SP3232EBEY-L/TR - Dual RS-232 Transceiver | MaxLinear
MPN: SP3232EBEY-L/TR ✓ NakahandaSP3232EBEY-L/TR Ulas
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and receives RS-232 signals for conversion into logic-level inputs. In the product hierarchy, the SP3232EBEY-L/TR belongs to the RS-232 transceiver family, interface IC category, and broader semiconductor and communication-interface ecosystem. It is intended for portable and handheld equipment, including notebook computers and other systems that need bidirectional asynchronous serial communication.
The device combines two transmit channels and two receive channels in one package. Its +3.0 V to +5.5 V supply range accommodates both 3.3 V and 5 V system rails. The 0.1 µF charge-pump capacitor requirement in 3.3 V operation supports compact board layouts, while integrated level translation reduces the number of external interface components required for a basic RS-232 port.
The charge-pump topology generates positive and negative signal levels from a single positive supply. This is important because RS-232 uses voltage levels relative to ground to distinguish mark, space, and invalid states. The SP3232EBEY-L/TR also provides integrated driver and receiver functions, allowing two ports or two directions of communication to be implemented with one interface IC.
Typical applications include portable computers, handheld test equipment, industrial control links, USB-to-RS-232 adapters, embedded serial consoles, and service interfaces. For embedded systems, the transceiver can connect a host UART to an external RS-232 connector. The host controller supplies logic-level transmit and receive signals, while the transceiver handles the physical voltage conversion and signal buffering.
When designing the circuit, follow the charge-pump capacitor connection and placement requirements in the manufacturer datasheet. Keep the interface connector and transceiver placement practical for the intended cable length, provide the required bypass and charge-pump capacitance, and account for the electrical characteristics of the connected RS-232 port. A software-controlled power-down feature may also require careful interface-state handling.
This product page combines package details, verified interface specifications, cross-reference findings, and practical implementation guidance. It also identifies the differences that matter when comparing the SP3232EBEY-L/TR with same-family and cross-brand RS-232 transceivers, helping engineers narrow the choice before updating a PCB or constructing a new serial interface.
Mga alternatibo na pwedeng ilagay na SP3232EBEY-L/TR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok SP3232EBEY-L/TR (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, Package.
SP3232ECY-L/TR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ST3232EBTR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SP3232EBEY-L/TR Mga Spesipikasyon
| Product Type | RS-232 transceiver |
| Driver Count | 2 drivers |
| Receiver Count | 2 receivers |
| Supply Voltage Range | +3.0 V to +5.5 V |
| Interface Standard | RS-232 |
| Packhaging | 16-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
| Charge-Pump Capacitor at 3.3 V | 0.1 µF |
| Number of Transmit Channels | 2 channels |
| Number of Receive Channels | 2 channels |
| Power Supply Topology | Single positive supply with integrated charge pump |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
Gabay sa Pin Configuration ng SP3232EBEY-L/TR 16-pin tssop
Pin configuration para sa SP3232EBEY-L/TR (16-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SP3232EBEY-L/TR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SP3232EBEY-L/TR ay nararapat para sa 6 aplikasyons: Portable Computer Serial Port, USB-to-RS-232 Adapter, Embedded Industrial Controller, Portable Test and Measurement Instrument, Service and Configuration Interface, Two-Port RS-232 Communication Hub.
Portable Computer Serial Port
The SP3232EBEY-L/TR fits portable computers and similar handheld equipment because it combines two drivers and two receivers in a 16-pin TSSOP package and operates from a single +3.0 V to +5.5 V source. At 3.3 V, its charge-pump supply requires only 0.1 µF capacitors according to the MaxLinear manufacturer datasheet, helping conserve board area. The resulting circuit can convert a host UART into RS-232 levels without a separate negative supply. Designers should follow the datasheet capacitor placement and decoupling recommendations, particularly near the charge-pump and supply pins.
Inirekomenda
USB-to-RS-232 Adapter
A USB-to-RS-232 adapter can use the SP3232EBEY-L/TR at the connector side of the interface. Its two transmitters and two receivers support bidirectional serial communication, while the integrated charge pump supplies the RS-232 voltage relationship from one +3.0 V to +5.5 V rail. The 16-pin TSSOP package is suitable for a compact adapter PCB, and the 0.1 µF charge-pump capacitance specified for 3.3 V operation reduces external capacitor burden. Layout should keep the charge-pump loop compact and route the connector-side nets away from sensitive digital circuitry.
Inirekomenda
Embedded Industrial Controller
The SP3232EBEY-L/TR is suitable for adding an RS-232 service or communications port to an embedded industrial controller. Its +3.0 V to +5.5 V operating range allows it to share either a 3.3 V or 5 V controller rail, while two receivers can monitor two incoming lines and two drivers can service two outgoing lines. Its single-supply charge-pump design avoids a separate negative rail. For factory equipment, verify the complete electrical limits, isolation requirements, surge conditions, and connector-ground strategy before releasing the production design.
Inirekomenda
Portable Test and Measurement Instrument
Handheld test instruments can use the SP3232EBEY-L/TR to provide a compact RS-232 control or data port. The device's 16-pin TSSOP footprint and single +3.0 V to +5.5 V operation are suitable for battery-powered electronics, while the charge pump generates the required bipolar RS-232 levels without adding a negative supply. The 0.1 µF capacitor requirement in 3.3 V operation supports a compact implementation. Designers should consider cable length, grounding, ESD protection, and the inactivity or shutdown behavior required by the instrument firmware.
Inirekomenda
Service and Configuration Interface
The SP3232EBEY-L/TR can implement a service connector that lets an operator configure or inspect an embedded system through a laptop or service tool. Two transmitters and two receivers provide flexible line allocation, while operation from a single 3.3 V or 5 V source simplifies interface power. The integrated charge pump avoids a discrete negative-voltage circuit, which can reduce PCB area and assembly complexity. Place the transceiver near the connector when practical, maintain a continuous ground reference, and apply the connector protection appropriate to the installation environment.
Inirekomenda
Two-Port RS-232 Communication Hub
Two bidirectional RS-232 links can be consolidated around the SP3232EBEY-L/TR because the device contains two drivers and two receivers. This arrangement suits equipment that must exchange commands with one peripheral while monitoring a second device. The single +3.0 V to +5.5 V supply range supports common embedded rails, and the 16-pin TSSOP package keeps the interface compact. Engineers must assign the drivers and receivers according to the manufacturer pinout and account for line loading, idle states, and any requirements to hold outputs in a defined condition during reset.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SP3232EBEY-L/TR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SP3232ECY-L/TR | ST3232EBTR |
|---|---|---|---|
| Brand | MaxLinear | MaxLinear | STMicroelectronics |
| Package | 16-TSSOP | 16-TSSOP - same | 16-TSSOP - same |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
Pangunahing mga Pagkakaiba
- Single-supply true RS-232 operation (kumpara saST3232EBTR)
- Dual full-duplex channel capacity (kumpara saSP3232ECY-L/TR)
- Pin-compatible cross-brand sourcing option (kumpara saST3232EBTR)
Talaan ng Disenyo
Place the charge-pump capacitors and supply bypass capacitors exactly as shown in the MaxLinear SP3222E/SP3232E manufacturer datasheet. The 0.1 µF charge-pump capacitance applies to 3.3 V operation, and capacitor values for other supply conditions should be taken from the device documentation. Keep the charge-pump loop short, connect the bypass capacitor close to the supply pin, and avoid routing switching-current paths beneath the connector-side receive traces.
Assign the two drivers and two receivers by following the manufacturer pin-description table rather than relying on package position alone. Route RS-232 connector traces away from clocks, ADC inputs, and other high-impedance analog nodes. Use a continuous interface ground reference where the application permits, and keep external protection components close to the connector so surge current is diverted before entering the IC.
Do not treat logic-level UART signals as RS-232 line signals; the SP3232EBEY-L/TR performs the required level conversion. Check the charge-pump capacitor value against the actual supply voltage, confirm that software or external pull-downs do not conflict with the intended driver states, and review the shutdown truth table before using power saving in a service port. Confirm connector gender and signal names at the assembly level.
Impormasyon ng Pagsunod sa Kautusan
The interface IC is not presented as an AEC-Q100-qualified automotive device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or current product documentation.