PIC32MK0512GPK064-E/PT - 120MHz 512KB MCU with USB FS | Microchip
MPN: PIC32MK0512GPK064-E/PT ✓ NakahandaPIC32MK0512GPK064-E/PT Ulas
A 32-bit microcontroller (MCU) is a microprocessor core combined with on-chip memory, peripherals, and interfaces on a single die. The PIC32MK family uses the MIPS32 microAptiv core, which sits within the broader hierarchy of 32-bit microcontrollers -> embedded microcontrollers -> microprocessors -> integrated circuits. It is also closely related to the PIC microcontroller family and shares the PIC instruction set architecture, giving engineers access to the MPLAB X IDE, MPLAB Harmony framework, and the vast PIC library ecosystem. 32-bit MCUs are widely used where 8-bit and 16-bit parts run out of CPU headroom, headroom that microAptiv provides through 120 MHz core clock, hardware multiply/divide, and 64 KB SRAM-backed data path.
Key features of the PIC32MK0512GPK064-E/PT include the 120 MHz core, 512 KB Flash with ECC, 64 KB SRAM (typical for the family), a 12-bit ADC with multiple conversion channels, USB Full-Speed device/host/OTG capability, multiple UART/SPI/I2C peripherals, and motor-control PWM modules. ECC on the Flash improves reliability in noisy industrial environments, while the integrated USB FS eliminates the need for a standalone transceiver, reducing BOM cost and PCB area. The TQFP-64 (10x10 mm) package provides 49 general-purpose I/O pins that remain after dedicated peripheral assignments, giving plenty of routing freedom for mixed-signal designs.
Typical applications include BLDC/PMSM motor control drives, industrial PLC modules, IIoT edge nodes, factory automation controllers, multi-channel sensor hubs, and USB peripherals. The combination of 120 MHz performance, ECC Flash, and motor-control PWM makes this part a strong fit for cost-sensitive industrial designs that must survive the -40C to +125C range.
Designers should note that the -E variant supports -40C to +125C, while the -I variant supports -40C to +85C for commercial/industrial settings. Choose the E grade for harsh-environment industrial deployment. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MK family, and practical design notes that go beyond the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na PIC32MK0512GPK064-E/PT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC32MK0512GPK064-E/PT (parehas na form factor at footprint) — pagkakaiba sa ADC, Package, Operating Temperature, Core Architecture, USB.
PIC32MK0512GPK064-I/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MK0512GPE064T-E/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MK0512GPG064-E/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MK0256GPG064-E/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MK0512GPD064-E/MR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MK0512GPK064-E/PT Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | MIPS32 microAptiv |
| Core Size | 32-bit, single core |
| Maximum CPU Clock | 120 MHz |
| Program Memory (Flash) | 512 KB (512K x 8) |
| Flash ECC | Yes (ECC-protected) |
| RAM (typical family) | 64 KB |
| Volte ng Pagbibigay | 2.5 V / 3.3 V |
| Temperature na Operasyon | -40C to +125C (extended, -E suffix) |
| USB | USB Full-Speed (USB FS) device/host/OTG, 1x port |
| ADC | 12-bit, multi-channel |
| CAN-FD | Not present (NO CAN-FD, General Purpose Version) |
| Packhaging | TQFP-64 (10x10 mm), /PT suffix |
| Uri ng Pagpapasok | Surface Mount |
| Number of I/O | 49 |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng PIC32MK0512GPK064-E/PT tqfp-64 (10x10 mm), /pt suffix
Pin configuration para sa PIC32MK0512GPK064-E/PT (tqfp-64 (10x10 mm), /pt suffix package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC32MK0512GPK064-E/PT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC32MK0512GPK064-E/PT ay nararapat para sa 6 aplikasyons: BLDC and PMSM Motor Control, Industrial Control and PLC Modules, Industrial IoT (IIoT) Edge Nodes, USB Peripherals and HID Devices, Multi-Channel Sensor Hubs, Automotive Body and Comfort Modules.
BLDC and PMSM Motor Control
The PIC32MK0512GPK064-E/PT fits BLDC/PMSM motor control because the 120 MHz MIPS32 microAptiv core delivers the deterministic compute needed for field-oriented control (FOC) loops, and the integrated motor-control PWM modules generate complementary 3-phase switching signals with hardware dead-band insertion. The 12-bit ADC with multi-channel conversion enables simultaneous current sensing on all three phases within a single PWM period, while the 512 KB ECC Flash stores FOC parameter tables and sensor calibration data reliably in noisy power-electronics environments. According to the Microchip PIC32MK family datasheet, the on-chip PWM supports center-aligned and edge-aligned modes with fault-input shutdown. Designers place the MCU between the gate-driver stage and the position sensor (Hall or encoder), running torque and speed loops at 10-20 kHz. The -40C to +125C rating covers under-hood and industrial-cabinet temperatures.
Inirekomenda
Industrial Control and PLC Modules
The PIC32MK0512GPK064-E/PT is well suited for industrial PLC I/O modules and process controllers thanks to its 120 MHz MIPS32 microAptiv core, 512 KB ECC Flash, and 49 general-purpose I/O pins available after peripheral allocation. The 12-bit ADC supports 4-20 mA analog input cards, and the multiple UART/SPI/I2C peripherals handle Modbus RTU, Modbus TCP-over-Ethernet, and digital sensor I/O without external bridges. ECC-protected Flash detects and corrects single-bit errors common in electrically noisy industrial cabinets. Per the Microchip family datasheet, the -40C to +125C extended grade satisfies IEC 60068 industrial temperature profiles. The TQFP-64 (10x10 mm) footprint allows hand-repairable through-hole-style PCB assembly for field-serviceable modules. Use the MCU as the central controller between digital input optocouplers and analog output DACs on a PLC daughter board.
Inirekomenda
Industrial IoT (IIoT) Edge Nodes
The PIC32MK0512GPK064-E/PT is a strong fit for IIoT edge gateways and sensor hubs because of its integrated USB Full-Speed transceiver and rich serial peripheral set. The 120 MHz core runs MQTT/TLS-like stacks on Microchip's MPLAB Harmony framework, while the 512 KB ECC Flash stores device certificates and OTA-update staging areas. The on-chip USB FS port enables direct USB-host or USB-device connectivity without external transceiver cost, easing enclosure design. Per the Microchip family datasheet, the -40C to +125C rating supports outdoor and factory-floor deployment. Designers can pair the MCU with a Wi-Fi or LoRa module over UART/SPI to publish sensor data to cloud platforms. The 64-pin TQFP footprint gives enough GPIO for status LEDs, user buttons, and multiple sensor I/O buses.
Inirekomenda
USB Peripherals and HID Devices
The PIC32MK0512GPK064-E/PT fits USB peripherals such as HID controllers, USB-to-UART bridges, and USB data-acquisition devices thanks to its integrated USB Full-Speed transceiver compliant with USB 2.0 FS. The 120 MHz core handles USB enumeration, HID report generation, and bulk-transfer buffering concurrently with application logic, while the 512 KB ECC Flash stores USB descriptors and OEM-specific VID/PID tables. According to the Microchip family datasheet, the on-chip USB module includes an internal pull-up resistor and full OTG role swap support. Place the MCU between the USB connector and the controlled peripheral (e.g., sensor array or actuator), using the 12-bit ADC for analog sampling and UART/SPI for firmware debug logging. The -40C to +125C grade supports outdoor or industrial USB appliances.
Inirekomenda
Multi-Channel Sensor Hubs
The PIC32MK0512GPK064-E/PT serves as a multi-channel sensor hub front-end for industrial monitoring because the 12-bit ADC can scan multiple analog sensors per PWM cycle and the 49 GPIO pins accept parallel digital sensors. The 120 MHz MIPS32 microAptiv core runs sensor fusion algorithms (Kalman, complementary filters) in real time, while the 512 KB ECC Flash stores calibration coefficients and per-channel compensation tables. Per the Microchip family datasheet, the multiple I2C/SPI peripherals let the MCU simultaneously interface to accelerometers, pressure sensors, and temperature sensors without external muxes. Place the MCU between sensor arrays and a backhaul interface (UART to a wireless module or USB to a host PC). The -40C to +125C rating supports harsh-environment installations.
Inirekomenda
Automotive Body and Comfort Modules
The PIC32MK0512GPK064-E/PT -E extended grade targets automotive body controllers, HVAC panels, and comfort modules where its 120 MHz core, 512 KB ECC Flash, and 12-bit ADC meet LIN-bus body-electronics requirements. The ECC Flash detects single-bit errors in the high-temperature under-dash environment, and the -40C to +125C rating covers AEC-Q100 thermal profiles when paired with proper PCB design. The integrated USB FS port simplifies diagnostic interfaces and firmware update paths. According to the Microchip family datasheet, the motor-control PWM channels drive small DC motors for HVAC flaps and mirror adjustment. Use the MCU between LIN transceivers (e.g., MCP2003B) and the body-control actuator bus. Note that AEC-Q100 qualification requires the -Q automotive suffix; the -E industrial grade is functionally equivalent for non-safety automotive body modules.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC32MK0512GPK064-E/PT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC32MK0512GPK064-I/PT | PIC32MK0512GPE064T-E/PT | PIC32MK0512GPG064-E/PT | PIC32MK0256GPG064-E/PT | PIC32MK0512GPD064-E/MR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same |
| Core | MIPS32 microAptiv 32-bit, 120 MHz | MIPS32 microAptiv 32-bit, 120 MHz | MIPS32 microAptiv 32-bit, 120 MHz | MIPS32 microAptiv 32-bit, 120 MHz | MIPS32 microAptiv 32-bit, 120 MHz | MIPS32 microAptiv 32-bit, 120 MHz |
| Flash Memory | 512 KB (ECC) | 512 KB (ECC) | 512 KB (ECC) | 512 KB | 256 KB (-50%) | 512 KB |
| USB | USB FS (1x port) | USB FS (1x port) | USB FS (1x port) | USB FS (1x port) | USB FS (1x port) | USB FS (1x port) |
| CAN-FD | No (General Purpose Version) | No | No | No | No | No |
| ADC | 12-bit multi-channel | 12-bit multi-channel | 12-bit multi-channel | 12-bit multi-channel | 12-bit multi-channel | 12-bit multi-channel |
| Operating Temperature | -40C to +125C (extended) | -40C to +85C (industrial) | -40C to +125C (extended) | -40C to +125C (extended) | -40C to +125C (extended) | -40C to +125C (extended) |
Pangunahing mga Pagkakaiba
- Extended -40C to +125C temperature grade on the same TQFP-64 die as the -I variant (kumpara saPIC32MK0512GPK064-I/PT)
- 512 KB ECC Flash for reliability in electrically noisy industrial environments (kumpara saPIC32MK0256GPG064-E/PT)
- USB Full-Speed with on-chip transceiver eliminates external USB PHY (kumpara saPIC32MK0512GPD064-E/MR)
Talaan ng Disenyo
The PIC32MK0512GPK064-E/PT operates from 2.5V/3.3V with an on-chip LDO regulator and integrated 120 MHz PLL. Per the Microchip datasheet, decouple VDD/VBAT with a 100 nF ceramic + 4.7 uF bulk capacitor placed within 5 mm of the package pins; add a ferrite bead between the analog AVDD and digital VDD rails if analog performance is sensitive. The USB FS transceiver requires a dedicated 3.3V supply - do not share it with noisy switching regulators without adequate filtering.
At 120 MHz CPU clock with full peripheral activity, the TQFP-64 (10x10 mm) package dissipates approximately 200-300 mW typical, well within the thermal envelope for industrial designs. According to Microchip thermal data, the theta_JA of TQFP-64 is around 50-55 C/W on a standard 4-layer JEDEC PCB, giving a junction temperature rise of 15-20 C above ambient at typical load. The -40C to +125C grade covers most industrial enclosures without active heatsinking, but derate by 10% in enclosed metal housings with no airflow.
Place the 12-bit ADC reference decoupling (0.1 uF + 1 uF) within 3 mm of the AVSS/AVDD pins, and route analog signals away from the 120 MHz CPU clock traces and PWM outputs. The USB FS D+/D- traces must be 90 ohm differential with matched length and routed over a continuous ground plane per USB 2.0 FS specification. Per Microchip layout guidelines, keep the crystal oscillator traces short and surround them with a ground pour to minimize EMI.
Do not confuse the PIC32MK0512GPK064 (GPK, General Purpose Version, no CAN-FD) with the PIC32MK0512MCMxxx (with CAN-FD) - both share the family name but have different peripheral sets. Verify the full MPN against the family datasheet before substitution. The /PT suffix denotes TQFP-64; the /MR suffix denotes QFN-64 - these are NOT drop-in compatible despite sharing the 64-pin count. Always check the pinout diagram before PCB layout.
Impormasyon ng Pagsunod sa Kautusan
RoHS and lead-free compliant per Microchip product page. Not AEC-Q100 qualified; the -E grade covers -40C to +125C industrial temperature but is not formally automotive-qualified. For AEC-Q100 automotive applications, choose the PIC32MKxxxxxxx-Q automotive suffix variant.
