PABALIKANG MAGBILI NG IKAKATUWID: SY88773VMG ay papalapit sa katapusan ng buhay. Huling pagsugod ng order: Magkontak sa amin. Tingnan ang mga magagamit na alternatibong bahagi →
Microchip Technology

SY88773VMG - 3.2 Gbps CML Post Amplifier | Microchip

MPN: SY88773VMG ✗ Tapus ng Buhay
3.3 V to 5 V Vdss 16-MLF Package
MOQ: 1 |

SY88773VMG Ulas

The Microchip Technology SY88773VMG is a low-power limiting postamplifier IC designed for optical-network receivers, with a 3.2 Gbps data rate, a 3.3 V to 5 V supply range, and a 16-MLF 3 x 3 mm package. The device provides signal limiting with constant-amplitude output, programmable gain operation, input fault detection, and an enable or shutdown function.

A limiting postamplifier is a specialized amplifier IC used after a photodiode or optical receiver front end. Its place in the hierarchy is receiver amplifier -> limiting postamplifier -> communications signal-conditioning IC. It amplifies small incoming signals, limits amplitude to prevent overload, and restores the signal to a digital-compatible level before transmission to a clock-recovery circuit, comparator, or higher-speed logic stage.

The SY88773VMG combines high-speed CML signaling with receiver-oriented control features. Its 3.2 Gbps capability makes it suitable for multi-gigabit optical links, while the programmable gain mode allows system designers to tune amplification through external circuitry. Input fault detection provides a hardware signal for abnormal input conditions, and the shutdown function can reduce power consumption when the receiver is not operating.

The 3.3 V to 5 V operating range supports both lower-voltage optical module designs and conventional 5 V receiver architectures. Its limiting behavior helps maintain a controlled output amplitude when the input exceeds the intended signal range, reducing the risk that excessive upstream gain drives the downstream receiver into an unreliable state. The low-power design is particularly useful where thermal dissipation and module-level power budgets are constrained.

Typical uses include SONET-style optical receivers, 10G-class optical network modules, clock-and-data recovery subsystems, and other high-speed fiber-optic interfaces. The device can also serve as a general limiting amplifier where a constant-amplitude output and fault monitoring are required rather than conventional linear amplification.

Layout is critical because a 3.2 Gbps CML interface has a short rise time and limited noise margin. Place decoupling capacitors close to the supply pins, keep high-speed differential traces short and continuous, and provide controlled return paths for the exposed-pad thermal and ground connection. Confirm the manufacturer pin-description and layout guidance before assigning signals.

This product page combines the device identity, package information, operating range, lifecycle status, verified replacement analysis, and application guidance to support faster receiver-design and sourcing decisions.

Mga alternatibo na pwedeng ilagay na SY88773VMG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

SY88773VMG Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Limiting postamplifier IC
Rate ng Data 3.2 Gbps
Supply Voltage Range 3.3 V to 5 V
Maximum Supply Voltage 5.5 V
Output Signal Type CML
Output Behavior Signal limiting with constant-amplitude output
Gain Configuration Programmable gain mode
Input Fault Detection Supported
Power Control Enable and shutdown function
Application Optical networks
Package Type 16-MLF
Package Dimensions 3 x 3 x 0.9 mm
Uri ng Pagpapasok Surface mount
Exposed Pad Present

Gabay sa Pin Configuration ng SY88773VMG 3 x 3 x 0.9 mm

Pin configuration para sa SY88773VMG (3 x 3 x 0.9 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 3 x 3 x 0.9 mm package para sa SY88773VMG

Wala ng detalyadong pinout data na magagamit para sa SY88773VMG.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

SY88773VMG ay nararapat para sa 6 aplikasyons: Optical Network Receiver Signal Conditioning, Clock and Data Recovery Preamp, High-Speed Optical Module Interface, CML Output Signal Restoration, Receiver Fault Monitoring, Legacy Fiber Optic Interface Maintenance.

🌐

Optical Network Receiver Signal Conditioning

The SY88773VMG fits the postamplifier stage of an optical receiver because it combines a 3.2 Gbps data-rate rating with constant-amplitude CML output. Positioned after the photodiode transimpedance or gain stage, it restores signal amplitude while limiting excursions that could overload downstream clock-and-data recovery circuitry. Programmable gain permits system-level adjustment of signal swing, while the 3.3 V to 5 V supply range supports both legacy 5 V and lower-voltage receiver architectures. Because the device is end-of-life, it is most appropriate for maintaining an existing receiver design rather than launching a new platform.

🌐

Clock and Data Recovery Preamp

The SY88773VMG can serve as the limiting stage before a clock-and-data recovery device in a multi-gigabit optical link. Its 3.2 Gbps rating aligns with receiver channels operating at that rate or below, while constant-amplitude output limits the signal presented to the recovery input. Programmable gain helps align the signal swing across manufacturing tolerances and channel-loss variations. The shutdown function is useful during initialization or power management, although the receiver's timing budget must be verified with system-level eye and jitter measurements before the amplifier is approved for production.

💡

High-Speed Optical Module Interface

The SY88773VMG is appropriate for legacy high-speed optical modules that use a discrete or semi-discrete receive chain and require a dedicated limiting amplifier. Its 3.3 V to 5 V operating range permits integration into both 3.3 V and 5 V module power architectures, and the 16-MLF 3 x 3 x 0.9 mm package supports compact board layouts. The exposed pad provides a defined thermal and electrical connection when implemented according to the manufacturer layout guidance. For new module development, the end-of-life status makes a currently supported receiver IC the preferred architecture.

📡

CML Output Signal Restoration

The SY88773VMG can restore a usable CML signal after a receiver front end has amplified a small differential input. Constant-amplitude limiting controls output swing when the input varies across link margin and receiver sensitivity conditions, while programmable gain allows calibration or component-level tuning of signal amplitude. The 3.2 Gbps capability supports high-speed differential signaling, but board-level implementation must minimize trace mismatch and return-path discontinuities. Differential pair symmetry, controlled impedance, and exposed-pad grounding are essential because these layout factors can affect eye closure and deterministic jitter.

🖥️

Receiver Fault Monitoring

The input fault-detection feature makes the SY88773VMG useful in optical receivers where abnormal input conditions must be reported to supervision logic. The amplifier can condition the nominal receive path while providing a fault indication when the input enters an invalid state, allowing the host to distinguish loss of signal from a healthy operating condition. The enable or shutdown function supports controlled operating states and may reduce consumption when the receive path is inactive. Firmware and hardware design must define the correct fault polarity, threshold behavior, and shutdown state using the manufacturer pin and function descriptions.

🔧

Legacy Fiber Optic Interface Maintenance

The SY88773VMG remains relevant to repair, qualification, and continuation projects for deployed fiber-optic equipment built around this Micrel limiting postamplifier. Its defined supply range, 3.2 Gbps data rate, CML interface, and 16-MLF footprint allow an existing receiver design to be serviced without changing the receiver architecture. Procurement should account for end-of-life inventory variability and specify whether tube, tray, or tape-and-reel handling is required. For long-term maintenance programs, request visibility into remaining inventory and a qualified migration path rather than assuming continuous supply.

What is the SY88773VMG used for?
The SY88773VMG is a 3.2 Gbps limiting postamplifier IC used in optical-network receivers to amplify incoming high-speed signals and provide constant-amplitude CML output. According to the Micrel Semiconductor datasheet, the device also supports programmable gain, input fault detection, and an enable or shutdown function, making it suitable for receiver signal conditioning before clock-and-data recovery or digital logic.
What is the operating voltage of the SY88773VMG?
The SY88773VMG operates from 3.3 V to 5 V. The listed maximum supply voltage is 5.5 V, so a 5 V rail must remain below that absolute limit, including transient overshoot. According to the Micrel Semiconductor datasheet, the wide operating range supports both lower-voltage optical-module designs and conventional 5 V receiver architectures.
What data rate does SY88773VMG support?
The SY88773VMG supports data rates up to 3.2 Gbps. According to the Micrel Semiconductor datasheet, it is a CML limiting postamplifier intended for high-speed optical-network receiver paths. Its signal-limiting behavior helps provide a controlled output amplitude when the incoming signal exceeds the intended operating range.
Where can I download the SY88773VMG datasheet PDF?
The SY88773VMG datasheet is available through the Micrel Semiconductor document link listed on this page. The document describes the 3.2 Gbps limiting postamplifier, 3.3 V to 5 V operating range, programmable gain mode, input fault detection, shutdown control, and 16-MLF package. Use the manufacturer pin-description table when assigning PCB signals.
Where can I find the SY88773VMG pinout?
The SY88773VMG pinout is defined in the Micrel Semiconductor datasheet and is presented in a 16-MLF package with an exposed pad. Pin assignments, exposed-pad connections, and test-point requirements must be taken directly from the datasheet. The exposed pad is not an interchangeable routing location without confirming its prescribed electrical and thermal connection.
Is SY88773VMG still active?
The SY88773VMG is listed for end-of-life status by Micrel Semiconductor. The manufacturer notice identifies the catalog part number among products moving to EOL. Engineers should therefore treat new production designs as constrained and use Microchip's cross-reference search to identify a supported replacement before committing a new optical receiver platform.
What is the best drop-in replacement for SY88773VMG?
No confirmed drop-in replacement is established for the SY88773VMG by the available cross-reference results. The identified SY88773VMG-TR designation represents a tape-and-reel ordering form of the same device rather than a distinct functional replacement. For an EOL design, request a production-availability recommendation through the Request a Quote form and verify any proposed replacement against data rate, supply voltage, logic interface, and package pins.
Can SY88773VMG-TR replace SY88773VMG?
The SY88773VMG-TR can use the same electrical design as the SY88773VMG because it has consistent performance characteristics, terminals, and package configuration. The TR suffix denotes tape-and-reel packaging rather than a different functional device. Availability should still be checked because both base and reel-order variants are affected by the manufacturer's end-of-life notice.
What can replace an EOL SY88773VMG?
An EOL SY88773VMG replacement must match the 3.2 Gbps data rate, 3.3 V to 5 V supply range, CML interface, limiting behavior, control functions, and 16-MLF footprint. No independently verified drop-in candidate is identified here. Use Microchip's cross-reference search and the Request a Quote form to obtain a supported recommendation, then review the candidate datasheet before redesigning the PCB.
When should I choose SY88773VMG over another limiter?
Choose the SY88773VMG when an existing 16-MLF optical-receiver design specifically requires its 3.2 Gbps limiting postamplifier, programmable gain mode, input fault detection, and shutdown control. Do not select it for a new production platform without confirming lifecycle support. A currently supported receiver IC with matching CML levels and timing is generally more appropriate for an active design.
Is the SY88773VMG suitable for 10G optical networks?
The SY88773VMG is suitable for receiver designs whose relevant channel operates at or below 3.2 Gbps, including legacy multi-gigabit optical-network applications. The 10 Gbps label commonly associated with the broader optical-module generation should not be confused with the IC's own 3.2 Gbps data-rate rating. Confirm the per-lane signaling rate and required gain bandwidth in the system specification.
How should I decouple the SY88773VMG power supply?
Place the required supply-decoupling capacitors immediately adjacent to the device's supply and ground pins, following the Micrel Semiconductor layout guidance. Keep the high-speed CML traces short, provide a continuous ground reference, and connect the exposed pad as prescribed. Estimated layout-dependent ringing or supply-noise margin should be evaluated with measurement because values depend on PCB geometry and surrounding circuitry.
Where can I buy SY88773VMG online?
Use the Request a Quote form on this page to request the SY88773VMG and current procurement status. Because the device is identified as end-of-life, stock and lead time can vary by remaining inventory and packaging form. A purchasing request should specify the required package form and the quantity needed for production, prototype, or repair quantities.
What is the price of SY88773VMG?
Current SY88773VMG commercial terms should be obtained through the Request a Quote form on this page. The structured price record on this page is maintained separately because market availability may change for an end-of-life component. For production planning, request quantity breaks, remaining-inventory allocation, supported alternative options, and the required packaging form with the quotation.
What is the lead time for SY88773VMG?
The current lead time for SY88773VMG depends on remaining end-of-life inventory and the requested quantity. Use the Request a Quote form on this page to confirm allocation and delivery timing. For maintenance quantities, identify the original package form and annual usage; for a new design, also request a supported replacement because regular production supply is not appropriate for an EOL device.
What are the key specifications of SY88773VMG that engineers should know?
The key SY88773VMG specifications are a 3.2 Gbps maximum data rate, 3.3 V to 5 V supply range, CML output, constant-amplitude limiting behavior, programmable gain mode, input fault detection, and enable or shutdown control. The package is 16-MLF, measuring 3 x 3 x 0.9 mm according to the Micrel Semiconductor datasheet, and the device is intended for optical-network receivers.
Is the Microchip SY88773VMG equivalent to other limiting postamplifiers?
The SY88773VMG is functionally equivalent only to parts that reproduce its 3.2 Gbps data rate, CML output, 3.3 V to 5 V supply range, limiting response, gain-control method, fault-detection behavior, and 16-MLF pinout. No verified cross-brand equivalent is identified here. Similar amplifier functions are insufficient unless the complete interface and package match.

Impormasyon ng Talumpati sa Engineering for SY88773VMG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the SY88773VMG when maintaining an existing optical receiver that specifically uses its 3.2 Gbps CML limiting postamplifier, programmable gain mode, input fault detection, shutdown control, and 16-MLF footprint. It is not the preferred choice for a new production design because the manufacturer identifies the catalog part number as end-of-life. For new designs, select a currently supported receiver IC whose data rate, supply range, CML levels, fault logic, and footprint satisfy the complete system requirements. Do not treat the SY88773VMG-TR tape-and-reel ordering form as a distinct upgrade. For repairs and controlled continuation, request remaining inventory, packaging details, and lifecycle timing through the Request a Quote form, then verify any proposed migration against the original receiver schematic and layout.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 16-MLF (3 x 3 mm)
Brand Microchip Technology
Device Type Limiting postamplifier IC
Data Rate 3.2 Gbps
Supply Voltage Range 3.3 V to 5 V
Maximum Supply Voltage 5.5 V
Output Interface CML
Output Behavior Signal limiting with constant-amplitude output
Gain Mode Programmable gain mode
Special Features Input fault detection and enable or shutdown function

Pangunahing mga Pagkakaiba

  • Integrated receiver-control functions (kumpara saGeneral-purpose limiting amplifier)
  • Wide receiver-supply compatibility (kumpara saFixed 5 V receiver amplifier)
  • Compact high-speed implementation (kumpara saLarger discrete limiting stage)

Talaan ng Disenyo

Treat the CML differential pair as a controlled-impedance connection rather than a generic low-frequency output route. Match trace length and geometry where practical, minimize vias, and preserve a continuous reference plane beneath the pair. Keep the input, output, and supply connections short because edge-rate harmonics extend well beyond the nominal 3.2 Gbps data rate and can magnify small discontinuities into reflection or jitter problems.

Decouple the supply pins directly at the package and use the capacitor values and placement prescribed by the Micrel Semiconductor datasheet. Check the 5.5 V maximum supply rating against rail tolerance and startup overshoot; a nominal 5 V source can exceed the limit during transient conditions. A shutdown or enable sequence should prevent the amplifier from being enabled while the supply is outside its valid operating range.

Use the exposed pad as specified for both electrical connection and thermal dissipation. Place uninterrupted ground and thermal-via geometry beneath the package where the manufacturer layout pattern permits, while avoiding voids in the return path. Estimated junction temperature depends on actual supply voltage, load, ambient temperature, copper area, and via count, so perform a board-level thermal calculation rather than assuming the compact package eliminates heating.

Validate the complete receiver chain with eye, jitter, and fault-detection measurements across expected input amplitude, channel loss, temperature, and supply tolerances. Programmable gain changes the operating point, so it should be set using system-level eye-margin criteria instead of maximum output amplitude alone. Also verify behavior during input loss and signal-overrun conditions, because the limiting function can mask amplitude changes unless the fault path is interpreted correctly.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated in the product listings.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

SY88773VMG datasheet SY88773VMG datasheet pdf SY88773VMG pinout SY88773VMG specifications SY88773VMG equivalent SY88773VMG replacement SY88773VMG cross reference SY88773VMG footprint Microchip SY88773VMG SY88773VMG application circuit SY88773VMG price SY88773VMG stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology Micrel Semiconductor SY88773VMG SY88773VMG-TR limiting postamplifier limiting amplifier postamplifier receiver amplifier CML output optical network optical receiver clock and data recovery constant-amplitude output programmable gain mode input fault detection enable and shutdown 3.2 Gbps data rate 3.3 V to 5 V supply 16-MLF package 3 x 3 x 0.9 mm package surface-mount IC QFN package family fiber-optic interface signal limiting
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ