SI2434-C-FS - 33.6 kbps V.34 ISOmodem | Silicon Laboratories
MPN: SI2434-C-FS ✓ NakahandaSI2434-C-FS Ulas
An ISOmodem is a modem IC that integrates data-processing and analog interface functions to reduce the component count required for a complete data communications modem. Within the product hierarchy, a modem controller belongs to the broader class of interface ICs, while the data format is defined by the V.34 recommendation and the physical interface functions through the ISOmodem architecture. The system-side designation indicates that this part is intended for the equipment side of the data link rather than the central-office side.
The SI2434-C-FS uses a 3.3 V operating supply and supports data rates up to 33.6 kbps. Its 16-SOIC package is a surface-mount, 0.154-inch-wide body format with a stated body width of 3.90 mm. The exact lead pitch, temperature range, maximum supply voltage, current consumption, exposed interface levels, and supported country-network restrictions must be confirmed against the manufacturer datasheet before a new PCB or production release is approved.
The device belongs to the Si2434 chipset generation, which also included V.90, V.34, V.32BIS, and V.22BIS ISOmodem capabilities. This legacy positioning is important for engineers supporting installed telecommunications equipment: the useful design question is not only whether the data rate meets the application, but also whether the required line interface, signaling profile, clocking arrangement, and regulatory/network behavior match the original system.
Typical uses include system-side modem sections in industrial data communications, remote-control equipment, legacy data terminals, point-of-sale systems, and embedded communications equipment that must interoperate with an existing V.34 network. The device may be paired with isolation, line-interface, clock-generation, and signal-conditioning components selected for the host board and network environment.
A new design should use the manufacturer pin-description table and reference circuits to assign tracks rather than inferring connections from the package outline. Verify the analog and digital interfaces, supply sequencing, decoupling, exposed-ground requirements, and any regulatory or network-approval constraints. For a previously qualified board, compare both electrical functions and package geometry before substitution.
This product record combines the exact ordering information, package information, protocol description, cross-reference evidence, and engineering-oriented selection guidance needed to evaluate the SI2434-C-FS for legacy modem and interface designs.
Mga alternatibo na pwedeng ilagay na SI2434-C-FS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
SI2434-C-FSR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI2434-C-FS Mga Spesipikasyon
| Product Type | System-side V.34 data ISOmodem |
| Maximum Data Rate | 33.6 kbps |
| Data Format | V.34 |
| Supply Voltage na Operasyon | 3.3 V |
| Packhaging | 16-SOIC (0.154 in, 3.90 mm width) |
| Uri ng Pagpapasok | Surface mount |
| Packaging Type | Tube |
| Lead-Free Status | Lead-free |
| ECCN | EAR99 |
| Introduction Date | November 13, 2000 |
Gabay sa Pin Configuration ng SI2434-C-FS 16-soic (0.154 in, 3.90 mm width)
Pin configuration para sa SI2434-C-FS (16-soic (0.154 in, 3.90 mm width) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SI2434-C-FS.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SI2434-C-FS ay nararapat para sa 6 aplikasyons: Legacy V.34 Data Terminals, Industrial Remote-Control Equipment, Point-of-Sale Terminals, Data Communication Gateways, Remote Monitoring and Control, Legacy Data Communications Equipment.
Legacy V.34 Data Terminals
The SI2434-C-FS fits the system-side modem section of a legacy data terminal that must communicate at up to 33.6 kbps using V.34 signaling. Its 3.3 V operating supply matches modern digital interface environments, while the 16-SOIC package supports compact, surface-mount assembly. The device is most appropriate where the host system already implements the required clocking, control, and data interface around the Si2434 chipset. Engineers should verify the original modem architecture and regional network requirements before adapting the circuit.
Inirekomenda
Industrial Remote-Control Equipment
The SI2434-C-FS can serve as the data-modem element in industrial remote-control equipment that exchanges low-speed information over a telephone or private-network line. Its 33.6 kbps V.34 capability is appropriate for supervisory commands, status data, and configuration transfers rather than high-bandwidth payload traffic. The 3.3 V supply and 16-SOIC package simplify integration into compact controller boards. Validation must include line-interface compatibility, isolation strategy, timing margins, and the network behavior required by the deployed equipment.
Inirekomenda
Point-of-Sale Terminals
SI2434-C-FS is suitable for point-of-sale terminals designed around a legacy V.34 modem path, especially equipment in which the controller already includes the expected clock, interface, and analog support circuitry. The system-side modem role and 33.6 kbps rate suit transaction traffic, remote service access, and periodic authorization exchanges. Its 16-SOIC package allows reuse of a mature board layout. Before redesigning a terminal, confirm the original modem chipset, approved network settings, line parameters, and the service-provider operating profile.
Inirekomenda
Data Communication Gateways
The SI2434-C-FS can provide the modem-facing section of a legacy data gateway that connects equipment using V.34 over a telephone line. At 33.6 kbps, the part is intended for supervisory and control traffic rather than modern broadband or high-speed industrial Ethernet. The 3.3 V operating supply and 16-SOIC footprint support established embedded designs, while the documented SI2434-C-FSR equivalent offers a sourcing option when the package format permits. Integration requires careful review of clocking, framing, line coupling, and network provisioning.
Inirekomenda
Remote Monitoring and Control
The SI2434-C-FS is appropriate for remote monitoring and control equipment that periodically transfers readings, alarms, and configuration records over a V.34-compatible line. Its 33.6 kbps rate is sufficient for small packets and command-oriented traffic, and the system-side architecture supports integration into a controller that already handles the host processor and analog line path. A compact 16-SOIC package also suits board-space-constrained legacy products. Field reliability depends on correct line conditioning, isolation, grounding, and uninterrupted compatibility with the deployed network.
Inirekomenda
Legacy Data Communications Equipment
The SI2434-C-FS is a practical choice when maintaining or cloning equipment built around the Si2434 system-side modem chipset. Its documented 33.6 kbps V.34 operation, 3.3 V supply, and 16-SOIC package allow a qualified assembly to be reproduced without changing the established PCB footprint. The larger Si2434 family also covered V.90, V.32BIS, and V.22BIS modes, allowing the same device family to support several legacy access arrangements. For production use, verify the exact pin functions, initialization procedure, line interface, and any network-specific restrictions in the manufacturer documentation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SI2434-C-FS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SI2434-C-FSR |
|---|---|---|
| Package | 16-SOIC (0.154 in, 3.90 mm width) | 16-SOIC - same |
| Brand | Silicon Laboratories | Silicon Laboratories |
| Maximum Data Rate | 33.6 kbps | 33.6 kbps |
| Data Format | V.34 | V.34 |
| Operating Supply Voltage | 3.3 V | 3.3 V |
| Device Role | System-side ISOmodem | System-side ISOmodem |
| Pin Compatibility | 16-pin terminal arrangement | Pin-compatible without PCB modification |
| Ordering or Packaging Format | FS variant, tube package | FSR variant |
| Functional Difference | 33.6 kbps V.34 modem operation | Same documented modem function |
Pangunahing mga Pagkakaiba
- Documented pin-compatible replacement path (kumpara saSI2434-C-FSR)
- Established system-side modem role (kumpara saSI2434-C-FSR)
- Multi-generation family support context (kumpara saSI2434-C-FSR)
Talaan ng Disenyo
Use the manufacturer datasheet pin-description table and reference schematic when laying out the SI2434-C-FS. Preserve the package pin sequence, place the device-side support components close to their associated pins, and avoid routing sensitive modem signals through areas containing switching nodes or high-current return paths. A mechanically compatible package is not enough for a drop-in decision: confirm every signal name, direction, supply requirement, and analog connection.
The SI2434-C-FS operates from a 3.3 V supply, but the complete system may include analog and digital sections with different settling and bypass requirements. Follow the manufacturer reference circuit for supply decoupling, grounding, and clock connections. Do not substitute an arbitrary bulk capacitor arrangement for the documented network, and verify power sequencing, voltage tolerance, and the maximum voltage permitted at each interface pin.
The modem interface must maintain clean clock and data timing because V.34 operation depends on correctly coordinated digital and analog functions. Keep modem traces short where possible, provide a continuous return path, and keep external switching circuitry physically separated from sensitive pins. Review rise-time, loading, and grounding against the host clock architecture; a nominally correct schematic can still fail if the board introduces excessive coupling or jitter.
Do not treat every Si2434-family ordering code as an interchangeable source. The FSR variant is documented as a direct replacement for the FS device because its performance, terminals, and package are consistent. By contrast, alternatives involving different suffixes, functions, or packages require individual pin and electrical review. Confirm the complete ordering code, tube or reel handling, date code, marking, and assembly temperature requirements before approving a substitution.
Impormasyon ng Pagsunod sa Kautusan
The component is identified as lead-free and carries ECCN EAR99. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.