PIC24EP32GP202-E/SP - 60 MIPS 32KB Flash MCU | Microchip
MPN: PIC24EP32GP202-E/SP ✓ NakahandaPIC24EP32GP202-E/SP Ulas
A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor device. The PIC24EP32GP202 belongs to the PIC24E general-purpose MCU family, which sits within the broader embedded-controller and semiconductor hierarchy. Its dedicated analog and timing resources can reduce the need for separate amplifiers, comparator circuitry, and specialized event-generation logic while keeping the design compact.
Key features include a 16-bit architecture, 32 KB of Flash memory organized as 10.7K by 24 words, 4 KB of RAM, and operation up to 60 MHz. The integrated analog resources include op amps and comparators, while the Peripheral Trigger Generator supports precise hardware-triggered operations. The -E/SP ordering code identifies the extended-temperature, 28-pin SPDIP configuration, making the device suitable for industrial and automotive-temperature embedded control environments.
The PIC24E architecture provides high code density and combines conventional control processing with analog peripherals. Internal op amps can amplify sensor signals before digital conversion, comparators can monitor thresholds, and the PTG can offload repetitive timing and sequencing operations from firmware. This mixed-signal integration is particularly useful when the board area, component count, or deterministic response of a control subsystem must be optimized.
Typical applications include industrial sensor controllers, motor and actuator interfaces, embedded measurement systems, compact power-control modules, automotive accessory controllers, and general-purpose embedded products. The through-hole SPDIP package also remains practical for prototypes, educational systems, test fixtures, and industrial assemblies that favor socketed or leaded components over very small surface-mount packages.
Designers should confirm the complete pin assignment, peripheral multiplexing, electrical limits, and programming configuration in the manufacturer datasheet before routing the PCB. The 28-pin package constrains the number of available I/O and power pins, so analog inputs, comparator outputs, communication functions, and debug interfaces must be allocated together rather than independently. Adequate decoupling and careful routing of sensitive analog signals are particularly important when op amps and comparators share the same board with switching nodes.
This product page combines the exact device identity, electrical memory capacity, package details, application guidance, practical design notes, and a pin-compatible temperature-grade alternative. It is intended to help engineers compare MCU architecture, analog integration, package choice, and sourcing requirements before committing the PIC24EP32GP202-E/SP to a new embedded-control design.
Mga alternatibo na pwedeng ilagay na PIC24EP32GP202-E/SP — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24EP32GP202-E/SP (parehas na form factor at footprint) — pagkakaiba sa Integrated Comparators, Integrated Op Amps, Peripheral Trigger Generator.
PIC24EP32GP202-I/SP
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24EP32GP202-E/SP Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit general-purpose microcontroller |
| Maximum Performance | 60 MIPS |
| Flash Program Memory | 32 KB (10.7K x 24 words) |
| SRAM | 4 KB |
| Architecture | 16-bit |
| Integrated Op Amps | Present |
| Integrated Comparators | Present |
| Peripheral Trigger Generator | Present |
| Packhaging | 28-pin SPDIP |
| Terminal Count | 28 pins |
| Uri ng Pagpapasok | Through-hole |
| Package Shape | Rectangular DIP |
| Temperature Grade | Extended automotive |
| Manufacturer Core Family | PIC24E general-purpose MCU |
| ADC Performance | Enhanced |
| CTMU Support | Present |
Gabay sa Pin Configuration ng PIC24EP32GP202-E/SP rectangular dip
Pin configuration para sa PIC24EP32GP202-E/SP (rectangular dip package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC24EP32GP202-E/SP.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC24EP32GP202-E/SP ay nararapat para sa 6 aplikasyons: Industrial Sensor Controller, Motor and Actuator Control, Automotive Accessory Controller, Embedded Measurement Instrument, Compact Power-Control Module, Education and Rapid Prototyping.
Industrial Sensor Controller
The PIC24EP32GP202-E/SP fits industrial sensor-control boards that process several analog channels while retaining compact embedded logic. Its 60 MIPS 16-bit core handles filtering and control algorithms, while 32 KB of Flash and 4 KB of SRAM support application code and working state. The internal op amps and comparators can perform front-end amplification and threshold detection without requiring identical amplifiers on every input. Because the device is offered in an extended automotive temperature grade with a 28-pin SPDIP package, it also suits harsh industrial equipment where through-hole assembly and a wide ambient range are priorities. The final design must verify ADC acquisition timing, op-amp stability, sensor grounding, and protection against industrial transients.
Inirekomenda
Motor and Actuator Control
The PIC24EP32GP202-E/SP is appropriate for compact motor, valve, and actuator controllers that combine real-time decision logic with analog feedback. A 60 MIPS processor can execute commutation, positioning, and fault-handling routines, while the PTG supports deterministic peripheral event sequencing. Comparators can monitor current or position thresholds, and the internal op amps can condition feedback signals before processing. With 32 KB of Flash and 4 KB of RAM, the MCU is suitable for moderate control workloads rather than high-complexity motion algorithms. The 28-pin SPDIP format simplifies prototypes and leaded production assemblies. Firmware and hardware validation must still cover startup behavior, fault states, noise rejection, driver selection, and protection for inductive loads.
Inirekomenda
Automotive Accessory Controller
The PIC24EP32GP202-E/SP can serve as the controller for an automotive accessory or body subsystem that requires deterministic embedded logic and mixed-signal integration. Its 60 MIPS 16-bit core is suitable for coordinating inputs, outputs, diagnostics, and communication functions, while 32 KB of Flash provides room for application code. Internal op amps, comparators, CTMU, and PTG can reduce the component count for signal conditioning, threshold monitoring, and event sequencing. The extended automotive temperature designation makes this ordering code relevant for environments broader than standard commercial conditions. Vehicle designs require separate validation of transient protection, load dump behavior, communication timing, EMC performance, sleep current, and all applicable automotive qualification expectations before production release.
Inirekomenda
Embedded Measurement Instrument
The PIC24EP32GP202-E/SP is useful in compact measurement instruments where analog conditioning and digital calculation must share a single controller. The integrated op amps can amplify low-level sensor outputs, the comparators can establish switching thresholds, and the 60 MIPS core can perform calibration, filtering, linearization, and display-data preparation. Its 4 KB of SRAM supports moderate working sets, while 32 KB of Flash accommodates embedded firmware and constant tables. The through-hole 28-pin SPDIP package is especially convenient for laboratory prototypes, educational platforms, and serviceable assemblies. Measurement accuracy still depends on the selected ADC and analog peripherals, reference quality, grounding, calibration method, and careful isolation of sensitive inputs from digital and switching circuitry.
Inirekomenda
Compact Power-Control Module
The PIC24EP32GP202-E/SP can coordinate a compact power-control module that needs supervisory logic, analog feedback, and precise event handling. At 60 MIPS, the 16-bit processor can manage state machines, protection decisions, fault reporting, and communication tasks while the PTG handles hardware-timed sequences. Internal op amps and comparators help monitor control voltages or currents, and the 32 KB of Flash is adequate for moderate supervisory firmware. The 28-pin SPDIP package allows straightforward prototyping in power-electronics control boards. Its selection should be based on the complete power-conversion topology, switching frequency, sensing method, isolation requirements, thermal environment, and regulatory constraints. The MCU does not replace a dedicated power-stage driver, switching device, or protection network.
Inirekomenda
Education and Rapid Prototyping
The PIC24EP32GP202-E/SP is a practical choice for embedded-control education, evaluation boards, and rapid prototypes because it combines a familiar PIC24E general-purpose architecture with integrated analog peripherals. Students can explore CPU operation, interrupts, timers, ADC acquisition, op amps, comparators, and PTG sequencing without assembling a large collection of separate support chips. The 60 MIPS performance provides headroom for real-time demonstrations, while 32 KB of Flash and 4 KB of SRAM are adequate for several instructional applications. Its 28-pin SPDIP package is straightforward to mount on perforated boards, adapters, sockets, and legacy training platforms. Prototype designers should still use the official pinout and device configuration settings, provide local decoupling, and isolate analog experiments from noisy switching nodes.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC24EP32GP202-E/SP — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC24EP32GP202-I/SP |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP |
| Architecture | 16-bit | 16-bit |
| Maximum Performance | 60 MIPS | 60 MIPS |
| Flash Program Memory | 32 KB (10.7K x 24 words) | 32 KB (10.7K x 24 words) |
| SRAM | 4 KB | 4 KB |
| Temperature Grade | Extended automotive | Industrial |
| Integrated Analog Resources | Op amps, comparators, CTMU, and PTG | Op amps, comparators, CTMU, and PTG |
| Mounting Type | Through-hole | Through-hole |
Pangunahing mga Pagkakaiba
- Extended automotive temperature grade in a through-hole package (kumpara saPIC24EP32GP202-I/SP)
- Integrated analog and event-timing resources (kumpara saPIC24EP32GP202-I/SP)
- Substantial embedded memory for general-purpose control (kumpara saPIC24EP32GP202-I/SP)
Talaan ng Disenyo
Assign the 28 available SPDIP pins by function before laying out the board. Group power and ground connections for the supply requirements stated in the manufacturer datasheet, place decoupling capacitors close to their associated pins, and reserve programming or debug access. Because analog inputs, communications, timers, and digital I/O share the same limited pin count, verify the selected peripheral multiplexing and alternative-function mapping before routing traces.
Keep analog sensor paths short and separated from digital clocks, relay outputs, and switching-node copper. Connect the analog and digital grounds according to the manufacturer’s layout recommendations, and place input filtering close to the signal source when long cables are present. Internal op amps and comparators reduce component count but do not remove the need for stable references, controlled source impedance, and careful return-current management.
Do not substitute the -E/SP and -I/SP ordering codes solely because both use a 28-pin SPDIP. The verified electrical and memory characteristics align, but their temperature grades differ, so the -I/SP option is appropriate only when its industrial-temperature limits cover the complete operating environment. Also verify peripheral multiplexing and pin functions because package-level compatibility does not guarantee identical behavior under every configuration.
Treat the MCU, analog peripherals, sensor inputs, and external loads as separate power-budget domains. Check average and peak current for every enabled peripheral and external load against the device’s documented limits, then size local bulk and high-frequency decoupling accordingly. If an external driver or switching regulator is used, control its switching node and return current so converter noise does not degrade op-amp or comparator behavior.
Impormasyon ng Pagsunod sa Kautusan
The device is identified as extended automotive temperature, but the retrieved technical records do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.