SI3210-KT - 3.13V to 5.25V Telecom SLIC/CODEC | Silicon Labs
MPN: SI3210-KT ✓ NakahandaSI3210-KT Ulas
Mga alternatibo na pwedeng ilagay na SI3210-KT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
SI3210-GT
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI3210-FT
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI3210-KT Mga Spesipikasyon
| Device Type | Programmable CMOS SLIC/CODEC |
| Product Category | Telecom Interface IC |
| Fungsi | Subscriber Line Interface Concept (SLIC), CODEC |
| Channel Count | Single channel |
| Supply Voltage Minimum | 3.13 V |
| Supply Voltage Maximum | 5.25 V |
| Packhaging | 38-TSSOP |
| Package Type | Surface-mount TSSOP |
| Ringing Voltage Generation | Supported |
| Battery Voltage Generation | Supported |
| DTMF Support | Supported |
| Tindminan RoHS | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
| Lead-Free Status | Unknown |
| Halogen-Free Status | Unknown |
Gabay sa Pin Configuration ng SI3210-KT surface-mount tssop
Pin configuration para sa SI3210-KT (surface-mount tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SI3210-KT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SI3210-KT ay nararapat para sa 6 aplikasyons: Voice-over-Copper Terminals, Subscriber Line Access Equipment, Telephone Line Cards, Central Office Voice Interfaces, VoIP Analog Line Adapters, DTMF-Enabled Telephone Equipment.
Voice-over-Copper Terminals
The SI3210-KT fits voice-over-copper terminals because it combines a single-channel subscriber line interface, codec, DTMF support, ringing voltage generation, and battery voltage generation in one 38-TSSOP device. Its verified 3.13 V to 5.25 V supply range supports conventional telecom line-card supply environments. Using an integrated ProSLIC reduces the number of separate line-interface functions that must be coordinated, although the designer must confirm line impedance, ring waveform, off-hook current, and codec timing in the complete manufacturer datasheet.
Inirekomenda
Subscriber Line Access Equipment
The SI3210-KT is suitable for subscriber line access and line-card equipment because the device integrates the SLIC and codec functions required at the analog telephone-line boundary. Its supported 3.13 V to 5.25 V supply range and integrated 38-TSSOP package provide a defined basis for compact line-card designs. Ringing and battery voltage generation are especially relevant to line termination, while DTMF support assists signaling. Before schematic release, engineers should verify line-drive limits, external protection requirements, host interface behavior, and thermal performance.
Inirekomenda
Telephone Line Cards
The SI3210-KT can serve as the subscriber line interface on a telephone line card where a single analog voice channel must terminate a copper pair. Its integrated ringing and battery voltage generation support the line-side power conditions associated with idle, ring, and off-hook states, while the codec provides the voice conversion function. The 38-TSSOP footprint supports conventional surface-mount assembly. Because the supplied evidence omits exact current limits, timing, and pin definitions, the reference design and datasheet must be used to finalize protection and routing.
Inirekomenda
Central Office Voice Interfaces
The SI3210-KT is applicable to central-office voice interfaces that require an integrated analog subscriber-line termination with codec support. Combining the SLIC, codec, DTMF, ringing generation, and battery generation functions can reduce board complexity compared with separate line-interface blocks. Its verified 3.13 V to 5.25 V operating range should be checked against the central-office rail plan. The complete implementation must also account for surge protection, line impedance, codec synchronization, and the device-specific application circuit.
Inirekomenda
VoIP Analog Line Adapters
The SI3210-KT fits an analog line adapter used to bridge a VoIP endpoint to a copper telephone network because it combines the line-side interface and voice codec in a single component. DTMF handling, ringing generation, and battery voltage generation cover key PSTN-facing functions, while the single-channel configuration matches one-line adapters. The 3.13 V to 5.25 V supply range and 38-TSSOP package support compact embedded designs. Final validation should include echo-path behavior, ring cadence, off-hook loading, and host-control timing.
Inirekomenda
DTMF-Enabled Telephone Equipment
The SI3210-KT is appropriate for DTMF-enabled telephone and signaling equipment because the verified listing explicitly identifies DTMF capability in the integrated single-channel SLIC/codec. Combining DTMF handling with ringing and battery voltage generation can simplify a line-facing design while retaining a dedicated analog termination function. The device is supplied in a 38-TSSOP package for surface-mount assembly. Engineers should still confirm the supported tone modes, detection thresholds, codec clocking, and line-state behavior using the complete manufacturer documentation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SI3210-KT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SI3210-GT | SI3210-FT |
|---|---|---|---|
| Package | 38-TSSOP | 38-TSSOP - same | 38-TSSOP - same |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Device Type | Programmable CMOS SLIC/CODEC | Telecom Interface IC | Telecom Interface IC |
| Supply Voltage Minimum | 3.13 V | 3.13 V | 3.13 V |
| Supply Voltage Maximum | 5.25 V | 5.25 V | 5.25 V |
| Function | Subscriber Line Interface Concept (SLIC), CODEC | Telecom SLIC/CODEC | Telecom SLIC/CODEC |
| RoHS | Unknown | Unknown | Unknown |
Pangunahing mga Pagkakaiba
- Integrated telecom line-interface functions (kumpara saSI3210-GT)
- DTMF support is explicitly documented (kumpara saSI3210-FT)
- Defined package and supply range (kumpara saSI3210-GT)
Talaan ng Disenyo
Design the supply rails around the verified 3.13 V to 5.25 V SI3210-KT operating range and reserve headroom for ringing and battery-generation circuitry. Confirm whether the system supplies the line-related voltages externally or derives them according to the manufacturer application circuit. Use local high-frequency bypass capacitors close to the supply pins and validate startup, shutdown, and power-consumption behavior against the full datasheet.
Use the manufacturer 38-TSSOP land pattern and maintain short, direct connections for supply, ground, analog line, and codec-related signals. Place protection components associated with the external telephone-line connection at the board edge, while keeping high-energy transient current away from sensitive codec and control circuitry. Verify pin numbers against the official datasheet because the complete pinout was not available in the supplied source data.
Do not treat a same-package family member as a guaranteed drop-in replacement. SI3210-GT and SI3210-FT share the 38-TSSOP package and 3.13 V to 5.25 V supply range in the verified comparison pages, but replacement approval must also check line-drive limits, DTMF behavior, ringing and battery functions, codec timing, firmware configuration, and lifecycle status.
Treat the analog line interface as a potentially noisy environment and keep the SLIC, codec, clocking, and host-control sections appropriately partitioned. Follow the manufacturer reference layout for grounding and decoupling, and keep external line-protection paths away from sensitive signal nodes. EMI and ringing-performance testing should be performed at the intended line voltage, current, and cable length because the supplied snippets do not provide detailed conducted-emissions limits.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified snippets mention RoHS in generic comparison-table contexts but do not provide a definitive compliance statement for SI3210-KT. AEC-Q100 is treated as not applicable because this is a telecom interface IC rather than an automotive-qualified device.
