PIC16F72T-E/SO - 8-Bit 20MHz Flash MCU | Microchip
MPN: PIC16F72T-E/SO ✓ NakahandaPIC16F72T-E/SO Ulas
An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, I/O ports, timers, and optional analog conversion functions on one device. The PIC16F72 belongs to the hierarchy of embedded MCU, 8-bit microcontroller, RISC-based microcontroller, and semiconductor. Its relatively small instruction set and 35 single-word instructions simplify firmware development for compact control systems.
Key device features include 200 ns instruction execution, 3.5 KB of Flash program memory organized as 2K by 14 bits, 128 bytes of RAM, 22 I/O pins, and five 8-bit A/D converter channels. Two additional timers are identified by Microchip for timing and event-control duties. Program Flash supports in-circuit programming, allowing firmware to be loaded and updated without using a separate programmable device in the finished assembly.
The PIC16F72 architecture provides a compact RISC-based control platform rather than the register and peripheral complexity associated with larger 16-bit or 32-bit microcontrollers. Its 20 MHz operating speed and 200 ns instruction execution provide deterministic control for motor, instrument, and data-acquisition designs. Five multiplexed 8-bit ADC channels allow the MCU to monitor analog inputs directly, reducing the need for external converters when moderate measurement resolution is sufficient.
Typical applications include industrial controllers, temperature or process monitoring, keypad-based instruments, motor-control auxiliaries, appliance interfaces, and embedded measurement modules. The combination of 22 I/O pins and five ADC channels provides a useful balance between analog observability and digital control capacity. For designs requiring more memory, resolution, or peripheral functionality, a larger PIC family member may be a better architectural choice.
PCB implementation should preserve the manufacturer's recommended decoupling and programming access. Place the primary supply capacitor close to VDD, route MCLR/VPP for reliable programming and reset behavior, and isolate analog inputs from switching nodes to reduce conversion noise. The SOIC package is easy to assemble manually, but its 0.300-inch lead pitch requires adequate spacing for soldering, inspection, and rework.
This page combines manufacturer specifications, replacement guidance, package details, and application-oriented design guidance for engineers evaluating the PIC16F72T-E/SO. It also distinguishes genuine same-footprint alternatives from options that require package or PCB changes, helping simplify legacy-product maintenance and new embedded-control development.
Mga alternatibo na pwedeng ilagay na PIC16F72T-E/SO — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC16F72T-E/SO (parehas na form factor at footprint) — pagkakaiba sa Package, Instruction Execution Time, A/D Converter, Architecture, Program Memory Type.
PIC16F72T-I/SO
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F72-E/SO
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F72T-E/SO Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 8-bit CMOS Flash microcontroller |
| Architecture | RISC-based PIC architecture |
| Maksimum na Taktiko ng Oras | 20 MHz |
| Instruction Execution Time | 200 ns |
| Program Memory | 3.5 KB Flash (2K x 14 bits) |
| Data Memory | 128 bytes RAM |
| General-Purpose I/O Pins | 22 pins |
| A/D Converter | 5-channel 8-bit A/D converter |
| Timer Count | 2 additional timers |
| Instruction Set | 35 single-word instructions |
| Packhaging | 28-pin SOIC |
| Package Width | 7.50 mm |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Extended grade |
| Program Memory Type | CMOS Flash |
Pin Configuration ng PIC16F72T-E/SO
| Pin 1 | OSC1/CLKO — Oscillator input or clock output |
| Pin 2 | OSC2/CLKI — Oscillator output or clock input |
| Pin 3 | RA0/AN0 — Port A input/output or analog input AN0 |
| Pin 4 | RA1/AN1 — Port A input/output or analog input AN1 |
| Pin 5 | RA2/AN2/VREF- — Port A input/output, analog input AN2, or negative reference |
| Pin 6 | RA3/AN3/VREF+ — Port A input/output, analog input AN3, or positive reference |
| Pin 7 | RA4/T0/C1OUT — Port A input/output, timer input, or comparator output |
| Pin 8 | RA5/AN4/SS/C2OUT — Port A input/output, analog input AN4, or peripheral output |
| Pin 9 | VSS — Ground reference |
| Pin 10 | RA7/AN5 — Port A input/output or analog input AN5 |
| Pin 11 | RA6/AN6 — Port A input/output or analog input AN6 |
| Pin 12 | RC0/T1OSO — Port C input/output or timer oscillator output |
| Pin 13 | RC1/T1OSI/CCP2 — Port C input/output, timer oscillator input, or capture/compare |
| Pin 14 | RC2/CCP1 — Port C input/output or capture/compare input |
| Pin 15 | RC3/SCK/SCL — Port C input/output or synchronous serial clock |
| Pin 16 | RC4/SDI/SDA — Port C input/output or serial data input |
| Pin 17 | RC5/SDO — Port C input/output or serial data output |
| Pin 18 | VDD — Positive supply voltage |
| Pin 19 | VSS — Ground reference |
| Pin 20 | T1CKI — Timer 1 clock input |
| Pin 21 | PWRDT/CP — Power-down timer or capacitor connection |
| Pin 22 | RB0/INT — Port B input/output or external interrupt |
| Pin 23 | RB1 — Port B input/output |
| Pin 24 | RB2 — Port B input/output |
| Pin 25 | RB3 — Port B input/output |
| Pin 26 | RB4 — Port B input/output |
| Pin 27 | RB5 — Port B input/output |
| Pin 28 | MCLR/VPP — Master clear reset and programming voltage input |
Tipikal na mga Gamit
PIC16F72T-E/SO ay nararapat para sa 6 aplikasyons: Industrial Process Monitoring, Temperature and Environmental Control, Appliance and Equipment Interface, Simple Motor and Actuator Control, Embedded Data Acquisition Module, Programmable Logic Controller.
Industrial Process Monitoring
PIC16F72T-E/SO fits compact process-monitoring equipment that must acquire several analog inputs and enforce digital thresholds without a higher-cost controller. Its five-channel 8-bit A/D converter can monitor pressure, temperature, level, or position signals, while 22 I/O pins support alarms, indicator lamps, relays, and a local keypad. The 20 MHz operating speed and 200 ns instruction execution allow responsive sampling and control loops. The device is normally placed between sensor interfaces and the controlled equipment, with supply decoupling close to VDD and analog traces routed away from switching nodes. The 3.5 KB Flash budget is suitable for calibration tables and compact supervisory logic. The extended-temperature-grade suffix should be matched to the cabinet's environmental requirements rather than selected solely for pin compatibility.
Inirekomenda
Temperature and Environmental Control
PIC16F72T-E/SO is appropriate for a temperature controller or environmental regulator with local sensing, display output, and actuator control. The five 8-bit ADC channels can support one sensing channel plus reference or feedback measurements, while the 22 I/O pins can drive a display, keys, buzzer, heater indicator, or relay driver. A 20 MHz clock provides sufficient execution headroom for periodic sampling, filtering, hysteresis, and safety timeout logic within the available 3.5 KB of Flash. The 128-byte RAM is useful for short-lived samples and control variables but requires careful allocation in display-heavy designs. Firmware should convert sensor readings into scaled engineering units and include sensor-failure detection. The 28-pin SOIC package remains inspectable and repairable in industrial products assembled in moderate volumes.
Inirekomenda
Appliance and Equipment Interface
PIC16F72T-E/SO can serve as the embedded controller in an appliance or specialized equipment module that combines discrete controls with analog sensing. Its 22 I/O pins provide flexible connections to switches, indicator outputs, interlocks, displays, and status LEDs, while the five 8-bit ADC channels support pot sensing, battery or supply measurement, and basic sensor inputs. The RISC-based 8-bit core and 35-instruction command set simplify small control firmware and improve code density. Because program memory is limited to 3.5 KB, developers should avoid placing extensive user-interface graphics or communications stacks on the device and instead reserve it for deterministic supervisory logic. In a mains-connected product, maintain the required separation between low-voltage control electronics and hazardous power circuitry. The extended-temperature option supports designs with a wider internal ambient range.
Inirekomenda
Simple Motor and Actuator Control
PIC16F72T-E/SO is useful for small motor, valve, or actuator-control subsystems where deterministic sequencing is more important than high protocol bandwidth. Its two additional timers can support timing functions beyond basic input capture and output compare, while 22 I/O pins allow direct control of motor-enable signals, direction logic, limit inputs, and status outputs. The 20 MHz operating speed and 200 ns instruction execution provide a practical basis for responsive debouncing and motion sequencing. If analog feedback is required, the five 8-bit ADC channels can monitor current proxies or position sensors, but a motor drive stage still needs appropriate transistor, driver, protection, and isolation components. Firmware must include startup limits and safe-state behavior for power loss. Package placement should separate sensitive analog and reset paths from high-current switching traces.
Inirekomenda
Embedded Data Acquisition Module
PIC16F72T-E/SO can implement a compact standalone data-acquisition module for slow-changing analog signals where 8-bit resolution is adequate. Its five-channel 8-bit ADC provides simultaneous access to sensor lines through multiplexing, while 22 I/O pins can carry channel-enable signals, data-ready indications, memory controls, and communications handshakes. The 3.5 KB Flash program memory supports acquisition routines and calibration logic, and 128 bytes of RAM can buffer immediate samples or maintain short rolling statistics. A 20 MHz clock allows periodic conversion, scaling, filtering, and threshold evaluation without requiring a high-performance processor. Designers should use the manufacturer timing and input-impedance guidance when selecting source impedances. External buffering may be necessary for high-value sensors. Place analog and digital return paths carefully to minimize conversion error and supply noise.
Inirekomenda
Programmable Logic Controller
PIC16F72T-E/SO can implement a compact programmable logic controller for equipment built around discrete I/O and a small number of analog inputs. Twenty-two I/O pins provide sufficient connectivity for pushbuttons, selector switches, relays, lamps, and interlock signals, while five ADC channels expand the controller into basic analog supervision. Its RISC-based 8-bit architecture and 200 ns instruction execution are suitable for deterministic ladder-style logic, state machines, and debounce routines. The 128-byte RAM imposes a modest working-data limit, so complex historical logging should use external storage or a larger MCU. The 3.5 KB Flash capacity remains adequate for compact control tables and communication routines. During PCB design, provide a stable MCLR/VPP reset circuit and accessible programming pads so firmware can be serviced without redesigning the controller.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC16F72T-E/SO — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC16F72T-I/SO | PIC16F72-E/SO |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| CPU Architecture | 8-bit RISC | 8-bit RISC | 8-bit RISC |
| Maximum Clock | 20 MHz | 20 MHz | 20 MHz |
| General-Purpose I/O | 22 pins | 22 pins | 22 pins |
| A/D Converter | 5-channel 8-bit | 5-channel 8-bit | 5-channel 8-bit |
| Temperature-Grade Suffix | E | I | E without T suffix |
| Instruction Execution | 200 ns | 200 ns | 200 ns |
Pangunahing mga Pagkakaiba
- Identical 28-pin SOIC core with a direct family substitution path (kumpara saPIC16F72T-I/SO)
- Extended-temperature-grade ordering option (kumpara saPIC16F72T-I/SO)
- Compact Flash MCU with integrated analog measurement (kumpara saPIC16F72-E/SO)
Talaan ng Disenyo
Place the primary supply-decoupling capacitor immediately between VDD and VSS, and route the ground return without long loops around the MCU. Keep the 20 MHz oscillator path short and position its load capacitor close to the relevant pins. Reserve accessible test or programming pads for MCLR/VPP and the programming interface so the assembled board can be serviced without removing the entire product.
Separate analog inputs from digital switching paths and route analog grounds toward the MCU's quiet ground region. The five 8-bit ADC channels are suitable for moderate-resolution measurements, but high-impedance sources may require external buffering to preserve conversion accuracy. Review source impedance and acquisition-time requirements in the manufacturer datasheet before selecting sensor networks or long analog traces.
Do not confuse the -E/SO suffix with PIC16F72T-I/SO or PIC16F72T-E/SS. The I/SO part has a different temperature-grade designation, while /SS uses a different package and cannot be mounted on the same land pattern without a PCB redesign. Before substituting any device, confirm the exact MPN, 28-pin SOIC footprint, operating-temperature range, programming configuration, and required qualification.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer product page and family datasheet do not provide explicit compliance conclusions in the cited content. Confirm current declarations with Microchip before qualification.