SI3215M-BT - 3.3V Single-Channel ProSLIC | Silicon Labs
MPN: SI3215M-BT ✓ NakahandaSI3215M-BT Ulas
A ProSLIC is a programmable integrated circuit that places a telephone-line interface into the analog domain. In the broader hierarchy, it belongs to interface ICs, then telecommunications interface silicon, then customer premise equipment and voice-access semiconductors. Unlike a simple codec, the SI3215M integrates line-driving, ring-voltage generation, battery-voltage generation, voice processing, and programmable telephone-line control. This consolidation reduces the number of external line-interface functions required in voice terminal equipment.
The SI3215M-BT provides one integrated SLIC channel in an industrial-temperature option. It uses a 3.3 V supply, supports programmable CMOS telephone-interface operation, and includes ringing and battery-voltage-generation functions. Its 38-pin gull-wing TSSOP package is intended for surface-mount PCB assembly. The package provides 38 terminations for the mixed-signal, control, supply, and line-interface functions defined by the device pin description.
The integrated battery supply adapts its output voltage to reduce power consumption, allowing the system to operate from the single 3.3 V rail identified for the SI3215M variant. The ringing generator supports the telephone line through the external linefeed path. This division of responsibility allows the SI3215M-BT to control line voltage while the Si3201 or discrete components carry the line current and isolate the low-voltage codec circuitry from the analog line.
Typical uses include analog telephone adapters, voice-over-IP terminals, customer premise equipment, analog fax equipment, and voice-access gateways. In these applications, the device handles the analog line interface and voice-signal conversion while a host processor controls programmable operating parameters. The single-channel architecture is particularly appropriate for one-line terminals rather than multi-line systems requiring parallel channel expansion.
PCB implementation must preserve separation between the low-voltage digital and analog circuitry and the telephone-line network. Decoupling should be placed close to the supply pins, while linefeed and protection components should follow the reference circuit in the manufacturer datasheet. Component values associated with the ring generator, battery supply, and external linefeed network should not be changed without reviewing the recommended operating limits.
This product page combines the exact SI3215M-BT package and supply information with practical interface-IC design guidance, application context, package hierarchy, and drop-in family comparisons. It also identifies which detailed electrical limits and pin assignments should be confirmed in the manufacturer datasheet before schematic release or PCB layout approval.
Mga alternatibo na pwedeng ilagay na SI3215M-BT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
SI3215M-GT
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI3215M-KT
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI3215M-BT Mga Spesipikasyon
| Product Type | Programmable CMOS SLIC/Codec |
| Interface Function | 1 integrated telephone-line channel |
| Volte ng Pagbibigay | 3.3 V |
| Number of Channels | 1 channel |
| Ringing Generation | Supported |
| Battery Voltage Generation | Supported |
| Linefeed Control Method | Si3201 linefeed interface chip or discrete linefeed |
| Integrated Battery Supply | Continuously adapts output voltage |
| Temperature Grade | Industrial |
| Packhaging | 38-pin TSSOP |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng SI3215M-BT rectangular
Pin configuration para sa SI3215M-BT (rectangular package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SI3215M-BT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SI3215M-BT ay nararapat para sa 6 aplikasyons: Analog Telephone Adapter, Voice-over-IP Terminal, Customer Premises Equipment, Analog Fax Terminal, One-Line Voice Gateway, Industrial Voice Terminal.
Analog Telephone Adapter
The SI3215M-BT fits a single-line analog telephone adapter because it combines one ProSLIC channel, voice-codec operation, ringing generation, and battery-voltage generation in one 3.3 V device. The host processor can control the programmable telephone interface while the external Si3201 or discrete linefeed connects it to the line. Using the integrated battery supply avoids a separate fixed battery rail and lets the output adapt for lower power consumption. The design still requires the protection and linefeed network specified by the manufacturer reference circuit.
Inirekomenda
Voice-over-IP Terminal
A voice-over-IP terminal can use the SI3215M-BT as the analog line-facing codec and SLIC while a network processor handles packetized voice and control. The one-channel architecture matches a single analog port, and the 3.3 V supply permits operation from a compact system rail. Ring and hook-state functions are integrated into the ProSLIC, while line current and telephone-network isolation are handled externally. This partition reduces the number of separate low-voltage interface functions while retaining the required ringing and battery behavior.
Inirekomenda
Customer Premises Equipment
The SI3215M-BT is designed for customer premises equipment that connects a voice service to a local telephone network. Its programmable CMOS SLIC/codec architecture consolidates voice conversion, line signaling, ringing generation, and battery-voltage generation into one 38-pin TSSOP device. A Si3201 linefeed interface chip provides a dedicated line-current path, while a discrete linefeed remains an option when board topology permits. The 3.3 V-only operation simplifies power planning for compact CPE designs.
Inirekomenda
Analog Fax Terminal
The SI3215M-BT can support the analog line interface of a single-line fax terminal that requires telephone-network ring detection, hook control, and voice-channel signaling. Its integrated ProSLIC functions replace several discrete low-voltage interface blocks, while the external linefeed protects the codec circuitry and establishes the line-current path. The 3.3 V supply and 38-pin TSSOP package are appropriate for compact surface-mount equipment. Firmware and register configuration should be validated against the complete terminal reference design.
Inirekomenda
One-Line Voice Gateway
In a one-line voice gateway, the SI3215M-BT provides the customer-facing analog interface while another processor or digital interface handles routing and packetization. Its single SLIC channel matches the one-port architecture, and its integrated ring and battery functions reduce external circuitry. The device operates from 3.3 V and communicates through a dedicated linefeed path. Designers should reserve filtering and protection around the analog line pins and keep switching or high-current circuitry away from sensitive signal routing.
Inirekomenda
Industrial Voice Terminal
The SI3215M-BT’s industrial temperature grade makes it a candidate for a single-line industrial voice terminal operating from a 3.3 V system rail. The device integrates one programmable SLIC/codec channel, ringing, and battery-voltage generation, reducing the component count beside the linefeed interface. Its gull-wing 38-pin TSSOP package is inspectable during manufacturing and compatible with conventional surface-mount assembly. Final temperature limits, humidity exposure, and isolation requirements should be verified for the target enclosure and telephone-network environment.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SI3215M-BT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SI3215M-GT | SI3215M-KT |
|---|---|---|---|
| Package | 38-pin TSSOP | 38-pin TSSOP | 38-pin TSSOP |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Product Type | Programmable CMOS SLIC/Codec | Programmable CMOS SLIC/Codec | Programmable CMOS SLIC/Codec |
| Number of Channels | 1 channel | 1 channel | 1 channel |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Ringing Generation | Supported | Supported | Supported |
| Battery Voltage Generation | Supported | Supported | Supported |
| Linefeed Arrangement | Si3201 linefeed interface chip or discrete linefeed | Si3201 linefeed interface chip or discrete linefeed | Si3201 linefeed interface chip or discrete linefeed |
| Terminal Form | Gull wing | Gull wing | Gull wing |
Pangunahing mga Pagkakaiba
- Single-chip integration of line interface, codec, ringing, and battery functions (kumpara saSI3215M-GT)
- Single 3.3 V system supply for the SI3215M variant (kumpara saSI3215M-KT)
- Programmable single-line interface with dedicated external linefeed options (kumpara saSI3215M-GT)
Talaan ng Disenyo
Implement the telephone-line interface on a controlled analog area of the PCB and keep it physically separated from switching nodes, high-current return paths, and digital clocking circuitry. Place the SI3215M-BT decoupling capacitors close to their associated supply and ground pins, and route the linefeed connections away from sensitive control signals. The 38-pin gull-wing TSSOP provides accessible leads, but short loops remain important around the mixed-signal device.
Design the power system around the SI3215M-BT’s 3.3 V operating supply and the manufacturer’s recommended decoupling and battery-supply configuration. The integrated battery supply adapts its output to minimize power, so the external supply should not be assumed to duplicate a fixed battery rail directly. Check startup, ring-voltage generation, and load transitions against the electrical limits in the manufacturer datasheet before selecting supply capacity.
Do not substitute an SI3215M family member solely because it uses the same 38-pin TSSOP package. Verify the ordering-code meaning, temperature grade, electrical limits, pin assignments, and linefeed compatibility for every board revision. A family-level comparison reports that circuit details can differ, making pin-by-pin and ordering-information review essential before approving a replacement.
Follow the manufacturer’s reference layout for the codec, ring-generator, battery-supply, and external linefeed connections. Keep analog routing short and continuous, provide a low-impedance return for supply and ground currents, and place protection components where they can divert line transients without forcing current through sensitive device pins. Validate ringing and hook-state behavior with the intended external linefeed network rather than relying on bench behavior with an incomplete telephone-line simulation.
Impormasyon ng Pagsunod sa Kautusan
The SI3215M-BT is identified as an industrial-temperature-grade part, but industrial temperature grading does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation through current manufacturer documentation.