STM8L151G4Y3TR - 16MHz Low-Power 8-Bit MCU | STMicroelectronics
MPN: STM8L151G4Y3TR ✓ NakahandaSTM8L151G4Y3TR Ulas
An ultra-low-power microcontroller is an embedded semiconductor designed to minimize energy consumption during active operation, idle periods, and shutdown. The STM8L family sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductor components intended for battery-powered or energy-conscious equipment. This positioning makes the STM8L151G4Y3TR suitable for applications in which average current, board area, and predictable low-power behavior matter more than high computational throughput.
The device provides an enhanced 8-bit STM8 CPU core, operation up to 16 MHz, and up to 16 MIPS according to the STM8L151x2/3 family description. Its memory configuration provides 32 KB Flash for firmware and 2 KB RAM for working data. The 1.8 V to 3.6 V supply range supports both 2.5 V and 3.3 V system architectures. A 28-WLCSP package with a 1.7 mm × 2.84 mm footprint supports compact layouts, although its fine pitch requires careful PCB assembly and inspection.
The STM8L architecture emphasizes low-power embedded control rather than high-speed connectivity processing. The combination of an 8-bit CPU, 16 MHz maximum clock, and EnergyLite design is useful for sensor nodes, compact controls, and battery-operated products where the controller must periodically measure, evaluate, and transmit information while spending most of its time in a low-energy state. Peripheral functionality and exact low-current figures should be confirmed against the manufacturer datasheet for the selected operating mode, clock configuration, and temperature range.
Typical applications include low-power sensor nodes, compact industrial control modules, battery-powered instrumentation, wearable accessories, and embedded products requiring a small-footprint microcontroller. The device is particularly relevant where a 3.3 V rail is available, the application can be implemented with an 8-bit controller, and board area limits make the 28-WLCSP package attractive.
The primary design challenge is manufacturing rather than electrical capability. Follow the manufacturer’s land pattern, solder-mask and paste recommendations, reflow profile, and pin-assignment table for STM8L151G4Y3TR. Confirm the exposed-pad or thermal-via arrangement in the package drawing before releasing a PCB footprint, and validate programming, reset, clock, and low-power behavior on production-intent hardware.
This product record combines the manufacturer family information, distributor specifications, packaging data, and sourcing considerations in one engineering-focused reference. It also identifies same-family drop-in candidates while clearly distinguishing package-compatible substitutes from devices that would require PCB redesign or firmware validation.
Mga alternatibo na pwedeng ilagay na STM8L151G4Y3TR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok STM8L151G4Y3TR (parehas na form factor at footprint) — pagkakaiba sa Flash Memory, Package, Product Type, Series, Core Architecture.
STM8L151G3Y3TR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM8L152G4Y3TR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM8L152G3Y3TR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM8L151G2Y3TR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM8L152G2Y3TR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
STM8L151G4Y3TR Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit ultra-low-power microcontroller |
| Product Family | STM8L EnergyLite |
| Series | STM8L151x4/6 |
| Maksimum na Taktiko ng Oras | 16 MHz |
| Maximum CPU Performance | 16 MIPS |
| Flash Memory | 32 KB (32K × 8) |
| RAM | 2 KB |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Nominal Supply Voltage | 2.5 V or 3.3 V |
| Packhaging | 28-WLCSP (1.7 mm × 2.84 mm) |
| Uri ng Pagpapasok | Surface mount |
| Core Architecture | Enhanced 8-bit STM8 CPU core |
| I/O Ports | 41 |
| Life Cycle Stage | Active |
| Shipping Form | Tape and reel |
Gabay sa Pin Configuration ng STM8L151G4Y3TR 28-wlcsp (1.7 mm × 2.84 mm)
Pin configuration para sa STM8L151G4Y3TR (28-wlcsp (1.7 mm × 2.84 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa STM8L151G4Y3TR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
STM8L151G4Y3TR ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Nodes, Compact Industrial Control Modules, Low-Power Instrumentation, Wearable and Accessory Controllers, Smart Home Sensor Hubs, Compact Power and Management Systems.
Battery-Powered Sensor Nodes
The STM8L151G4Y3TR is well suited to battery-powered sensor nodes because its STM8L EnergyLite architecture operates from 1.8 V to 3.6 V and supports low-power product designs. The 16 MHz enhanced 8-bit core can supervise sensors, evaluate thresholds, and manage infrequent communication events, while 32 KB Flash and 2 KB RAM provide space for compact firmware. The 28-WLCSP package measuring 1.7 mm × 2.84 mm reduces board area in wearables, environmental monitors, and portable condition-monitoring products. Actual battery performance depends on the selected sleep mode, wake-up sources, sensor duty cycle, and time spent in active mode.
Inirekomenda
Compact Industrial Control Modules
The STM8L151G4Y3TR can serve as the local controller in a compact industrial module where a 3.3 V rail, low standby consumption, and limited board area are priorities. Its 16 MHz 8-bit processing core is suitable for discrete control functions, status monitoring, and simple data acquisition, while the 1.8 V to 3.6 V operating range supports multiple industrial power architectures. The 28-WLCSP footprint allows placement close to sensors or power circuitry. Design validation should include industrial temperature limits, ESD requirements, brownout behavior, and the fine-pitch assembly capability of the chosen PCB process.
Inirekomenda
Low-Power Instrumentation
The STM8L151G4Y3TR fits low-power instrumentation that measures a small number of analog or digital inputs and performs local calibration or control. Its 16 MHz maximum clock provides sufficient performance for ordinary embedded tasks, while 32 KB Flash and 2 KB RAM support a focused application without a larger microcontroller package. The 1.8 V to 3.6 V supply range is compatible with 2.5 V and 3.3 V instrumentation rails. For stable readings, the controller should power sensitive circuits cleanly, use the manufacturer’s pin and decoupling guidance, and separate noisy switching or communication paths from sensitive measurement circuitry.
Inirekomenda
Wearable and Accessory Controllers
The STM8L151G4Y3TR is appropriate for wearables and compact accessories that need local control, button handling, and periodic sensor management. Its ultra-low-power STM8L architecture is appropriate for products that spend substantial time inactive, and the 28-WLCSP package leaves room for cells, sensors, and communications in a constrained layout. The 16 MHz CPU and 32 KB Flash support compact application logic, while the 2.5 V and 3.3 V operating arrangements assist battery-rail integration. The small package also creates manufacturing challenges, so assembly capability, warpage handling, and inspection coverage should be validated before volume production.
Inirekomenda
Smart Home Sensor Hubs
The STM8L151G4Y3TR can act as a local smart-home sensor controller for occupancy, environmental, or equipment-state monitoring. The STM8L151G4Y3TR's 1.8 V to 3.6 V operating range supports low-voltage distributed sensors, and its 16 MHz 8-bit core can aggregate digital inputs, control indicators, and manage low-rate communication. The 28-WLCSP footprint is useful where the sensor board must fit behind a compact enclosure. Because smart-home products frequently synchronize with external ecosystems, firmware should include stable device identification and validate communication timing during wake and sleep transitions.
Inirekomenda
Compact Power and Management Systems
The STM8L151G4Y3TR is suitable for auxiliary control in compact power and management systems where a low-voltage microcontroller must supervise status, configure a peripheral, or enforce operating sequences. Its 32 KB Flash capacity accommodates embedded control logic, and the 2 KB RAM supports buffering for short communication transactions. The 1.8 V to 3.6 V supply range permits operation from regulated low-voltage rails. The WLCSP package can reduce controller-board area, but power-system designs must maintain clear separation between sensitive analog measurement paths, switching nodes, and high-current return paths to prevent switching noise from affecting control behavior.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for STM8L151G4Y3TR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | STM8L151G3Y3TR | STM8L152G4Y3TR | STM8L152G3Y3TR | STM8L151G2Y3TR | STM8L152G2Y3TR |
|---|---|---|---|---|---|---|
| Package | 28-WLCSP (1.7 mm × 2.84 mm) | 28-WLCSP (1.7 mm × 2.84 mm) | 28-WLCSP (1.7 mm × 2.84 mm) | 28-WLCSP (1.7 mm × 2.84 mm) | 28-WLCSP (1.7 mm × 2.84 mm) | 28-WLCSP (1.7 mm × 2.84 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Product Family | STM8L151x4/6 | STM8L151x2/3 | STM8L152x4/6 | STM8L152x2/3 | STM8L151x2/3 | STM8L152x2/3 |
| CPU Architecture | Enhanced 8-bit STM8 core | Enhanced 8-bit STM8 core | Enhanced 8-bit STM8 core | Enhanced 8-bit STM8 core | Enhanced 8-bit STM8 core | Enhanced 8-bit STM8 core |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 32 KB (32K × 8) | 16 KB | 32 KB | 16 KB | 8 KB | 8 KB |
| RAM | 2 KB | 1 KB | 2 KB | 1 KB | 1 KB | 1 KB |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Shipping Form | Tape and reel | Tape and reel | Tape and reel | Tape and reel | Tape and reel | Tape and reel |
Pangunahing mga Pagkakaiba
- Higher-density configuration within the 28-WLCSP footprint (kumpara saSTM8L151G3Y3TR)
- Direct STM8L152 family option without changing the WLCSP land pattern (kumpara saSTM8L152G4Y3TR)
- Compact 1.7 mm × 2.84 mm package (kumpara saSTM8L152G2Y3TR)
Talaan ng Disenyo
Use the exact STM8L151G4Y3TR package drawing to create the 28-WLCSP land pattern, including the center ground or thermal-via arrangement shown by STMicroelectronics. Maintain the recommended solder-mask definition and paste apertures for the 1.7 mm × 2.84 mm package. Confirm pad and ball numbers against the manufacturer pin table before routing power, ground, reset, clock, and programming signals.
Design the supply path for the full 1.8 V to 3.6 V operating range and place required bypass capacitors close to the appropriate power and ground pins. Route high-current return paths away from sensitive clock and programming nets. Review brownout and low-voltage behavior in the datasheet, especially if the MCU controls a power rail or must recover safely after a supply interruption.
Keep the 16 MHz clock path short, preserve return-current continuity, and avoid routing communication or programming signals beneath areas where switching circuitry may create ground disturbance. Treat the WLCSP assembly as a fine-pitch process and validate pad condition, paste volume, placement accuracy, and reflow profile on representative boards before production.
Do not substitute a lower-density G2 or G3 device without reviewing its Flash, RAM, and peripheral configuration. The G4 and G3 product descriptions also differ in published Flash figures, so the exact ordering table should control the device configuration. Validate boot code, option bytes, reset behavior, and application firmware whenever the density or STM8L151/STM8L152 family changes.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. Confirm the declarations for the exact orderable part with STMicroelectronics before environmental qualification.