XC3S1500-4FGG676C - 1.5M Gate Spartan-3 FPGA | AMD
MPN: XC3S1500-4FGG676C ✗ Tapus ng BuhayXC3S1500-4FGG676C Ulas
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, while its parallel configurable cells and programmable routing make it suitable for substantially more complex logic than a basic programmable device. The Spartan-3 family combines logic resources, block RAM, dedicated multipliers, and programmable I/O for embedded control, communications, industrial automation, and signal-processing systems.
Key characteristics include 1.5 million system gates, 29,952 logic cells, 487 I/O, a nominal 1.2 V core voltage, and operation from 0°C to 85°C. The FGG676 package provides 676 ball-grid-array contacts in a square surface-mount footprint. Device listings also identify a 630 MHz performance figure and 90 nm fabrication technology, making this part a high-density, cost-optimized member of the Spartan-3 product family.
The XC3S1500 architecture supports parallel processing through its large logic fabric and dedicated resources. Its 487 I/O provide substantial connectivity for external memories, communication transceivers, data converters, and general-purpose digital interfaces. The -4 speed grade targets designs requiring a specific performance class, while the commercial temperature range makes the device appropriate for equipment operating in controlled indoor or industrial environments without extended-temperature requirements.
Typical uses include industrial control systems, network-interface equipment, video processing, instrumentation, communications infrastructure, and embedded signal-processing platforms. Its high pin count is especially useful when a design must connect multiple buses, external memories, high-speed interfaces, and control logic without requiring a larger package.
The principal design trade-off is board complexity. A 676-ball FBGA demands fine-pitch assembly, careful via and escape-routing planning, and PCB layer-count evaluation. Designers should use the manufacturer package drawings and pinout information to define land patterns, power planes, decoupling, and manufacturing rules before releasing a layout.
This product page combines exact catalog parameters, lifecycle information, sourcing guidance, package considerations, and same-footprint alternatives. It also highlights where speed, temperature grade, and package choice affect substitution decisions, helping engineers distinguish a true drop-in option from a merely similar Spartan-3 device.
Mga alternatibo na pwedeng ilagay na XC3S1500-4FGG676C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC3S1500-4FGG676C (parehas na form factor at footprint) — pagkakaiba sa Package, Temperature Grade, Speed Grade, User I/O, Mounting Type.
XC3S1500-4FGG676I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC3S1500-5FGG676C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC3S1500-5FGG676I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S1500-6FGG676C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S1500-6FGG676I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S1500-4FGG676C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 1,500,000 gates |
| Logic Cells | 29,952 cells |
| I/O Count | 487 I/O |
| Core Supply Voltage | 1.2 V |
| Maximum Performance Figure | 630 MHz |
| Fabrication Technology | 90 nm |
| Performance Grade | -4 speed grade |
| Temperature Grade | Commercial, 0°C to 85°C |
| Package Type | 676-ball FBGA (FGG676) |
| Number of Package Balls | 676 balls |
| Package Family | Fine-pitch ball grid array |
| Uri ng Pagpapasok | Surface-mount |
| Terminal Form | Ball |
| Package Shape | Square |
| Programmable Logic Type | FPGA |
| Device Family | Spartan-3 |
| Product Category | Programmable logic device |
Gabay sa Pin Configuration ng XC3S1500-4FGG676C square
Pin configuration para sa XC3S1500-4FGG676C (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC3S1500-4FGG676C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC3S1500-4FGG676C ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, Network Communications Equipment, Video and Image Processing, Test and Measurement Instrumentation, Embedded Signal Processing, Secure Embedded Systems.
Industrial Control and Automation
The XC3S1500-4FGG676C is suitable for industrial controllers because its 1.5 million system gates and 29,952 logic cells can support control logic, sequencing, diagnostics, and communications concurrently. Its 487 I/O provide ample connections for sensors, actuators, encoders, isolated interfaces, and field buses, while the 1.2 V core supply supports a conventional FPGA power architecture. The commercial 0°C to 85°C range is appropriate for protected indoor equipment. Designers should use the manufacturer power and decoupling guidance, preserve the -4 timing constraints, and validate operation across the full ambient range.
Inirekomenda
Network Communications Equipment
The XC3S1500-4FGG676C can implement packet processing, interface conversion, buffering, and protocol handling within network-interface equipment. Its high-density programmable logic supports parallel datapaths, while 487 I/O offer flexible connectivity for transceivers, status signals, management interfaces, and external memories. The FGG676 package provides more balls than smaller Spartan-3 options, allowing additional board-level interconnect without changing the device family. Timing closure must be checked against the -4 speed grade, and high-speed routed signals require controlled impedance, reference planes, and proper layer transitions.
Inirekomenda
Video and Image Processing
The XC3S1500-4FGG676C is suitable for pixel pipelines, image filtering, test-pattern generation, frame synchronization, and control logic in embedded video equipment. Its 29,952 logic cells and dedicated programmable resources allow several parallel processing stages to operate within one FPGA, while 487 I/O support capture devices, display controllers, memory components, and synchronization signals. The -4 grade supplies a defined timing class, but designers must constrain every clocked path for the target clock and I/O standards. Video interfaces also benefit from deliberate length matching and isolated routing between external clock domains.
Inirekomenda
Test and Measurement Instrumentation
The XC3S1500-4FGG676C can coordinate acquisition, triggering, pattern generation, calibration, and data-transfer functions in test and measurement equipment. The programmable architecture supports concurrent channels and deterministic control, while 487 I/O allow flexible attachment to converters, memory, clocks, and operator interfaces. Its commercial temperature range suits controlled laboratory and service environments. For accurate measurements, use clocked logic with bounded skew, isolate analog and digital returns appropriately, and apply the manufacturer guidance for configuration, power sequencing, and decoupling around the 1.2 V core.
Inirekomenda
Embedded Signal Processing
The XC3S1500-4FGG676C is well matched to embedded signal-processing systems that require programmable filters, correlation, modulation, digital conversion, or fixed-function acceleration without a discrete ASIC. The 1.5 million system gates provide implementation flexibility, and the large I/O count supports parallel converters, memory banks, and control peripherals. The 1.2 V core operation and 90 nm Spartan-3 architecture fit established embedded-system power trees. Designers should budget logic resources carefully, use vendor synthesis and timing reports, and implement metastability controls wherever external asynchronous signals enter synchronized clock domains.
Inirekomenda
Secure Embedded Systems
The XC3S1500-4FGG676C can support secure boot control, cryptographic acceleration, key-management interfaces, command filtering, and peripheral isolation in embedded systems. Its programmable logic permits security functions and control logic to share a single device, while 487 I/O support external flash, authentication components, status indicators, and communications channels. Because the product is listed as discontinued, secure-system planning should include configuration-file control, device traceability, and long-term availability review. Verify bitstream authentication features and any cryptographic hardware requirements directly in the selected Spartan-3 device documentation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC3S1500-4FGG676C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC3S1500-4FGG676I | XC3S1500-5FGG676C | XC3S1500-5FGG676I | XC3S1500-6FGG676C | XC3S1500-6FGG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FBGA (FGG676) | 676-ball FBGA (FGG676) | 676-ball FBGA (FGG676) | 676-ball FBGA (FGG676) | 676-ball FBGA (FGG676) | 676-ball FBGA (FGG676) |
| System Gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates |
| Logic Cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells |
| I/O Count | 487 I/O | 487 I/O | 487 I/O | 487 I/O | 487 I/O | 487 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -4 | -4 | -5 | -5 | -6 | -6 |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial | Commercial | Industrial | Commercial | Industrial |
| Fabrication Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
| Product Lifecycle | Discontinued | Legacy Spartan-3 family | Legacy Spartan-3 family | Legacy Spartan-3 family | Legacy Spartan-3 family | Legacy Spartan-3 family |
Pangunahing mga Pagkakaiba
- Direct industrial-temperature option in the same footprint (kumpara saXC3S1500-4FGG676I)
- Original commercial-grade combination for controlled environments (kumpara saXC3S1500-5FGG676I)
- Full 676-ball I/O interface rather than reduced-package alternatives (kumpara saXC3S1500-4FG456C)
- Maximum I/O connectivity among the Spartan-3 alternatives (kumpara saXC3S1500-4FGG320C)
Talaan ng Disenyo
Use the manufacturer FGG676 package drawing to define the PCB land pattern, solder-mask apertures, and assembly allowances. A 676-ball FBGA requires substantially more routing density than a 320-ball or 456-ball Spartan-3 package. Evaluate escape routing, buried or blind microvias, layer count, and via-in-pad fabrication capability before committing the board stack-up. Keep high-speed nets on continuous reference planes and avoid unnecessary right-angle transitions.
Follow the manufacturer power-distribution and decoupling guidance for the 1.2 V core and associated I/O supplies. Place high-frequency decoupling capacitors close to the relevant supply and ground balls, then verify that the complete power net satisfies the target's transient requirements. Estimated: if the regulator experiences a 10 mA load step, even a 10 mV droop corresponds to 1 ohm of effective source impedance; actual limits must be checked against the manufacturer specification.
The Spartan-3 device is a programmable-logic IC rather than a discrete power semiconductor, so a safe-operating-area chart is not applicable. Thermal design should instead evaluate package dissipation, ambient temperature, airflow, and the exposed-area behavior defined in the manufacturer package information. Estimated: every 1 W of device dissipation increases board temperature above ambient by approximately 1 degree C multiplied by the effective thermal resistance in °C/W; use the applicable junction-to-ambient value for the final assembly.
Constrain all synchronous paths for the selected -4 speed grade and verify setup and hold margins after final placement and routing. Synchronize asynchronous inputs before use, constrain false-path and multicycle relationships only after reviewing the design architecture, and avoid changing I/O standards without confirming bank-specific voltage compatibility. For memory or high-speed interfaces, use manufacturer timing data and PCB signal-integrity guidance rather than relying only on synthesis reports.
Do not treat XC3S1500-4FGG320C or XC3S1500-4FG456C as drop-in alternatives: both use smaller packages with different ball counts and land patterns. Also do not substitute a commercial-temperature C suffix for an industrial I suffix without checking the ambient range. For an existing XC3S1500-4FGG676C board, verify the exact ordering code, bitstream compatibility, configuration method, temperature requirements, and package drawings before authorizing a replacement.
Impormasyon ng Pagsunod sa Kautusan
The exact ordering code is identified as lead-free in a product listing, but no definitive RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration is provided. Automotive qualification is not stated and should not be inferred.