WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic
MPN: WM8941GEFL/RV ✓ NakahandaWM8941GEFL/RV Ulas
An audio codec is an interface integrated circuit that converts digital audio data to and from analog signals while supporting the clocks, control logic, and signal paths required by audio equipment. In the broader electronics hierarchy, an audio codec belongs to interface ICs, then to integrated circuits and semiconductors. A mono codec is particularly useful when the system processes one primary analog channel while still requiring digital audio conversion, speaker or headphone support, or an embedded video-related audio path.
The WM8941GEFL/RV is identified as a 24-bit device. Resolution alone does not determine the complete signal-chain performance: clock frequency, sample rate, analog front-end design, input and output impedance, dynamic range, distortion, and the selected operating mode also determine the achievable audio quality. Designers should therefore use the manufacturer datasheet and its recommended application circuit to select the appropriate filter, clock, decoupling, and output-stage components for the target audio bandwidth.
The 28-QFN package creates a compact implementation but places a high share of connections beneath the device body. This supports dense PCB layouts while making careful escape routing important. Input, output, supply, ground, clock, control, and exposed-pad connections must follow the manufacturer’s land pattern and layout guidance. Thermal performance also depends on the exposed pad, copper area, internal planes, and the thermal burden generated by the selected operating mode.
Typical design contexts include portable or embedded audio systems, multimedia devices, communication terminals, recording equipment, and other products requiring a compact mono audio conversion interface. In each case, the codec may sit between an audio source and a digital audio host, or between a digital audio engine and an analog transducer stage. Clock topology, grounding, signal routing, and startup behavior must be evaluated as a complete subsystem rather than as isolated component concerns.
The primary engineering consideration is integration without compromising signal integrity. Keep analog and digital return currents separated where practical, place required bypass capacitors close to their supply pins, route clocks away from sensitive audio inputs, and use the exposed-pad copper area for both electrical return and thermal spreading. The manufacturer’s reference configuration should also be followed for filtering, resistor values, and gain-dependent components.
This page consolidates the verified catalog identity, package information, sourcing guidance, compatibility limits, and practical implementation considerations for the WM8941GEFL/RV. It also distinguishes the observed device configuration from unverified electrical details, helping engineers evaluate the part without treating incomplete catalog data as a complete datasheet specification.
Mga alternatibo na pwedeng ilagay na WM8941GEFL/RV — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok WM8941GEFL/RV (parehas na form factor at footprint).
WM8941GEFL/V
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →WM8941GEFL/RV Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 24-bit mono audio codec |
| Catalog Classification | Audio/video buffer interface IC |
| Audio Processing | Mono codec |
| Converter Resolution | 24 bit |
| Package Type | 28-QFN |
| Package Dimensions | 4 mm x 4 mm |
| Uri ng Pagpapasok | Surface mount |
| Exposed Pad | Present in 28-WFQFN package description |
Gabay sa Pin Configuration ng WM8941GEFL/RV 4 mm x 4 mm
Pin configuration para sa WM8941GEFL/RV (4 mm x 4 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa WM8941GEFL/RV.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
WM8941GEFL/RV ay nararapat para sa 6 aplikasyons: Embedded Mono Audio Interface, Portable Audio Equipment, Multimedia Terminal Audio, Communication Audio Endpoint, Audio Recording Module, Industrial Audio Control Panel.
Embedded Mono Audio Interface
The WM8941GEFL/RV can serve as the mono audio conversion interface in an embedded product that receives or produces one digital audio channel. Its confirmed 24-bit converter format supports a conventional high-resolution audio data path, while the 4 mm by 4 mm 28-QFN package limits board area. The host processor still needs a compatible digital audio interface, master clock, and firmware configuration. Because supply voltage, sample-rate limits, and analog performance are not established by the catalog material, the manufacturer datasheet should be checked before selecting this codec.
Portable Audio Equipment
A portable audio product can use the WM8941GEFL/RV where a compact mono codec is sufficient and the system does not require simultaneous multichannel conversion. The 24-bit resolution and small 4 mm by 4 mm package make the part relevant to space-constrained portable electronics. Battery-powered implementations must additionally verify current consumption, shutdown behavior, supply range, and analog output efficiency. Those electrical details are not stated in the catalog excerpts and must be established from the manufacturer datasheet before the mechanical layout is finalized.
Multimedia Terminal Audio
The WM8941GEFL/RV is relevant to multimedia terminals requiring one processed mono audio channel and an integrated audio or video buffer-interface function. It can sit between a digital audio host and an analog input or output stage while the system handles media playback, recording, or communication audio. Clock-generation topology, sample-rate conversion requirements, and host data alignment must be reviewed carefully. The compact QFN package supports dense terminal designs but requires exact pin assignment and exposed-pad treatment from the manufacturer documentation.
Communication Audio Endpoint
A communications terminal or voice endpoint can use the WM8941GEFL/RV when a mono codec architecture is adequate for speech capture, playback, or line-level audio conversion. The 24-bit representation is suitable for digital audio transport, but end-to-end voice quality also depends on microphone or line-stage design, anti-alias filtering, clock jitter, and gain structure. Keep sensitive analog inputs away from digital and clock routing, and use the recommended application circuit to select filter and bypass components for the intended sample rate.
Audio Recording Module
The WM8941GEFL/RV can be evaluated for a compact mono recording module that converts one analog channel into a 24-bit digital stream for a host recorder. Its small 28-QFN package leaves board space for storage, isolation, and interface circuitry. Design work must account for input reference noise, gain distribution, anti-alias filter response, clock stability, and grounding. The catalog excerpts do not establish input impedance, dynamic range, or distortion, so those specifications must be verified before selecting microphone or line-input component values.
Industrial Audio Control Panel
An industrial control panel can use the WM8941GEFL/RV for alert tones, operator audio, or a single audio monitoring channel where mono conversion is sufficient. The 24-bit codec format and 4 mm by 4 mm package suit compact electronics, while an exposed-pad-based footprint helps conduct heat into the PCB. Industrial suitability requires checking the supported temperature range, supply tolerances, ESD strategy, and long-term availability against the manufacturer datasheet and ordering information before production commitment.
Impormasyon ng Talumpati sa Engineering for WM8941GEFL/RV — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | WM8941GEFL/V |
|---|---|---|
| Package | 28-QFN exposed pad, 4 mm x 4 mm | 28-QFN exposed pad family; exact drawing confirmation required |
| Brand | Cirrus Logic | Cirrus Logic |
| Device Type | 24-bit mono audio codec | Mono CODEC |
| Catalog Description | Audio, video buffer interface | Mono CODEC with speaker driver/video buffer |
Pangunahing mga Pagkakaiba
- Compact 24-bit mono conversion in a 4 mm by 4 mm package (kumpara saWM8941GEFL/V)
- Exact /RV production ordering identity (kumpara saWM8941GEFL/V)
- Audio and video buffer-interface catalog position (kumpara saWM8941GEFL/V)
Talaan ng Disenyo
Base the footprint on the exact manufacturer package drawing for the /RV ordering code, including the exposed pad and its dimensions. A 4 mm by 4 mm body leaves little room for fan-out errors, so confirm pad length, width, and spacing before releasing artwork. Provide adequate copper beneath the exposed pad for thermal spreading and follow the recommended via arrangement rather than adding vias solely for electrical reasons.
Separate analog input or output paths from digital audio data and clock routing to reduce coupling into sensitive audio signals. Keep required bypass capacitors close to the corresponding supply and ground pins, maintain a continuous return path, and place the clock source and decoupling components where their switching currents return to the device ground rather than through analog-signal regions. Use the reference layout as the baseline.
Do not treat the shared QFN family and similar product descriptions as proof that WM8941GEFL/V can replace WM8941GEFL/RV. Verify pin functions, exposed-pad connections, supply limits, clock requirements, register compatibility, and ordering conditions for both suffixes in the manufacturer documentation. Also avoid applying the /V ordering code when the production design has been released specifically around the /RV qualification or packing configuration.
The exposed pad should be tied and thermally coupled as specified by the manufacturer package documentation. Although the catalog does not provide thermal resistance or maximum power ratings, the exposed-pad copper and surrounding ground planes participate in heat removal. Review those limits at the highest intended supply voltage and audio operating mode, and preserve the recommended copper area even when the calculated dissipation appears low.
Impormasyon ng Pagsunod sa Kautusan
The catalog excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The /RV suffix should not be interpreted as an automotive qualification without confirmation from the manufacturer ordering information.