WM8776SEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8776SEFT/V ✓ NakahandaWM8776SEFT/V Ulas
An audio codec is an integrated circuit that converts analog audio signals into digital PCM data and converts digital playback data back into analog audio. A stereo codec handles two audio channels, while an integrated input multiplexer selects among several physical inputs. The WM8776SEFT/V combines those functions in one device, reducing the number of separate signal-routing and conversion components required in a compact audio subsystem.
The principal device ratings include 24-bit resolution, a maximum sample rate of 192 kHz, stereo operation, and a five-channel input multiplexer. Its analog supply range of 2.7 V to 5.5 V accommodates conventional analog signal-chain power levels, while its 2.7 V to 3.6 V digital supply range supports digital interfaces operating within the stated range. These features make the codec applicable to consumer audio equipment, multimedia systems, and other products requiring stereo recording or playback.
The WM8776 family is identified in technical documentation as the Stereo CODEC with 5 Channel I/P Multiplexer. Its active operating-temperature range is -25°C to 85°C. The 48-TQFP package provides 48 external connection positions and a 7 mm by 7 mm body footprint, allowing placement in a conventional surface-mount PCB design while maintaining access to power, data, clock, and analog-audio connections.
Typical uses include digital recording systems, compact stereo playback equipment, multimedia convergence products, and mixed-signal audio control platforms. The five-channel multiplexer is particularly useful when a design must choose among several analog sources without adding multiple analog switch packages. The 192 kHz capability also supports high-rate audio processing where the surrounding converter, clocking, and signal-chain circuitry supports the same operating rate.
Design work should begin with the manufacturer pin-description and application information because the exact analog input selection, digital interface, clock requirements, and external component recommendations depend on the complete board architecture. Verify signal levels and supply sequencing before connecting external circuitry, and use the pin-description table rather than package position alone when assigning PCB tracks.
This product page organizes the documented codec capabilities, operating ranges, package information, sourcing path, and engineering guidance into a practical engineering reference. It also identifies where an equivalent part must be reviewed for true pin compatibility instead of being selected solely from similar audio-converter specifications.
Mga alternatibo na pwedeng ilagay na WM8776SEFT/V — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
WM8776SEFT/RV
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
WM8776SEFT/V Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Stereo audio codec with input multiplexer |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Audio Channel Count | 2-channel stereo |
| Input Multiplexer Channels | 5 channels |
| Analog Supply Voltage Range | 2.7 V to 5.5 V |
| Digital Supply Voltage Range | 2.7 V to 3.6 V |
| Hanay ng Temperature na Operasyon | -25°C to +85°C |
| Package Type | 48-pin TQFP |
| Package Body Size | 7 mm x 7 mm |
| Uri ng Pagpapasok | Surface mount |
| Manufacturer | Cirrus Logic / Wolfson Microelectronics |
| Katayuan ng Lifecycle | Active |
Gabay sa Pin Configuration ng WM8776SEFT/V 7 mm x 7 mm
Pin configuration para sa WM8776SEFT/V (7 mm x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa WM8776SEFT/V.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
WM8776SEFT/V ay nararapat para sa 6 aplikasyons: Digital Audio Recording System, Stereo Playback Equipment, Multimedia Audio Hub, Consumer Audio Interface, Portable Media Device, High-Rate Audio Conversion.
Digital Audio Recording System
The WM8776SEFT/V suits digital recording systems that require simultaneous conversion and five analog input choices. Its 24-bit resolution and sampling-rate capability up to 192 kHz provide the core conversion functions for high-quality capture, while the integrated multiplexer can reduce the need for separate input-routing hardware. Place the codec near the analog input connector or preamplifier to minimize sensitive-signal trace length, and follow the manufacturer application circuit for input conditioning, grounding, and decoupling.
Stereo Playback Equipment
The WM8776SEFT/V can serve as the digital-to-analog conversion stage in compact stereo playback equipment. Its two-channel codec architecture supports conventional left and right playback paths, while the 192 kHz maximum rate covers high-rate source material when the clock and downstream output network support it. Keep analog outputs on a controlled, quiet layout and use the manufacturer's reference topology for the digital interface, output reconstruction, and supply connections.
Multimedia Audio Hub
A multimedia audio hub can use the WM8776SEFT/V when several analog sources must feed a common stereo processing path. The five-channel input multiplexer provides source selection within the codec, and the 24-bit conversion capability supports a compact mixed-signal design. Treat source selection and gain requirements as part of the analog design, verify that each selected channel supports the intended signal type, and confirm control behavior against the manufacturer register and pin documentation.
Consumer Audio Interface
The WM8776SEFT/V is appropriate for a consumer audio interface combining two-channel conversion with selectable analog inputs. Its 2.7 V to 5.5 V analog supply range and 2.7 V to 3.6 V digital supply range simplify integration with mixed voltage domains, although each rail must still meet its own timing and noise requirements. Follow the recommended decoupling network and expose only the required control signals in a low-cost design.
Portable Media Device
Portable media equipment benefits from the WM8776SEFT/V's combination of 24-bit stereo conversion, a five-channel multiplexer, and a compact 7 mm by 7 mm TQFP package. The integrated multiplexer can reduce board area when several analog sources share one codec. Power-budget the analog and digital supplies separately, validate startup behavior for the target battery range, and use short, shielded routing for microphone or line-level inputs to reduce noise pickup.
High-Rate Audio Conversion
The 192 kHz sampling-rate capability makes the WM8776SEFT/V relevant to high-rate audio conversion designs where preserving a broad frequency range is important. The 24-bit codec must be paired with a clean reference clock, appropriate signal bandwidth, and a digital interface capable of carrying the selected data rate. Review clock jitter, supported interface formats, and analog anti-aliasing requirements in the manufacturer datasheet before fixing the system architecture.
Impormasyon ng Talumpati sa Engineering for WM8776SEFT/V — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | WM8776SEFT/RV |
|---|---|---|
| Package | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) |
| Brand | Cirrus Logic | Cirrus Logic |
| Product Type | Stereo audio codec with input multiplexer | Stereo audio codec with input multiplexer |
| Converter Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Audio Channels | 2-channel stereo | 2-channel stereo |
| Input Multiplexer Channels | 5 channels | 5 channels |
| Analog Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Digital Supply Voltage Range | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Lifecycle Status | Active | Active |
Pangunahing mga Pagkakaiba
- Combines stereo conversion with integrated source selection (kumpara saWM8776SEFT/RV)
- Supports high-rate stereo conversion (kumpara saWM8776SEFT/RV)
- Compact mixed-signal integration (kumpara saWM8776SEFT/RV)
Talaan ng Disenyo
Keep the analog input paths short and place the WM8776SEFT/V close to the selected input source. Route microphone or line-level signals away from digital clock and interface traces, use a continuous ground reference, and avoid placing sensitive analog nodes beneath noisy digital routing. The five-channel multiplexer simplifies source selection, but it does not eliminate the need for proper impedance matching and grounding at each input.
Plan the analog and digital supplies as separate rails within their respective 2.7 V to 5.5 V and 2.7 V to 3.6 V limits. Place local bypass capacitors at the supply pins using the values and placement shown in the manufacturer application information. Verify startup, shutdown, and power-supply sequencing across the full system voltage range so that analog input signals do not exceed the device operating conditions during rail transitions.
Treat the codec clock as a high-speed digital signal even when the audio payload is modest. Use a low-jitter source, provide a continuous return path, and keep clock routing away from analog inputs. For 192 kHz operation, confirm that the complete signal chain—including clock generation, digital transport, analog filters, and output reconstruction—supports the intended bandwidth and jitter budget.
Do not select a replacement solely because it uses a 48-pin TQFP package. Compare the exact ordering suffix, operating-temperature limits, digital interface, clock requirements, control-register compatibility, analog performance, and qualification status. The WM8776SEFT/RV family relationship is a starting point for review, not proof that every system configuration can be changed without schematic and firmware adjustments.
Impormasyon ng Pagsunod sa Kautusan
The WM8776SEFT/V is a mixed-signal audio codec rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer’s current product documentation.