XC3S400-4PQ208I - 400K Gate Spartan-3 FPGA | AMD | Industrial
MPN: XC3S400-4PQ208I ✗ Tapus ng BuhayXC3S400-4PQ208I Ulas
Mga alternatibo na pwedeng ilagay na XC3S400-4PQ208I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
XC3S400-4PQG208I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC3S400-4PQG208C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC3S400-5PQG208C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC3S400-4PQ208I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Spartan-3 Field Programmable Gate Array (FPGA) |
| System Gates | 400000 |
| Logic Cells | 8064 |
| Inputs/Outputs | 141 |
| Maksimum na Taktiko ng Oras | 630 MHz |
| Core Supply Voltage | 1.2 V |
| FPGA Technology | 90 nm |
| Packhaging | 208-BFQFP |
| Number of Terminals | 208 |
| Package Shape | Square |
| Style ng Pagpapasok | Surface Mount |
| Terminal Form | Gull Wing |
| Lead-Free Status | Lead Free |
| Speed Grade | -4 |
| Temperature Grade | Industrial |
Gabay sa Pin Configuration ng XC3S400-4PQ208I square
Pin configuration para sa XC3S400-4PQ208I (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC3S400-4PQ208I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC3S400-4PQ208I ay nararapat para sa 6 aplikasyons: Industrial Automation and Control, Communications Interface and Protocol Bridging, Digital Signal Processing, Data Acquisition and Instrumentation, Embedded System Control Hub, Consumer and Communication Equipment.
Industrial Automation and Control
XC3S400-4PQ208I fits industrial automation controllers where parallel logic, multiple I/O, and programmable timing are more valuable than minimum unit cost. Its verified 8064 logic cells can host state machines, sequencing logic, interlocks, counters, and communication-control functions, while 141 I/O provide connections to sensors, actuators, status indicators, and field-bus transceivers. The I industrial-grade ordering designation makes it the appropriate starting point when ambient-temperature requirements exceed commercial limits. A practical implementation places the FPGA beside optoisolated interface circuits, uses a stable low-noise 1.2 V core rail, and validates timing with the actual external devices. The 630 MHz maximum clock is not a guarantee that every design will close at that frequency; actual timing depends on logic depth, routing, constraints, and I/O loading.
Inirekomenda
Communications Interface and Protocol Bridging
XC3S400-4PQ208I is suitable for communications front ends that need concurrent framing, buffering, status, and protocol conversion. The 141 verified I/O allow parallel data buses and control signals to coexist with external transceivers, while 8064 logic cells provide enough parallel processing for packet assembly, byte alignment, FIFO control, and interface timing. The device is particularly useful when multiple legacy buses must be bridged without a microprocessor handling every real-time transaction. A sound implementation constrains clock domains explicitly, synchronizes asynchronous inputs, keeps high-speed routing away from sensitive configuration paths, and validates protocol behavior using boundary-scan and directed test vectors. The 630 MHz device capability provides margin for pipelined logic, although external transceiver bandwidth and PCB signal integrity usually constrain end-to-end throughput first.
Inirekomenda
Digital Signal Processing
XC3S400-4PQ208I can implement parallel digital signal-processing functions in consumer, industrial, and communications equipment. Its 8064 logic cells support filter pipelines, correlation logic, digital delay, waveform generation, and fixed-point arithmetic, while the 208-pin package provides connections for parallel ADC or DAC data. The verified 630 MHz maximum clock is useful for pipelined architectures that require short combinational paths. Engineers should map arithmetic to available dedicated resources where possible and use the vendor timing tools to establish whether DSP blocks, multipliers, block RAM, and distributed RAM satisfy the target design. Because detailed resource counts and memory specifications are not included in the supplied search excerpts, they must be confirmed in DS099. Good practice is to prototype the arithmetic kernel, benchmark it with realistic word lengths, and reserve margin for routing congestion before committing to the full board.
Inirekomenda
Data Acquisition and Instrumentation
XC3S400-4PQ208I is appropriate for data-acquisition front ends that must coordinate sensors, multiplexers, memory, and a host interface. The 141 I/O provide parallel sensor connections and control outputs, and the programmable logic can implement calibration tables, trigger sequencing, digital filtering, and data packing before transmission. For laboratory or industrial instrumentation, the industrial-temperature suffix is the relevant selection advantage over the C-listed commercial alternative. The design should separate analog front-end routing from FPGA clocking and configuration signals, use controlled clock distribution, and define deterministic acquisition timing. The 1.2 V core supply requires local decoupling and a quiet power source, while configuration storage must boot reliably after power cycling. Verify exact I/O voltage limits, input thresholds, clock tolerances, and timing margins against the manufacturer documentation before fabrication.
Inirekomenda
Embedded System Control Hub
XC3S400-4PQ208I can serve as the central programmable controller in an embedded system combining memory control, peripheral management, and real-time sequencing. The 8064 logic cells are substantial enough for multiple concurrent state machines and hardware-assisted data paths, while the 208-pin package reduces the need for external glue logic. Designers can use the FPGA to supervise boot sequencing, monitor reset and power-good signals, arbitrate bus access, and accelerate peripheral data movement while a microcontroller handles higher-level software. This architecture benefits from a documented register map and bus handoff protocol so ownership changes are deterministic. Power-up configuration must be tested across voltage ramps, and any watchdog behavior should be independent of the programmable logic path that could fail. The supplied data does not list dedicated block RAM or DSP resources, so resource budgeting must be completed in the actual Xilinx design tool.
Inirekomenda
Consumer and Communication Equipment
XC3S400-4PQ208I can implement programmable control, display timing, storage interfaces, and product-specific logic in compact consumer or communications equipment. Its 8064 logic cells and 141 I/O allow timing generation, buffer management, and multiple peripheral interfaces to be consolidated, reducing component count in cost-sensitive products. The Spartan-3 90 nm implementation provides a conventional FPGA route for legacy designs that cannot use a higher-cost FPGA family. Practical designs must account for configuration memory, boot behavior, connector pin accessibility, and the difference between the 208-pin footprint and smaller PQFP alternatives. Since the supplied data does not verify exact operating-temperature limits or all I/O standards, engineers must not infer them from the distributor descriptions. Confirm package drawing, pin assignments, voltage domains, and timing before schematic sign-off.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC3S400-4PQ208I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC3S400-4PQG208I | XC3S400-4PQG208C | XC3S400-5PQG208C |
|---|---|---|---|---|
| Package | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP |
| Brand | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3 FPGA | Spartan-3 FPGA | Spartan-3 FPGA | Spartan-3 FPGA |
| Speed Grade | -4 | -4 | -4 | -5 |
| Temperature Designation | I industrial | I industrial | C commercial | C commercial |
| Technology | 90 nm | 90 nm | 90 nm | 90 nm |
Pangunahing mga Pagkakaiba
- Industrial temperature ordering option (kumpara saXC3S400-4PQG208C)
- Target -4 speed grade with industrial designation (kumpara saXC3S400-5PQG208C)
- Closest same-package ordering-code candidate (kumpara saXC3S400-4PQG208I)
Talaan ng Disenyo
The verified core supply is 1.2 V, but the complete power tree and current limits are not included in the supplied data. Do not select regulators, capacitors, or power-plane widths from general Spartan-3 guidance alone; use the manufacturer power requirements for the exact ordering code. Place local high-frequency bypass capacitors at the supply pins, provide a clean return path, and use separate filtering for clock and configuration connections. Estimated thermal and dissipation values cannot be provided without verified current data.
Use the manufacturer 208-BFQFP package drawing rather than generic PQFP dimensions when defining the land pattern. Confirm pin-1 orientation, courtyard clearances, solder mask, and exposed thermal or lead geometry from the official package data. The verified package is a square, surface-mount, gull-wing 208-terminal device. A pinout table was not present in the supplied material, so this page intentionally does not guess individual pin names or provide a fabricated diagram.
Route clocks as controlled-impedance nets and keep them away from configuration pins and sensitive data buses. Use a defined clock source, constrain all clock relationships, and provide deterministic reset or power-good sequencing before releasing functional logic. Although the device is listed with a maximum clock frequency of 630 MHz, that figure is a device-level maximum and does not guarantee timing closure; route length, fanout, logic depth, and I/O loading must be evaluated by the FPGA timing tools.
Do not substitute the commercial C-designated parts listed as alternatives for the I-designated target without checking environmental requirements, and do not treat the -4 and -5 ordering suffixes as interchangeable. Also verify configuration-memory support, JTAG behavior, and the exact package drawing before manufacturing. The supplied search data confirms device family and package characteristics but does not provide the complete ordering information table, pinout, or qualification report.
Impormasyon ng Pagsunod sa Kautusan
The verified DigiKey and related part-search descriptions identify the 208-BFQFP package as lead free. No verified RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 statement was supplied. The industrial suffix must not be treated as automotive qualification.
