XC4VFX12-10FF668C - 12,312 Logic Cell FPGA | AMD | 668-BGA
MPN: XC4VFX12-10FF668C ✗ Tapus ng BuhayXC4VFX12-10FF668C Ulas
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O resources can be configured after manufacture. The FPGA hierarchy progresses from configurable logic blocks to logic cells, then to a field-programmable gate array, and ultimately to the broader semiconductor category. Virtex-4 FX devices combine programmable logic with high-speed parallel interfaces, memory resources, clocking, and dedicated I/O capabilities for communications, industrial control, signal processing, and embedded systems.
The -10 speed grade provides a maximum clock frequency of 1028 MHz, while the 0.2 ns combinatorial delay per CLB supports timing closure in demanding synchronous designs. Its 12,312 logic cells and 1,368 CLBs permit parallel processing, wide state machines, control logic, and complete processor or interface subsystems to be consolidated into one programmable device. The 668-ball package supports a substantial connection count for high-pin-count board-level systems.
The CMOS implementation supports efficient integration of complex digital functions on one device. Compared with a fixed-function ASIC, an FPGA allows configuration changes, shorter hardware iteration cycles, and field updates through a supported programming path. The device also provides a larger external interface surface than smaller FPGA packages, making it appropriate for designs using many parallel buses, high-speed transceivers, memory interfaces, or multiple clock domains.
Typical uses include network packet processing, industrial automation, test and measurement equipment, telecommunications control planes, video infrastructure, embedded instrumentation, and high-speed interface aggregation. Engineers can place the device between sensors, converters, memories, and communications engines, then implement buffering, protocol handling, timing, and control functions in parallel. Its 1,368 CLBs are particularly useful when the design must meet a fixed latency rather than a minimum-area target.
A critical design consideration is package-level signal integrity. The 668-pin S-PBGA requires careful via and trace planning, and its power architecture must be designed according to the Virtex-4 package and power-guidance documentation. Differential pairs, clocks, and high-speed interfaces should be routed with continuous reference planes and controlled length matching.
This product page organizes the key Virtex-4 FX resource counts, speed information, package characteristics, replacement options, and practical implementation guidance. It also distinguishes the commercial -10 suffix and FF package code from nearby industrial and speed-grade alternatives so engineers can select a configuration with the correct operating requirements and procurement status.
Mga alternatibo na pwedeng ilagay na XC4VFX12-10FF668C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC4VFX12-10FF668C (parehas na form factor at footprint) — pagkakaiba sa Device Type, Package Type, Process Technology.
XC4VFX12-10FF668I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC4VFX12-10FFG668C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX12-11FF668C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX12-11FFG668C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX12-12FF668C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX12-12FFG668C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX12-10FF668C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Virtex-4 FX field-programmable gate array |
| FPGA Logic Cells | 12,312 logic cells |
| Configurable Logic Blocks | 1,368 CLBs |
| Maksimum na Taktiko ng Oras | 1,028 MHz |
| Combinatorial Delay | 0.2 ns per CLB |
| Process Technology | CMOS |
| Speed Grade | -10 |
| Temperature Grade | Commercial (C suffix) |
| Package Type | 668-pin S-PBGA (FCBGA) |
| Package Ball Count | 668 balls |
| Uri ng Pagpapasok | Surface mount |
| Device Family | Virtex-4 FX |
| Programmable Logic Type | FPGA |
Gabay sa Pin Configuration ng XC4VFX12-10FF668C 668 balls
Pin configuration para sa XC4VFX12-10FF668C (668 balls package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC4VFX12-10FF668C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC4VFX12-10FF668C ay nararapat para sa 6 aplikasyons: Network Packet Processing, Industrial Automation and Control, Test and Measurement Equipment, Telecommunications Interface Aggregation, Digital Signal Processing, Embedded Instrumentation and Control.
Network Packet Processing
The XC4VFX12-10FF668C is suitable for fixed-latency packet classification, queue management, protocol conversion, and traffic aggregation. Its 1,368 CLBs allow multiple parallel data paths to operate concurrently, while the 1,028 MHz maximum clock frequency supports high-rate control logic. The 668-pin package provides the connection count required for wide bus interfaces, network processors, memory devices, and multiple external I/O standards. Implement timing closures and throughput requirements before committing to the -10 grade, since routing congestion can prevent the board-level design from achieving the device's maximum internal clock frequency.
Inirekomenda
Industrial Automation and Control
The FPGA can consolidate motion control, sequencing, sensor conditioning logic, and safety monitoring in a single programmable device. Its 12,312 logic cells provide capacity for parallel state machines and interface adapters, while 1,368 CLBs allow deterministic pipelines with bounded latency. For factory equipment, the commercial -10 version should be selected only when the complete enclosure temperature remains inside its specified operating range. The wide 668-ball package supports high-speed converters, fieldbus transceivers, memory, and discrete I/O while keeping the timing-critical logic in one programmable domain.
Inirekomenda
Test and Measurement Equipment
In automated test systems, the XC4VFX12-10FF668C can implement pattern generation, acquisition control, trigger logic, and real-time analysis in parallel. The 1,368 CLBs make it useful for combining multiple instrument channels with deterministic sample sequencing, while the 0.2 ns CLB combinatorial delay supports short internal logic paths. Its 668-pin package accommodates high-speed data converters, parallel memory, and laboratory interfaces. Designers should use the manufacturer timing tools and board-level constraints to analyze clock uncertainty, I/O standards, and achievable throughput before fixing the external acquisition architecture.
Inirekomenda
Telecommunications Interface Aggregation
The device is appropriate for telecommunications line cards and interface aggregation designs that require multiple parallel channels, buffering, and protocol-specific logic. Its 12,312 logic cells and 1,368 CLBs support simultaneous data paths without relying on several smaller programmable devices. The 668-ball package provides access to high-speed interfaces, external memory, and control processors. Keep clock domains isolated, provide controlled reference planes for high-speed routing, and verify I/O voltage requirements against the selected Virtex-4 family guidance. The -10 speed grade should be matched to the timing budget rather than selected solely from the catalog maximum clock frequency.
Inirekomenda
Digital Signal Processing
The XC4VFX12-10FF668C can implement parallel filters, correlation, modulation, error detection, and fixed-point arithmetic pipelines. Its large CLB count allows multiple lanes to run concurrently, supporting higher aggregate throughput than a serial architecture. The -10 device reaches a 1,028 MHz maximum clock frequency according to the manufacturer data, making it suitable for timing-critical synchronous processing. Resource accounting must include routing, control, and memory overhead, while DSP-specific implementations should be checked against the published Virtex-4 DSP resource arrangement. Differential and high-speed physical interfaces require careful package-level power and signal-integrity planning.
Inirekomenda
Embedded Instrumentation and Control
A single XC4VFX12-10FF668C can combine legacy bus adapters, memory controls, supervisory logic, data acquisition, and communication protocols for embedded instrumentation. Consolidating these functions reduces interconnect complexity and allows programmable behavior to be updated independently of surrounding hardware. The 12,312 logic cells support several concurrent subsystems, and the 668-pin package leaves substantial board-routing capacity for mixed I/O standards. Preserve margins for startup configuration, define reset and power-sequencing behavior early, and validate each interface voltage. For equipment exposed to temperature extremes, the industrial suffix variant should be evaluated as the more appropriate drop-in choice.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC4VFX12-10FF668C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC4VFX12-10FF668I | XC4VFX12-10FFG668C | XC4VFX12-11FF668C | XC4VFX12-11FFG668C | XC4VFX12-12FF668C | XC4VFX12-12FFG668C |
|---|---|---|---|---|---|---|---|
| Package | 668-pin S-PBGA (FCBGA) | 668-pin S-PBGA (FCBGA) | 668-pin S-PBGA (FCBGA) | 668-pin S-PBGA (FCBGA) | 668-pin S-PBGA (FCBGA) | 668-pin S-PBGA (FCBGA) | 668-pin S-PBGA (FCBGA) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Logic Cells | 12,312 logic cells | 12,312 logic cells | 12,312 logic cells | 12,312 logic cells | 12,312 logic cells | 12,312 logic cells | 12,312 logic cells |
| Configurable Logic Blocks | 1,368 CLBs | 1,368 CLBs | 1,368 CLBs | 1,368 CLBs | 1,368 CLBs | 1,368 CLBs | 1,368 CLBs |
| Speed Grade | -10 | -10 | -10 | -11 | -11 | -12 | -12 |
| Temperature Grade | Commercial (C suffix) | Industrial (I suffix) | Commercial (C suffix) | Commercial (C suffix) | Commercial (C suffix) | Commercial (C suffix) | Commercial (C suffix) |
Pangunahing mga Pagkakaiba
- Provides a practical speed-grade alternative without changing the logical resource count (kumpara saXC4VFX12-12FF668C)
- Direct industrial-temperature option retains the identical -10 performance class (kumpara saXC4VFX12-10FF668I)
- Commercial -10 configuration supports cost-oriented timing designs (kumpara saXC4VFX12-11FF668C)
Talaan ng Disenyo
Use the Virtex-4 Packaging and Pinout Specification together with the device-specific package files when defining all 668 ball assignments. Place decoupling and power-distribution structures directly beneath the device, preserve continuous return paths, and route high-speed differential signals over uninterrupted reference planes. Do not substitute a generic BGA land pattern because ball pitch, ball-map orientation, and package dimensions must match the exact FF or FFG ordering code.
Design the supply network for worst-case utilization rather than only idle current. Use separate, low-impedance distribution paths for core and I/O requirements where the device architecture calls for them, and place bulk and local decoupling according to the manufacturer guidance. Control inrush during configuration, maintain the required sequencing and voltage tolerances, and avoid sharing noisy return current with sensitive clock or interface paths.
Thermal design must reflect actual logic activity, I/O toggling, ambient temperature, airflow, board construction, and copper spreading. The 1,028 MHz figure is a maximum device capability rather than a guaranteed board operating frequency. Use the Virtex-4 electrical and packaging specifications to determine limits, then verify the assembled board at maximum expected activity because an FPGA's junction temperature can rise substantially above ambient.
Constrain clocks, chip selects, byte lanes, and other source-synchronous interfaces using board-specific timing and routing rules. Maintain length matching within the margin allowed by the selected external device, avoid stubs, and provide solid reference planes beneath high-speed routes. For differential pairs, preserve continuous impedance and pair geometry through vias and layer transitions. Validate the final stack-up with simulation or measurement because the FPGA package alone does not determine the complete channel.
Impormasyon ng Pagsunod sa Kautusan
The C suffix identifies the commercial temperature grade, but it does not by itself establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. A specific compliance document should be requested for the exact ordering code.