R5F109GAKFB#X0 - 16-Bit Low-Power MCU | Renesas Electronics
MPN: R5F109GAKFB#X0 ✓ NakahandaR5F109GAKFB#X0 Ulas
An automotive microcontroller is a specialized semiconductor that combines a processor core, nonvolatile program memory, data memory, communication peripherals, timers, analog conversion functions, and safety mechanisms on one device. Within the embedded-control hierarchy, the R5F109GAKFB#X0 belongs to the Renesas RL78 family of 16-bit flash microcontrollers and is designed for applications where low current consumption and functional integrity are more important than high computational throughput.
The RL78/F12 family provides several features intended for automotive functional-safety implementations. These include flash-memory CRC calculation, illegal-memory-access detection, RAM guarding, analog-to-digital converter testing, and special-function-register protection. The integrated LIN module supports communication between automotive nodes, while the family’s broad flash and pin ranges allow designers to standardize software and peripheral architecture across different control modules.
The R5F109 architecture emphasizes efficient embedded control through a compact 16-bit design and low-consumption operation. Compared with a general-purpose processor, this device concentrates resources on embedded peripherals, deterministic control, and automotive support functions. That division of responsibility makes it practical to monitor switches, sensors, actuators, and communication interfaces without using a larger application processor.
Typical applications include body-control modules, door and window controllers, climate-control subsystems, motor-control interfaces, automotive switch inputs, sensor-conditioning nodes, and LIN-connected peripheral controllers. A LIN network is particularly useful for distributed vehicle systems in which inexpensive nodes communicate with a central controller over a single automotive serial bus.
PCB implementation requires attention to decoupling, grounding, signal integrity, and programming access. Place the input and output capacitors close to their designated pins, maintain a continuous ground reference beneath the device, and route high-current or noisy automotive signals away from sensitive analog and clock traces. Confirm the exact pin assignment and alternate-function restrictions in the manufacturer pin table before finalizing the PCB.
This product page combines family-level capabilities, package information, drop-in candidate evaluation, sourcing guidance, and design-focused engineering guidance. It also distinguishes what engineers must confirm in the device documentation before layout or firmware release, helping teams move from part selection to a safer, more predictable automotive embedded-control design.
Mga alternatibo na pwedeng ilagay na R5F109GAKFB#X0 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok R5F109GAKFB#X0 (parehas na form factor at footprint) — pagkakaiba sa A/D Converter Testing, CPU Architecture, Flash CRC Calculation, Illegal Memory Access Detection, Package.
R5F109GAKFB-X0
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F109GAKFB#X0G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F109GAJFB
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F109GAKFB#X0 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit automotive flash microcontroller |
| Product Family | Renesas RL78/F12 |
| CPU Architecture | 16-bit RL78 |
| Flash Memory | 16 KB for the specified device configuration |
| Automotive Interface | Integrated LIN module |
| Flash CRC Calculation | Supported |
| Illegal Memory Access Detection | Supported |
| RAM Guard | Supported |
| A/D Converter Testing | Supported |
| Special Function Register Protection | Supported |
| Packhaging | 32-pin LQFP |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Unknown |
Gabay sa Pin Configuration ng R5F109GAKFB#X0 32-pin lqfp
Pin configuration para sa R5F109GAKFB#X0 (32-pin lqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa R5F109GAKFB#X0.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
R5F109GAKFB#X0 ay nararapat para sa 6 aplikasyons: Automotive Body-Control Module, LIN-Connected Door Control Node, Climate-Control Panel Interface, Motor and Actuator Control Node, Automotive Switch-Input Module, Battery-Powered Sensor Node.
Automotive Body-Control Module
The R5F109GAKFB#X0 fits distributed body-control tasks that require low-power operation, digital input monitoring, and vehicle-network communication. Its 16 KB flash provides embedded program storage for debouncing, diagnostics, state logic, and LIN protocol handling, while the RL78/F12 family’s safety hardware supports flash CRC calculation, RAM guarding, and illegal-memory-access detection. Placing the device in a 32-pin LQFP also reduces board-space requirements compared with larger automotive MCU packages. The main design trade-off is the device’s modest 16 KB flash capacity, which requires disciplined code sizing and careful partitioning of diagnostic functions.
Inirekomenda
LIN-Connected Door Control Node
The R5F109GAKFB#X0 is appropriate for a remote door or window node that senses switches and controls a small motor through a LIN network. The integrated LIN module avoids a separate communication controller, while the 16-bit control architecture supports responsive debouncing, pulse-width modulation, and diagnostic state handling. Low consumption is valuable because vehicle nodes may remain connected to the battery for long periods, although the designer must define wake-up behavior and validate the inactive-state budget for every operating condition. The 32-pin LQFP provides enough external connectivity for switch inputs, motor drive, diagnostics, and communication while keeping the controller compact.
Inirekomenda
Climate-Control Panel Interface
The R5F109GAKFB#X0 can serve as the local controller for climate-control buttons, encoder inputs, status lamps, and a LIN-connected actuator. Its 16 KB flash accommodates event handling, debounce logic, diagnostics, and communication routines, while the family’s low-consumption design is useful in vehicle cabins where controllers must operate for extended periods. Safety-oriented hardware such as RAM guarding and special-function-register protection can improve diagnostic coverage for control paths. Because the exact peripheral inventory and electrical limits must match the panel architecture, the design should confirm ADC, timer, and I/O assignments in the manufacturer pin and peripheral tables before schematic release.
Inirekomenda
Motor and Actuator Control Node
The R5F109GAKFB#X0 is suitable for simple automotive actuator nodes where a microcontroller must interpret sensor inputs, time motor or solenoid events, and report status over LIN. The RL78/F12 platform provides an efficient 16-bit control core, 16 KB of flash, and hardware mechanisms intended to support functional-safety development. That combination favors deterministic peripheral-driven control without the resource cost of a general-purpose processor. The main engineering limitation is flash capacity, so timing tables, diagnostics, and application logic must be sized together. Final motor-drive circuitry should use separate protection and drive components where required rather than placing excessive switching stress on the controller.
Inirekomenda
Automotive Switch-Input Module
The R5F109GAKFB#X0 fits centralized switch-input modules that debounce multiple contacts, monitor changes, and transmit a filtered state over the vehicle network. The integrated LIN interface supports communication with a central controller, and low consumption helps manage standby demand. The family’s flash CRC, illegal-access detection, RAM guard, and SFR-protection functions are particularly relevant when input handling contributes to a safety-related control path. A hardware design should include appropriate input conditioning, pull components, and protection against the vehicle’s electrical transients; firmware should then validate debounce timing and diagnostic thresholds against the vehicle interface specification.
Inirekomenda
Battery-Powered Sensor Node
The R5F109GAKFB#X0 can support a low-duty-cycle sensor node that wakes to sample an input, evaluates the result, communicates over LIN, and returns to a low-consumption state. Its 16-bit control platform is appropriate for deterministic sensor management, filtering, threshold checks, and diagnostic reporting, while the integrated LIN interface avoids adding a separate network transceiver controller to the MCU package. The 32-pin LQFP supplies a practical balance of I/O capacity and board area for compact modules. Power-budget calculations should include MCU sleep current, external sensor current, pull-up dissipation, and wake-operation duration rather than relying only on the processor’s headline consumption figures.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for R5F109GAKFB#X0 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | R5F109GAKFB-X0 | R5F109GAKFB#X0G | R5F109GAJFB |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 32-pin LQFP | 32-pin LQFP | 32-pin LQFP | 32-pin LQFP |
| Product Family | Renesas RL78/F12 | Renesas RL78/F12 | Renesas RL78/F12 | Renesas R5F109 |
Pangunahing mga Pagkakaiba
- Direct ordering-form compatibility (kumpara saR5F109GAKFB-X0)
- Automotive communication integration (kumpara saR5F109GAJFB)
- Functional-safety support in the same MCU (kumpara saR5F109GAKFB#X0G)
Talaan ng Disenyo
Place every required supply-decoupling capacitor directly between the corresponding power and ground pins, with the shortest possible ground return. The 32-pin LQFP needs a continuous ground reference and carefully controlled thermal-relief geometry beneath the package. Route the reset and programming interfaces away from switching nodes, and maintain the clearances required by the automotive transient-protection network so that high-energy external signals do not couple into sensitive control circuitry.
Assign LIN, analog, and digital interfaces by following the manufacturer pin table rather than relying on package position alone. Keep the LIN-capable path compact and return its reference ground directly to the appropriate power-entry point. If the device monitors analog switch inputs, isolate resistive networks and protection devices from clock and programming traces. After placement, verify that exposed leads, solder mask, and courtyard dimensions remain compatible with the selected automotive production PCB process.
Estimated: if the MCU rail is 3.3 V and the average MCU current is 1 mA, the controller consumes approximately 3.3 mW during that operating state; actual vehicle-node consumption also includes external sensors, pull resistors, and the LIN interface. Calculate the complete sleep, wake, and active-state budget rather than isolating MCU current. If battery savings are critical, measure the assembled node across temperature and supply tolerance because external leakage can dominate a low-current design.
Do not select a replacement from the device name alone. R5F109GAKFB-X0 and R5F109GAKFB#X0 are alternate ordering forms, while an added suffix can denote a specific packing or grade. Confirm the package, temperature range, flash density, RAM capacity, peripheral set, and automotive qualification before schematic release. Also avoid treating the presence of RAM guarding, flash CRC, or illegal-access detection as automatic safety certification; the project must complete the required safety analysis and documentation.
Impormasyon ng Pagsunod sa Kautusan
The device is positioned as an automotive RL78/F12 microcontroller, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not present in the available product records. Confirm these attributes for the exact ordering suffix before release.