STM32F745IGT6 - 216MHz Cortex-M7 MCU | STMicroelectronics
MPN: STM32F745IGT6 ✓ NakahandaSTM32F745IGT6 Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces on one package. The STM32F7 family belongs to the hierarchy of 32-bit MCU, embedded microcontroller, embedded processor, and semiconductor. Its Arm Cortex-M7 core provides the central processing platform, while Flash stores firmware and RAM supports active data, stack operations, and peripheral buffers. A 176-pin LQFP also provides a substantial number of external connections relative to smaller MCU packages.
The principal verified features include a 216 MHz maximum core frequency, 32-bit processing, 1 MB of 1M x 8 Flash, 340 KB of RAM, a 176-pin LQFP package, and operation from a stated 3.3 V supply. These specifications suit applications that require more flash storage and I/O capacity than a small general-purpose MCU, particularly when code size, external connectivity, and control integration drive component selection. The manufacturer describes the STM32F745xx family as high-performance Cortex-M7 devices operating up to 216 MHz.
The STM32F745IGT6 belongs to the same high-performance STM32F7 family as the STM32F746xx devices. The MCU is suitable for industrial automation, communications equipment, embedded control systems, audio and digital signal processing, and data-acquisition platforms. Because the supplied evidence does not enumerate the peripheral mix, pin names, electrical limits, or memory breakdown beyond the verified headline figures, those details should be confirmed in the official product documentation before schematic capture.
When designing a board around this controller, begin with the manufacturer pinout and reference design guidance rather than assigning LQFP pins from memory. Validate the regulator, decoupling network, clock strategy, debug programming interface, and exposed peripheral requirements against the exact STM32F745IGT6 package. A 176-pin footprint also demands careful PCB escape routing and assembly planning to avoid fine-pitch soldering or inspection defects.
For sourcing, DigiKey lists the part as buyable and ships today, while LCSC reports in-stock inventory and a starting price of $13.6194. Pricing and stock remain time-sensitive, so procurement should verify current availability, authorized-channel status, and volume pricing as of 2026-10-22. This page combines the supplied manufacturer, distributor, and cross-reference evidence with package-specific engineering guidance rather than inferring unsupported specifications.
Mga alternatibo na pwedeng ilagay na STM32F745IGT6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok STM32F745IGT6 (parehas na form factor at footprint) — pagkakaiba sa Package, Supply Voltage, Flash Memory, Mounting Type, ADC.
STM32F746IGT6
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →STM32F745IGT6 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| Processor Core | Arm Cortex-M7 |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 1 MB (1M x 8) |
| RAM Memory | 340 KB |
| Volte ng Pagbibigay | 3.3 V |
| Packhaging | 176-LQFP (24 x 24 mm) |
| Bilang ng Pin | 176 pins |
| Uri ng Pagpapasok | Surface mount |
| Series | STM32F7 Series |
| Device Family | STM32F745 |
| Flash Organization | 1M x 8 bits |
| Memory Category | High-performance embedded control |
Gabay sa Pin Configuration ng STM32F745IGT6 176-lqfp (24 x 24 mm)
Pin configuration para sa STM32F745IGT6 (176-lqfp (24 x 24 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa STM32F745IGT6.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
STM32F745IGT6 ay nararapat para sa 7 aplikasyons: Industrial Automation Controller, Communications Gateway, Audio and Digital Signal Processing, Data Acquisition and Measurement, Test and Measurement Instrument, Embedded Power and Motor Control, Secure Networked Embedded System.
Industrial Automation Controller
The STM32F745IGT6 fits an industrial controller that needs a 216 MHz Arm Cortex-M7 core, 1 MB of Flash, and a 176-pin LQFP interface for multiple control and communication signals. Its 32-bit processing platform can support time-critical supervisory logic while integrating peripheral functions on one device. The engineering trade-off is package complexity: a 176-pin LQFP requires disciplined escape routing, manufacturing controls, and careful validation of the exact pin assignments before fabrication.
Inirekomenda
Communications Gateway
For a communications gateway, the STM32F745IGT6 combines a 216 MHz 32-bit Cortex-M7 core with 1 MB Flash and a large 176-pin package, providing room for protocol handling, buffering, and multiple external interfaces. The device is a strong fit when firmware size and deterministic processing are priorities. However, the supplied sources do not confirm specific Ethernet, USB, or transceiver peripherals, so interface suitability must be checked against the official STM32F745IG documentation.
Inirekomenda
Audio and Digital Signal Processing
The STM32F745IGT6 is a credible candidate for embedded audio or DSP-related control because it provides a 216 MHz Arm Cortex-M7 processor and 1 MB Flash in a 176-LQFP package. The higher clock rate can reduce the processing headroom needed for real-time signal handling compared with a lower-speed general-purpose MCU. Confirm the required DSP peripherals, audio interfaces, memory accessibility, and latency behavior in the exact device documentation before committing the architecture.
Inirekomenda
Data Acquisition and Measurement
A data-acquisition system can use the STM32F745IGT6 as a high-speed supervisory and processing controller when a 32-bit Cortex-M7 core, 1 MB Flash, and broad package connectivity are valuable. Its 216 MHz operating rate can support time-sensitive sampling control and data movement, subject to the availability of the required timers, ADC, and DMA resources. Those peripheral details are not present in the supplied snippets and should be verified before assigning acquisition channels.
Inirekomenda
Test and Measurement Instrument
The STM32F745IGT6 is suitable for a test-and-measurement controller when the instrument requires a fast 32-bit core, substantial firmware storage, and numerous external control connections. The 176-LQFP package provides access to a broad pin budget, while 1 MB Flash can accommodate embedded control, calibration, and communications code. For precision instruments, verify analog interfaces, timer accuracy, clock sources, low-power behavior, and operating temperature against the manufacturer datasheet.
Inirekomenda
Embedded Power and Motor Control
The STM32F745IGT6 can serve as the supervisory controller in a power or motor-control platform when high processing speed and a large pin count simplify integration of control, protection, and communications functions. Its 216 MHz Cortex-M7 core provides substantial real-time compute headroom, while 1 MB Flash supports firmware complexity. The exact timer outputs, analog channels, safety behavior, and control-loop timing are not verified in the supplied data, so engineers should confirm those resources before final control-loop design.
Inirekomenda
Secure Networked Embedded System
The STM32F745IGT6 is a candidate for networked embedded equipment that needs a high-performance core and sufficient firmware capacity for protocol stacks and application logic. Its 1 MB Flash and 340 KB RAM provide more storage headroom than small MCUs, while the 176-LQFP package can accommodate extensive board-level connectivity. Exact security peripherals, boot features, protocol support, and lifecycle guarantees must be verified from the manufacturer documentation before making a security claim.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for STM32F745IGT6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | STM32F746IGT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 176-LQFP (24 x 24 mm) | 176-LQFP (24 x 24 mm) - listed comparison candidate; verify exact footprint |
| Processor Core | Arm Cortex-M7 | Arm Cortex-M7 family device; exact details not supplied |
| Pin Count | 176 pins | 176-pin class in comparison context; verify exact package |
| Product Category | High-performance embedded MCU | STM32F7 family comparison candidate |
Pangunahing mga Pagkakaiba
- High-performance Cortex-M7 processing (kumpara saSTM32F746IGT6)
- Large verified firmware and RAM resources (kumpara saSTM32F746IGT6)
- High pin-count integration (kumpara saSTM32F746IGT6)
Talaan ng Disenyo
Use the official STM32F745IG package drawing as the source of truth for the 176-LQFP footprint. Do not substitute a generic LQFP-176 land pattern without checking body size, pitch, pin numbering, solder-mask clearance, and courtyard dimensions. Route power, ground, clocks, and high-speed signals using the manufacturer's reference recommendations where available, and review the design with the assembly house before release.
Design the 3.3 V supply path only after checking the exact STM32F745IGT6 electrical limits and current requirements in the manufacturer documentation. Provide local decoupling at the device pins, maintain the required supply sequencing, and keep switching-regulator noise away from sensitive analog and communication routes. The supplied data confirms a 3.3 V configuration but does not provide current limits or decoupling values.
Do not treat STM32F746IGT6 as a verified drop-in replacement solely because it appears in the same STM32F7 comparison context. Confirm pin names, alternate functions, memory, peripheral availability, clocking, electrical limits, and firmware device identification before substitution. A same-family relationship can simplify evaluation, but it does not prove that the replacement can be soldered and operated without redesign.
Plan the fine-pitch 176-LQFP assembly early. Validate paste volume, reflow profile, pad geometry, component spacing, test access, and optical inspection requirements. Keep sensitive clocks and communication interfaces away from noisy power conversion stages, and use continuous ground structures where the package and board stackup permit. The 24 x 24 mm package is compact for a 176-pin device but still requires careful escape routing.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified web data does not explicitly state compliance status for the STM32F745IGT6. Obtain current declarations from STMicroelectronics or the authorized distributor before making a compliance determination.