PIC16F1847T-I/MV - 8-Bit 32MHz 14KB Flash MCU | Microchip
MPN: PIC16F1847T-I/MV ✓ NakahandaPIC16F1847T-I/MV Ulas
A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile working memory (RAM), EEPROM for data retention, and a rich set of peripherals on one die. Within the product taxonomy, the PIC16F1847T-I/MV is a microcontroller -> 8-bit MCU -> enhanced mid-range core -> flash MCU -> power-efficient (XLP) MCU -> semiconductor. The 8-bit Harvard RISC architecture provides deterministic instruction execution for embedded control loops.
Key features include 32 MHz maximum CPU clock (8 MHz internal oscillator with 4x PLL), 14-bit instruction word, 16-level hardware stack, 12-bit ADC with computation (ADC2), 10-bit DAC, 8-/16-bit timers, ECCP, MSSP (I2C/SPI), EUSART, mTouch capacitive touch sensing, and nanoWatt XLP sleep currents as low as 20 nA. Integrated peripherals reduce BOM cost by eliminating external ADCs, op-amps, and touch front-end ICs.
The architecture uses a Harvard RISC core with separate program and data buses, a 16-level hardware stack with overflow/underflow reset, and an interrupt controller with automatic context saving. The XLP technology adds ultra-low-power sleep modes (Sleep, Idle, Doze) and peripheral module disable to minimise quiescent draw in battery-powered designs. The device operates across 2.5V to 5.5V with brown-out-reset and an internal voltage reference.
Typical applications include capacitive touch user interfaces (mTouch), battery-powered sensor nodes, LED lighting control, low-power IoT end nodes, and human-machine interface (HMI) panels. The compact UQFN-28 footprint makes it well suited to space-constrained wearables and consumer appliances where PCB area is at a premium.
When designing with this MCU, allocate a 0.1uF decoupling capacitor adjacent to each VDD pin and keep the trace from ICSPDAT/ICSPCLK to the programming header shorter than 5 cm to ensure reliable in-circuit serial programming. The 'T' suffix denotes Tape & Reel packaging; the 'I' suffix indicates the -40C to +85C industrial temperature grade, while '/MV' specifies the 28-pin UQFN 4x4 mm package.
This page synthesises distributor pricing, drop-in same-package alternatives, and practical design notes for the PIC16F1847T-I/MV that are not available in the manufacturer datasheet alone.
Mga alternatibo na pwedeng ilagay na PIC16F1847T-I/MV — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC16F1847T-I/MV (parehas na form factor at footprint) — pagkakaiba sa Package, Operating Temperature, Timers, Maximum CPU Speed, Mounting Type.
PIC16F1847-I/MV
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC16F1847-I/P
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F1847-E/P
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F1827T-I/MV
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F1847T-I/MV Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | PIC16 Enhanced Mid-Range 8-bit RISC |
| Maximum CPU Speed | 32 MHz (8 MHz internal oscillator with 4x PLL) |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Data EEPROM | 256 bytes |
| Supply Voltage (VDD) | 2.5 V to 5.5 V |
| I/O Pins | 16 |
| ADC | 12-bit with computation (ADC2) |
| DAC | 10-bit |
| Timers | 8-/16-bit (multiple) |
| Communication Peripherals | EUSART, MSSP (I2C/SPI), mTouch capacitive touch |
| Capture/Compare/PWM | ECCP + CCP modules |
| Low-Power Technology | nanoWatt XLP (sleep current down to 20 nA typical) |
| Temperature na Operasyon | -40C to +85C (Industrial, 'I' grade) |
| Packhaging | 28-pin UQFN 4x4 mm |
| Uri ng Pagpapasok | Surface Mount |
| Programming/Debug | ICSP via PICkit 3, MPLAB ICD 3, MPLAB Snap |
| Tindminan RoHS | Compliant |
Pin Configuration ng PIC16F1847T-I/MV
| Pin 1 | RA0/VCAP — Digital I/O / voltage regulator output capacitor |
| Pin 2 | RA1 — Digital I/O |
| Pin 3 | RA2 — Digital I/O / analog input |
| Pin 4 | RA3 — Digital I/O / MCLR |
| Pin 5 | RA4 — Digital I/O / analog input |
| Pin 6 | RA5 — Digital I/O / analog input |
| Pin 7 | RA6 — Digital I/O |
| Pin 8 | RA7 — Digital I/O |
| Pin 9 | VSS — Ground reference |
| Pin 10 | VDD — Positive supply voltage |
| Pin 11 | RB4 — Digital I/O / ICSPDAT |
| Pin 12 | RB5 — Digital I/O |
| Pin 13 | RB6 — Digital I/O / ICSPCLK |
| Pin 14 | RB7 — Digital I/O |
| Pin 15 | VSS — Ground reference |
| Pin 16 | VDD — Positive supply voltage |
| Pin 17 | RC0 — Digital I/O / analog input |
| Pin 18 | RC1 — Digital I/O / analog input |
| Pin 19 | RC2 — Digital I/O / analog input |
| Pin 20 | RC3 — Digital I/O / analog input / SCL |
| Pin 21 | RC4 — Digital I/O / SDA |
| Pin 22 | RC5 — Digital I/O |
| Pin 23 | RC6 — Digital I/O / TX |
| Pin 24 | RC7 — Digital I/O / RX |
| Pin 25 | RB0 — Digital I/O / analog input |
| Pin 26 | RB1 — Digital I/O / analog input |
| Pin 27 | RB2 — Digital I/O / analog input |
| Pin 28 | RB3 — Digital I/O / analog input |
Tipikal na mga Gamit
PIC16F1847T-I/MV ay nararapat para sa 6 aplikasyons: Capacitive Touch User Interface, Battery-Powered Wireless Sensor Node, LED Lighting Control, Home Appliance Control Board, Industrial HMI Panel, IoT Edge Sensor Aggregator.
Capacitive Touch User Interface
The PIC16F1847T-I/MV's integrated mTouch peripheral with up to 16 capacitive-sensing channels supports robust touch buttons, sliders, and proximity sensors in appliance and consumer-electronics HMIs. Its Charge Time Measurement Unit (CTMU) provides noise-immune sensing, while XLP nanoWatt technology keeps sleep current below 20 nA so battery-powered remotes and panels can run for years on a single coin cell. The 28-pin UQFN 4x4 mm package fits behind a glass or plastic overlay, leaving board area for the power supply and wireless module.
Inirekomenda
Battery-Powered Wireless Sensor Node
With XLP nanoWatt sleep currents as low as 20 nA, the PIC16F1847T-I/MV excels as the host MCU for sub-1 GHz or BLE sensor endpoints reporting temperature, humidity, or occupancy. The 32 MHz core wakes in microseconds to service ADC2 conversions, encrypt payloads, and transmit via SPI-attached radios before returning to deep sleep. The 256 B EEPROM stores calibration constants without wearing Flash, and the 2.5V to 5.5V supply range allows direct connection to a single Li-ion or two AA cells without LDO overhead.
Inirekomenda
LED Lighting Control
The PIC16F1847T-I/MV drives multi-channel LED fixtures using its ECCP/CCP PWM modules with up to 10-bit resolution, supporting smooth dimming and colour-mixing across RGBA or tunable-white arrays. The 12-bit ADC2 with computation enables closed-loop current sensing for constant-luminance output without an external op-amp, while the 10-bit DAC can drive an analog reference for warm-dim curves. UQFN-28 4x4 mm packaging is small enough to integrate into MR16 bulbs, downlights, and strip-light controllers.
Inirekomenda
Home Appliance Control Board
In washing machines, dishwashers, and coffee makers, the PIC16F1847T-I/MV serves as the main user-interface and motor-control MCU, replacing multiple discrete timers and op-amps. Its EUSART links to a Wi-Fi or BLE module for smart-appliance connectivity, the MSSP drives I2C sensors, and the ECCP module generates triac-firing pulses for AC load control. The 14 KB Flash accommodates state-machine firmware plus a USB-CDC bootloader for field updates, all within the 28-pin UQFN footprint.
Inirekomenda
Industrial HMI Panel
The PIC16F1847T-I/MV drives small graphical or segment LCDs via its mTouch buttons and PWM backlight control, replacing mechanical keypads in factory-floor controllers. The 12-bit ADC with computation monitors 4-20 mA loops or thermistor inputs without external conditioning, while the EUSART provides Modbus RTU communication with PLCs. The industrial -40C to +85C temperature grade and wide 2.5V to 5.5V supply tolerance suit harsh control-cabinet environments.
Inirekomenda
IoT Edge Sensor Aggregator
As an edge aggregator in IoT nodes, the PIC16F1847T-I/MV collects data from multiple I2C sensors (temperature, pressure, accelerometer) and forwards pre-processed packets to a host MCU or gateway over UART/SPI. The 14 KB Flash holds MQTT-SN or LoRaWAN stacks, the 1 KB RAM buffers sensor frames, and the XLP sleep modes allow duty-cycled operation on energy-harvested power. The compact UQFN-28 package enables dense sensor-array layouts on small PCBs.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC16F1847T-I/MV — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC16F1847-I/MV | PIC16F1847-I/P | PIC16F1827T-I/MV |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | UQFN-28 (4x4 mm) | UQFN-28 (4x4 mm) - same | PDIP-18 - through-hole, larger | UQFN-28 (4x4 mm) - same |
| Flash Memory | 14 KB | 14 KB | 14 KB | 7 KB |
| RAM | 1 KB | 1 KB | 1 KB | 384 B |
| EEPROM | 256 B | 256 B | 256 B | 256 B |
| Maximum CPU Speed | 32 MHz / 32 MIPS | 32 MHz / 32 MIPS | 32 MHz / 32 MIPS | 32 MHz / 32 MIPS |
| I/O Pins | 16 | 16 | 12 (PDIP-18) | 16 |
| ADC | 12-bit with computation | 12-bit with computation | 12-bit with computation | 10-bit (no ADC2) |
| mTouch Support | Yes (up to 16 channels) | Yes | Yes | No |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Pangunahing mga Pagkakaiba
- Highest memory density in UQFN-28 PIC16 family (kumpara saPIC16F1827T-I/MV)
- Integrated mTouch capacitive touch peripheral (kumpara saPIC16F1827T-I/MV)
- ADC2 computation engine offloads DSP from CPU (kumpara saPIC16F1827T-I/MV)
- Industrial-grade 32 MHz XLP in UQFN-28 (kumpara saPIC16F1847-I/P (PDIP-18))
Talaan ng Disenyo
Place a 0.1uF decoupling capacitor adjacent to each VDD pin (pins 10 and 16 on the UQFN-28 package) and a single 10uF bulk capacitor on the supply rail. For battery-powered designs using XLP sleep modes, the MCP1700 LDO provides a 1.6uA quiescent regulator that preserves nanoWatt sleep performance better than higher-Iq alternatives.
Keep ICSPDAT (RB4) and ICSPCLK (RB6) traces shorter than 5 cm and route them away from switching power nodes to ensure reliable in-circuit serial programming. The UQFN-28 exposed thermal pad must be soldered to a copper pour connected to VSS to meet thermal and mechanical reliability targets; do not leave it floating.
Pin 3 on the UQFN-28 PIC16F1847T-I/MV is dual-function RA3/MCLR. To use the device's internal MCLR disable feature for clean resets, configure the Configuration Word (CONFIG_MCLRE = OFF) before code development. Avoid omitting the 1kohm pull-up on MCLR when MCLR is enabled, otherwise the device can enter programming mode intermittently on noisy power rails.
For capacitive-touch sensing, dedicate adjacent ground copper around the touch electrodes and route the CTMU charge-discharge trace as a short, guarded track. Avoid running switching signals (PWM, SPI clock) within 3 mm of touch sensors to prevent false triggers. Microchip's AN1258 application note provides reference layouts for slider and button patterns.
Impormasyon ng Pagsunod sa Kautusan
RoHS and REACH compliant per Microchip product page; lead-free finish (Matte Tin). Industrial -40C to +85C temperature grade only - AEC-Q100 automotive variants require the PIC16F1847T-E/MV (extended grade) or PIC16F1847T-I/MVVAO automotive-qualified part numbers.
