R5F10PMJKFB#X5 - Low-Power Automotive MCU | Renesas
MPN: R5F10PMJKFB#X5 ✓ NakahandaR5F10PMJKFB#X5 Ulas
An automotive microcontroller is a semiconductor device that executes embedded control software, monitors sensors, operates actuators, and communicates across vehicle networks. Within the system hierarchy, this device belongs to the embedded microcontroller category, operates as a general-purpose control core, and adds vehicle-network and motor-control peripherals. The RL78/F14 family is an upper-level extension of the RL78/F13 and is designed for low-consumption automotive electronics.
The RL78/F14 family provides built-in CAN and LIN modules for automotive communication. These interfaces support the controller and transceiver connections commonly required in body, comfort, thermal-management, and motor-control electronic modules. The family also supports brushless DC motor control and includes timer RD, comparator, and functional-safety-oriented capabilities described by Renesas for applications requiring dependable peripheral behavior and deterministic control.
The R5F10PMJKFB#X5 combines these communication and control functions in one device. Its low-consumption design is relevant to battery-powered and intermittently operated vehicle modules, where reducing standby current helps control energy use. The LFQFP package provides a conventional leaded automotive assembly format and supports inspection, rework, and prototype assembly workflows that can be difficult with very fine-pitch leadless packages.
Typical automotive uses include motor-control units, CAN and LIN network nodes, BLDC fan or pump controllers, compact body-control modules, and low-power vehicle interface controllers. In these systems, the microcontroller can coordinate sensor inputs, apply diagnostic logic, manage communication traffic, and generate the timing required by actuators. Individual peripheral assignments remain subject to the device pin configuration, package, electrical limits, and the manufacturer pin-description table.
Design should begin with the LFQFP land pattern, pin multiplexing, exposed operating limits, and the recommended decoupling network. Verify that the selected automotive qualification, temperature range, oscillator arrangement, communication transceiver interface, and motor-control outputs satisfy the vehicle platform requirements. Keep high-current or inductive motor paths separate from sensitive control and communication routing, and validate reset, watchdog, power-state, and brownout behavior in the final power architecture.
This product summary combines the Renesas family positioning, automotive communication capabilities, package information, cross-reference status, and practical design considerations. It is intended to help engineers identify the correct RL78/F14 device and verify compatibility against the manufacturer datasheet, device pin table, and automotive qualification requirements.
Mga alternatibo na pwedeng ilagay na R5F10PMJKFB#X5 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok R5F10PMJKFB#X5 (parehas na form factor at footprint) — pagkakaiba sa Functional Safety Features, Package, Product Type.
R5F10PLJKFB#X5
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F10PMJKFB#V5
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →R5F10PMJKFB#X5 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit automotive microcontroller IC |
| Product Family | RL78/F14 |
| Series Positioning | Upper-level product to RL78/F13 |
| Automotive Application | Low-consumption automotive electronics |
| CAN Interface | Built-in CAN module |
| LIN Interface | Built-in LIN module |
| BLDC Motor Control | Supported by RL78/F14 family |
| Timer RD Support | Supported by RL78/F14 family |
| Comparator Support | Supported by RL78/F14 family |
| Functional Safety Features | Supported by RL78/F14 family |
| Family Flash Memory Range | 48 kB to 256 kB |
| Family Pin Count Range | 30 pins to 100 pins |
| Packhaging | LFQFP |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng R5F10PMJKFB#X5 lfqfp
Pin configuration para sa R5F10PMJKFB#X5 (lfqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa R5F10PMJKFB#X5.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
R5F10PMJKFB#X5 ay nararapat para sa 6 aplikasyons: Automotive CAN Interface Modules, LIN Network Control Units, BLDC Motor Control, Low-Power Body Control Modules, Automotive Thermal Management, Automotive Sensor Hubs.
Automotive CAN Interface Modules
The R5F10PMJKFB#X5 fits compact CAN interface modules because the RL78/F14 family includes a built-in CAN module and emphasizes low consumption. It can process vehicle-network traffic, run diagnostics, coordinate sensor input, and control compact electronic-control functions without relying on a separate communications processor. The LFQFP format also suits automotive PCB assembly methods that favor individually inspectable leads. Final deployment requires checking the exact transceiver interface, pin multiplexing, operating voltage, automotive qualification, and timing limits in the package-specific documentation.
Inirekomenda
LIN Network Control Units
The R5F10PMJKFB#X5 is suitable for LIN-connected vehicle modules because its RL78/F14 family provides an integrated LIN module alongside low-consumption operation. A compact controller can poll distributed sensors, actuate simple loads, apply diagnostic logic, and manage low-power states within the vehicle network. The design should allocate pins using the manufacturer multiplexing table and isolate the LIN physical layer through an appropriate external transceiver. Qualification, supply limits, and exact peripheral resources must be verified before production release.
Inirekomenda
BLDC Motor Control
The R5F10PMJKFB#X5 supports the RL78/F14 family's brushless DC motor-control capability for compact automotive fan, pump, and actuator controllers. Timers and comparator functions can participate in rotor-position sensing, while embedded control software performs commutation, fault handling, and communication with the vehicle network. Low-consumption characteristics benefit modules that operate intermittently. Motor selection must account for the exact timer channels, output drive limits, protection requirements, package pin assignment, and thermal conditions documented for this device.
Inirekomenda
Low-Power Body Control Modules
The R5F10PMJKFB#X5 can serve as the central controller in a low-power automotive body module that coordinates switches, sensors, actuators, and vehicle-network messages. The RL78/F14 family's low-consumption focus is particularly relevant when the module spends significant time in a stopped or standby state. Its LFQFP package supports conventional automotive inspection and rework processes. Engineers should confirm reset behavior, wake-up sources, GPIO availability, watchdog operation, supply range, and qualification for the target vehicle platform.
Inirekomenda
Automotive Thermal Management
The R5F10PMJKFB#X5 can support compact thermal-management controllers that monitor temperature, operate a fan or pump, and exchange diagnostic or control information through CAN or LIN. Its integrated communication modules reduce the need for separate interface logic, while low-consumption operation helps modules that are inactive for extended periods. The controller design should use the exact timer, comparator, and I/O assignments from the datasheet and include suitable fault handling for stalled motors, sensor failures, and unexpected network conditions.
Inirekomenda
Automotive Sensor Hubs
The R5F10PMJKFB#X5 is appropriate for sensor-hub and interface-controller duties that require local processing plus vehicle-network connectivity. It can evaluate digital or analog sensor inputs, perform threshold and diagnostic logic, filter noisy measurements, and report system status over CAN or LIN. Low-consumption behavior helps when the hub remains connected but mostly idle. Analog front-end characteristics, ADC resources, timing resolution, and pin multiplexing must be verified from the exact device documentation rather than inferred from the family description.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for R5F10PMJKFB#X5 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | R5F10PLJKFB#X5 | R5F10PMJKFB#V5 |
|---|---|---|---|
| Package | LFQFP | LFQFP; exact pin count requires confirmation | LFQFP; exact pin count requires confirmation |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Product Family | RL78/F14 | RL78/F14 | RL78/F14 |
| Product Type | 16-bit automotive microcontroller | 16-bit automotive microcontroller | 16-bit automotive microcontroller |
| CAN Interface | Built-in | Built-in at family level | Built-in at family level |
| LIN Interface | Built-in | Built-in at family level | Built-in at family level |
| BLDC Motor Control | Supported | Supported at family level | Supported at family level |
| Low-Consumption Positioning | Yes | Yes at family level | Yes at family level |
| Automotive Positioning | Automotive applications | Automotive applications | Automotive applications |
Pangunahing mga Pagkakaiba
- Integrated vehicle-network interfaces (kumpara saR5F10PLJKFB#X5)
- BLDC motor-control suitability (kumpara saR5F10PMJKFB#V5)
- Low-consumption automotive positioning (kumpara saR5F10PLJKFB#X5)
Talaan ng Disenyo
Assign the PCB footprint from the LFQFP package drawing associated with the complete ordering code, not from the family name alone. Confirm lead pitch, body dimensions, pad length, pin numbering, and solderable area before releasing Gerber data. The CAN, LIN, supply, ground, clock, and programming pins must be placed according to the device pin-description table, and sensitive signal routing should avoid motor-driver and inductive-load paths.
Design the supply network for the exact operating-voltage range and current limits in the manufacturer electrical-characteristics table. Place the required input and decoupling capacitors close to their assigned pins, maintain the specified trace and return-path geometry, and account for voltage drop and transient margin across the complete vehicle power architecture. Verify startup, reset, and brownout behavior against the MCU system requirements before production testing.
Separate CAN and LIN interface routing from motor-control outputs, clocks, and analog sensing lines. Use continuous ground references, controlled return paths, and appropriate termination or protection networks recommended by the communication-interface design guidance. For BLDC systems, route high-current motor phases away from the microcontroller and sensor circuitry, and evaluate motor transients against every affected supply and signal pin.
Do not treat a shared RL78/F14 family name as proof of interchangeability. Ordering suffixes can affect package form, temperature grade, qualification, or other commercial attributes. Before substitution, compare the complete ordering code, memory capacity, RAM, GPIO count, pin multiplexing, clock, supply limits, peripheral set, and package drawing. Also validate software compatibility because peripheral configuration and interrupt behavior can change between device variants.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer identifies automotive applications and the RL78/F14 family, but the exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for this ordering code is not stated in the retrieved product information.