PIC24FJ16GA002-I/SS - 32MHz 16KB Flash Microcontroller | Microchip
MPN: PIC24FJ16GA002-I/SS ✓ NakahandaPIC24FJ16GA002-I/SS Ulas
A microcontroller is a complete programmable control system integrated onto one semiconductor device. The PIC24F family combines a 16-bit RISC core, Flash memory, SRAM, timers, communication peripherals, and general-purpose I/O in a single package. This allows a design to replace several discrete logic and memory components while providing deterministic program execution, interrupt handling, and efficient peripheral integration. PIC24F devices are commonly used where compact embedded intelligence, low power consumption, and a broad peripheral set are required.
Key device attributes include 16 KB of Flash organized as 5.5K by 24 bits, 4096 bytes of SRAM, 21 I/O pins, a 32 MHz system clock, and 16 MIPS performance at 3.3 V. A 17-by-17 hardware multiplier supports efficient single-cycle multiplication operations, while basic Code Guard security provides a hardware mechanism for protecting program code. These characteristics make the PIC24FJ16GA002-I/SS suitable for control loops, lighting management, and compact sensor-driven products.
The PIC24F CPU architecture uses a Harvard-oriented design with separate program and data memory spaces. Flash memory permits in-circuit reprogramming and field firmware updates, and the SRAM area can hold working variables, stack data, and peripheral buffers. The MCU also integrates conventional embedded resources such as timers, serial interfaces, interrupt control, and port multiplexing, allowing firmware to coordinate multiple time-sensitive tasks without adding external logic.
Typical applications include smart LED lighting modules, occupancy and environmental controllers, compact motor-control helpers, programmable logic controllers, industrial sensor nodes, and low-power consumer products. Its 28-pin SSOP footprint is useful where a through-hole package is unnecessary and a surface-mount assembly can reduce board area. The industrial-temperature ordering code supports deployments across a broad range of commercial and industrial ambient conditions.
For new layouts, use the pin-description table and recommended decoupling arrangement in the Microchip datasheet. Confirm the exact oscillator configuration, I/O multiplexing, programming pins, and peripheral assignments before layout release because the 21 I/O pins are shared with internal functions. Verify the maximum peripheral and operating-frequency conditions against the intended supply voltage.
This page consolidates the manufacturer product information, distributor listings, technical feature data, drop-in alternatives, comparison parameters, and practical design guidance for engineers selecting or replacing the PIC24FJ16GA002-I/SS.
Mga alternatibo na pwedeng ilagay na PIC24FJ16GA002-I/SS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24FJ16GA002-I/SS (parehas na form factor at footprint) — pagkakaiba sa Operating Temperature, Package, Core Architecture, Program Memory (Flash), ADC.
PIC24FJ16GA002T-I/SS
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ16GA001-I/SS
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC24FJ16GA004-I/SS
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC24FJ16GA006-I/SS
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC24FJ16GA008-I/SS
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC24FJ16GA002-I/SS Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit Flash Microcontroller |
| Maximum Operating Frequency | 32 MHz |
| Instruction Performance | 16 MIPS at 3.3 V |
| Flash Memory | 16 KB (5.5K x 24 bits) |
| SRAM | 4096 bytes |
| General-Purpose I/O Pins | 21 pins |
| Hardware Multiplier | 17 x 17 bits |
| Architecture | 16-bit PIC RISC core |
| Technology | PIC24F eXtreme low-power technology |
| Volte ng Pagbibigay | 3.3 V |
| Temperature na Operasyon | -40°C to +125°C |
| Packhaging | 28-pin SSOP |
| Uri ng Pagpapasok | Surface Mount |
| Security | Basic Code Guard |
| Process Technology | CMOS |
| Lead-Free Status | Lead free |
| Katayuan ng Lifecycle | In Production |
Gabay sa Pin Configuration ng PIC24FJ16GA002-I/SS 28-pin ssop
Pin configuration para sa PIC24FJ16GA002-I/SS (28-pin ssop package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC24FJ16GA002-I/SS.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC24FJ16GA002-I/SS ay nararapat para sa 6 aplikasyons: Smart LED Lighting Control, Industrial Sensor Node, Occupancy and Environment Controller, Compact Programmable Logic Controller, Battery-Powered Data Logger, Small Motor and Auxiliary Control Module.
Smart LED Lighting Control
The PIC24FJ16GA002-I/SS fits smart lighting modules that require local switching, dimming, and communication logic. Its 32 MHz core provides up to 16 MIPS at 3.3 V, while 21 I/O pins can connect LED drive-control signals, buttons, occupancy sensors, and serial interfaces. The 16 KB Flash stores control tables and firmware, and the 4096-byte RAM supports state machines and communication buffers. Place the MCU near the LED driver control inputs and use the Microchip pin-description table when assigning timer outputs or serial functions.
Inirekomenda
Industrial Sensor Node
The PIC24FJ16GA002-I/SS can serve as the control hub in a compact industrial sensor node that aggregates analog measurements, digital sensor inputs, and periodic communications. The 16-bit RISC core handles filtering and control logic at up to 16 MIPS at 3.3 V, while 4096 bytes of RAM accommodates working state and protocol buffers. Twenty-one GPIO pins support sensors, status indicators, and alarms. For industrial deployment, verify the ordering variant's temperature rating and use the manufacturer recommended decoupling and external oscillator guidance.
Inirekomenda
Occupancy and Environment Controller
The PIC24FJ16GA002-I/SS is appropriate for occupancy, temperature, and lighting controllers that combine low-power sensing with configurable output behavior. Its PIC24F eXtreme low-power architecture supports duty-cycled operation, while the 32 MHz processor can execute debouncing, filtering, and adaptive-control algorithms. The 21 available I/O pins connect passive sensors, switches, and relay or transistor drive stages. Confirm that every selected pin is not committed to programming or oscillator functions and validate the low-power current budget with the final firmware duty cycle.
Inirekomenda
Compact Programmable Logic Controller
The PIC24FJ16GA002-I/SS can implement compact PLC-like sequencing, input scanning, timers, and output control where a full-size programmable controller would be excessive. Sixteen MIPS at 3.3 V provides ample instruction throughput for deterministic state-machine logic, and 16 KB of Flash holds the application program. The 21 GPIO pins can be assigned to field inputs and outputs. Build a small input-protection network, respect per-pin electrical limits, and check the required startup behavior against the Microchip datasheet.
Inirekomenda
Battery-Powered Data Logger
The PIC24FJ16GA002-I/SS is suitable for a battery-powered logger that samples sensors, stores event data, and wakes periodically for radio or serial reporting. The low-power PIC24F architecture reduces active-system energy, while the 4096-byte RAM provides a working buffer for batches of measurements and the 16 KB Flash stores firmware and configuration. Twenty-one I/O pins support sensor selection, wake sources, and status feedback. Validate sleep-mode current, analog-peripheral behavior, and write endurance at the product level rather than relying on nominal processor specifications alone.
Inirekomenda
Small Motor and Auxiliary Control Module
The PIC24FJ16GA002-I/SS can coordinate a small motor, solenoid, or stepped actuator in a compact auxiliary-control module. Its 17-by-17 hardware multiplier supports efficient arithmetic in motion and timing routines, and the 32 MHz core can manage pulse timing, position counting, and fault handling. Twenty-one GPIO pins provide interface capacity for limit switches, encoders, and driver-control signals. Use timer-capable pins for deterministic waveforms and follow the Microchip electrical limits for motor transients and supply currents.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC24FJ16GA002-I/SS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC24FJ16GA002T-I/SS | PIC24FJ16GA001-I/SS | PIC24FJ16GA004-I/SS | PIC24FJ16GA006-I/SS | PIC24FJ16GA008-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Architecture | 16-bit PIC RISC core | 16-bit PIC RISC core | PIC24F 16-bit RISC architecture | PIC24F 16-bit RISC architecture | PIC24F 16-bit RISC architecture | PIC24F 16-bit RISC architecture |
Pangunahing mga Pagkakaiba
- Compact 32 MHz PIC24F control in a 28-pin SSOP (kumpara saPIC24FJ16GA001-I/SS)
- Closest identified ordering alternative retains core resources (kumpara saPIC24FJ16GA002T-I/SS)
- Memory sizing remains transparent for firmware planning (kumpara saPIC24FJ16GA008-I/SS)
- Dedicated hardware multiplier supports time-critical arithmetic (kumpara saPIC24FJ16GA004-I/SS)
Talaan ng Disenyo
Assign the PCB footprint from the 28-pin SSOP drawing in the Microchip datasheet and place decoupling capacitors close to the device's VDD and VSS pins. Route sensitive oscillator and programming-related connections away from fast-switching nodes. The MCU has only 21 general-purpose I/O pins because several package leads serve internal functions, so freeze pin multiplexing against the application firmware before routing the board.
Design the 3.3 V supply to remain within the device's specified operating limits at the maximum 32 MHz clock condition. Use the manufacturer recommended supply ramp and decoupling arrangement rather than relying on general regulator practice alone. If an external oscillator is used, confirm its startup, drive level, and stability requirements in the Microchip documentation. Separate noisy loads from the MCU rail to reduce supply-transient risk.
Do not treat a same-package PIC24FJ16GA member as an automatic substitution. Check Flash size, RAM size, peripheral assignments, pin multiplexing, boot or programming behavior, and the required temperature or automotive qualification. PIC24FJ16GA002T-I/SS is the closest identified ordering alternative, while other family members can differ in memory capacity. Confirm the exact alternate in the manufacturer cross-reference tool before releasing production artwork.
Keep the 32 MHz clock path short and isolated from sensitive analog or sensor inputs, and follow the Microchip guidance for grounding around the oscillator pins. Where the application combines switching power circuitry with sensor inputs, provide a clean return path and place input protection close to the connector. Use the pin-description table to identify oscillator, programming, and reset functions so those leads are not accidentally assigned as ordinary GPIO.
Impormasyon ng Pagsunod sa Kautusan
The product is identified as lead free in distributor product information. RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 statuses were not stated for the exact ordering code.
