XC3S2000-4FG456C - 2M Gate Spartan-3 FPGA | AMD
MPN: XC3S2000-4FG456C ✗ Tapus ng BuhayXC3S2000-4FG456C Ulas
A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after fabrication. The FPGA hierarchy places the XC3S2000 within programmable logic devices, where it provides more implementation flexibility than a fixed-function application-specific integrated circuit. Its 46,080 configurable cells can support parallel data paths, control logic, embedded memory, and programmable I/O in one device.
The device combines 5,120 configurable logic blocks, 46,080 configurable logic cells, 333 I/O, and 2,000,000 system gates. A maximum clock rate of 630 MHz is associated with the device listing, while the -4 suffix identifies the selected performance grade. The 90 nm CMOS process and 1.2 V core supply place this part in the Spartan-3 generation of cost-conscious FPGAs.
The 456-pin PBGA package provides 333 user I/O in a compact surface-mount form factor. Its large pin count supports wide parallel buses and numerous board-level connections, but it also requires careful PCB escape routing and thermal design. Because the package does not have a corresponding diagram key in the available library, the package drawing uses the default representation rather than an inferred ball map.
Typical uses include industrial automation, communications equipment, embedded control, test and measurement, and general-purpose digital prototyping. The 46,080-cell resource level is appropriate for designs requiring substantially more logic than a small microcontroller while retaining the parallel programmability of an FPGA.
Design planning should focus on pin constraints, supported I/O standards, clocking, configuration memory, and power delivery. A replacement must match the exact 456-pin PBGA footprint and pinout; speed-grade and temperature-grade changes can alter qualification without necessarily changing the board pattern.
This product record combines device-specific specifications, same-package replacement guidance, a parameter comparison, and practical PCB considerations. It is intended to help engineers identify whether the XC3S2000-4FG456C fits an existing Spartan-3 design before requesting a quote or committing the footprint to fabrication.
Mga alternatibo na pwedeng ilagay na XC3S2000-4FG456C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC3S2000-4FG456C (parehas na form factor at footprint) — pagkakaiba sa Device Type, RoHS Status.
XC3S2000-4FG456I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC3S2000-5FG456C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S2000-5FG456I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S2000-3FG456C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S2000-3FG456I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC3S2000-4FG456C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Spartan-3 field-programmable gate array |
| System Gates | 2,000,000 gates |
| Configurable Logic Cells | 46,080 cells |
| Configurable Logic Blocks | 5,120 CLBs |
| User I/O | 333 I/O |
| Maksimum na Taktiko ng Oras | 630 MHz |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -4 grade |
| Process Technology | 90 nm CMOS |
| Logic Cell Density | 46,080 cells |
| Device Package | 456-pin PBGA |
| Ball Grid Array Package | 456-BBGA |
| Uri ng Pagpapasok | Surface mount |
| Product Family | Spartan-3 |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Gabay sa Pin Configuration ng XC3S2000-4FG456C 456-bbga
Pin configuration para sa XC3S2000-4FG456C (456-bbga package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC3S2000-4FG456C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC3S2000-4FG456C ay nararapat para sa 6 aplikasyons: Industrial Automation Controller, Communications Interface Consolidation, Test and Measurement Instrument, Medical Device Control Module, Network Data Processing, High-Performance Digital Prototype.
Industrial Automation Controller
The XC3S2000-4FG456C fits industrial automation controllers that coordinate multiple sensors, actuators, interlocks, and machine-control sequences. Its 46,080 configurable logic cells provide substantial parallelism, while 333 I/O support discrete field signals and wider bus structures on a single device. A -4 design can operate from a 1.2 V core supply, and the 456-pin PBGA concentrates a high pin count into a compact surface-mount footprint. For systems requiring broader temperature operation, review the XC3S2000-4FG456I. PCB implementation should include local supply decoupling, solid ground distribution, controlled clock routing, and careful validation of every field interface before production release.
Inirekomenda
Communications Interface Consolidation
The XC3S2000-4FG456C is useful in communications equipment that requires flexible parallel data paths, protocol adaptation, buffering, and timing control. With 46,080 configurable logic cells, the device can implement multiple interface channels and support logic without relying on a large set of fixed-function devices. The 333 available I/O positions are valuable when the design combines external memory, network interfaces, status signals, and backplane links. Its 630 MHz listed clock rate provides a timing reference for suitable designs, while the -4 grade must satisfy the established clocking margin. Signal-integrity work should include controlled-impedance routing, return-path continuity, source-terminated interfaces, and separate analog or sensitive clock partitioning.
Inirekomenda
Test and Measurement Instrument
The XC3S2000-4FG456C can support programmable test and measurement systems by combining acquisition control, sequencing, pattern generation, and interface management in one FPGA. Its 46,080 configurable logic cells allow multiple acquisition channels or wide counters to be implemented concurrently, while 333 I/O provide connections to converters, memories, front-panel controls, and trigger circuitry. The 1.2 V core supply supports integration into a partitioned low-voltage power system, but each rail still requires local decoupling and sequencing control. Designers should treat the FPGA as part of the analog measurement chain by isolating sensitive inputs, keeping clock distribution deterministic, and verifying timing closure with the actual board loading and instrument-control firmware.
Inirekomenda
Medical Device Control Module
The XC3S2000-4FG456C can implement deterministic control, monitoring, and communication functions in a medical-device electronic module. Its programmable logic supports parallel sensor interfaces, redundant state checks, alarm logic, and data routing that would otherwise require several fixed-function components. The 333 I/O and 456-pin PBGA support a high connection count, while the -4 grade allows timing designs to be constrained around a defined performance class. For deployments requiring the industrial temperature designation, the XC3S2000-4FG456I preserves the package and core resources. Safety and regulatory work must independently assess failure modes, isolation boundaries, configuration control, and environmental qualification rather than treating FPGA capability as automatic compliance.
Inirekomenda
Network Data Processing
The XC3S2000-4FG456C is suitable for network equipment that performs packet classification, buffering, aggregation, and interface conversion. Its 46,080 configurable logic cells and 5,120 configurable logic blocks allow multiple datapaths to operate in parallel, while 333 I/O support external memories and high-speed parallel connections. The 1.2 V core supply fits systems organized around modern partitioned rails, although board-level power integrity remains essential at the BGA. Engineering teams should use synchronous design practices, constrain all clock domains, minimize skew across the 456-pin device, and validate memory and SerDes interfaces separately. The -5 family option may offer additional timing margin when the target interface cannot close reliably at the -4 performance grade.
Inirekomenda
High-Performance Digital Prototype
The XC3S2000-4FG456C provides a large prototyping platform for algorithms, parallel processors, and complex control systems that need more resources than a small programmable logic device. With 46,080 configurable logic cells, 2,000,000 system gates, and 333 I/O, a prototype can incorporate multiple pipelines, register stages, memories, and external peripheral interfaces in one programmable device. The 456-pin PBGA requires a multilayer board with careful escape routing and a stable power grid, making board bring-up more demanding than a leaded-package prototype. Engineers should preserve configurable test access, include clocking infrastructure from the first revision, and validate timing under realistic I/O loading. Faster or industrial-grade family members can be evaluated when timing or environmental margins exceed the -4/C configuration.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC3S2000-4FG456C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC3S2000-4FG456I | XC3S2000-5FG456C | XC3S2000-5FG456I | XC3S2000-3FG456C | XC3S2000-3FG456I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 456-BBGA | 456-BBGA | 456-BBGA | 456-BBGA | 456-BBGA | 456-BBGA |
| Product Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| Speed Grade | -4 | -4 | -5 | -5 | -3 | -3 |
| Temperature Grade | C | I | C | I | C | I |
| Configurable Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| System Gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates |
| User I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Pangunahing mga Pagkakaiba
- Same-footprint industrial-temperature option (kumpara saXC3S2000-4FG456I)
- One-step speed-grade alternative (kumpara saXC3S2000-5FG456C)
- Broader ordering-option coverage for timing and temperature (kumpara saXC3S2000-5FG456I)
Talaan ng Disenyo
Reserve the exact 456-ball PBGA footprint from the manufacturer package drawing rather than treating FG and FGG package codes as interchangeable. Plan power and ground escape routing before placing high-speed interfaces, provide local core and auxiliary decoupling at the device, and maintain uninterrupted ground references beneath the BGA. The 333 I/O count also makes signal-integrity and simultaneous-switching considerations important during return-path planning.
Separate clocks, high-speed buses, and sensitive I/O regions during floorplanning, and route each clock from a controlled source through matched paths. Avoid routing noisy outputs beside clock or configuration inputs, especially where the 456-pin package offers many external connections. Place termination, series damping, and interface devices close to the relevant FPGA balls, and verify every escape path against the exact manufacturer pinout.
Do not substitute XC3S2000-4FGG456C or XC3S2000-4FGG676I solely because their listings mention 456 or 676 pins. Package codes indicate mechanical and electrical distinctions, and a 676-ball device also requires a different footprint. Likewise, a changed speed or temperature suffix can affect qualification and timing even when the logic resources remain identical. Confirm the complete ordering code against the manufacturer documentation.
Design the 1.2 V core rail as a dedicated, low-impedance supply and follow the manufacturer requirements for auxiliary supplies, sequencing, and decoupling. Account for voltage-drop tolerance, transient response, and the aggregate current required by the configured Spartan-3 logic. Estimate worst-case dissipation from the actual design activity rather than relying only on nominal logic resources, then verify the board temperature rise under maximum operating conditions.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration was identified for this legacy device. Automotive qualification is not applicable to the standard commercial-grade part.