STMicroelectronics

STM32F302ZET6 - 72MHz Cortex-M4 MCU, 512KB Flash | ST

MPN: STM32F302ZET6 ✓ Nakahanda
2.5 V and 3.3 V Vdss 144-pin LQFP (20 x 20 mm) Package 72 MHz Speed 512 KB Memory
MOQ: 1 |

STM32F302ZET6 Ulas

The STMicroelectronics STM32F302ZET6 is a 32-bit ARM Cortex-M4 microcontroller with an FPU, operating at up to 72 MHz and integrating 512 KB of Flash memory in a 144-pin LQFP package measuring 20 x 20 mm. It is designed for embedded applications that require efficient real-time control, mixed-signal processing, and a broad selection of serial and analog peripherals.

A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The STM32F302xD/E family belongs to the ARM Cortex-M4 microcontroller hierarchy, combining RISC-style embedded processing with floating-point capability, on-chip Flash, SRAM, communication interfaces, timers, analog conversion, and GPIO. Its position between simple 8-bit controllers and higher-end application processors makes it suitable for industrial controls, motor systems, communications equipment, and compact embedded products.

The STM32F302ZET6's primary headline specifications are its 72 MHz maximum operating frequency, 512 KB of Flash, and 144-LQFP package. The manufacturer describes the family around a high-performance ARM Cortex-M4 core with FPU. Its 2.5 V and 3.3 V operating references make it appropriate for conventional embedded equipment where modern MCU development tools and peripheral-rich mixed-signal designs are required. The large LQFP package also provides extensive external pin access compared with smaller leadless packages.

The STM32F302xD/E family combines a 72 MHz Cortex-M4 processor with significant Flash capacity for firmware, configuration data, and application code. The FPU supports efficient single-precision floating-point calculations in control loops and signal-processing workloads. Exact SRAM capacity, peripheral configurations, GPIO count, current consumption, temperature limits, and package dimensions beyond the stated 20 x 20 mm body should be confirmed in the manufacturer datasheet and pin-description tables before release.

Typical uses include industrial automation modules, sensor acquisition and control, CAN-based equipment, motor-control peripherals, communications gateways, and compact embedded platforms. The 512 KB Flash capacity allows more application firmware to remain resident than in many entry-level STM32 devices, while the 72 MHz core provides useful timing margin for protocol handling, control logic, and supervisory tasks.

PCB design should follow the manufacturer's LQFP-144 land pattern, power, decoupling, clock, and analog-layout recommendations. Confirm the complete pin map, alternate-function assignments, exposed programming and debug interfaces, and unused-pin requirements before schematic capture. For production programs, use the supported ST development toolchain and validate startup, clock configuration, peripheral initialization, and firmware update behavior on the final board.

This product page consolidates the confirmed core, frequency, memory, package, and sourcing details with practical selection guidance, pin-validation cautions, and same-family LQFP-144 upgrade options. It also identifies the specification gaps that must still be resolved from the manufacturer datasheet, helping engineers distinguish confirmed device facts from design assumptions.

Mga alternatibo na pwedeng ilagay na STM32F302ZET6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

STM32F302ZGT6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 144-LQFP (20 x 20 mm)
Flash increases from 512 KB to 1 MB, a 100% increase; CPU frequency remains 72 MHz and the package remains 144-LQFP

📋 Alternatibo na Reference (hindi sa katalogo)

STM32F302ZET7

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 144-LQFP (20 x 20 mm)
Core frequency remains 72 MHz and Flash remains 512 KB; the principal difference is the ordering temperature grade

📋 Alternatibo na Reference (hindi sa katalogo)

STM32F302ZET8

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 144-LQFP (20 x 20 mm)
Core frequency remains 72 MHz and Flash remains 512 KB; the principal difference is the ordering temperature grade

📋 Alternatibo na Reference (hindi sa katalogo)

STM32F302ZET6 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M4 microcontroller
Maximum CPU Frequency 72 MHz
Processor Core ARM Cortex-M4 with FPU
Instruction Set 32-bit RISC
Flash Memory 512 KB
Flash Organization 512K x 8 bits
Packhaging 144-pin LQFP (20 x 20 mm)
Uri ng Pagpapasok Surface mount
Supply References 2.5 V and 3.3 V
Architecture ARM Cortex-M4 32-bit RISC
Device Family STM32F302xD/E
Product Series STM32F3
Floating-Point Support Single-precision FPU
Tindminan RoHS unknown
REACH Status unknown

Gabay sa Pin Configuration ng STM32F302ZET6 144-pin lqfp (20 x 20 mm)

Pin configuration para sa STM32F302ZET6 (144-pin lqfp (20 x 20 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 144-pin lqfp (20 x 20 mm) package para sa STM32F302ZET6

Wala ng detalyadong pinout data na magagamit para sa STM32F302ZET6.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

STM32F302ZET6 ay nararapat para sa 6 aplikasyons: Industrial Automation Controller, Motor Control and Power Conversion, CAN-Based Sensor Gateway, Industrial Data Acquisition System, Communications Equipment, Test and Measurement Instrument.

🏭

Industrial Automation Controller

The STM32F302ZET6 fits industrial automation modules that combine real-time control with a broad external interface count. Its 72 MHz ARM Cortex-M4 core and hardware FPU provide useful computational margin for control loops, state-machine logic, filtering, and communications, while 512 KB of Flash supports application firmware, configuration data, diagnostics, and update logic. The 144-pin LQFP exposes substantially more I/O than a compact leadless MCU, making it practical for drivers, input modules, analog interfaces, and field-bus connectivity. A production design must verify the final temperature grade, EMC margins, isolation requirements, and every alternate-function assignment against the manufacturer pin and electrical tables.

⚡

Motor Control and Power Conversion

The STM32F302ZET6 is appropriate for supervisory and digital control around motor-drive, power-conversion, and solenoid systems. The 72 MHz Cortex-M4 core can execute timing-sensitive PWM configuration, current and position processing, fault handling, and communications, while its FPU improves floating-point control calculations without requiring a separate accelerator. The 512 KB Flash budget is useful for retaining tuning parameters and protection logic. Designers should allocate pins carefully for timer channels, encoder or sensor inputs, and external gate drivers, then confirm analog and timer trigger assignments directly from the STM32F302xD/E datasheet.

🌐

CAN-Based Sensor Gateway

The STM32F302ZET6 can serve as the central processor in a CAN-connected sensor gateway that aggregates measurements and forwards them to a higher-level controller. Its 72 MHz core provides sufficient timing margin for protocol handling, filtering, diagnostics, and data preparation, while 512 KB of Flash accommodates protocol stacks and application logic. The large LQFP-144 package makes it easier to expose several serial interfaces, analog inputs, and discrete I/O without an external I/O expander. Final design work should confirm the exact CAN and UART resources, pin multiplexing, transceiver requirements, and operating temperature constraints before PCB release.

📊

Industrial Data Acquisition System

The STM32F302ZET6 supports multichannel data-acquisition designs where sampled values must be conditioned, filtered, timestamped, and transferred. Its 72 MHz Cortex-M4 core and FPU are useful for fixed-point or floating-point filtering, while 512 KB of Flash provides room for calibration tables, acquisition software, and communication protocols. The 144-pin LQFP offers more I/O than smaller MCU packages and remains straightforward to inspect during prototype rework. Engineers must verify ADC characteristics, trigger mapping, reference voltage, input impedance, and the exact peripheral assignments in the manufacturer documentation before fixing the analog front end.

📡

Communications Equipment

The STM32F302ZET6 is suited to embedded communications equipment that needs protocol processing, supervisory firmware, and multiple external interfaces in one device. The 72 MHz Cortex-M4 core can handle framing, routing, buffering, and real-time supervision, while the FPU supports signal-processing routines when required. Its 512 KB Flash capacity is useful for stacked firmware and configuration, and the 144-pin LQFP provides access to numerous serial and control signals. Designers should confirm the desired USART, SPI, USB, CAN, and Ethernet-related hardware in the specific device datasheet before selecting external transceivers or connectors.

🔧

Test and Measurement Instrument

The STM32F302ZET6 can serve as the control processor in a compact test or measurement instrument that coordinates analog inputs, displays, communications, and calibration storage. The 72 MHz Cortex-M4 core supports responsive measurement sequencing, filtering, calibration, and command processing, while 512 KB of Flash can hold firmware, lookup tables, and instrument configuration. Its extensive LQFP-144 I/O simplifies access to external ADCs, sensors, relays, and display interfaces. For laboratory-grade accuracy, separate analog and digital sections carefully, follow grounding recommendations, and verify ADC, reference, timing, and temperature specifications for the selected ordering code.

Buod ng mga Inirekomendang Produkto

STM32F302ZET6 STMicroelectronics Ginagamit sa: Industrial Automation Controller, Motor Control and Power Conversion, CAN-Based Sensor Gateway, Industrial Data Acquisition System, Communications Equipment, Test and Measurement Instrument STM32F302ZGT6 Same-family option with increased Flash Ginagamit sa: Industrial Automation Controller, Industrial Data Acquisition System, Test and Measurement Instrument STM32F302ZET7 Extended-temperature family option Ginagamit sa: Motor Control and Power Conversion, Communications Equipment STM32F302ZET8 Same-package temperature-grade option Ginagamit sa: CAN-Based Sensor Gateway
What is the STM32F302ZET6?
The STM32F302ZET6 is a 32-bit ARM Cortex-M4 microcontroller from STMicroelectronics, operating up to 72 MHz with an FPU and 512 KB of Flash in a 144-pin LQFP package. According to the manufacturer's STM32F302xD/E family description, it combines high-performance RISC processing with extensive mixed-signal and connectivity resources. It is intended for embedded control, industrial automation, communications, and sensor-processing systems that require more processing capacity and external I/O than entry-level MCUs.
What are the key specifications of STM32F302ZET6 that engineers should know?
The STM32F302ZET6 combines a 72 MHz ARM Cortex-M4 core, single-precision FPU, 512 KB of Flash, and a 144-pin LQFP package measuring 20 x 20 mm. STMicroelectronics identifies the device as part of the STM32F302xD/E family and describes a high-performance 32-bit RISC architecture. The listed supply references are 2.5 V and 3.3 V. Use the manufacturer datasheet for the exact SRAM size, GPIO allocation, converter specifications, and complete electrical limits.
Where can I download the STM32F302ZET6 datasheet?
The official STM32F302ZE product page is the appropriate starting point for the STM32F302ZET6 datasheet and technical documentation. It links to the STM32F302xD/E family material, including electrical characteristics, package information, memory maps, and peripheral descriptions. The product appears in a 144-pin LQFP configuration, so use the LQFP-144 mechanical drawing and pin table when assigning PCB land patterns and signal names.
Where can I find the STM32F302ZET6 pinout?
The STM32F302ZET6 pinout is defined in the manufacturer datasheet's pin-description and package-outline sections for the 144-pin LQFP variant. Use that table for every GPIO, power, ground, clock, reset, programming, debug, and peripheral signal. Do not infer alternate functions from a smaller STM32 package because the 144-pin LQFP exposes substantially more I/O and multiplexed peripheral connections than leadless or 48-pin variants.
What is the STM32F302ZET6 CPU frequency?
The STM32F302ZET6 operates at up to 72 MHz. STMicroelectronics describes the STM32F302xD/E family as using a high-performance ARM Cortex-M4 32-bit RISC core with an FPU at that frequency. The headroom is useful for time-critical control, communication protocol handling, and signal-processing loops, although actual application performance also depends on peripheral clock configuration, memory latency behavior, firmware architecture, and external components.
How much Flash memory does the STM32F302ZET6 have?
The STM32F302ZET6 contains 512 KB, organized as 512K x 8 bits, of Flash memory. Distributor technical listings and the manufacturer family description confirm the 512 KB figure and 72 MHz operating frequency. This capacity allows application firmware, parameter data, and boot or update logic to reside on-chip. The exact SRAM capacity and memory map should be taken from the manufacturer datasheet rather than inferred from Flash size.
Is the STM32F302ZET6 suitable for industrial control applications?
The STM32F302ZET6 is suitable for many industrial control designs because it provides a 72 MHz Cortex-M4 core, hardware FPU, 512 KB of Flash, and extensive I/O in the 144-pin LQFP package. These resources support real-time supervisory logic, communications, data acquisition, and control functions. Final suitability depends on the device's specified temperature range, EMC requirements, isolation strategy, peripheral coverage, and the industrial certification obligations of the finished equipment.
What is the difference between STM32F302ZET6 and STM32F302ZGT6?
The STM32F302ZET6 has 512 KB of Flash, while the STM32F302ZGT6 provides 1 MB of Flash, adding 512 KB or 100% more code and data storage. Both use the 144-pin LQFP configuration and are members of the STM32F302 family. The ZGT6 can therefore reuse the same family-oriented board architecture when its larger Flash option is useful, but firmware size, boot configuration, and all electrical details still require validation before substitution.
Can STM32F302ZGT6 replace STM32F302ZET6 in an existing design?
The STM32F302ZGT6 is a same-family, same-package upgrade that increases Flash from 512 KB to 1 MB while retaining the STM32F302 product line and 72 MHz Cortex-M4 platform. That makes it a practical candidate when existing firmware or planned features exceed 512 KB. Before treating it as a drop-in replacement, verify the complete LQFP-144 pin table, power requirements, boot settings, clock configuration, peripheral assignments, and any package-specific differences.
When should I choose STM32F302ZET6 instead of a smaller STM32 MCU?
Choose the STM32F302ZET6 when a design needs the combination of a 72 MHz Cortex-M4 core, 512 KB of Flash, an FPU, and extensive 144-pin I/O availability. Smaller STM32 devices can be preferable when board area, power, and cost dominate, but they may offer fewer pins, less memory, or lower processing capacity. The LQFP package also improves inspectability and reworkability compared with many leadless MCU packages.
What is the best drop-in replacement for STM32F302ZET6?
The closest supported upgrade is the STM32F302ZGT6, which retains the STM32F302 family and 144-pin LQFP package while increasing Flash from 512 KB to 1 MB. It offers additional code and data capacity without changing the nominal 72 MHz Cortex-M4 architecture. Exact drop-in status still depends on the complete pin map, electrical characteristics, boot configuration, and firmware assumptions, so prototype and validate the substitution before production release.
Is STM32F302ZET6 the same as STM32F302ZET7?
The STM32F302ZET6 and STM32F302ZET7 share the STM32F302 family, Cortex-M4 architecture, 72 MHz speed, 512 KB Flash configuration, and 144-pin LQFP package, but their ordering temperature grades differ. The STM32F302ZET7 is normally selected for a wider industrial temperature range, while the STM32F302ZET6 addresses the standard commercial/industrial range. Verify the exact suffix temperature grade in the manufacturer ordering information.
STM32F302ZET6 vs STM32F302ZGT6 - which is better for firmware-heavy control?
The STM32F302ZGT6 is better for firmware-heavy control when application code, data logging, or update logic may exceed 512 KB because it offers 1 MB of Flash. The STM32F302ZET6 remains appropriate when the existing application fits comfortably within 512 KB and lower Flash capacity is preferred. Both share the 72 MHz Cortex-M4 family platform and 144-pin LQFP footprint, so the decision is primarily storage-driven subject to complete electrical and configuration verification.
Where can I buy STM32F302ZET6 online?
The STM32F302ZET6 can be requested through the Request a Quote form on this product page. The form is the appropriate channel for checking current commercial availability, lead time, quantity requirements, and delivery options for the exact 144-pin LQFP ordering code. Confirm that the quoted manufacturer part number is STM32F302ZET6 rather than a related STM32F302ZET7 or STM32F302ZGT6 variant when placement requirements differ.
What is the price and lead time for STM32F302ZET6?
Use the Request a Quote form on this page to obtain the current STM32F302ZET6 price, stock position, lead time, and minimum order quantity. Commercial terms can change with demand, inventory, and quantity, so a static quote may not reflect the current position. Specify the exact STM32F302ZET6 MPN, required quantity, and acceptable packaging configuration in the request to avoid confusion with Flash-capacity or temperature-grade variants.

Impormasyon ng Talumpati sa Engineering for STM32F302ZET6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the STM32F302ZET6 when the design needs a 72 MHz ARM Cortex-M4 core with an FPU, 512 KB of Flash, and extensive I/O in a 144-pin LQFP package. Choose STM32F302ZGT6 when the same family architecture and footprint are useful but firmware or data storage may exceed 512 KB. Select STM32F302ZET7 or STM32F302ZET8 when the required environmental temperature grade differs, after confirming the exact suffix limits in the manufacturer ordering information. For a compact PCB where fewer I/O and less Flash are sufficient, a smaller STM32 MCU may reduce area and complexity, but it will require a different footprint and pin assignment. Whichever ordering code is chosen, validate the complete pin map, peripheral mix, power architecture, startup behavior, and firmware configuration before production.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto STM32F302ZGT6 STM32F302ZET7 STM32F302ZET8
Manufacturer STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 144-LQFP (20 x 20 mm) 144-LQFP (20 x 20 mm) 144-LQFP (20 x 20 mm) 144-LQFP (20 x 20 mm)
CPU Core ARM Cortex-M4 with FPU ARM Cortex-M4 with FPU ARM Cortex-M4 with FPU ARM Cortex-M4 with FPU
Maximum CPU Frequency 72 MHz 72 MHz 72 MHz 72 MHz
Flash Memory 512 KB 1 MB 512 KB 512 KB
Flash Organization 512K x 8 bits 1M x 8 bits 512K x 8 bits 512K x 8 bits
Supply References 2.5 V and 3.3 V 2.5 V and 3.3 V 2.5 V and 3.3 V 2.5 V and 3.3 V
Instruction Set 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC
Ordering Temperature Grade Grade 6 suffix Grade 6 suffix Grade 7 suffix Grade 8 suffix

Pangunahing mga Pagkakaiba

  • Higher-capacity same-family upgrade (kumpara saSTM32F302ZGT6)
  • Temperature-grade flexibility (kumpara saSTM32F302ZET7)
  • Highest same-family ordering-temperature option (kumpara saSTM32F302ZET8)
  • Large LQFP package simplifies inspection and rework (kumpara saSTM32F302ZGT6)

Talaan ng Disenyo

Use the LQFP-144 land pattern and pin numbering from the STM32F302xD/E package drawing without translating it from a smaller STM32 footprint. Keep power and decoupling connections short, preserve the manufacturer-recommended input and output capacitor arrangement, and provide clean return paths for digital and analog grounds. The large exposed pin count also increases escape-routing complexity, so perform a courtyard and solder-mask review before releasing the PCB.

Confirm every operating-mode current, power-supply tolerance, internal-regulator configuration, and startup sequence against the manufacturer electrical tables before selecting the power architecture. The listed 2.5 V and 3.3 V references describe relevant supply points but do not replace the complete voltage-domain requirements. Validate brownout behavior, reset release, clock startup, and simultaneous peripheral load in hardware rather than assuming all rails can be sequenced identically.

Separate analog, digital, oscillator, and high-current return paths as appropriate for the selected peripheral mix. Place decoupling capacitors at their associated supply pins, keep oscillator loops compact, and avoid routing sensitive analog inputs beneath noisy digital or switching-net paths. Because alternate-function multiplexing differs by package, freeze the final pin assignment before PCB routing and review it directly against the LQFP-144 pin-description table.

Do not treat STM32F302ZGT6, STM32F302ZET7, or STM32F302ZET8 as automatic substitutes without checking boot configuration, temperature grade, Flash size, electrical limits, and firmware assumptions. The STM32F302ZGT6 changes Flash capacity, while the grade-7 and grade-8 variants change environmental ordering requirements. Although the package and core platform match, the device identity, startup code, and temperature-qualified component plan must still be reconciled with the production BOM.

The manufacturer product page and distributor summaries confirm the core, frequency, Flash capacity, and package, but they are not substitutes for the complete datasheet. Check SRAM, GPIO count, ADC and timer resources, serial interfaces, pin multiplexing, absolute maximum ratings, and package dimensions before schematic completion. A prototype that boots successfully still does not prove peripheral compatibility or regulatory robustness across the intended operating range.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No definitive compliance declaration was identified for the exact STM32F302ZET6 ordering code. Check the current manufacturer product page, material declaration, and applicable quality documents before incorporating these claims into a product compliance file.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

STM32F302ZET6 datasheet STM32F302ZET6 pinout STM32F302ZET6 datasheet pdf STM32F302ZET6 specifications STM32F302ZET6 LQFP-144 STM32F302ZET6 72MHz Cortex-M4 STM32F302ZET6 512KB Flash STM32F302ZET6 equivalent STM32F302ZET6 replacement STM32F302ZET6 vs STM32F302ZGT6 STM32F302ZET6 footprint STM32F302ZET6 application circuit STM32F302ZET6 price STMicroelectronics STM32F302ZET6 STM32F302ZET6 stock

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics STM32F302ZET6 STM32F302ZGT6 STM32F302ZET7 STM32F302ZET8 STM32F302xD/E ARM Cortex-M4 ARM Cortex-M4 FPU 32-bit RISC microcontroller embedded microcontroller mixed-signal microcontroller semiconductor LQFP-144 LQFP package family surface-mount package 72 MHz 512 KB Flash 2.5 V 3.3 V industrial automation motor control CAN sensor gateway data acquisition test and measurement
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ