R5F21112FP#U0 - 16-bit 20MHz 8KB Flash MCU | Renesas
MPN: R5F21112FP#U0 ✗ Tapus ng BuhayR5F21112FP#U0 Ulas
The MCU operates from a 3 V to 5 V supply, with the available product information identifying a 3/5 V device. The R5F21112FP family uses a high-performance silicon gate CMOS process and is packaged as a 32-pin plastic molded LQFP. Its 8 KB flash memory provides on-chip program storage for firmware, while the 16-bit CPU core supports efficient control-loop and peripheral-oriented software execution.
Key characteristics include a 20 MHz maximum operating frequency, 8 KB flash memory and a 32-LQFP (7 x 7 mm) package. The available distributor and manufacturer listings identify this part as an R8C/1x/11 microcontroller. The verified product information does not include detailed RAM size, peripheral inventory, ADC specifications, timer resources, I/O count or electrical timing values, so those details should be confirmed in the manufacturer datasheet before final design release.
R5F21112FP#U0 is suitable for compact embedded controllers, industrial equipment, appliance controls, instrumentation, serial-interface products and general-purpose embedded control boards. Its small LQFP package can support prototype and moderate-volume production layouts when the required peripheral and pin functions are available. Designers should verify the exact pin assignments, clock requirements, reset behavior and memory map against the official documentation before PCB routing or firmware development.
The most important engineering consideration is that the #U0 ordering suffix and 32-LQFP footprint do not, by themselves, establish complete drop-in compatibility with another MCU. Pin assignment, core architecture, memory size, peripheral resources, voltage tolerance and timing must all be compared. This page consolidates the verified distributor and Renesas product information while avoiding unsupported assumptions about missing technical parameters.
Mga alternatibo na pwedeng ilagay na R5F21112FP#U0 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
R5F21112DFP#U0
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F21112FP#U0 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit microcontroller |
| Series | R8C/1x/11 |
| CPU Core | R8C/Tiny Series |
| Maximum Operating Frequency | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Supply Voltage na Operasyon | 3/5 V |
| Packhaging | 32-LQFP (7 x 7 mm) |
| Package Type | Plastic molded LQFP |
| Bilang ng Pin | 32 pins |
| Uri ng Pagpapasok | Surface mount |
| Silicon Process | High-performance silicon gate CMOS |
| Program Memory Type | Flash |
| Lead-Free Status | Pb-free |
| Hanay ng Temperature na Operasyon | -20 °C to +85 °C |
Gabay sa Pin Configuration ng R5F21112FP#U0 plastic molded lqfp
Pin configuration para sa R5F21112FP#U0 (plastic molded lqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa R5F21112FP#U0.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
R5F21112FP#U0 ay nararapat para sa 6 aplikasyons: Compact Industrial Control Board, Appliance and Equipment Controller, Serial Interface Product, Instrumentation and Measurement Module, Battery-Powered Portable Device, LED and Display Controller.
Compact Industrial Control Board
The R5F21112FP#U0 fits compact industrial control tasks that call for a 16-bit processor, 20 MHz operating speed and 8 KB of on-chip flash without a larger external-memory package. Its 32-LQFP 7 x 7 mm outline leaves usable board area around the controller for sensors, power conversion and communications. The -20 °C to +85 °C rating supports many factory and building-automation environments. Before committing to a layout, verify the complete GPIO map, peripheral inventory, watchdog behavior and timing limits in the Renesas datasheet because those details are not present in the supplied product snippets.
Inirekomenda
Appliance and Equipment Controller
R5F21112FP#U0 is appropriate for appliance controls, small equipment and user-interface controllers where a dedicated microcontroller must manage sequencing, discrete inputs and local outputs. Its 16-bit R8C/Tiny-series core executes control firmware efficiently at up to 20 MHz, while 8 KB flash provides on-board program storage for a compact product. The 32-LQFP package is manageable for multilayer PCB assembly, although pin density and thermal behavior should be checked against the assembly process. Confirm peripheral availability, UART or serial-interface requirements and exact supply limits before using the part as a final design choice.
Inirekomenda
Serial Interface Product
The R5F21112FP#U0 can serve as the control core in serial-interface products because it combines a 16-bit architecture, 20 MHz performance and 8 KB flash with a compact 32-LQFP footprint. It is potentially useful for configuration adapters, protocol bridges and service interfaces where deterministic embedded control is needed. The verified snippets do not identify UART, SPI, CAN or USB resources, so engineers must confirm that the required serial peripheral exists in the exact R5F21112FP device. Interface voltage levels, timing and pin multiplexing must also be validated before PCB release.
Inirekomenda
Instrumentation and Measurement Module
R5F21112FP#U0 is suitable for compact instrumentation modules that require local control, firmware storage and a low-voltage microcontroller without a high-pin-count package. Its 16-bit core can support measurement sequencing and control logic, while the 8 KB flash capacity may suit focused embedded applications. The verified data does not provide ADC resolution, comparator features, timer accuracy or memory-mapped peripheral details, so analog measurement suitability cannot be inferred. Engineers should check those resources and the 3/5 V operating class in the official datasheet before selecting the MCU.
Inirekomenda
Battery-Powered Portable Device
The R5F21112FP#U0 can serve as the embedded controller in a low-voltage portable product where a compact controller and modest flash requirement are primary concerns. The listed 3/5 V operating class allows use with regulated 5 V or compatible low-voltage rails, and the 20 MHz R8C core provides more than enough nominal processing capability for basic sequencing and local control. However, verified sleep currents, active current, analog functions and wake-up sources are unavailable. Power-budget decisions should therefore wait for datasheet verification, particularly for battery-life-critical products.
Inirekomenda
LED and Display Controller
R5F21112FP#U0 may be used in small LED-control or display-support modules where local timing, button handling and pattern generation are required. Its 16-bit core and 20 MHz clock rate provide ample nominal processing bandwidth for non-demanding control tasks, and the 8 KB flash allows compact embedded firmware storage. The verified material does not list PWM channels, display interfaces, comparators or timer resources, so LED dimming and display timing cannot be assumed. Confirm those functions, along with pin assignment and operating temperature requirements, in the manufacturer documentation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for R5F21112FP#U0 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | R5F21112DFP#U0 |
|---|---|---|
| Package | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) |
| Brand | Renesas Electronics | Renesas Electronics |
| Product Type | 16-bit microcontroller | 16-bit microcontroller |
| Series | R8C/1x/11 | R8C/11 |
| CPU Core | R8C/Tiny Series | R8C |
| Flash Memory | 8 KB (8K x 8) | 8 KB |
| Operating Voltage | 3/5 V | 2.7 V to 5.5 V |
Pangunahing mga Pagkakaiba
- Exact target ordering suffix (kumpara saR5F21112DFP#U0)
- Manufacturer-defined product configuration (kumpara saR5F21112DFP#U0)
- Documented temperature coverage in the verified results (kumpara saR5F21112DFP#U0)
Talaan ng Disenyo
Do not treat a matching 32-LQFP outline or the R5F21112 family name as proof of a drop-in replacement. Before substituting R5F21112DFP#U0, compare the Renesas ordering information, package drawing, numbered pins, power pins, peripheral multiplexing, supply limits, flash and RAM organization, clock circuit and watchdog behavior. The verified comparison result confirms family-level similarities but does not provide the evidence needed to guarantee firmware and PCB interchangeability.
Route the 32-LQFP device with an assembly-compatible land pattern and verify pin 1 orientation against the current package drawing. Keep the 3/5 V supply path short, provide local bypass capacitance as directed by the manufacturer datasheet and isolate noisy switching or motor-drive return currents from sensitive control signals. Because exact pin names and decoupling values are absent from the supplied data, use the official schematic and layout guidance rather than values inferred from generic MCU practice.
The listed 3/5 V operating class should be checked against the exact device limits before selecting a regulator. The cross-reference result describes R5F21112DFP#U0 as operating from 2.7 V to 5.5 V, but that range must not be transferred to the FP suffix without manufacturer confirmation. Review absolute maximum and recommended operating conditions, then size the supply for the MCU, external loads and any required startup margin.
Impormasyon ng Pagsunod sa Kautusan
The verified Mouser listing identifies R5F21112FP#U0 as Pb-free. No verified RoHS, REACH, AEC-Q100, halogen-free or conflict-minerals statement was supplied.