S9S12H128J1VPVER - 16-Bit 50MHz 128KB Flash MCU | NXP
MPN: S9S12H128J1VPVER ✗ Tapus ng BuhayS9S12H128J1VPVER Ulas
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. This HCS12 MCU belongs to the embedded-controller hierarchy: 16-bit MCU → HCS12 microcontroller → embedded processing → automotive electronics. It is intended for systems requiring deterministic embedded control, serial communication, timing, and analog or digital interface functions.
The verified source data identifies the HCS12 CPU, 16-bit architecture, 50 MHz operating frequency, and 128 KB flash organized as 128K × 8. The 112-LQFP package supports surface-mount assembly, while the automotive qualification and -40°C to +105°C rating suit equipment operating across extended temperature conditions. Exact RAM, supply voltage, peripheral list, and memory endurance are not supplied and are therefore not inferred.
Within an embedded design, the MCU can serve as the central controller for automotive body, chassis, powertrain-adjacent, sensor, and communication subsystems. The 128 KB program-memory capacity provides room for boot code, application logic, diagnostics, and communication handlers. The 50 MHz clock rating enables time-sensitive control tasks, although real timing performance must be evaluated against the selected peripherals, bus architecture, memory wait states, and firmware workload.
Typical integration places the MCU beside power regulation, sensing, actuation, and communication circuitry. Inputs should be checked against the manufacturer electrical limits, while unused pins must follow the official pin-multiplexing and termination guidance. Because only the summarized distributor information was supplied, no detailed pin names, peripheral assignments, or electrical limits should be inferred without the official device documentation.
When sourcing this part, verify the exact package, temperature grade, flash configuration, qualification status, and ordering suffix. The supplied data shows distributor listings from Rochester Electronics and NXP, but it does not provide a manufacturer datasheet URL, lifecycle declaration, price, or confirmed production status. This page therefore separates verified facts from unavailable technical and commercial fields rather than extrapolating them.
Mga alternatibo na pwedeng ilagay na S9S12H128J1VPVER — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok S9S12H128J1VPVER (parehas na form factor at footprint) — pagkakaiba sa Automotive Qualification, Package, Mounting Type, RoHS Status, ADC.
S9S12H128J2VFVE
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →S9S12H256J1VFVER
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →S9S12H256J1VFVE
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MC9S12H128J1VPVE
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MC9S12H128J2VFVE
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
S9S12H128J1VPVER Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 16-bit HCS12 microcontroller |
| CPU Core | HCS12 CPU |
| Architecture | 16-bit |
| Maksimum na Taktiko ng Oras | 50 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Program Memory Organization | 128K x 8 |
| Hanay ng Temperature na Operasyon | -40°C to +105°C |
| Automotive Qualification | Automotive Qualified |
| Package Type | 112-LQFP |
| Package Dimensions | 20 mm x 20 mm |
| Package Family | LQFP-112 |
| Uri ng Pagpapasok | Surface mount |
| Manufacturer | NXP Semiconductors |
| Legacy Manufacturer | Freescale Semiconductor |
Gabay sa Pin Configuration ng S9S12H128J1VPVER lqfp-112
Pin configuration para sa S9S12H128J1VPVER (lqfp-112 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa S9S12H128J1VPVER.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
S9S12H128J1VPVER ay nararapat para sa 7 aplikasyons: Automotive Body Control, Automotive Sensor Interface, Powertrain Adjacent Controller, Vehicle Communication Gateway, Industrial Controller, Embedded Diagnostic Controller, Actuator and Relay Control.
Automotive Body Control
The S9S12H128J1VPVER is a candidate for centralized automotive body-control logic because the verified data identifies a 16-bit HCS12 MCU, 50 MHz operation, 128 KB flash, and a -40°C to +105°C temperature range. It could organize door, lighting, wiper, locking, and diagnostic functions in one embedded controller. The principal design trade-off is that the supplied records do not define the detailed peripheral map or transient limits, so the final device choice depends on official electrical and pin documentation.
Inirekomenda
Automotive Sensor Interface
The 128 KB flash and 50 MHz 16-bit HCS12 core can support an automotive sensor-interface subsystem that combines input sampling, filtering, diagnostics, and communication handling. The verified -40°C to +105°C range makes the part a candidate for temperature-varying vehicle environments. However, ADC resolution, timer resources, input voltage, and communication interfaces are not present in the supplied data and must be verified before assigning this device to a specific sensor architecture.
Inirekomenda
Powertrain Adjacent Controller
S9S12H128J1VPVER may be evaluated for a powertrain-adjacent control module when the system requires a 50 MHz embedded controller and extended-temperature operation. Its 16-bit HCS12 architecture is suited to deterministic supervisory logic, diagnostics, and actuator coordination outside the most demanding direct motor-drive path. Actual suitability cannot be confirmed from the supplied records because injector, timer, ADC, voltage, transient, and safety requirements are not specified.
Inirekomenda
Vehicle Communication Gateway
The device's stated 128 KB flash can provide program storage for communication protocol handling, message routing, diagnostics, and boot or update code, while the 50 MHz HCS12 core supports time-dependent embedded tasks. The verified data does not identify CAN, LIN, Ethernet, or other communication peripherals, so those functions must be confirmed before design commitment. A communication gateway should also account for bus fault tolerance and automotive transient requirements not present in the supplied records.
Inirekomenda
Industrial Controller
The S9S12H128J1VPVER can be considered for an industrial controller requiring a 16-bit MCU, 50 MHz processing capability, and 128 KB program memory. Its verified -40°C to +105°C range supports extended-temperature equipment, while the 112-LQFP package provides a defined high-pin-count mounting format. Industrial use still requires checking supply voltage, watchdog, communications, I/O levels, EMC, and lifecycle availability against the complete manufacturer documentation.
Inirekomenda
Embedded Diagnostic Controller
The S9S12H128J1VPVER's 128 KB flash can hold diagnostic software, fault-state tables, startup checks, and service routines alongside application firmware. Its 50 MHz 16-bit HCS12 core can support bounded control tasks, but the supplied data does not confirm diagnostic peripherals, memory protection, watchdog behavior, or functional-safety mechanisms. These omissions make the part suitable for initial architecture evaluation rather than final safety-critical release without the official datasheet.
Inirekomenda
Actuator and Relay Control
A 16-bit HCS12 microcontroller can coordinate relays, solenoids, lamps, and other automotive or industrial actuators through discrete interface circuitry. The S9S12H128J1VPVER's stated 50 MHz clock provides a timing margin for debounce, state-machine execution, and fault monitoring, while the 112-LQFP package exposes many potential signal pins. The supplied data does not identify I/O levels, drive capabilities, timer pin mappings, or output limits, so all actuator paths require electrical verification.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for S9S12H128J1VPVER — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | S9S12H128J2VFVE | S9S12H256J1VFVER | S9S12H256J1VFVE | MC9S12H128J1VPVE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Freescale Semiconductor |
| Package | 112-LQFP (20 mm x 20 mm) | LQFP-112; exact dimensions not verified | LQFP-112; exact dimensions not verified | LQFP-112; exact dimensions not verified | LQFP-112; exact dimensions not verified |
Pangunahing mga Pagkakaiba
- Verified automotive-oriented temperature specification (kumpara saS9S12H128J2VFVE)
- Confirmed 128 KB flash configuration (kumpara saS9S12H256J1VFVER)
- Explicit 50 MHz verified operating frequency (kumpara saMC9S12H128J1VPVE)
- Exact verified package format (kumpara saS9S12H256J1VFVE)
Talaan ng Disenyo
Do not begin layout from the package designation alone. The verified data identifies a 112-LQFP, 20 mm x 20 mm package, but the supplied records do not include the pin map or exposed-pad details. Download the exact VPVER device drawing and pin table, verify power, ground, reset, clock, debug, and no-connect assignments, and preserve the manufacturer's recommended land pattern and thermal-via geometry.
Supply-voltage limits and external component requirements are not included in the verified data. Before power-up, determine the device's valid operating range from the official datasheet, then design the regulator and decoupling network for the required transient and electromagnetic environment. Do not infer voltage levels from the 50 MHz clock rating or the automotive-qualified description.
The package is specified as 112-LQFP, but thermal resistance and maximum junction temperature are not provided. For an automotive or industrial enclosure, calculate estimated power dissipation from the actual supply voltage, I/O loading, clock behavior, and peripheral activity, then compare the resulting junction-temperature estimate with the official thermal limits. Maintain copper and via area according to the package drawing.
Avoid ordering by partial HCS12 family similarity. VPVER, VPVE, and VFVER suffixes may represent different package, temperature, qualification, or memory configurations, and the supplied records do not prove interchangeability. Before substituting any candidate, compare the complete ordering code, pin-by-pin map, clock, flash, RAM, peripherals, electrical limits, and qualification documentation.
The supplied information does not specify external clock requirements, communication peripherals, or I/O timing. Validate the oscillator, clock-tree configuration, reset behavior, debug interface, and every external signal against the official electrical and timing documentation. In particular, do not assume that two similarly named HCS12 devices share peripheral mapping or interrupt behavior.
Impormasyon ng Pagsunod sa Kautusan
The verified data states automotive qualified but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals documentation. Obtain current compliance and qualification records from NXP or the authorized distributor.
