PIC24FJ16MC102-E/SS - 16-Bit 32MHz Motor-Control MCU | Microchip
MPN: PIC24FJ16MC102-E/SS ✓ NakahandaPIC24FJ16MC102-E/SS Ulas
A PIC24FJ16MC102 is a 16-bit embedded microcontroller within the PIC24F family. It combines a RISC-inspired processor core, Flash program memory, data RAM, timers, communications interfaces, analog conversion resources, and motor-control peripherals in one device. The -E/SS ordering identifies an extended-temperature 28-pin SSOP configuration, making it suitable for industrial equipment and embedded motor-control products where a small surface-mount package and deterministic peripheral integration are valuable.
The device provides 16 MIPs of execution performance, 16 KB of program Flash, 1 KB of SRAM, and a maximum stated operating frequency of 32 MHz. CTMU supports capacitive measurement, MCPWM peripherals support motor-control signal generation, and PPS provides precise peripheral synchronization. These integrated resources can reduce external circuitry and simplify firmware coordination compared with a microcontroller that requires separate timer, measurement, and synchronization components.
The PIC24FJ16MC102 architecture is aimed at compact control systems rather than high-pin-count applications. Its 28-pin SSOP package provides a practical balance between compact PCB area and access to motor-control, timing, and communication functions. The family description emphasizes low pin count, small-footprint options, and advanced peripherals, while the 16 KB Flash and 1 KB RAM support focused control firmware rather than large data-storage workloads.
Typical uses include small brushless-DC motor controllers, stepper-motor position control, appliance control boards, compact fan and pump controllers, industrial sensor nodes, and embedded power-conversion control. In these systems, MCPWM can generate coordinated motor-drive waveforms, CTMU can support touch or capacitive sensing, and the 16-bit processing core can execute control calculations and manage multiple timing events within a small board footprint.
Designers should treat the 28-pin SSOP footprint and pin multiplexing as the principal PCB constraints. Confirm oscillator, programming, communications, and motor-output assignments in the Microchip pin-description tables before routing the PCB. Decoupling must follow the device-specific power-pin requirements, and exposed motor nodes should be separated from sensitive analog and timing paths to reduce switching-noise coupling.
This product page combines manufacturer-family characteristics, exact ordering information, package constraints, application guidance, and technically relevant drop-in candidates. It also identifies where temperature-grade or package differences must be reviewed before a replacement is approved, helping engineers shorten component-selection and PCB-reuse work without overlooking firmware or hardware implications.
Mga alternatibo na pwedeng ilagay na PIC24FJ16MC102-E/SS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24FJ16MC102-E/SS (parehas na form factor at footprint) — pagkakaiba sa Package, Operating Voltage, ADC, Core Architecture, Maximum CPU Speed.
PIC24FJ16MC102-I/SS
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ16MC102T-I/SS
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ16MC102-I/SO
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ16MC102-E/SS Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 16-bit Flash microcontroller |
| Product Family | PIC24F motor-control family |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPs |
| Program Memory | 16 KB Flash (5.5K x 24 words) |
| Data Memory | 1 KB RAM |
| Architecture | 16-bit |
| Packhaging | 28-pin SSOP |
| Package Width | 5.30 mm |
| Package Lead Span | 0.209 in |
| Motor-Control Peripheral | MCPWM |
| Measurement Peripheral | CTMU |
| Synchronization Peripheral | PPS |
| ADC Resolution | 10-bit |
| ADC Channel Count | 6 channels |
| Timer Configuration | 3 x 16-bit timers and 1 x 32-bit timer |
| Automotive Qualification | AEC-Q100 |
| Operating Voltage | 3.3 V |
Gabay sa Pin Configuration ng PIC24FJ16MC102-E/SS 0.209 in
Pin configuration para sa PIC24FJ16MC102-E/SS (0.209 in package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC24FJ16MC102-E/SS.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC24FJ16MC102-E/SS ay nararapat para sa 6 aplikasyons: Compact Brushless DC Motor Controller, Stepper Motor Position Controller, Appliance and Pump Control Board, Capacitive Sensor and Touch Interface, Industrial Sensor and Actuator Node, Embedded Power Conversion Controller.
Compact Brushless DC Motor Controller
The PIC24FJ16MC102-E/SS fits compact brushless DC motor controllers because its MCPWM peripherals can generate coordinated motor-control waveforms while the 16-bit core executes control calculations at up to 32 MHz and 16 MIPs. Its 16 KB Flash and 1 KB RAM provide dedicated space for startup, commutation, current-control, and fault-handling firmware without requiring a larger controller package. The 28-pin SSOP also helps reduce board area in space-constrained appliances, tools, and cooling equipment. Designers should map each MCPWM output and available ADC channel in the manufacturer pin tables, then verify that the selected external power stage and sensing network match the controller's voltage and timing limits.
Inirekomenda
Stepper Motor Position Controller
The PIC24FJ16MC102-E/SS is suitable for stepper-motor position control because its timers, PPS synchronization, and motor-control peripherals support precisely timed excitation sequences. The 16-bit processing core and 32 MHz operating frequency can manage motion steps, limit logic, and simple closed-loop updates, while 16 KB of Flash accommodates position tables, calibration constants, and control routines. Its 28-pin SSOP package leaves more board area for drivers and connectors in compact laboratory instruments and automated equipment. The design must allocate pins for step/direction commands or PWM outputs, preserve timer accuracy, and separate motor-driver return currents from the MCU ground and analog references.
Inirekomenda
Appliance and Pump Control Board
The PIC24FJ16MC102-E/SS can serve as the control processor in a compact appliance, pump, or fan controller where deterministic timing and motor regulation matter more than large program storage. Its 16-bit core and 16 MIPS throughput can execute motor-startup profiles, speed-control loops, fault detection, and button or sensor handling. CTMU offers a way to add capacitive sensing without a dedicated external controller, while the 28-pin SSOP helps fit the controller into a cost- and space-conscious board. Engineers should keep the MCU and sensing ground away from high-current motor traces, use the manufacturer power and decoupling guidance, and confirm that the extended-temperature option matches the appliance's internal environment.
Inirekomenda
Capacitive Sensor and Touch Interface
The PIC24FJ16MC102-E/SS supports capacitive-touch and sensing designs through its integrated CTMU peripheral, allowing charge timing and measurement functions to be handled within the same control MCU. At up to 32 MHz, the 16-bit processor can combine touch scanning with motor or system-control tasks, while 16 KB of Flash and 1 KB of RAM support calibration tables, debounce logic, and communication handling. The 28-pin SSOP is useful in compact controls where a separate capacitive-measurement IC would increase footprint. For reliable implementation, use the manufacturer CTMU application guidance, provide clean sensor grounding and shielding, and validate the timing and current limits under the target electrode geometry and moisture conditions.
Inirekomenda
Industrial Sensor and Actuator Node
The PIC24FJ16MC102-E/SS is appropriate for small industrial sensor-and-actuator nodes that need local control without a high-end processor. Its 16-bit architecture and 32 MHz maximum frequency support signal processing and timing tasks, while MCPWM can control a small motor or actuator and the 10-bit ADC supports sensor acquisition. The extended-temperature ordering can support equipment with wider internal temperature variation, subject to the exact rating. With 1 KB of RAM and 16 KB of Flash, the device is best suited to focused data paths rather than large local buffering. Design the communications pins, ADC references, and actuator outputs according to the pin table, and isolate field-side wiring to protect the low-voltage controller.
Inirekomenda
Embedded Power Conversion Controller
The PIC24FJ16MC102-E/SS can supervise compact power-conversion systems that require sequencing, periodic sampling, and fast control-loop execution. The 16-bit core at up to 32 MHz is suitable for managing state machines and sampled feedback, while MCPWM can support synchronized switching-control outputs and PPS can improve timing relationships between peripherals. The 28-pin SSOP conserves board area in power modules where the control section must coexist with magnetics, switches, and sensing components. The MCU is not a substitute for power-stage devices, so external switches must be rated separately. Layout should minimize switching-node coupling, maintain a quiet analog reference path, and use the manufacturer guidance for decoupling and exposed pad or package-specific requirements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC24FJ16MC102-E/SS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC24FJ16MC102-I/SS | PIC24FJ16MC102T-I/SS | PIC24FJ16MC102-I/SO |
|---|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPs | 16 MIPs | 16 MIPs | 16 MIPs |
| Program Memory | 16 KB Flash | 16 KB Flash | 16 KB Flash | 16 KB Flash |
| Data Memory | 1 KB RAM | 1 KB RAM | 1 KB RAM | 1 KB RAM |
| Motor-Control Peripheral | MCPWM | MCPWM | MCPWM | MCPWM |
| ADC | 6-channel, 10-bit | 6-channel, 10-bit | 6-channel, 10-bit | 6-channel, 10-bit |
| Temperature Ordering Code | -E | -I | -T-I | -I |
Pangunahing mga Pagkakaiba
- Combines motor-control peripherals with a compact 28-pin SSOP footprint (kumpara saPIC24FJ16MC102-I/SS)
- Extended-temperature ordering supports wider internal environments (kumpara saPIC24FJ16MC102-I/SS)
- 16 MIPS execution supports compact real-time control without a larger package (kumpara saPIC24FJ16MC102-I/SO)
Talaan ng Disenyo
Complete the pin multiplexing review before routing the 28-pin SSOP layout. Assign VDD and VSS, programming signals, oscillator components, communications, ADC inputs, timer outputs, and MCPWM functions directly from the Microchip pin-description tables. Place the required decoupling capacitors adjacent to their associated pins, and verify that the selected package land pattern matches the manufacturer's SSOP recommendations.
Keep motor-drive and switching-node copper away from the MCU analog input, oscillator, CTMU-sensing, and PPS traces. Route high-current motor returns so they do not share sensitive signal paths, and use a deliberate ground strategy that limits motor-current voltage drops beneath the MCU. This separation is especially important because the 10-bit ADC can be used to sample motor feedback while the same board carries fast PWM edges.
Do not treat all PIC24FJ16MC102 package suffixes as interchangeable. The -SS order code specifies the 28-pin SSOP shipping configuration, while temperature and qualification codes can change the acceptable environment. Confirm the complete ordering suffix, tube or tape-and-reel requirement, temperature range, and programming configuration before releasing a purchase order or approving a substitution.
Use the manufacturer oscillator and timing guidance for the device's clock source, and reserve PPS-capable pins for functions where deterministic synchronization is valuable. Avoid routing clock-sensitive or capture-sensitive signals beside high-di/dt motor outputs. Where the timing margin is tight, validate the complete PCB with an oscilloscope because package transitions, connector wiring, and external driver currents can disturb the timing observed by the 10-bit ADC and timer inputs.
Impormasyon ng Pagsunod sa Kautusan
The exact -E/SS product listing identifies the device as automotive and AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited manufacturer or distributor records.