STMicroelectronics

STM8S103F2U6TR - 8-Bit 16MHz MCU | STMicroelectronics

MPN: STM8S103F2U6TR ✓ Nakahanda
3.3 V to 5 V Vdss 20-pin UFQFPN Package 16 MHz Speed 4 KB Memory
MOQ: 1 |

STM8S103F2U6TR Ulas

The STMicroelectronics STM8S103F2U6TR is an 8-bit STM8S access-line microcontroller with a 16 MHz clock, 4 KB Flash program memory, integrated true data EEPROM, and a 20-pin UFQFPN package. It combines a compact 8-bit CISC core with 10-bit ADC conversion and communication peripherals including UART, SPI, and I²C, making it suitable for compact embedded control and sensing designs.

An 8-bit microcontroller is a microprocessor core integrated with memory, peripherals, and interfaces on one semiconductor device. The STM8S family belongs to the broader embedded-controller hierarchy: microcontroller -> 8-bit MCU -> STM8S access line. This classification is important because STM8S devices are intended for cost-sensitive applications where deterministic control, moderate processing demand, and a compact peripheral set are more important than high-bandwidth application processing.

The STM8S103F2U6TR combines three key resources: a 16 MHz operating clock, 4 KB of Flash program memory, and an integrated true data EEPROM. The manufacturer describes the STM8S103F2/x3 access line as offering up to 8 KB of Flash memory and integrated true data EEPROM, with the exact density selected by the device ordering code. Additional listed features include a 10-bit ADC, three timers, UART, SPI, and I²C interfaces.

This feature mix supports small control systems that periodically measure analog inputs, apply control logic, retain configuration or calibration values, and communicate with sensors or actuators. Three timers support timing and PWM-oriented tasks, while the serial interfaces allow connection to displays, sensors, memories, and external converters. The 20-pin UFQFPN format also keeps the PCB footprint compact for space-constrained assemblies.

Typical uses include building controls, small motor controllers, sensor nodes, appliance control boards, simple instrumentation, and battery-powered monitoring products. The STM8S103F2U6TR is particularly appropriate when a design needs 16 MHz processing performance, EEPROM retention, and conventional serial buses without the resource demands of an ARM Cortex-M microcontroller.

A critical design consideration is verifying the exact pin multiplexing, peripheral assignments, and alternate-function restrictions for the UFQFPN-20 footprint in the manufacturer datasheet. Designers should also confirm power-pin and decoupling requirements, clock configuration, and the programming interface before committing the PCB layout.

This product page combines the manufacturer device description, distributor ordering information, package and memory details, application guidance, sourcing workflows, and an explicit comparison of documented alternatives. It also highlights the limits of a drop-in replacement search: a similar memory size or package name alone does not establish pin-to-pin compatibility.

Mga alternatibo na pwedeng ilagay na STM8S103F2U6TR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

STM8S103F2U6TR Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit microcontroller
Product Series STM8S103 access line
Maximum CPU Frequency 16 MHz
Flash Program Memory 4 KB
Program Memory Organization 4K x 8 bits
Family Maximum Flash Memory 8 KB for STM8S103F2/x3
Data EEPROM Integrated true data EEPROM
ADC Resolution 10 bits
Timer Count 3 timers
UART 1 UART interface
SPI 1 SPI interface
I2C 1 I2C interface
Volte ng Pagbibigay 3.3 V to 5 V
Packhaging 20-pin UFQFPN
Uri ng Pagpapasok Surface mount
Shipping Format Tape and reel
Instruction Set 8-bit CISC
Product Line STM8S

Gabay sa Pin Configuration ng STM8S103F2U6TR 20-pin ufqfpn

Pin configuration para sa STM8S103F2U6TR (20-pin ufqfpn package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 20-pin ufqfpn package para sa STM8S103F2U6TR

Wala ng detalyadong pinout data na magagamit para sa STM8S103F2U6TR.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

STM8S103F2U6TR ay nararapat para sa 6 aplikasyons: Building Automation Controller, Small Motor Control Module, Industrial Sensor Node, Appliance Control Board, Battery-Powered Monitor, Simple Data Acquisition Module.

🏭

Building Automation Controller

The STM8S103F2U6TR fits compact building-control modules that monitor analog sensors, maintain operating state, and communicate with room equipment. Its 10-bit ADC supports basic temperature, light, or occupancy-sensor interfaces, while three timers provide periodic sampling and timed actuator control. The 4 KB Flash stores the control application, and integrated true data EEPROM can preserve calibration or configuration values across power cycles. UART, SPI, and I²C provide flexible links to sensors and peripheral ICs. The 20-pin UFQFPN footprint also helps reduce board area in wall-control or smart-building products. Firmware should use a defined acquisition interval and protect EEPROM writes with wear-control logic.

🔧

Small Motor Control Module

The STM8S103F2U6TR is appropriate for low-power motor-control modules that require timers, analog feedback, and serial configuration. Its three timers can organize commutation or PWM-related tasks, and the 10-bit ADC can measure position, current, or temperature feedback through suitable external circuitry. The 16 MHz clock provides deterministic timing for routine control updates, while the EEPROM can retain calibration values and operating limits. UART or I²C allows a host controller to set operating modes and receive diagnostics. Because the MCU does not directly specify the external transistor or motor stage, designers must size that power circuit separately and confirm timing and pin multiplexing in the manufacturer documentation.

📡

Industrial Sensor Node

The STM8S103F2U6TR supports compact industrial sensor nodes that sample low-speed analog quantities and transmit measurements over a short serial link. The 10-bit ADC handles suitable sensor outputs, the three timers support regular sampling and timeout behavior, and the integrated EEPROM can retain node identity, calibration coefficients, or operating limits. UART, SPI, and I²C give designers options for connecting local sensors and external transceivers. Its 4 KB Flash is appropriate for focused acquisition and communication firmware rather than large data buffering. In a deployed node, use oscillator and clock settings appropriate to the communication protocol, add power-supply filtering around noisy field wiring, and validate EMC performance at the finished-product level.

🔧

Appliance Control Board

The STM8S103F2U6TR is well matched to appliance controllers that coordinate switches, sensors, displays, and communication peripherals. A 16 MHz 8-bit core can execute deterministic state-machine control, while the three timers support timing and PWM functions for motors, valves, indicators, or heaters. The 10-bit ADC can supervise analog feedback, and EEPROM can preserve configuration or fault history. The compact 20-pin UFQFPN package is valuable in space-constrained appliances, although pin multiplexing must be checked carefully before assigning every interface. Firmware should include startup validation, safe-state defaults, debounce handling for mechanical inputs, and protection against brownout conditions during motor or heater startup.

🔋

Battery-Powered Monitor

The STM8S103F2U6TR can serve in a small battery-powered monitor when the application prioritizes a compact footprint, EEPROM retention, and conventional serial interfaces rather than high computing throughput. Periodic measurement can use the 10-bit ADC, timers can schedule sampling, and the integrated EEPROM can avoid repeatedly writing settings to external nonvolatile memory. UART, SPI, and I²C support communication with display, sensing, or configuration devices. The 4 KB Flash limits application complexity, so firmware should minimize buffers and avoid unnecessary libraries. Power-budget calculations should include the MCU, external sensors, interface pull-ups, and regulator quiescent current. Sleep-mode wakeup behavior and peripheral clock requirements must be verified for the exact device configuration.

📟

Simple Data Acquisition Module

The STM8S103F2U6TR can implement a focused data-acquisition front end with analog inputs, local configuration, and serial export. The 10-bit ADC is suitable for slow-changing industrial or instrumentation signals, while three timers can establish sampling cadence and communication timing. Integrated true data EEPROM allows calibration factors, channel settings, or a run counter to survive power loss. UART provides a straightforward host interface, and I²C or SPI can connect higher-capacity storage or sensor devices when required. The 4 KB Flash constrains buffering and complex protocol stacks, so a host processor may be preferable for large datasets. Signal conditioning, input protection, grounding, and ADC reference integrity are as important as the MCU selection in a reliable acquisition design.

What is the STM8S103F2U6TR?
The STM8S103F2U6TR is an 8-bit STM8S access-line microcontroller from STMicroelectronics with a 16 MHz clock, 4 KB Flash, integrated true data EEPROM, and a 20-pin UFQFPN package. According to the STM8S103F2 product page, the STM8S103F2/x3 family provides up to 8 KB of Flash plus integrated true data EEPROM. The device also includes a 10-bit ADC, three timers, UART, SPI, and I²C.
What is the clock speed of the STM8S103F2U6TR?
The STM8S103F2U6TR operates at up to 16 MHz. This frequency provides the timing basis for the STM8S 8-bit core and its timer, ADC, and serial-interface operations. The distributor ordering record identifies the device as an STM8 8-bit, 16 MHz microcontroller, while the manufacturer page identifies it as part of the STM8S103F2/x3 access line. Clock source and divider settings should be confirmed in the device datasheet.
How much Flash and EEPROM does the STM8S103F2U6TR have?
The STM8S103F2U6TR has 4 KB of Flash program memory, organized as 4K x 8 bits. STMicroelectronics describes the broader STM8S103F2/x3 access line as offering up to 8 KB of Flash together with integrated true data EEPROM. The integrated EEPROM provides separate nonvolatile storage for parameters, calibration values, or state that should remain independent from program code.
What peripherals are available on the STM8S103F2U6TR?
The STM8S103F2U6TR includes a 10-bit ADC, three timers, UART, SPI, and I²C interfaces. These resources cover common embedded-control tasks: analog measurement, timing, PWM generation, sensor communication, and connection to external serial devices. The exact peripheral functions assigned to each package pin must be selected from the manufacturer pinout and alternate-function tables during PCB design.
What package does the STM8S103F2U6TR use?
The STM8S103F2U6TR uses a 20-pin UFQFPN surface-mount package and is ordered in tape-and-reel format. The compact package supports small control boards, but it requires careful PCB layout because the fine-pitch leads leave limited routing space. The package dimensions, exposed-pad arrangement, pin numbering, and land pattern should be taken directly from the manufacturer package drawing.
Where can I download the STM8S103F2U6TR datasheet?
The official STM8S103F2U6TR documentation is available through STMicroelectronics at https://www.st.com/en/microcontrollers-microprocessors/stm8s103f2.html. The manufacturer page links device information for the STM8S103F2 family, including its access-line positioning, Flash and EEPROM resources, and peripheral capabilities. Use the manufacturer PDF for authoritative pin assignments, electrical limits, memory maps, programming details, and package dimensions.
Where is the STM8S103F2U6TR pinout?
The STM8S103F2U6TR pinout is documented in the pin-description and alternate-function tables of the manufacturer datasheet for the 20-pin UFQFPN package. Assign signals using those tables rather than inferring pin locations from a similarly named SOIC variant. Pay particular attention to power, ground, reset, clock, programming, and alternate-function restrictions because each UFQFPN position may serve more than one peripheral signal.
Is STM8S103F2U6TR suitable for sensor and motor-control applications?
Yes, the STM8S103F2U6TR is suitable for small sensor and motor-control products because it combines a 16 MHz 8-bit core with a 10-bit ADC, three timers, EEPROM, and three serial interfaces. The timers can support periodic control and PWM tasks, the ADC can sample analog sensors, and I²C or SPI can connect to external devices. Actual motor-drive sizing still depends on the load and external power stage.
STM8S103F2U6TR vs STM8S103F2M6TR: which is the better replacement?
STM8S103F2U6TR is the better PCB replacement only when the original board uses the corresponding 20-pin UFQFPN footprint and its pin functions match. The STM8S103F2M6TR appears in ordering information as a 20-SO variant, so its physical footprint cannot be assumed interchangeable despite the shared STM8S103F2 family name. Verify land patterns, pin assignments, and electrical details before replacing either device.
When should I choose STM8S103F2U6TR instead of a larger STM8 MCU?
Choose the STM8S103F2U6TR when the application fits an 8-bit control architecture and benefits from a compact 20-pin UFQFPN, 4 KB Flash, EEPROM, ADC, timers, UART, SPI, and I²C. Consider a larger STM8 when the design needs substantially more Flash, RAM, processing throughput, peripheral capacity, or software ecosystem support. The appropriate choice depends on workload headroom rather than package count alone.
What can replace the STM8S103F2U6TR?
The safest replacement is an ordering code specifically documented with the same 20-pin UFQFPN land pattern, electrical limits, and pin multiplexing. STM8S103F2M6TR is a related STM8S103F2 device, but its 20-SO package requires different PCB pads. No cross-manufacturer part should be treated as a drop-in replacement without a device-specific pin, timing, memory, and peripheral verification.
Is there an STMicroelectronics equivalent for STM8S103F2U6TR?
STM8S103F2M6TR is a closely related STMicroelectronics ordering code, but the documented package distinction prevents it from being a guaranteed drop-in match for the UFQFPN-20 STM8S103F2U6TR. STMicroelectronics STM8S103F2P3TR and other STM8S variants also differ in package or density. A valid substitution requires matching the original PCB footprint and then checking pin functions, memory, clocks, and peripherals.
What are the key specifications engineers should know about STM8S103F2U6TR?
The key STM8S103F2U6TR specifications are an 8-bit CISC core, 16 MHz maximum clock, 4 KB Flash, integrated true data EEPROM, 10-bit ADC, three timers, UART, SPI, I²C, 3.3 V to 5 V operation, and a 20-pin UFQFPN package. The manufacturer identifies the part as an STM8S access-line microcontroller. These figures place it between simple logic controllers and more highly integrated general-purpose MCUs.
Where can I buy STM8S103F2U6TR and check its lead time?
Use the Request a Quote form on this page to request STM8S103F2U6TR pricing, current stock, order quantity, and lead time. The part is listed for tape-and-reel ordering, and current commercial availability can change rapidly. Provide the required quantity and delivery destination with the request so the purchasing response can reflect the appropriate supply condition and shipment plan.
Is STM8S103F2U6TR in stock?
Stock status should be confirmed through the Request a Quote form on this page because inventory for this tape-and-reel ordering code changes with demand and regional supply. The listing identifies STM8S103F2U6TR as a 20-pin UFQFPN device with a manufacturer ordering code suitable for standard production orders. Submit the required quantity and target delivery schedule for a current supply response.

Impormasyon ng Talumpati sa Engineering for STM8S103F2U6TR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the STM8S103F2U6TR for compact embedded-control products that need a 16 MHz 8-bit core, 4 KB Flash, integrated true data EEPROM, a 10-bit ADC, three timers, and UART, SPI, or I²C in a 20-pin UFQFPN footprint. It is a practical fit for sensing, appliance control, building equipment, and small instrumentation products where board area matters. Select STM8S103F2M6TR only when its 20-SO footprint matches the target PCB and the remaining device functions are equivalent. STM8L101F2P3TR or STM8L152K6U6TR may be considered when their package, memory, clock, and peripheral arrangements better match a redesigned board. No related ordering code should replace the target solely because it belongs to STM8 or uses 20 pins; verify land pattern, pin multiplexing, electrical limits, and firmware requirements first.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 20-pin UFQFPN
Brand STMicroelectronics
CPU Architecture 8-bit CISC
Maximum Frequency 16 MHz
Flash Program Memory 4 KB
Data EEPROM Integrated true data EEPROM
ADC Resolution 10 bits
Timers 3 timers
Serial Interfaces UART, SPI, and I2C
Supply Voltage 3.3 V to 5 V

Pangunahing mga Pagkakaiba

  • Integrated true data EEPROM in a compact 8-bit controller (kumpara saSTM8S103F2M6TR)
  • 16 MHz operation with integrated EEPROM retention (kumpara saSTM8L101F2P3TR)
  • Access-line feature integration in a 20-pin surface-mount package (kumpara saSTM8L152K6U6TR)

Talaan ng Disenyo

Assign every signal from the manufacturer 20-pin UFQFPN pinout and alternate-function tables before routing the PCB. Confirm that the exposed pad, if required by the package drawing, is connected according to the recommended land pattern. Use short ground connections and place decoupling capacitors close to the device supply pins. The fine-pitch UFQFPN footprint leaves limited escape-routing space, so programming, reset, clock, and communication nets should be planned early.

Budget the supply rail for the MCU, external interfaces, and connected sensors rather than treating the controller as the only load. Verify that the selected 3.3 V or 5 V operating condition matches every external peripheral and signal level. Include bulk and local decoupling according to the manufacturer recommendations, and keep high-current switching or motor transients away from sensitive analog and ground-return paths.

Do not treat STM8S103F2M6TR as an automatic board-for-board replacement for STM8S103F2U6TR because the documented packages differ: UFQFPN-20 for the target and 20-SO for the related ordering code. Likewise, members of the STM8L family may use different packages, pin assignments, clocks, and peripherals. A valid replacement requires checking the package drawing, pin table, memory density, clock limits, peripherals, and electrical characteristics against the existing design.

Separate analog measurement routes from switching or communication return currents, and use a coherent grounding strategy for the ADC reference. Route the 16 MHz clock with short, symmetric geometry where practical and keep it away from high-current switching edges. Follow the manufacturer's oscillator and decoupling guidance when external timing components are used. Validate the final layout for signal integrity and EMC because firmware cannot correct a marginal clock or analog-front-end layout.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance declarations require confirmation from the current STMicroelectronics product documentation or declaration for this ordering code.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

STM8S103F2U6TR datasheet STM8S103F2U6TR pinout STM8S103F2U6TR datasheet pdf STM8S103F2U6TR specifications STM8S103F2U6TR equivalent STM8S103F2U6TR replacement STM8S103F2U6TR cross reference STM8S103F2U6TR footprint STM8S103F2U6TR application circuit STM8S103F2U6TR price STM8S103F2U6TR stock STMicroelectronics STM8S103F2U6TR STM8S103F2 vs STM8S103F2M6TR 20 pin UFQFPN 8-bit MCU

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics STM8S103F2U6TR STM8S103F2 STM8S103F2M6TR STM8S microcontroller 8-bit MCU embedded controller CISC 16 MHz 4 KB Flash true data EEPROM 10-bit ADC three timers UART SPI I2C UFQFPN-20 QFN family surface mount industrial control sensor node appliance control data acquisition STM8L152K6U6TR
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ