SN65HVD33D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
MPN: SN65HVD33D ✓ NakahandaSN65HVD33D Ulas
An RS-485 transceiver is an interface IC that combines a differential line driver, differential receiver, and electrical protection for bidirectional data buses. It belongs to the RS-422 and RS-485 transceiver family within the broader interface-IC and semiconductor hierarchy. Full-duplex operation uses separate transmit and receive paths, allowing a node to transmit and receive simultaneously without sharing the same differential pair.
Key features include one driver and one receiver in an 8-pin package, 3.3 V operation, one-eighth unit loading, support for as many as 256 nodes on a bus, and fault protection from -9 V to +14 V. The bus pins include ESD protection exceeding 15 kV HBM. A 1 Mbit/s option provides slower driver edges to reduce ringing and electromagnetic interference on longer or imperfectly terminated interconnects.
The SN65HVD33D uses differential signaling to reject common-mode noise and support reliable communication over cable distances where single-ended logic would be more susceptible to interference. Independent receiver and driver enable controls support point-to-point links, multidrop buses, industrial equipment, and systems that require controlled direction changes. The 8-pin SOIC package allows straightforward surface-mount assembly and compatibility with standard small-outline PCB land patterns.
Typical applications include industrial RS-485 links, building automation equipment, instrumentation, motor-control systems, factory communication networks, and data acquisition systems. Designers should account for the difference between the normal 26 Mbit/s signaling capability and the optional slow-edge behavior intended for 1 Mbit/s buses.
Use the manufacturer pin-description table when assigning PCB tracks, and preserve the exposed spacing required by the SOIC footprint. Input and output filtering, bus termination, protection grounding, and enable sequencing should be validated against the actual cable length, topology, data rate, and grounding arrangement.
This page combines manufacturer specifications, drop-in replacement guidance, comparative engineering information, and practical interface-design notes. It helps engineers evaluate the SN65HVD33D against electrically similar devices while keeping the same-package and pin-compatibility requirements in view.
Mga alternatibo na pwedeng ilagay na SN65HVD33D — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
SN65HVD32D
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →THVD1500D
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SN65HVD30D
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →SN65HVD33D Mga Spesipikasyon
| Device Type | 1/1 full-duplex RS-422/RS-485 transceiver |
| Volte ng Pagbibigay | 3.3 V |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Unit Load | 1/8 unit load |
| Maximum Bus Nodes | 256 nodes |
| Maximum Signaling Rate | 26 Mbit/s |
| Controlled Transition-Time Signaling Rate | 1 Mbit/s |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM |
| Fault Protection Range | -9 V to +14 V |
| Temperature na Operasyon | -55 C to +125 C |
| Packhaging | SOIC-8, MS-012AA |
| Bilang ng Pin | 8 pins |
| Uri ng Pagpapasok | Surface mount |
| Enable Functions | Driver and receiver enables |
| Supported Standards | RS-422 and RS-485 |
Gabay sa Pin Configuration ng SN65HVD33D soic-8, ms-012aa
Pin configuration para sa SN65HVD33D (soic-8, ms-012aa package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SN65HVD33D.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SN65HVD33D ay nararapat para sa 6 aplikasyons: Industrial RS-485 Equipment, Factory Automation Networks, Building Automation, Data Acquisition Systems, Motor and Power-Control Communication, Instrumentation and Test Equipment.
Industrial RS-485 Equipment
The SN65HVD33D fits industrial RS-485 equipment requiring a 3.3 V interface with high node density and extended-temperature operation. Its one-eighth unit load supports as many as 256 nodes, while the -55 C to +125 C rating covers harsh enclosure environments. The separate full-duplex driver and receiver paths support simultaneous data collection and control. At 26 Mbit/s, keep cable length and topology within the manufacturer’s recommended limits; use the controlled-edge option for 1 Mbit/s networks where slower transitions reduce ringing and EMI.
Inirekomenda
Factory Automation Networks
The SN65HVD33D is appropriate for factory automation nodes that need reliable differential communication on a 3.3 V logic rail. The one-eighth unit load allows more equipment to share a multidrop bus, while the 26 Mbit/s signaling capability supports short, high-speed links between controllers and peripheral modules. For long factory cables, use the 1 Mbit/s transition-time option to reduce edge ringing and EMI. Isolation and surge protection should be added where the bus crosses buildings, motor systems, or high-energy industrial equipment.
Inirekomenda
Building Automation
The SN65HVD33D supports building automation controllers that distribute sensor, actuator, and configuration data over a 3.3 V RS-485 network. A one-eighth unit load permits a higher device count than one-unit transceivers, and the extended -55 C to +125 C range helps with equipment placed in unconditioned spaces. The full-duplex architecture can support continuous monitoring when separate transmit and receive pairs are available. Otherwise, the independent enable controls help manage bus direction, while the controlled-edge mode can improve compatibility with slower field wiring.
Inirekomenda
Data Acquisition Systems
The SN65HVD33D is well suited to compact data-acquisition modules that aggregate measurements from multiple remote sensors. Differential signaling improves noise immunity in industrial environments, while the one-eighth unit load supports up to 256 nodes according to the manufacturer datasheet. The 26 Mbit/s maximum rate handles high-throughput acquisition over short links, and the slower 1 Mbit/s option supports longer cables with reduced ringing. The 8-pin SOIC package keeps the interface compact, although an exposed-pad arrangement should be considered where system density or thermal dissipation is critical.
Inirekomenda
Motor and Power-Control Communication
The SN65HVD33D can connect a 3.3 V controller to motor-drive equipment over a differential RS-485 command and feedback link. Its 26 Mbit/s capability supports fast command traffic over short cables, while the selectable 1 Mbit/s edge rate helps control ringing in longer installations. The -55 C to +125 C operating range suits equipment exposed to temperature variation. Because motor environments contain switching noise and ground transients, isolate the interface when required, terminate the bus correctly, and protect both connector and cable entries.
Inirekomenda
Instrumentation and Test Equipment
The SN65HVD33D supports compact instrumentation that must exchange commands and measurement data with remote test fixtures. Its full-duplex architecture enables simultaneous control and response when separate differential pairs are used, and the 3.3 V supply suits modern mixed-signal systems. One-eighth unit loading permits numerous low-power fixtures on the same bus, but high-speed operation requires short, controlled interconnects. For longer leads, select the controlled transition-time mode for 1 Mbit/s signaling to limit ringing and reduce EMI around sensitive measurement circuits.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SN65HVD33D — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SN65HVD32D | THVD1500D | SN65HVD30D |
|---|---|---|---|---|
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
Pangunahing mga Pagkakaiba
- High node count in an 8-pin interface (kumpara saSN65HVD30D)
- Higher maximum signaling capability (kumpara saTHVD1500D)
- Full-duplex node architecture (kumpara saSN65HVD32D)
Talaan ng Disenyo
Treat cable length, topology, and data rate as one signal-integrity design. The SN65HVD33D can signal at up to 26 Mbit/s, but its optional controlled-edge mode targets 1 Mbit/s signaling. For longer or poorly terminated runs, use the slower-edge configuration, maintain the recommended termination network, and avoid introducing unnecessary stubs so ringing and differential-mode voltage are minimized.
Keep the transceiver, protection components, and connector path in a compact, controlled high-speed layout. Route the differential pair as a closely coupled pair with continuous reference planes, minimize stub lengths, and keep bus-side protection components close to the connector. Confirm that ground and return paths support the common-mode and fault conditions expected in the installation.
Do not assume that the 26 Mbit/s headline rate is suitable for every cable. Bus length, node spacing, termination, transceiver enable timing, and grounding determine practical performance. Use the manufacturer pin-description table for enable polarity and logic levels, and verify the final design at the intended baud rate with representative cable and loading conditions.
For industrial or motor-control systems, consider the controlled 1 Mbit/s transition-time option when edge energy could couple into nearby circuitry. Add isolation or surge protection when the bus leaves the enclosure or crosses an equipment boundary. The internal ESD rating improves robustness but does not replace external protection for severe lightning or industrial surge events.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer product page and search extracts do not state specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.
