XC4VLX15-11SF363I - 13,824-Cell 90nm FPGA | Xilinx, Inc.
MPN: XC4VLX15-11SF363I ✗ Tapus ng BuhayXC4VLX15-11SF363I Ulas
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and dedicated blocks are configured after manufacture. The FPGA category sits below programmable logic and above fixed-function processors and custom application-specific integrated circuits. Compared with a mask-programmed ASIC, an FPGA allows design revisions, field updates, and hardware customization without fabricating a new ASIC mask. Compared with smaller CPLDs, it provides substantially greater logic, memory, dedicated processing, and high-speed I/O capability.
The XC4VLX15-11SF363I provides 1,536 configurable logic blocks and 13,824 logic cells, with 240 user I/Os distributed through the 363-FCBGA package. Its architecture supports parallel logic implementation, DSP processing, block RAM, and dedicated I/O resources, depending on the selected device features and design. The nominal 1.2 V core voltage is accompanied by a stated operating range of 1.14 V to 1.26 V, while separate supply rails support the device's configurable and fixed-function I/O structures.
The -11 designation identifies the device's speed grade, while the industrial suffix identifies its specified operating-temperature class. The package's ball count is larger than its user-I/O count because the FCBGA also provides power, ground, configuration, dedicated function, and other package balls. A complete PCB design must follow the manufacturer package pinout, differential-pair rules, power-plane arrangement, and via requirements rather than treating all 363 balls as general-purpose user I/O.
Typical uses include industrial automation, communications infrastructure, test and measurement, high-speed signal processing, embedded control, and prototype systems requiring a high logic-cell count. The Virtex-4 architecture is particularly useful when a design needs parallel DSP pipelines, moderate on-chip RAM, numerous user I/Os, and reconfigurable hardware in one device. Designs should account for configuration memory, startup behavior, clocking, termination, and tool-version compatibility during migration or maintenance.
PCB implementation should place decoupling capacitors close to the associated supply balls, route clocks with short return paths, preserve regulated supply sequencing, and use the manufacturer's recommended ball-pad geometry. Because this is a fine-pitch FCBGA device, inspection, assembly, solder-mask definition, via-in-pad practice, thermal management, and board warpage are as important as logic selection. Configuration pins and dedicated inputs must not be left unconstrained merely because they are not user I/Os.
This product record combines the verified device identity, package and logic-resource details with sourcing guidance, replacement constraints, and practical design notes. It also distinguishes true package-compatible order-code variants from larger-package devices that would require a PCB redesign, helping engineers evaluate replacement and redesign decisions before committing a new design.
Mga alternatibo na pwedeng ilagay na XC4VLX15-11SF363I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
XC4VLX15-11SF363C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VLX15-11SFG363I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VLX15-11SF363S2
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VLX15-10SFG363I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VLX15-10SFG363C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VLX15-11SF363I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Virtex-4 LX field-programmable gate array (FPGA) |
| Logic Cells | 13,824 cells |
| Configurable Logic Blocks | 1,536 CLBs |
| User I/O Count | 240 I/Os |
| Packhaging | 363-FBGA / FCBGA, 363 balls |
| Manufacturing Technology | 90 nm CMOS |
| Nominal Core Supply Voltage | 1.2 V |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -11 |
| Temperature Grade | Industrial |
| Architecture | Virtex-4 LX |
| Programmable Logic Type | FPGA |
Gabay sa Pin Configuration ng XC4VLX15-11SF363I 363-fbga / fcbga, 363 balls
Pin configuration para sa XC4VLX15-11SF363I (363-fbga / fcbga, 363 balls package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC4VLX15-11SF363I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC4VLX15-11SF363I ay nararapat para sa 6 aplikasyons: Industrial Automation and Control, Communications and Network Processing, DSP and Signal Processing, Test and Measurement Equipment, Embedded Control and Data Acquisition, Aerospace and Defense Prototyping.
Industrial Automation and Control
The XC4VLX15-11SF363I fits industrial controllers that need substantial parallel logic, 240 user I/Os, and reconfigurable hardware for motion, sequencing, and machine control. Its 13,824 logic cells and 1,536 CLBs provide room for multiple control paths, state machines, diagnostics, and communication interfaces without splitting the design across several devices. The industrial suffix supports deployment where operating-temperature requirements are stringent, while the -11 speed grade helps timing-critical control logic meet clock objectives. Board design must still address clean supplies, clock jitter, isolated I/O, and robust 363-FBGA assembly.
Inirekomenda
Communications and Network Processing
The Virtex-4 LX architecture gives the XC4VLX15-11SF363I enough parallel resources for packet processing, protocol conversion, channel aggregation, and test instrumentation. Its 240 user I/Os can support multiple buses and high-speed interfaces when the board provides appropriate voltage levels, termination, and signal conditioning. The 13,824-cell fabric allows designers to combine fixed control functions with configurable datapaths, although the exact sustainable interface rates depend on the selected I/O standard, clocking, PCB topology, and design timing. Configuration security, reference-clock integrity, and power sequencing are especially important in communications equipment.
Inirekomenda
DSP and Signal Processing
The XC4VLX15-11SF363I can implement parallel DSP pipelines, digital filtering, correlation, waveform generation, and preprocessing where deterministic throughput is more important than minimizing device count. Its 1,536 configurable logic blocks and 13,824 logic cells allow fixed-point datapaths and control logic to coexist within one FPGA. Using the architecture's dedicated processing and memory blocks, where required, can reduce general-purpose logic pressure and improve implementation efficiency. Clock placement, data alignment, and I/O timing must be planned together because a logically correct DSP design can still fail timing if the routing or package constraints are ignored.
Inirekomenda
Test and Measurement Equipment
The XC4VLX15-11SF363I suits configurable test platforms that combine pattern generation, acquisition logic, timing control, and communication processing. Its large logic-cell count supports parallel channels and reusable instrument architectures, while 240 user I/Os provide connectivity for converters, trigger logic, and control interfaces. FPGA-based instruments benefit from downloadable configuration, allowing the same hardware platform to implement different measurement modes as algorithms evolve. Precise clocking, calibration structures, controlled impedance, and ground-plane segmentation become critical when collecting low-level signals alongside high-speed digital processing.
Inirekomenda
Embedded Control and Data Acquisition
The device can act as a high-performance embedded control engine for data-acquisition systems, embedded servers, and specialized instrumentation. Its 13,824 logic cells allow designers to implement multiple processor-facing peripherals, buffer control, protocol stacks, and deterministic state logic in a single programmable device. The 240-user-I/O count helps connect external sensors, converters, memory, and service interfaces while keeping a compact system footprint. Designers should reserve sufficient configuration storage, use the recommended clocking and reset architecture, and validate termination and analog-interface behavior at the board level.
Inirekomenda
Aerospace and Defense Prototyping
The XC4VLX15-11SF363I can support legacy aerospace, defense, and secure-imaging prototypes that need reconfigurable logic and a high pin count in a single device. Its industrial ordering class and -11 speed designation can suit demanding logic timing, but individual program requirements may impose additional screening, documentation, radiation, or export controls. The 363-FCBGA package enables dense connections while making thermal design, solder-joint inspection, via reliability, and board qualification critical. Before adoption, confirm that the exact suffix is acceptable to the applicable quality or procurement program rather than assuming the generic industrial designation satisfies it.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC4VLX15-11SF363I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC4VLX15-11SF363C | XC4VLX15-11SFG363I | XC4VLX15-11SF363S2 | XC4VLX15-10SFG363I | XC4VLX15-10SFG363C |
|---|---|---|---|---|---|---|
| Brand | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. |
| Package | 363-FBGA / FCBGA | 363-FBGA / FCBGA | 363-FBGA / FCBGA | 363-FBGA / FCBGA | 363-FBGA / FCBGA | 363-FBGA / FCBGA |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| Configurable Logic Blocks | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs |
| User I/O | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os |
| Speed Grade | -11 | -11 | -11 | -11 | -10 | -10 |
| Manufacturing Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Pangunahing mga Pagkakaiba
- Retains the full -11 performance grade (kumpara saXC4VLX15-10SFG363I)
- Industrial-temperature ordering class (kumpara saXC4VLX15-11SF363C)
- Matches the complete legacy package footprint (kumpara saXC4VLX15-11FF676I)
Talaan ng Disenyo
Implement the 363-FBGA footprint directly from the manufacturer package drawing and verify ball names against the specific device documentation before release. The 240 user I/Os do not account for the other power, ground, configuration, clock, and dedicated balls. Preserve the recommended solder-mask-defined or NSMD pad geometry, controlled-impedance escape routing, and ball-via arrangement specified for the assembly process. Do not derive a footprint from another Virtex-4 package because ball assignment and pad geometry are package-specific.
Separate the core, I/O, and auxiliary supplies according to the manufacturer power-supply table and keep local decoupling close to the associated package balls. Use the recommended voltage ranges, source impedance, and sequencing behavior rather than treating every supply rail as interchangeable. For a 1.2 V nominal core, the documented operating span is 1.14 V to 1.26 V, so supply regulation and transient response must be evaluated across temperature, load, and board-level power-source tolerance.
Route clock and high-speed differential signals over continuous reference planes with short, symmetric paths and controlled impedance. Follow the manufacturer guidance for unused I/O, configuration pins, dedicated pins, and clock-capable pins; floating or incorrectly terminated inputs can compromise signal integrity or configuration behavior. Place configuration storage and associated interface components where their timing requirements are met, and provide clean, accessible ground connections around sensitive routing to minimize shared-impedance noise.
The principal replacement risk is treating similar suffixes as automatically interchangeable. Changing from I to C affects the temperature ordering class, changing from SF to SFG affects lead-free construction, and changing from -11 to -10 affects the performance grade. The larger XC4VLX15-11FF676I uses 320 user I/Os and a 676-ball FCBGA package, so it is not a drop-in choice for a 363-ball board. Record the approved alternate MPN in the BOM and validate timing after any order-code change.
Impormasyon ng Pagsunod sa Kautusan
The G suffix identifies a lead-free ordering variant of XC4VLX15-11SFG363I, while the base XC4VLX15-11SF363I ordering code is identified as non-lead-free. Other environmental and automotive compliance statuses require confirmation for the exact ordering code.