operational amplifiers, a 10-bit ADC, Core Independent Peripherals, Zero Cross Detect, and Peripheral Pin Select. These features make it suitable for analog signal conditioning and autonomous control functions that would otherwise require additional discrete or integrated components. The 20-pin PDIP package supports through-hole assembly and is appropriate for prototypes, educational platforms, and industrial control boards that favor inspection and reworkability.
The MCU uses 256 bytes of SRAM for working data and 3.5 KB of flash memory for firmware. Its eight-bit architecture is designed for direct peripheral control rather than high-bandwidth computing. A 32 MHz clock allows the core to execute control logic and service peripheral events efficiently, while the XLP designation identifies the family’s low-power design focus for duty-cycled and battery-operated equipment.
Typical uses include motor and valve control, temperature or light monitoring, LED drivers, compact power supplies, and small sensor nodes. The integrated amplifiers can amplify weak analog inputs before ADC conversion, while Core Independent Peripherals can handle repetitive timing or signal events with less central-processor intervention. Peripheral Pin Select provides routing flexibility that can simplify board-level signal assignment.
The 20-pin PDIP outline favors through-hole construction and straightforward prototyping, but it occupies more board area than comparable surface-mount packages. Before committing to a PCB, verify the exact pin assignments, decoupling requirements, programming interface, oscillator options, and analog-pin limitations in the manufacturer datasheet. Firmware changes should also be validated against the production temperature range and the selected supply voltage.
This page organizes the device’s core specifications, verified source links, practical application guidance, and same-package replacement considerations into an engineering-focused overview. It is intended to support early design selection, BOM planning, and direct comparison with other 20-pin PIC microcontrollers without substituting the manufacturer’s complete pin and electrical tables.
Mga alternatibo na pwedeng ilagay na PIC16F1707-E/P — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC16F1707-E/P (parehas na form factor at footprint) — pagkakaiba sa Core Independent Peripherals, Package, Mounting Type, CPU Speed, Communication.
PIC16F1707-I/P
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F1708-I/P
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F1707-E/P Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit flash microcontroller |
| Architecture | PIC RISC |
| Maksimum na Taktiko ng Oras | 32 MHz |
| Program Memory | 3.5 KB (2K × 14 words) |
| Data Memory | 256 bytes RAM |
| ADC Resolution | 10 bits |
| Operating Voltage Range | 2.3 V to 5.5 V |
| Core Independent Peripherals | COG and Zero Cross Detect |
| Peripheral Pin Select | Supported |
| Packhaging | 20-pin PDIP |
| Uri ng Pagpapasok | Through-hole |
| Package Pitch | 0.300 in |
| Programming Memory Type | Flash |
| Low-Power Technology | PIC XLP |
| Tindminan RoHS | Compliant |
| I2C Interface | Supported |
| SPI Interface | Supported |
| CCP Peripheral | Supported |
Gabay sa Pin Configuration ng PIC16F1707-E/P 0.300 in
Pin configuration para sa PIC16F1707-E/P (0.300 in package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC16F1707-E/P.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC16F1707-E/P ay nararapat para sa 6 aplikasyons: Industrial Sensor and Control Node, Battery-Powered Monitoring Device, AC Zero-Cross Control, Compact Power-Supply Controller, LED Dimming and Driver, Motor and Valve Control.
Industrial Sensor and Control Node
The PIC16F1707-E/P fits compact sensor-and-control nodes because it combines a 10-bit ADC with integrated operational amplifiers, 256 bytes of RAM, and a 32 MHz core in a 20-pin PDIP package. The amplifiers can condition suitable sensor signals close to the sensing element, reducing the need for separate analog circuitry. Core Independent Peripherals can execute repetitive timing or signal-detection tasks while the CPU handles filtering and control. The 2.3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails, although the designer must verify each analog input’s allowed voltage and the device’s maximum operating frequency at the selected supply. In a through-hole industrial controller, the PDIP format simplifies inspection and hand rework, but its footprint should be checked against the enclosure and other through-hole components.
Inirekomenda
Battery-Powered Monitoring Device
The PIC16F1707-E/P is suitable for a duty-cycled battery-powered monitor because it belongs to Microchip’s PIC XLP low-power MCU family and provides autonomous Core Independent Peripherals. A design can wake periodically, sample an analog input through the 10-bit ADC, update the host or local indicator, and return to a low-power state without polling every timing edge in software. Peripheral Pin Select adds board-routing flexibility, while the 256-byte RAM is sufficient for compact sensor state and short acquisition buffers. Actual operating time must be calculated from the selected sleep mode, wake source, ADC and peripheral activity, supply voltage, and sensor load. The 20-pin PDIP package is particularly practical for hand-built monitors and low-volume instruments where through-hole assembly and easy firmware access are valuable.
Inirekomenda
AC Zero-Cross Control
The PIC16F1707-E/P can support AC zero-cross detection because it integrates Zero Cross Detect and Core Independent Peripherals alongside an 8-bit PIC RISC core. Zero Cross Detect can identify a relevant AC waveform crossing, allowing the firmware to time a triac, relay, or control pulse without relying entirely on a continuously running interrupt loop. The 32 MHz clock provides timing margin for communication and supervisory tasks, while the 10-bit ADC can support additional analog measurements. Designers should verify the applicable mains isolation strategy, external voltage-protection network, safe working distances, and the exact peripheral input requirements in the datasheet. The through-hole 20-pin package simplifies construction of a low-volume control board, but it does not eliminate the need for certified isolation and appropriate PCB clearances in hazardous mains environments.
Inirekomenda
Compact Power-Supply Controller
The PIC16F1707-E/P is useful in a compact power-supply controller because it combines 32 MHz control processing, flash program memory, a 10-bit ADC, and programmable peripheral routing in a 20-pin PDIP package. The MCU can monitor a feedback or input voltage, update control states, and supervise indicators or a communication interface without a separate discrete controller. Core Independent Peripherals can offload repetitive timing functions, allowing the CPU to concentrate on fault handling and supervisory logic. The stated 2.3 V to 5.5 V supply range is convenient for conventional 3.3 V and 5 V control rails, although the analog and digital signal limits must be respected. For production equipment, designers should assess whether the through-hole package has adequate creepage, clearance, thermal performance, and production-test compatibility in the intended power stage.
Inirekomenda
LED Dimming and Driver
The PIC16F1707-E/P can act as the controller in a small LED dimming module by generating timing signals, monitoring current or voltage through its 10-bit ADC, and applying user input through the microcontroller’s programmable I/O. Peripheral Pin Select can help route eligible functions to the available pins, while the 32 MHz core provides sufficient instruction throughput for basic dimming logic, status reporting, and fault detection. The on-chip operational amplifiers may also assist with signal conditioning where their electrical limits suit the selected feedback method. Designers must confirm the PWM-capable pins, LED-driver topology, transistor or MOSFET selection, and any required dimming update rate in the manufacturer documentation. A 20-pin PDIP assembly is advantageous for prototypes, teaching platforms, and serviceable fixtures where a small through-hole controller board is preferred.
Inirekomenda
Motor and Valve Control
The PIC16F1707-E/P can manage small motors or valves in cost-sensitive embedded equipment by combining fast 8-bit control with on-chip timers, capture/compare resources, ADC monitoring, and programmable peripheral routing. The MCU can decode position or timing inputs, update actuator commands, and monitor analog feedback while the Core Independent Peripherals handle repetitive events with low processor overhead. The 32 MHz operating capability supports responsive control loops, and the 256-byte RAM is suitable for a compact state machine rather than intensive data logging. The 20-pin PDIP package makes the controller straightforward to prototype and service in educational, appliance, or light-industrial equipment. Final selection requires checking whether the chosen motor interface, encoder input, PWM output, protection scheme, and required temperature range are fully supported by this specific device suffix and pin configuration.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC16F1707-E/P — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC16F1707-I/P | PIC16F1708-I/P |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| Product Type | 8-bit flash microcontroller | 8-bit flash microcontroller | 8-bit flash microcontroller |
| Temperature Ordering Code | -E/P | -I/P | -I/P |
| Mounting Type | Through-hole | Through-hole | Through-hole |
Pangunahing mga Pagkakaiba
- Integrated analog functionality reduces external circuitry (kumpara saPIC16F1708-I/P)
- Direct same-family ordering option (kumpara saPIC16F1707-I/P)
- 32 MHz control performance in a compact through-hole package (kumpara saPIC16F1708-I/P)
Talaan ng Disenyo
Route the PIC16F1707-E/P power, ground, programming, and analog pins according to the manufacturer’s 20-pin PDIP layout rather than assuming a generic 20-pin MCU pinout. Place the required decoupling capacitor close to the supply pins and keep analog inputs away from switching nodes and high-current return paths. Because Peripheral Pin Select changes eligible peripheral routing, review the complete pin-assignment configuration before releasing artwork.
Use a supply within the stated 2.3 V to 5.5 V range and confirm that the selected clock configuration is valid at the operating voltage and temperature. Decouple the supply locally and provide clean return paths for the ADC and operational-amplifier sections. Check analog input limits before using any pin as a signal input, especially in designs that also use the I/O pins for switching functions.
Do not treat equal package dimensions as proof of drop-in compatibility. PIC16F1707-I/P changes the ordering suffix, while PIC16F1708-I/P changes the family member and may alter memory, peripheral assignments, or firmware requirements. Validate the exact suffix, pin multiplexing, oscillator setup, programming configuration, and application code before substituting either candidate in a released design.
The 0.300-inch PDIP pitch supports straightforward through-hole assembly but consumes more board area than a comparable surface-mount package. Maintain adequate spacing around the device for soldering access, inspection, and rework. For mixed-signal layouts, keep the MCU and its decoupling away from relays, motors, power converters, and mains-connected switching nodes to limit electrical noise coupling.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is identified on the verified LCSC product listing. Other environmental and material compliance attributes are not established by the listed sources.