XC6SLX100T-2FG900C - 101K-Cell Spartan-6 LXT FPGA | AMD
MPN: XC6SLX100T-2FG900C ✓ NakahandaXC6SLX100T-2FG900C Ulas
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The Spartan-6 LXT family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, digital signal processing resources, programmable I/O, and dedicated hard controllers. This makes an FPGA useful when fixed-function ASIC economics are unsuitable or when interfaces, logic, and product requirements are still evolving.
The XC6SLX100T-2FG900C provides 101261 logic cells and 498 I/O in a 900-BBGA package. Its 45 nm CMOS implementation and 1.2 V core supply are characteristic of the Spartan-6 generation. The -2 designation identifies its performance grade, while the FG900C ordering code identifies the commercial-temperature, lead-free 900-ball package configuration used in demanding PCB designs.
The device belongs to the Spartan-6 LXT family, where LXT models provide a balanced combination of logic resources and connectivity for communication infrastructure, industrial control, test equipment, embedded video, and high-performance signal processing. The 900-BBGA package supports a large pin count but requires a dense, multilayer PCB layout with careful power distribution, decoupling, and thermal engineering. Configuration, clocking, and I/O standards must be checked against the board-level system requirements before release.
Typical applications include industrial Ethernet equipment, high-speed data acquisition, embedded control systems, network packet processing, test-and-measurement platforms, and parallel digital interfaces. The 498 available I/O sites make the device especially useful for systems requiring substantial external connectivity while retaining programmable logic for protocol handling, filtering, control, or data transformation.
PCB implementation should treat this FPGA as a high-pin-count mixed-signal and digital component. Use the manufacturer's package and pinout documentation to assign every power, ground, configuration, clock, and user I/O connection. Place decoupling capacitors close to the relevant supply pins, provide clean clock routing, and use the recommended ball-assignment and layer-transition guidance for high-speed interfaces.
This product page combines the verified Spartan-6 LXT device specifications, package details, sourcing information, and same-footprint alternatives with practical guidance for design engineers evaluating FPGA density, timing grade, thermal margin, PCB complexity, and long-term configuration support.
Mga alternatibo na pwedeng ilagay na XC6SLX100T-2FG900C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
XC6SLX100T-2FGG900I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100T-3FGG900I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100T-4FG900C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100T-3FG900C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100T-1FG900C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC6SLX100T-2FG900C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Spartan-6 LXT FPGA |
| Logic Cells | 101261 cells |
| Logic Resources | 4939776 logic resources |
| User I/O | 498 I/O |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -2 |
| Packhaging | 900-BBGA |
| Bilang ng Pin | 900 balls |
| Device Family | Spartan-6 LXT |
| Programming Technology | Field-programmable logic array |
Gabay sa Pin Configuration ng XC6SLX100T-2FG900C 900-bbga
Pin configuration para sa XC6SLX100T-2FG900C (900-bbga package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC6SLX100T-2FG900C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC6SLX100T-2FG900C ay nararapat para sa 6 aplikasyons: Industrial Ethernet Packet Processing, High-Speed Data Acquisition, Embedded Control and Instrumentation, Parallel Digital Interface Consolidation, Communications Line-Card Support, Test and Measurement Equipment.
Industrial Ethernet Packet Processing
The XC6SLX100T-2FG900C fits industrial Ethernet equipment that must combine protocol handling, packet filtering, data transformation, and supervisory logic. Its 101261 programmable logic cells provide substantial parallel processing capacity, while 498 I/O support multiple interfaces and external control devices without requiring a separate large logic device. The -2 speed grade offers additional timing margin for clocked packet-processing paths compared with lower-speed variants. In a multiport switch or protocol-conversion product, the FPGA can implement fixed MAC functions, statistics counters, packet classification, and custom backplane logic while processors manage configuration and higher-level control.
Inirekomenda
High-Speed Data Acquisition
The XC6SLX100T-2FG900C is appropriate for parallel and high-speed data-acquisition systems where samples must be captured, buffered, filtered, and transferred under deterministic control. The 498 I/O sites allow substantial parallel sensor or ADC connectivity, and the 101261-cell fabric can support capture pipelines, interpolation, error detection, and interface conversion. Using the -2 grade can improve timing margin on demanding clock domains relative to -3 or -4 devices. A practical implementation should partition acquisition, processing, and memory-control paths, verify each I/O standard against the selected data rate, and use the AMD timing constraints to close every clock domain before hardware release.
Inirekomenda
Embedded Control and Instrumentation
The XC6SLX100T-2FG900C can serve as the central programmable controller in complex instruments that combine timing-critical sequencing, parallel data capture, local memory, and multiple I/O interfaces. Its 101261 logic cells are useful for implementing control loops, state machines, trigger logic, data formatting, and fault handling without relying on a collection of fixed-function controllers. The 498 I/O sites simplify connection to sensors, displays, converters, and service interfaces. Design partitioning is important because the large BGA package demands careful escape routing and multilayer PCB construction. Configuration storage, clock distribution, reset sequencing, and watchdogs should be defined early so the design remains deterministic during startup, reset, and fault recovery.
Inirekomenda
Parallel Digital Interface Consolidation
The XC6SLX100T-2FG900C is useful when an equipment design must consolidate numerous parallel interfaces, custom protocol bridges, and legacy data paths into one programmable device. The 498 available I/O positions and 101261 logic cells allow multiple interface domains and supporting state machines to coexist, reducing the number of separate glue-logic devices. The -2 speed grade provides additional timing margin for synchronous buses and pipelined conversions. Engineers should identify every voltage standard and direction before assigning pins, then create timing constraints for asynchronous crossings. Board signal-integrity work is equally important because a pin-compatible FPGA does not eliminate connector, impedance, clock-skew, or return-path requirements.
Inirekomenda
Communications Line-Card Support
The XC6SLX100T-2FG900C can support communications line cards that require programmable backplane logic, framing, scrambling, statistics, and configurable I/O. Its high logic density enables multiple pipeline stages and parallel paths, while the 498 I/O sites can connect transceivers, control signals, clocks, and status interfaces. The -2 grade is suitable for clocked designs that need more timing headroom than lower-speed family members. A line-card implementation should segregate high-speed routed paths from sensitive control logic, define clock domains deliberately, and reserve the configuration mechanism for reliable update or recovery. Thermal and power review is essential because logic utilization and I/O activity determine switching activity and therefore device heating.
Inirekomenda
Test and Measurement Equipment
The XC6SLX100T-2FG900C is well matched to test-and-measurement platforms requiring many digital channels, precise sequencing, pattern generation, acquisition, and analysis. The 101261-cell fabric can implement multiple test engines, counters, timing units, and interface bridges in parallel, while 498 I/O provide extensive channel connectivity. The -2 speed grade can improve timing margin for synchronized instrument paths. Designers should partition resources according to critical channels, establish independent clocking and reset domains, and avoid routing high-fanout control signals through general-purpose fabric. Because the 900-BBGA package is electrically and mechanically demanding, layer assignment, power-plane splitting, decoupling, and thermal monitoring require validation on the actual PCB stack-up.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC6SLX100T-2FG900C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC6SLX100T-2FGG900I | XC6SLX100T-3FGG900I | XC6SLX100T-4FG900C | XC6SLX100T-3FG900C | XC6SLX100T-1FG900C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-BBGA | 900-BBGA | 900-BBGA | 900-BBGA | 900-BBGA | 900-BBGA |
| Device Family | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT |
| Logic Cells | 101261 cells | 101261 cells | 101261 cells | 101261 cells | 101261 cells | 101261 cells |
| Logic Resources | 4939776 resources | 4939776 resources | 4939776 resources | 4939776 resources | 4939776 resources | 4939776 resources |
| User I/O | 498 I/O | 498 I/O | 498 I/O | 498 I/O | 498 I/O | 498 I/O |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Speed Grade | -2 | -2 | -3 | -4 | -3 | -1 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Pangunahing mga Pagkakaiba
- Higher speed grade than lower-grade Spartan-6 alternatives (kumpara saXC6SLX100T-4FG900C)
- Direct same-speed, same-footprint family option (kumpara saXC6SLX100T-2FGG900I)
- Greater timing margin than the -3 family option (kumpara saXC6SLX100T-3FG900C)
Talaan ng Disenyo
Treat the 900-BBGA as a multilayer-board device and follow the AMD package escape-routing guidance. Assign every power, ground, configuration, clock, and user I/O ball using the manufacturer pinout rather than a secondary catalog diagram. Keep high-speed nets on consecutive reference planes where possible, add return-path vias adjacent to signal transitions, and validate the complete stack-up with signal-integrity and power-integrity simulations before fabrication.
Separate the FPGA's documented supply rails and place their decoupling capacitors directly at the associated package balls. Confirm capacitor voltage ratings, effective capacitance after derating, and allowable ripple using the manufacturer power-supply recommendations. Because switching activity changes with logic utilization and I/O activity, evaluate worst-case power rather than relying on typical or lightly loaded values, then size the regulators and copper planes for that condition.
Estimate junction temperature from the worst-case device power, package thermal model, ambient temperature, and actual PCB copper rather than applying a generic package value. The 900-BBGA can concentrate heat around the device, so provide continuous top and bottom copper where the package permits it, minimize thermal barriers beneath the BGA, and define thermal monitoring or derating rules for high-utilization designs. Validate the assembled board in its enclosure because airflow and neighboring heat sources materially affect results.
Do not treat a speed-grade substitution as automatically timing-equivalent. A -1, -3, or -4 device can share the package and logic resources while changing internal timing performance, so rerun static timing analysis after changing the ordering code. Also verify the temperature suffix, configuration interface, exposed-ball requirements, and complete pinout. A placement change can alter congestion and clock skew even when the logical design is unchanged.
Create constraints for every external interface and define asynchronous crossings explicitly. Add series termination where the selected I/O standard and edge rate require it, preserve continuous return paths, and isolate clocks from high-current outputs. Use the AMD implementation tools to confirm routing and timing after any package or speed-grade substitution, then validate the PCB stack-up with the intended production material and components.
Impormasyon ng Pagsunod sa Kautusan
The C ordering suffix identifies a commercial product, but it does not by itself establish RoHS, REACH, halogen-free, or conflict-minerals compliance. AEC-Q100 qualification is not indicated for this device.