WM8731SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8731SEDS/RV ✓ NakahandaWM8731SEDS/RV Ulas
An audio codec is an interface IC that converts digital audio data into an analog audio signal and converts analog audio into a digital stream. In the product hierarchy, the WM8731 belongs to audio codecs, interface ICs, and broader semiconductor signal-processing devices. Its integrated headphone-driver capability combines digital-to-analog and analog-to-digital conversion with headphone-output support in one package.
The WM8731SEDS/RV is listed as a 24-bit serial audio interface in a 28-pin SSOP package. The 208 mil package designation is a mechanical body-width classification, while the 28-pin arrangement provides the physical interface for power, digital audio, analog audio, microphone, and headphone-related functions. The 2.7 V to 3.6 V operating range is appropriate for compact, low-voltage digital audio systems.
Its 24-bit resolution is the principal data-format characteristic identified in the manufacturer listings. Digital audio systems use this resolution to represent each sample across a defined numerical range, while the serial interface transfers encoded audio between the codec and a host controller. Integrated headphone drive reduces the number of separate external output-path components when the supported output topology is appropriate for the design.
Typical design roles include portable media players, digital audio consoles, headset interfaces, and embedded systems that require one IC to handle stereo playback and recording. The industrial -40°C to +85°C temperature range supports operation across industrial and commercial ambient conditions, although individual subsystem requirements must still be checked.
Designers should use the pin-description table and reference application circuit in the Cirrus Logic manufacturer datasheet when assigning SSOP-28 routes, selecting bypass capacitors, and connecting analog and digital grounds. The 2.7 V minimum and 3.6 V maximum supply limits should be enforced across supply tolerance, startup, and load-transient conditions.
This page organizes the exact WM8731SEDS/RV ordering code with package, environmental, sourcing, replacement, and application guidance. It also distinguishes the verified orderable variant from unavailable cross-brand equivalents, helping engineers make a footprint-compatible decision without confusing similar codec functions with true drop-in interchangeability.
Mga alternatibo na pwedeng ilagay na WM8731SEDS/RV — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok WM8731SEDS/RV (parehas na form factor at footprint) — pagkakaiba sa Headphone Driver.
WM8731SEDS/V
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →WM8731SEDS/RV Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Stereo audio codec with headphone driver |
| Converter Resolution | 24 bit |
| Digital Audio Interface | 24-bit serial interface |
| Supply Voltage na Operasyon | 2.7 V to 3.6 V |
| Temperature na Operasyon | -40°C to +85°C |
| Package Type | SSOP-28 |
| Package Width | 208 mil |
| Bilang ng Pin | 28 pins |
| Uri ng Pagpapasok | Surface mount |
| Headphone Driver | Integrated |
| Audio Channel Configuration | Stereo |
| Codec Functions | Audio coder and decoder |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng WM8731SEDS/RV 208 mil
Pin configuration para sa WM8731SEDS/RV (208 mil package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa WM8731SEDS/RV.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
WM8731SEDS/RV ay nararapat para sa 6 aplikasyons: Portable Digital Audio Player, Headset Recording and Playback Interface, Embedded Audio Control Console, Industrial Audio Terminal, Digital Audio Accessory, Multimedia Controller Daughtercard.
Portable Digital Audio Player
The WM8731SEDS/RV fits portable digital audio players because its 24-bit serial interface carries high-resolution digital samples while the integrated headphone driver supports a compact analog playback path. Its 2.7 V to 3.6 V operating range is suitable for systems powered from a regulated low-voltage rail. The 28-pin SSOP package also allows a relatively compact implementation, although board-space savings must be assessed against connector, filtering, and microphone circuitry. Designers should follow the manufacturer reference layout to keep the headphone and microphone paths away from digital switching nodes.
Inirekomenda
Headset Recording and Playback Interface
The WM8731SEDS/RV is suited to a headset interface that must both capture a microphone signal and drive stereo headphones. Its 24-bit codec resolution establishes the digital sample format, while the integrated headphone-driver function consolidates the playback path into one 28-pin SSOP device. The 2.7 V minimum operating voltage fits low-voltage portable electronics, and the -40°C to +85°C rating supports wider commercial or industrial environments. Headset impedance, microphone bias, plug detection, and grounding should be designed using the manufacturer application guidance.
Inirekomenda
Embedded Audio Control Console
An embedded audio control console can use the WM8731SEDS/RV when the host processor communicates over a serial audio link and the product requires integrated headphone drive. The 24-bit interface supports digital audio transfer, while the 2.7 V to 3.6 V supply range aligns with common embedded low-voltage rails. The SSOP-28 package provides 28 physical connections for analog, digital, and power functions. For consoles with multiple outputs or long cable runs, designers should add appropriate output buffering and protection rather than treating the codec as an unrestricted line driver.
Inirekomenda
Industrial Audio Terminal
The WM8731SEDS/RV can support industrial audio terminals where local headphone monitoring or digital voice playback is required within a -40°C to +85°C ambient range. Its integrated headphone driver reduces the component count of the output stage, while the 24-bit serial format permits direct connection to a suitable audio controller. The 2.7 V to 3.6 V supply range requires a regulator that remains within limits during startup and load changes. Industrial qualification of the finished product also requires enclosure, EMC, surge, and isolation assessment beyond the codec specifications.
Inirekomenda
Digital Audio Accessory
The WM8731SEDS/RV is appropriate for a digital audio accessory that connects a host controller to analog headphones or microphones. The device combines a 24-bit serial codec interface with an integrated headphone driver in one SSOP-28 package, reducing board area compared with a discrete converter and output-amplifier arrangement. Its 2.7 V to 3.6 V operating range supports compact USB- or battery-derived rails when regulation is properly designed. The interface should include the decoupling, analog filtering, and grounding shown in the manufacturer reference circuit.
Inirekomenda
Multimedia Controller Daughtercard
The WM8731SEDS/RV can be used on a multimedia daughtercard when a processor-based system needs local stereo playback and recording. Its 24-bit serial interface supports digital audio transfer, and the integrated headphone driver provides a practical output stage for line and headphone connections. The 28-pin SSOP footprint can simplify routing across a single-layer or two-layer daughtercard when compared with several separate analog devices. Keep the codec supply quiet, provide local decoupling, and separate microphone and headphone return paths from processor clocks and switching regulators.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for WM8731SEDS/RV — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | WM8731SEDS/V |
|---|---|---|
| Package | SSOP-28, 208 mil | SSOP-28, 208 mil |
| Brand | Cirrus Logic | Cirrus Logic |
| Converter Resolution | 24 bit | 24 bit |
| Digital Audio Interface | 24-bit serial | 24-bit serial |
| Operating Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C |
| Headphone Driver | Integrated | Integrated |
| Audio Configuration | Stereo | Stereo |
| Order-Code Suffix | /RV | /V |
Pangunahing mga Pagkakaiba
- Exact target order code with integrated headphone drive (kumpara saWM8731SEDS/V)
- Low-voltage operation for portable audio systems (kumpara saWM8731SEDS/V)
- Industrial commercial temperature coverage (kumpara saWM8731SEDS/V)
Talaan ng Disenyo
Use the manufacturer reference circuit for bypass-capacitor placement and values, and keep the codec supply within 2.7 V to 3.6 V under startup and maximum audio-load conditions. Place the local supply capacitor beside the relevant power and ground pins with a short return path. If the codec is powered from a switching regulator, verify the allowed ripple and transient response rather than assuming the nominal 3.3 V rail is sufficient.
Separate the headphone, microphone, and analog audio routes from digital clock and serial-data traces. Follow the manufacturer pinout and layout example for SSOP-28 placement, connect the analog ground reference as directed, and keep switching-regulator and high-current return paths away from the audio input region. The integrated headphone driver can reduce external circuitry, but poor return-current routing can still degrade the resulting audio performance.
Treat the serial audio interface as a clocked digital signal even though its nominal resolution is 24 bits. Route it with continuous reference to the codec and source device, avoid unnecessary stubs, and confirm the interface voltage levels and clocking requirements in the manufacturer datasheet. For microphone inputs, follow the documented input-bias, anti-aliasing, and grounding arrangement to prevent channel imbalance and added noise.
Impormasyon ng Pagsunod sa Kautusan
The component listing identifies WM8731SEDS/RV as RoHS compliant. No explicit REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.