SFR2500002550FR500 - 255Ω 0.4W 1% Metal Film Resistor | Vishay
MPN: SFR2500002550FR500 ✓ NakahandaSFR2500002550FR500 Ulas
A metal film resistor is a passive electronic component whose resistive element is a thin homogeneous layer of metal alloy deposited on a high-grade ceramic substrate, then laser-trimmed to a precise resistance value. Metal film technology sits above carbon film in the resistor taxonomy (carbon film -> metal oxide film -> metal film -> precision wirewound), offering superior noise performance, tighter tolerance, and lower temperature coefficient - making metal film the default choice for general-purpose precision analog and signal-conditioning circuitry where carbon film drift or noise would be unacceptable.
Key features include a low-noise specification of maximum 1.5 µV/V for resistances above 1 MΩ, a long-term stability rating typical of the SFR25 family, lead-free construction compliant with current RoHS directives, and stable operation across industrial temperature ranges. The 0207 axial form factor provides mechanical robustness for through-hole assembly while remaining compact enough for dense PCB layouts.
Technically, the SFR25 construction uses a vacuum-deposited metal alloy film on a ceramic body, followed by a helical cut that precisely sets the resistance value. The end caps are force-fit, and the leads are tin-plated copperweld for reliable solderability. This process yields the tight ±1% tolerance directly out of the box, eliminating the need for hand-selection in most precision designs.
Typical applications include precision analog signal conditioning, instrumentation amplifier gain-setting, ADC/DAC reference networks, general-purpose pull-up/pull-down resistors in mixed-signal designs, and audio preamplifier circuitry where low noise is critical. The 255 Ω value is commonly used in RF termination networks, current-sense shunt references, and 4-20 mA loop termination.
When designing with this part, observe derating guidelines - at 70 °C ambient the rated 0.4 W should be reduced to keep the hot-spot temperature below the 155 °C maximum. For high-impedance circuits, the low noise specification ensures negligible self-generated voltage across the resistor.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in any single manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na SFR2500002550FR500 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
SFR2500001000FR500
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SFR2500001001FR500
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SFR2500001500FR500
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SFR2500004700FR500
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SFR2500002551FR500
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SFR2500002550FR500 Mga Pinakamataas na Rating at Electrical Characteristics
| Manufacturer | Vishay Beyschlag / BC Components |
| Series | SFR25 |
| Historical Part Number | SFR55 |
| Resistance | 255 Ω |
| Tolerance | ±1% |
| Power Rating | 0.4 W (400 mW) |
| Temperature Coefficient (TCR) | ±100 ppm/°C |
| Composition | Metal Film |
| Packhaging / Kaso | Axial (0207 size) |
| Uri ng Pagpapasok | Through Hole |
| Packaging | Tape & Reel (TR), 5000 pcs/reel |
| Lead Free Status | Lead Free |
| Noise | Max. 1.5 µV/V (for > 1 MΩ) |
| Temperature na Operasyon | -55 °C to +155 °C |
| RoHS Compliance | Compliant |
| Construction | Vacuum-deposited metal alloy film on ceramic body, helical cut |
Gabay sa Pin Configuration ng SFR2500002550FR500 axial (0207 size)
Pin configuration para sa SFR2500002550FR500 (axial (0207 size) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SFR2500002550FR500.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SFR2500002550FR500 ay nararapat para sa 6 aplikasyons: Precision Analog Signal Conditioning, Current-Sense Shunt for Low-Current Sensing, Industrial 4-20 mA Loop Termination, Audio Preamplifier Bias Networks, ADC/DAC Reference and Pull-Down Networks, General-Purpose Pull-Up and Pull-Down.
Precision Analog Signal Conditioning
The SFR2500002550FR500's ±1% tolerance and ±100 ppm/°C TCR make it a strong fit for instrumentation amplifier gain-setting and active filter networks. With resistance tolerance five to ten times tighter than typical carbon film, it eliminates the need for trim pots in many precision designs. The 255 Ω value pairs naturally with op-amp feedback topologies such as inverting gain stages and Sallen-Key filters, where stable component values directly determine filter Q and cutoff accuracy.
Inirekomenda
Current-Sense Shunt for Low-Current Sensing
The 255 Ω resistance of the SFR2500002550FR500 makes it a viable low-side current-sense shunt for instrumentation monitoring 1-30 mA loads. At a 10 mA load current, the resistor develops 2.55 V across it, well suited to the common-mode range of most instrumentation amplifiers. The metal film construction minimizes thermoelectric EMF errors versus carbon film. Designers must respect the 0.4 W power rating - at 39 mA the resistor reaches its dissipation limit, so the part is best for low-current monitoring paths rather than power-rail current sensing.
Inirekomenda
Industrial 4-20 mA Loop Termination
The SFR2500002550FR500 is well suited to industrial process-control current loops where its 255 Ω value (in conjunction with parallel precision components) maps a 4-20 mA signal into a 1-5 V process variable for ADC acquisition. The ±1% tolerance ensures loop calibration stays within ISA 50.1 limits. Metal film's low noise floor (max 1.5 µV/V) preserves measurement integrity in HART-modulated signals superimposed on the loop current, where wideband noise would otherwise degrade digital communications reliability.
Inirekomenda
Audio Preamplifier Bias Networks
Low-noise audio preamplifier stages benefit from the SFR2500002550FR500's metal film construction, which generates significantly less current noise than carbon film alternatives. The 255 Ω value is commonly used as an emitter degeneration resistor in low-noise transistor input stages, where its tight tolerance directly sets stage transconductance and DC bias point stability. Combined with a thermally-matched environment, the ±100 ppm/°C TCR keeps bias drift within manageable limits across the amplifier's operating temperature range.
Inirekomenda
ADC/DAC Reference and Pull-Down Networks
In mixed-signal designs, the SFR2500002550FR500 serves as a precision pull-down, pull-up, or termination resistor adjacent to ADC inputs or DAC outputs. Tight ±1% tolerance improves linearity by eliminating mismatch between channels, while the metal film technology minimizes leakage and parasitic inductance versus surface-mount alternatives in low-frequency precision paths. Designers typically place the resistor as close to the converter pin as the through-hole package allows on mixed-technology boards.
Inirekomenda
General-Purpose Pull-Up and Pull-Down
The SFR2500002550FR500 works well as a digital logic pull-up or pull-down where its 255 Ω value combined with 0.4 W rating supports a wide range of pull-strength requirements. The through-hole form factor is mechanically robust for test points, debugger interfaces, and front-panel signal conditioning in industrial and laboratory equipment. At 5 V logic levels, the resistor dissipates only 100 mW in worst-case short circuit, well within its rating, making it a safe choice in legacy and through-hole assembly lines.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SFR2500002550FR500 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SFR2500001000FR500 | SFR2500001001FR500 | SFR2500001500FR500 | SFR2500004700FR500 | SFR2500002551FR500 |
|---|---|---|---|---|---|---|
| Package | Axial 0207 through-hole | Axial 0207 through-hole - same | Axial 0207 through-hole - same | Axial 0207 through-hole - same | Axial 0207 through-hole - same | Axial 0207 through-hole - same |
| Brand | Vishay | Vishay | Vishay | Vishay | Vishay | Vishay |
| Resistance | 255 Ω | 100 Ω | 1 kΩ | 150 Ω | 470 Ω | 2.55 kΩ |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Power Rating | 0.4 W | 0.4 W | 0.4 W | 0.4 W | 0.4 W | 0.4 W |
| Temperature Coefficient | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C |
| Composition | Metal Film | Metal Film | Metal Film | Metal Film | Metal Film | Metal Film |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole |
Pangunahing mga Pagkakaiba
- Historical BC Components / Vishay BC heritage with active production (kumpara saGeneric carbon film equivalents)
- Industry-standard 0207 axial footprint for broad second-source compatibility (kumpara saProprietary through-hole resistor packages)
- Tape and reel packaging supports automated through-hole insertion (kumpara saBulk-packaged through-hole resistors)
Talaan ng Disenyo
At 70 °C ambient, the SFR2500002550FR500 is rated for 0.4 W continuous power dissipation, but must be linearly derated above that temperature to 0 W at 155 °C. At a worst-case 25 °C ambient with 1 oz copper through-hole pad, the part can safely handle close to its full 0.4 W rating. Estimated: at 0.4 W into a 50 °C ambient, the hot-spot rises approximately 30 °C above ambient due to the axial package's thermal resistance (~75 °C/W). Ensure PCB layout keeps the body away from heat-generating components.
Through-hole axial resistors like the SFR2500002550FR500 require drilled pad diameters of approximately 0.9-1.0 mm for the 0.6 mm leads. Standard 2.54 mm (0.1 inch) lead pitch is recommended with a minimum pad-to-pad spacing of 10 mm to accommodate the 6.3 mm body length. For wave soldering, apply adequate flux and verify lead wetting on the bottom pad; for hand assembly, pre-tin both pads and lead ends to ensure reliable joint formation.
Do not exceed the absolute maximum working voltage, which for the 0207-size SFR25 series is typically 250 V DC. Applying higher voltages can cause internal arcing between the helical film turns. Also, avoid mounting the resistor adjacent to large heat-generating components without verifying that the combined thermal environment still allows for proper power derating. Finally, observe the resistor's polarity-neutral construction; while it can be installed in either orientation, consistent lead-bending direction simplifies assembly and rework.
Impormasyon ng Pagsunod sa Kautusan
Lead-free and RoHS-compliant per Digi-Key product attributes. Not AEC-Q100 qualified (passive component, automotive qualification typically not applicable to through-hole resistors). Halogen-free construction implied by lead-free materials. Conflict minerals compliance per Vishay standard policy.
