Microchip Technology

SY88893VKC - 155Mbps PECL Limiting Postamplifier | Microchip

MPN: SY88893VKC ✓ Nakahanda
3.3 V or 5 V Vdss 10-MSOP Package
MOQ: 1 |

SY88893VKC Ulas

The Microchip Technology SY88893VKC is a low-power limiting postamplifier designed for 155 Mbps PECL optical-network signals, with a 10-MSOP package and operation from a single 3.3 V or 5 V supply. It combines differential PECL data outputs with a TTL-compatible signal-detect output and a TTL enable input, making it suitable for restoring degraded high-speed digital waveforms before routing them into an optical transceiver or network processor.

A limiting postamplifier is a specialized amplifier IC that receives a low-amplitude or logic-threshold electrical signal, amplifies it, and squares it into a usable digital output. Within the signal-chain hierarchy, this device sits between a photodetector or other low-level source and a high-speed PECL interface. Its principal role is waveform conditioning rather than analog amplification, so predictable rise and fall behavior, input overload tolerance, and signal-loss detection are more important than wide-band audio-style fidelity.

The SY88893VKC supports data rates up to 155 Mbps from either a 3.3 V or 5 V supply. Low-noise PECL outputs reduce the likelihood that upstream switching noise or accumulated channel loss will corrupt the recovered data stream. The chatter-free TTL signal-detect output indicates loss of input signal, while the TTL enable input allows the amplifier to be disabled when the receiver is inactive or the optical link is being initialized.

The limiting stage compensates for attenuation in the optical receiver path and converts a small differential signal into full PECL levels suitable for high-speed logic. This architecture supports the common 155 Mbps SONET/SDH class of optical interfaces, where repeatable threshold recovery and reliable loss-of-signal indication are important for link monitoring and failover behavior.

Typical applications include SONET optical receivers, packet-over-sonnet equipment, telecommunications line cards, optical network terminals, and clock-recovery front ends. The same functions are useful in test equipment and instrumentation that must translate a degraded high-speed differential signal into standardized PECL outputs.

For PCB design, keep PECL traces short, provide a continuous reference plane, and use controlled-impedance routing between the amplifier and transceiver. Decoupling capacitors should connect directly to the supply and ground pins with minimal loop length. Avoid sharing noisy return-current paths with the high-speed input and outputs.

This page combines the device function, application guidance, comparison information, and replacement guidance needed to evaluate the SY88893VKC within a 155 Mbps PECL receiver design.

Mga alternatibo na pwedeng ilagay na SY88893VKC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

SY88893VKC Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Limiting postamplifier
Maximum Data Rate 155 Mbps
Volte ng Pagbibigay 3.3 V or 5 V
Output Signal Type PECL
Signal Detect Output TTL
Enable Input TTL
Signal Detect Behavior Chatter-free
Application Optical networks
Packhaging 10-MSOP
Package Width 3.00 mm
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng SY88893VKC 3.00 mm

Pin configuration para sa SY88893VKC (3.00 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 3.00 mm package para sa SY88893VKC

Wala ng detalyadong pinout data na magagamit para sa SY88893VKC.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

SY88893VKC ay nararapat para sa 6 aplikasyons: SONET Optical Receiver, Packet-Over-SONET Equipment, Optical Network Terminal, Telecommunications Line Card, High-Speed Instrumentation, Optical Link Test Equipment.

🌐

SONET Optical Receiver

The SY88893VKC is suited to the signal-recovery stage of a 155 Mbps SONET optical receiver because it amplifies a small differential waveform and restores it to PECL logic levels. It accepts operation from a 3.3 V or 5 V supply, matching many optical-transceiver rails, while the chatter-free TTL signal-detect output can supervise the receive path. The 10-MSOP footprint helps keep the high-speed amplifier close to the photodetector or transceiver, reducing trace length and sensitivity to added loss. Board designers should still verify input thresholds, PECL biasing, output levels, and signal-detect timing against the manufacturer datasheet.

🌐

Packet-Over-SONET Equipment

The SY88893VKC can condition a 155 Mbps differential signal in packet-over-sonet equipment that translates recovered optical data into a standardized PECL interface. Its limiting action is appropriate for digital threshold recovery rather than linear waveform reproduction, and its TTL enable input gives system logic control during initialization. The 3.3 V or 5 V operating choices allow integration near either legacy 5 V or lower-voltage transceiver sections. Keep the input and differential output paths over controlled-impedance ground planes, and place power-decoupling capacitors at the device pins to prevent supply bounce from disturbing the recovered data stream.

🖥️

Optical Network Terminal

In an optical network terminal, the SY88893VKC provides the limiting-amplifier stage between the receive optical device and high-speed processing logic. Its 155 Mbps rating aligns with the stated operating class, while low-noise PECL outputs support consistent logic detection after attenuation. The TTL signal-detect output offers a separate receiver-status indication that can be routed to supervisory logic, and chatter-free operation helps reduce repeated threshold transitions. Designers should use the manufacturer pinout to assign supply, ground, enable, detect, and differential data pins, and should preserve short return paths beneath the high-speed traces.

🏭

Telecommunications Line Card

The SY88893VKC fits telecommunications line cards that receive a weakened differential waveform and need deterministic recovery into PECL signals. Its low-power 10-MSOP construction limits board area beside the optical front end, and operation from either 3.3 V or 5 V supports mixed-generation line-card architectures. The TTL enable function can coordinate amplifier state with link startup, while the TTL signal-detect result can assist fault monitoring. Layout quality remains critical because a limiting amplifier cannot compensate for uncontrolled impedance discontinuities, long stubs, or poorly referenced return paths. Validate the complete receiver chain with the intended transceiver and optical attenuation.

🔧

High-Speed Instrumentation

The SY88893VKC can be used in instrumentation that receives or generates low-amplitude 155 Mbps differential signals and needs standardized PECL outputs with link-state reporting. The limiting amplifier is more appropriate than a general-purpose analog amplifier when the goal is threshold recovery and digital compatibility. Its enable input supports controlled test sequences, while signal detect can confirm whether the source is active. The 10-MSOP package requires careful high-speed layout, including short interconnects, uninterrupted reference planes, and minimal decoupling loops. Confirm signal amplitude and common-mode compatibility before applying the device outside an optical-network receive path.

🖥️

Optical Link Test Equipment

The SY88893VKC can serve as the receive-conditioning element in optical link test equipment exercising a 155 Mbps PECL interface. Its signal-detect output gives the test system a direct indication of input presence, and its enable input allows the amplifier to remain inactive until a test is ready. Operating from 3.3 V or 5 V supports adaptable test fixtures and legacy instrument architectures. For repeatable results, provide low-inductance decoupling, route differential signals over a continuous ground reference, and maintain the interface levels specified by the manufacturer datasheet. This device supports digital-link testing but is not a general-purpose analog measurement amplifier.

What is the SY88893VKC?
The SY88893VKC is a Microchip Technology low-power limiting postamplifier for 155 Mbps PECL optical-network interfaces. According to the manufacturer datasheet, the device operates from a single 3.3 V or 5 V supply, provides PECL data outputs, and includes a chatter-free TTL signal-detect output plus a TTL enable input. It is packaged in a 10-MSOP surface-mount package.
What is the operating voltage of SY88893VKC?
The SY88893VKC operates from either a 3.3 V or 5 V single supply. The manufacturer datasheet identifies these as the supported supply conditions for operation up to 155 Mbps. Use the same supply voltage consistently for the PECL interface and biasing network so that output levels and receiver thresholds remain compatible with the surrounding optical-transceiver circuitry.
What is the maximum data rate of SY88893VKC?
The maximum specified data rate is 155 Mbps. According to the Micrel Semiconductor manufacturer datasheet, the SY88893VKC is a low-power limiting postamplifier designed for 155 Mbps PECL data paths. The limiting architecture reconstructs a valid digital waveform after attenuation in a receiver channel and supplies differential PECL outputs for downstream high-speed logic.
Where can I download the SY88893VKC datasheet PDF?
The manufacturer datasheet is the authoritative document for the SY88893VKC pinout, electrical characteristics, and application circuit. A manufacturer-hosted PDF link is not currently exposed on this product page, so use the official Microchip product documentation area to locate the SY88893 datasheet before assigning pins or setting PECL biasing. The manufacturer designation is Micrel Semiconductor for this legacy device.
Where can I find the SY88893VKC pinout?
Use the pin-description table and package drawing in the Micrel Semiconductor SY88893 manufacturer datasheet to identify all 10 pins of the 10-MSOP. The functional block description identifies PECL data outputs, TTL signal detect, TTL enable, supply, and ground connections, but it does not provide a complete numbered pin map on this page. Confirm the physical pin numbering before PCB layout or replacement work.
What does the TTL signal-detect output on SY88893VKC do?
The TTL signal-detect output indicates whether a valid input signal is present at the limiting amplifier. According to the manufacturer datasheet, the output is designed to operate chatter-free, which helps avoid repeated transitions as a signal approaches the detection threshold. It can supervise receiver state, loss-of-signal monitoring, or an upstream failover controller.
Why is the SY88893VKC enable input useful?
The TTL enable input allows the receiver amplifier to be disabled or enabled under system control. According to the manufacturer datasheet, this pin supports a TTL interface, making it suitable for connection to standard digital control logic. It is useful during link initialization, test modes, or designs that need to suppress signal activity while the optical subsystem is not ready.
What can replace the SY88893VKC?
A direct replacement must preserve the 10-MSOP footprint, pin functions, 3.3 V or 5 V supply operation, 155 Mbps data-rate capability, PECL outputs, and TTL control interface. No confirmed drop-in equivalent is listed for this device, so do not treat a functionally similar postamplifier as a substitute without checking the manufacturer pinout and electrical characteristics. The SY88893VKC-TR ordering code is a packaging variant rather than a different circuit.
Is SY88893VKC pin-compatible with SY88933VKITR?
The SY88893VKC and SY88933VKITR are not established as pin-compatible replacements. A comparison source describes their functional characteristics as similar while noting inconsistencies in the main parameters and possible circuit changes. Because the SY88893VKC is a 10-MSOP device and SY88933VKITR uses a different 8-pin package indication, board replacement requires footprint and pin-function verification rather than a simple substitution.
What is the difference between SY88893VKC and SY88893VKC-TR?
SY88893VKC and SY88893VKC-TR identify the same SY88893 limiting-postamplifier function and 10-MSOP package, with the suffix distinguishing the orderable packaging or shipping configuration. The TR version is associated with tape-and-reel ordering. For PCB compatibility, the important checks remain the 10-MSOP footprint and the manufacturer pinout, not the ordering suffix.
When should I choose the SY88893VKC for an optical receiver?
Choose the SY88893VKC when the receiver path needs to recover a 155 Mbps differential signal, provide PECL-compatible outputs, and report loss of signal through a chatter-free TTL output. Its 3.3 V or 5 V supply flexibility also suits mixed-signal optical-interface boards. Confirm that the system uses the same data rate, voltage levels, enable convention, and 10-MSOP footprint before finalizing the design.
Is the SY88893VKC suitable for 155 Mbps optical networks?
The SY88893VKC is specifically suited to 155 Mbps optical-network receiver paths. According to the manufacturer datasheet, it is a low-power limiting postamplifier with PECL outputs, TTL enable, and chatter-free TTL signal detect. These functions directly support recovered-data conditioning and link-status supervision in SONET-class equipment, although board-level signal-integrity and margin testing remains essential.
What are the key specifications of SY88893VKC that engineers should know?
The key SY88893VKC specifications are 155 Mbps maximum operation, single 3.3 V or 5 V supply, low-power PECL outputs, TTL enable, chatter-free TTL signal detect, and a 10-MSOP package. The Micrel Semiconductor manufacturer datasheet positions the device as a limiting postamplifier for optical networks. Its core value is reliable waveform recovery and link-state indication rather than general-purpose analog amplification.
Where can I buy SY88893VKC and check its lead time?
Use the Request a Quote form on this page to request SY88893VKC availability, current lead time, minimum order quantity, and the required orderable packaging code. The manufacturer datasheet and current catalog listings confirm the device and its 10-MSOP format, but live stock and delivery schedules can change. Request a formal quotation for the exact MPN and quantity needed.
What is the best Microchip equivalent for SY88893VKC?
No separate Microchip equivalent is established as a pin-compatible drop-in replacement for the SY88893VKC in the available cross-reference information. The SY88893VKC-TR is the closest orderable form because it retains the same circuit and 10-MSOP package, differing primarily in packaging notation. Treat that as a same-device ordering option, not a distinct amplifier with different electrical performance.

Impormasyon ng Talumpati sa Engineering for SY88893VKC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the SY88893VKC for a 155 Mbps optical receiver that requires PECL-compatible recovered outputs, a separate TTL signal-detect indication, and TTL enable control in a compact 10-MSOP package. Its 3.3 V or 5 V supply flexibility makes it appropriate for systems using either rail, provided the surrounding interface levels match the datasheet. No independent drop-in alternative was confirmed, so new designs should use the SY88893 directly rather than rely on an unverified equivalent. The SY88893VKC-TR is appropriate when tape-and-reel procurement is required, but it is the same circuit rather than a different design. Before layout, confirm the manufacturer pinout, input thresholds, enable polarity, signal-detect timing, PECL output levels, and external biasing requirements. If the receiver operates above 155 Mbps or requires a different package, select a purpose-designed postamplifier instead.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Microchip Technology
Package 10-MSOP
Product Type Limiting postamplifier
Maximum Data Rate 155 Mbps
Supply Voltage 3.3 V or 5 V
Output Signal Type PECL
Signal Detect Output TTL, chatter-free
Enable Input TTL
Primary Application 155 Mbps optical networks

Pangunahing mga Pagkakaiba

  • Integrated receiver monitoring and control (kumpara saGeneric PECL limiting amplifiers)
  • Flexible single-rail operation (kumpara sa5 V-only optical postamplifiers)
  • Compact optical receiver footprint (kumpara saLarger-package discrete limiter networks)

Talaan ng Disenyo

Route the differential input and PECL output paths as short, controlled-impedance traces over a continuous reference plane. Avoid trace stubs, unnecessary vias, and splits in the ground plane beneath the 10-MSOP. A limiting amplifier depends on repeatable threshold behavior, so uncontrolled reflections or return-path discontinuities can create data errors even when the amplifier itself operates correctly.

Connect the supply bypass capacitor directly between the SY88893VKC power and ground pins, and use the shortest possible ground connection. Keep switching-regulator and digital return currents away from the input-reference and output-return paths. Because the device supports 3.3 V or 5 V operation, verify that the selected bypass capacitance and routing remain suitable for the actual supply range and PECL interface levels.

Do not treat SY88893VKC and SY88893VKC-TR as electrically different amplifier designs; the ordering suffix represents packaging or shipment form. Conversely, do not substitute a similar postamplifier solely by function. Confirm the 10-MSOP footprint, numbered pins, supply pins, PECL input thresholds, enable polarity, signal-detect logic, and output levels against the manufacturer datasheet before approving a replacement.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this legacy Micrel Semiconductor device. AEC-Q100 is not applicable to this optical-network amplifier.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

SY88893VKC datasheet SY88893VKC pinout SY88893VKC datasheet pdf SY88893VKC specifications SY88893VKC equivalent SY88893VKC replacement SY88893VKC cross reference SY88893VKC 10-MSOP footprint SY88893VKC 155Mbps PECL amplifier SY88893VKC optical receiver SY88893VKC price SY88893VKC stock Microchip SY88893VKC SY88893VKC vs SY88933VKITR

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology Micrel Semiconductor SY88893VKC SY88893VKC-TR SY88933VKITR limiting postamplifier postamplifier special-purpose amplifier amplifier IC semiconductor PECL TTL 155 Mbps optical network SONET signal detect enable input low-power amplifier 3.3 V power supply 5 V power supply 10-MSOP MSOP package family surface-mount package controlled-impedance routing high-speed digital signal
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ