PIC16F877AT-I/L - 8-Bit 20MHz MCU, 14KB Flash | Microchip
MPN: PIC16F877AT-I/L ✗ Tapus ng BuhayPIC16F877AT-I/L Ulas
A microcontroller is a compact computer-in-a-chip that executes firmware to monitor inputs and control outputs. The PIC16F877A belongs to the PIC16F family, combining a RISC-based architecture, Flash memory, RAM, peripherals, and I/O in one integrated device. Its 8-bit architecture and 20 MHz maximum frequency make it suitable for industrial automation, consumer electronics, instrumentation, and control systems.
Key features include an 8-channel, 10-bit ADC, 14 KB of Flash memory, and 33 I/O. The supplied distributor data identifies the device as an 8-bit MCU with 14 KB Flash, 368 bytes of RAM, 33 I/O, and a 20 MHz maximum operating frequency. The “AT” portion of the MPN identifies the specified device variant, while “/L” identifies the leaded package option.
The PIC16F877AT-I/L combines a conventional 8-bit control core with on-chip peripherals that reduce external component count. Its Flash-based program memory supports in-system programming and field firmware updates when the system design provides the required programming interface. The 10-bit ADC enables analog sensor acquisition, while the 33 I/O pins provide digital control and communication connections.
Typical applications include industrial automation and machine control, consumer appliances, electronic instrumentation, and automotive systems. In an industrial controller, the MCU can read sensors, execute control logic, drive indicators, and coordinate communication interfaces. In an automotive system, the extended temperature specification supports operation from -40°C to +85°C, subject to the complete system requirements.
Designers should preserve the 44-pin PLCC footprint and verify all pin assignments, power, oscillator, programming, and peripheral connections against the manufacturer datasheet. The PLCC package is not a leadless chip carrier; its gull-wing leads are soldered around the package body. Adequate decoupling and correct oscillator layout are essential for reliable embedded operation.
This page combines verified distributor information, manufacturer-related references, structured comparisons, and practical design guidance for engineers evaluating the PIC16F877AT-I/L.
Mga alternatibo na pwedeng ilagay na PIC16F877AT-I/L — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC16F877AT-I/L (parehas na form factor at footprint) — pagkakaiba sa Timers, Package, ADC, Mounting Type, Operating Temperature.
PIC16F877A-I/L
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16LF877A-I/L
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MBRA130LT3G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC16F874A-I/L
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16C77-20/L
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F877AT-I/L Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit microcontroller |
| Maximum Operating Frequency | 20 MHz |
| Program Memory | 14 KB Flash (8K x 14) |
| RAM | 368 bytes |
| Digital I/O | 33 I/O |
| ADC | 8-channel, 10-bit |
| Temperature na Operasyon | -40°C to +85°C |
| Packhaging | 44-pin PLCC (PQCC), 16.59 mm x 16.59 mm |
| Architecture | RISC-based 8-bit |
| Program Memory Type | CMOS Flash |
| Uri ng Pagpapasok | Surface mount |
| Manufacturer | Microchip Technology |
| Device Family | PIC16F87XA |
| Instruction Execution | 200 ns |
| Instruction Set | 35 single-word instructions |
Gabay sa Pin Configuration ng PIC16F877AT-I/L 44-pin plcc (pqcc), 16.59 mm x 16.59 mm
Pin configuration para sa PIC16F877AT-I/L (44-pin plcc (pqcc), 16.59 mm x 16.59 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC16F877AT-I/L.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC16F877AT-I/L ay nararapat para sa 6 aplikasyons: Industrial Automation Controller, Sensor Monitoring System, Consumer Appliance Control, Automotive Auxiliary Control, Electronic Instrumentation, Communication and Data Acquisition Hub.
Industrial Automation Controller
The PIC16F877AT-I/L fits industrial automation controllers that require an 8-bit control core, 33 digital I/O, and an 8-channel, 10-bit ADC. It can execute sequencing and closed-loop logic while acquiring analog feedback from pressure, temperature, level, or position sensors. The 20 MHz maximum frequency provides timing headroom for interrupt-driven control tasks, while 14 KB of Flash supports control firmware, configuration tables, and diagnostic routines. The 44-pin PLCC package supports a wired-through-hole or compatible PCB land pattern, but the exact pin assignment, isolation strategy, protection network, and regulatory requirements must be verified against the datasheet and system architecture.
Inirekomenda
Sensor Monitoring System
The PIC16F877AT-I/L is suitable for a multi-channel sensor-monitoring system because the verified data identifies an 8-channel, 10-bit ADC and 33 I/O. The microcontroller can scan analog inputs, apply calibration and filtering in firmware, compare thresholds, and drive alarm or display-control outputs. Its 14 KB Flash capacity accommodates measurement tables, compensation coefficients, and communication routines, while 368 bytes of RAM supports sampled data and status variables. Because the supplied data does not specify the ADC reference voltage, acquisition time, input impedance, or channel multiplexing details, analog front-end and timing decisions must be based on the manufacturer datasheet rather than inferred specifications.
Inirekomenda
Consumer Appliance Control
The PIC16F877AT-I/L can serve as the embedded controller in a consumer appliance where a deterministic 8-bit machine interface is sufficient. Its 33 I/O lines can support switches, indicators, relays, display segments, and control outputs, while the 8-bit ADC can monitor temperature, position, or load-related analog signals. The 20 MHz operating class allows responsive interrupt and timer handling, and the 14 KB Flash memory supports menu logic, operating profiles, and safety-state handlers. The 44-pin PLCC footprint may simplify compatibility with an existing appliance platform, but mains isolation, surge protection, thermal margins, and user-accessible safety controls must be designed independently of the MCU.
Inirekomenda
Automotive Auxiliary Control
The PIC16F877AT-I/L can be evaluated for auxiliary automotive control functions because the verified data specifies operation from -40°C to +85°C and provides 33 I/O for switches, actuators, and sensors. The 8-channel ADC can support analog monitoring, while the 8-bit core can implement state machines and diagnostic logic. This use requires a separate automotive qualification review because the supplied data does not state AEC-Q100 qualification, transient immunity, load dump performance, or EMC limits. Power architecture should include reverse-battery and surge protection, and safety-critical decisions should not rely on this component until the complete vehicle-level requirements are verified.
Inirekomenda
Electronic Instrumentation
The PIC16F877AT-I/L is appropriate for electronic instrumentation that combines measurement, control, and local communication. The 10-bit ADC can digitize several analog channels, while 33 I/O can operate front-panel buttons, status indicators, relay drivers, and display interfaces. The 14 KB Flash memory provides space for calibration constants, measurement algorithms, command handling, and logging routines. The 368-byte RAM figure should be checked against the chosen buffering strategy, especially for waveform capture or communications. A practical design should isolate analog and digital returns, place decoupling close to supply pins, and provide a stable clock and programming interface as specified by the manufacturer.
Inirekomenda
Communication and Data Acquisition Hub
The PIC16F877AT-I/L can be used in a compact data-acquisition hub when the system needs a manageable 8-bit controller with moderate Flash and RAM. It can collect ADC samples, manage digital status inputs, and forward information through a UART, SPI, or other peripheral available on the exact device variant. The 20 MHz clock supports responsive interrupt handling, while 33 I/O leaves flexibility for status LEDs, control signals, and communication transceivers. The supplied data does not identify specific communication peripherals or their electrical limits, so the exact datasheet and pin multiplexing must be checked before selecting external transceivers or assigning connector pins.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC16F877AT-I/L — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC16F877A-I/L | PIC16LF877A-I/L | MBRA130LT3G | PIC16F874A-I/L | PIC16C77-20/L |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Pangunahing mga Pagkakaiba
- Established PIC16F87XA platform with Flash program memory (kumpara saPIC16C77-20/L)
- Direct same-family ordering candidate (kumpara saPIC16F877A-I/L)
- Integrated analog acquisition capability (kumpara saPIC16C77-20/L)
- Broad I/O availability for embedded control (kumpara saPIC16LF877A-I/L)
Talaan ng Disenyo
Use the 44-pin PLCC footprint and verify every pad and pin number against the exact PIC16F877AT-I/L datasheet drawing. PLCC packages have gull-wing leads and are not interchangeable with QFN, LQFP, or plastic DIP land patterns without an adapter or PCB redesign. Confirm body size, lead pitch, pin-1 orientation, solderable land geometry, and assembly clearance before releasing a layout.
Place the required supply decoupling capacitors at the PIC16F877AT-I/L power pins with the shortest possible traces and a clear return path to the device ground reference. The supplied data does not specify the power-supply voltage or capacitor values, so do not select those values from this page alone. Follow the manufacturer datasheet for supply limits, decoupling, oscillator, programming, and power-control requirements.
Separate analog inputs and ADC references from high-current switching outputs wherever the PCB area permits. Keep sensor traces short, use a continuous ground reference where appropriate, and route oscillator traces away from switching nodes and communication edges. The supplied data does not provide ADC acquisition-time or reference-voltage values, so analog filtering and grounding must be validated against the complete datasheet.
Do not treat a same-package name as proof of drop-in compatibility. Before replacing PIC16F877AT-I/L with a related order code, compare the complete pinout, Flash programming model, voltage range, oscillator configuration, ADC behavior, interrupts, I/O direction limits, and package markings. In particular, the related PIC16C77-20/L candidate uses a different memory technology according to the supplied comparison snippet.
Impormasyon ng Pagsunod sa Kautusan
Compliance information was not included in the supplied verified data. Operating temperature is -40°C to +85°C, but this does not by itself establish AEC-Q100 qualification or any regulatory compliance.
