PIC32MX664F128LT-V/PT - 80MHz 128KB Flash USB MCU | Microchip
MPN: PIC32MX664F128LT-V/PT ✓ NakahandaPIC32MX664F128LT-V/PT Ulas
A 32-bit microcontroller (MCU) is a single-chip computer core based on a 32-bit data path, registers, and address space, integrating CPU, memory, peripherals and A/D - converters on one die. The PIC32MX series uses the MIPS M4K core, a Harvard-architecture processor widely deployed in embedded connectivity applications. Within Microchip's MCU taxonomy this MCU belongs to: 32-bit MCU -> MIPS32 -> PIC32 -> PIC32MX6xx family -> USB/Ethernet connectivity class.
Key features include 128 KB Flash program memory organized as 128K x 8, 32 KB SRAM, USB OTG full-speed (12 Mbps) with on-chip transceiver, 10/100 Mbps Ethernet MAC, sixteen 10-bit ADC channels with 1 Msps conversion rate, five 16-bit timers plus five input-capture and five output-compare modules, two I2C and two SPI/I2S ports, and two UART modules. The device operates from 2.3V to 3.6V with 5V-tolerant digital I/O and supports MPLAB Harmony, MPLAB X IDE, and XC32 toolchains.
Typical applications include USB peripherals and HID devices, Ethernet-connected embedded controllers, industrial automation nodes with USB device/host capability, point-of-sale terminals, and consumer audio/visual docks. Design considerations should include the mandatory 12 MHz primary oscillator for USB operation, layout separation of analog and digital grounds, and decoupling of the 3.3V rail close to all VDD/VSS pairs. This page synthesizes distributor pricing, drop-in same-package alternatives, and application notes not found in the standalone datasheet.
Mga alternatibo na pwedeng ilagay na PIC32MX664F128LT-V/PT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC32MX664F128LT-V/PT (parehas na form factor at footprint) — pagkakaiba sa USB, Package, ADC, Ethernet, Operating Temperature.
PIC32MX664F128L-I/PT
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC32MX664F128LT-V/PF
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC32MX564F128L-V/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MX664F064L-V/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MX575F512L-80V/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC32MX664F128LT-V/PT Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | MIPS32 M4K (PIC32MX) |
| Core Size | 32-Bit |
| Maximum Clock Speed | 80 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM Size | 32 KB |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| Hanay ng Temperature na Operasyon | -40C to +105C (extended, -V suffix) |
| ADC | 10-bit, 16 channels, 1 Msps |
| USB | USB OTG Full-Speed (12 Mbps) with on-chip transceiver |
| Ethernet | 10/100 Mbps MAC |
| Packhaging | 100-pin TQFP (PT) 12x12 mm |
| Uri ng Pagpapasok | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng PIC32MX664F128LT-V/PT 100-pin tqfp (pt) 12x12 mm
Pin configuration para sa PIC32MX664F128LT-V/PT (100-pin tqfp (pt) 12x12 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC32MX664F128LT-V/PT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC32MX664F128LT-V/PT ay nararapat para sa 6 aplikasyons: USB HID Peripheral Devices, Industrial Ethernet Sensor Nodes, USB CDC Virtual COM Port Devices, Point-of-Sale (POS) Terminals, Audio/Visual Docking Stations, Home Automation IoT Gateways.
USB HID Peripheral Devices
The PIC32MX664F128LT-V/PT's USB OTG Full-Speed controller with on-chip transceiver makes it ideal for USB Human Interface Devices (HID) such as keyboards, mice, game controllers, and custom input peripherals. With 128 KB Flash and 32 KB SRAM, the MCU can host the full USB HID class driver plus application code and descriptor tables without external memory. Its 80 MHz MIPS M4K core handles USB polling at 1 kHz with substantial margin for application logic. The on-chip 3.3V regulator simplifies bus-powered designs, although designers must still provide 5V VBUS handling for host/OTG modes.
Inirekomenda
Industrial Ethernet Sensor Nodes
The integrated 10/100 Ethernet MAC combined with 32 KB RAM and 128 KB Flash makes this PIC32MX a strong fit for industrial sensor nodes using Modbus TCP, EtherNet/IP, or MQTT-over-TCP. Designers typically pair the MCU with a LAN8720A RMII PHY, providing a complete Ethernet interface on a 2-layer board. The -40C to +105C extended temperature grade supports outdoor enclosures, factory floors, and unheated cabinets. The MCU's 16-channel 10-bit ADC at 1 Msps handles multi-sensor scanning faster than the polling interval of typical industrial control systems.
Inirekomenda
USB CDC Virtual COM Port Devices
USB Communication Device Class (CDC) firmware running on the PIC32MX664F128LT-V/PT presents a virtual COM port to the host PC, eliminating the need for legacy RS-232 drivers in test equipment, data loggers, and configuration tools. The USB OTG Full-Speed controller with on-chip transceiver provides 12 Mbps bandwidth, and the 32 KB SRAM comfortably handles multi-packet USB buffers plus UART-side buffering. Designers can use the MPLAB Harmony USB CDC stack to generate enumeration, line coding, and control transfer handlers with minimal hand-coding.
Inirekomenda
Point-of-Sale (POS) Terminals
POS terminals benefit from the PIC32MX664F128LT-V/PT's combination of USB device, USB host (for barcode scanners and printers), and Ethernet MAC for back-office connectivity. The 128 KB Flash hosts USB Host stack, USB Device stack, TCP/IP stack, and application logic simultaneously. The MCU drives a character LCD or small TFT through PMP or SPI, while the 16 ADC channels read keypad or battery monitoring signals. The extended -V temperature grade supports enclosed POS environments without active cooling.
Inirekomenda
Audio/Visual Docking Stations
The PIC32MX664F128LT-V/PT drives USB audio class (USB Audio 1.0) speakers, headphones, and docking stations with on-chip I2S peripherals and S/PDIF receive. Its 80 MHz core and DMA controllers move audio samples with low CPU overhead, and the 32 KB SRAM buffers several milliseconds of USB isochronous data without dropouts. Ethernet and USB host capability enables AVB-like control planes for docking stations that integrate charging, audio, and LAN connectivity in one product.
Inirekomenda
Home Automation IoT Gateways
Home automation IoT gateways use the PIC32MX664F128LT-V/PT to bridge Zigbee/Z-Wave/Wi-Fi subnets to Ethernet, USB storage, and cloud APIs. Ethernet MAC provides the wired backbone; USB OTG host mode backs up configuration to flash drives; the ADC reads analog sensors. The MPLAB Harmony TCP/IP stack includes MQTT, HTTP, and SNTP clients ready for cloud integration, and the 128 KB Flash accommodates TLS clients with reduced cipher suites. Industrial -V temp grade handles attic and basement installations.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC32MX664F128LT-V/PT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC32MX664F128L-I/PT | PIC32MX664F128LT-V/PF | PIC32MX564F128L-V/PT | PIC32MX664F064L-V/PT | PIC32MX575F512L-80V/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PF) 14x14 mm | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) |
| Core | MIPS32 M4K 80 MHz | MIPS32 M4K 80 MHz | MIPS32 M4K 80 MHz | MIPS32 M4K 80 MHz | MIPS32 M4K 80 MHz | MIPS32 M4K 80 MHz |
| Flash | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB | 512 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB |
| USB OTG | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | No | Yes (Full-Speed) | No |
| Ethernet MAC | Yes (10/100) | Yes (10/100) | Yes (10/100) | No | Yes (10/100) | No |
| Temperature Grade | -40C to +105C (extended) | -40C to +85C (industrial) | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) |
Pangunahing mga Pagkakaiba
- Combines USB OTG Full-Speed + 10/100 Ethernet MAC in one die (kumpara saPIC32MX564F128L-V/PT)
- Extended temperature grade to +105C with the -V suffix (kumpara saPIC32MX664F128L-I/PT)
- Same 100-pin TQFP (12x12 mm) footprint across the 6xx family (kumpara saPIC32MX664F128H-V/MR)
Talaan ng Disenyo
PIC32MX664F128LT-V/PT operates from 2.3V to 3.6V with a typical 3.3V rail. Place a 10 uF bulk tantalum or ceramic capacitor on each VDD/VDDIO pair, plus a 0.1 uF ceramic decoupling cap within 5 mm of every VDD/VSS pin pair. The on-chip LDO (when enabled) provides core voltage but still requires decoupling on VDDIN. Estimated power loss at 80 MHz, all peripherals active, is approximately 60 mA; budget 100 mA worst-case for the 3.3V regulator.
USB operation on PIC32MX664F128LT-V/PT requires a 12 MHz primary crystal oscillator (POSC), not the 8 MHz internal Fast RC. The USB module derives 48 MHz from the PLL using POSC as reference. Using FRC for USB will fail USB-IF compliance and produce timing-violated packets. Also enable the on-chip USB transceiver physically connected to D+/D- lines with 15 kohm pull-down on D- (for full-speed) or D+ depending on speed, and never let VBUS float in device mode.
For Ethernet PHY connection (e.g., LAN8720A RMII), keep the 50 MHz RMII clock trace under 25 mm and matched within 2 mm between clock and data traces. Place the PHY close to the MCU, with separate analog and digital ground planes joined at one point under the PHY. Route the Ethernet differential pairs (when using MII with integrated PHY magnetics) with 100 ohm differential impedance and isolation from switching power and USB data lines.
Estimated: at 80 MHz with all peripherals active, the 100-pin TQFP (PT) package dissipates approximately 0.18 W; the resulting junction temperature rise is roughly 18 C above ambient using the standard 32.5 C/W theta_JA. No heatsink or copper pour is required for typical applications, but for enclosed or high-temperature installations (-V part rated to +105C), add at least 1 square inch of copper ground pour under the exposed pad region.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose AEC-Q100 PIC variants for automotive. Reach and conflict minerals statements available on Microchip.com/corporate/quality.