XC7K325T-1FBG900C - 326K-Logic Kintex-7 FPGA | AMD
MPN: XC7K325T-1FBG900C ✓ NakahandaXC7K325T-1FBG900C Ulas
A field-programmable gate array is a semiconductor whose logic, memory, signal-processing, and I/O resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a form of digital semiconductor. The Kintex-7 family balances performance, power, connectivity, and cost for communications, industrial, scientific, and embedded systems.
The XC7K325T-1FBG900C provides 25,475 configurable logic blocks, 840 DSP48E1 slices, and 16,020 Kb of block RAM. Its 500 I/Os support broad external connectivity, while 16 GTX transceivers enable high-speed serial links. The -1 speed grade, commercial temperature designation, and 0.970 V to 1.030 V core-voltage range distinguish this ordering code within the Kintex-7 portfolio.
Kintex-7 devices integrate programmable logic with DSP processing, block RAM, high-speed transceivers, and memory-interface resources. The GTX transceivers support protocols including PCI Express Gen3 and 10 Gigabit Ethernet, allowing a single FPGA to implement high-bandwidth links alongside parallel processing. The large 900-ball FCBGA footprint supports dense board-level integration but requires careful power delivery, escape routing, and thermal design.
Typical uses include network switches, industrial vision, high-throughput data acquisition, test and measurement, radio-frequency processing, and embedded control systems with substantial parallel logic. The 16 high-speed lanes also make the device suitable for endpoint, aggregation, storage, and signal-processing designs where serial connectivity and DSP capacity are both valuable.
Place stable decoupling close to the core, transceiver, and I/O supply pins, and follow the AMD package-pinout files and UG475 when assigning balls and designing escape routing. Because the 900-ball FCBGA is a complex, high-pin-count package, layer count, via current, thermal vias, and ball-grid escape strategy directly affect signal integrity, assembly yield, and reliability.
This product page combines the device specifications, package constraints, order-code distinctions, and engineering guidance needed to plan a Kintex-7 design. It also identifies same-package alternatives and clarifies the speed-grade and temperature choices that require design-level verification before replacement.
Mga alternatibo na pwedeng ilagay na XC7K325T-1FBG900C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7K325T-1FBG900C (parehas na form factor at footprint) — pagkakaiba sa Package, Process Technology, Temperature Grade, Speed Grade, Block RAM.
XC7K325T-1FBG900I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7K325T-2FBG900C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7K325T-2FBG900I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7K325T-3FBG900C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7K325T-2LFBG900C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7K325T-1FBG900C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Kintex-7 FPGA |
| Logic Cells | 326,080 cells |
| Configurable Logic Blocks | 25,475 blocks |
| DSP48E1 Slices | 840 slices |
| Block RAM | 16,020 Kb |
| User I/Os | 500 I/Os |
| GTX Transceivers | 16 transceivers |
| Maximum GTX Data Rate | 12.5 Gb/s per lane |
| Maximum Logic Frequency | 400 MHz |
| Process Technology | 28 nm HKMG |
| Core Voltage Range | 0.970 V to 1.030 V |
| Packhaging | 900-ball FCBGA, 31 x 31 mm |
| Speed Grade | -1 |
| Temperature Grade | Commercial, 0°C to +85°C |
| High-Speed Protocol Support | PCI Express Gen3 and 10 Gigabit Ethernet |
Gabay sa Pin Configuration ng XC7K325T-1FBG900C 900-ball fcbga, 31 x 31 mm
Pin configuration para sa XC7K325T-1FBG900C (900-ball fcbga, 31 x 31 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7K325T-1FBG900C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7K325T-1FBG900C ay nararapat para sa 6 aplikasyons: 10 Gigabit Ethernet Network Switching, PCI Express Gen3 Endpoint, Industrial Vision and Image Processing, High-Speed Data Acquisition, Radio-Frequency Signal Processing, Test and Measurement Instrumentation.
10 Gigabit Ethernet Network Switching
The XC7K325T-1FBG900C fits Ethernet switching and packet-processing designs because it combines 16 GTX transceivers, 326,080 logic cells, and 16,020 Kb of block RAM. The GTX resources support 10 Gigabit Ethernet links at up to 12.5 Gb/s per lane, while the programmable logic can implement queues, packet classifiers, lookup tables, and traffic-management engines. Using a single FPGA can reduce board area and inter-chip traffic, but the 900-ball FCBGA requires a multilayer PCB with carefully controlled power integrity and transceiver-routing geometry.
Inirekomenda
PCI Express Gen3 Endpoint
The XC7K325T-1FBG900C can implement a PCI Express Gen3 endpoint while allocating separate logic and memory resources to DMA, data processing, and system control. Its 16 GTX transceivers provide the physical-layer resources for high-speed serial connectivity, while 840 DSP48E1 slices can accelerate filters or transforms carried by transferred data. The -1 speed grade must be checked against the endpoint's timing requirements, and board routing must provide continuous reference planes, controlled impedance, and appropriate high-speed trace lengths.
Inirekomenda
Industrial Vision and Image Processing
The XC7K325T-1FBG900C is suitable for industrial vision because its 840 DSP48E1 slices support parallel filtering and pixel arithmetic, while 500 I/Os can connect multiple image sensors and acquisition devices. Its 16,020 Kb of block RAM accommodates line buffers, lookup structures, and short processing windows. Commercial operation from 0°C to +85°C matches many controlled factory environments, although systems requiring wider environmental limits should select the industrial-temperature suffix. Image timing, sensor-clock isolation, and power sequencing require deliberate validation.
Inirekomenda
High-Speed Data Acquisition
The XC7K325T-1FBG900C supports high-throughput acquisition by combining parallel I/O, block RAM, DSP processing, and serial GTX links in one programmable device. Up to 500 user I/Os can interface with ADCs, counters, clocks, or parallel data sources, while the GTX section can transfer processed results through PCI Express or 10 Gigabit Ethernet. The 400 MHz maximum logic frequency supports demanding timing, but actual throughput depends on pin-bank constraints, routing congestion, clocking architecture, memory bandwidth, and the selected data-processing pipeline.
Inirekomenda
Radio-Frequency Signal Processing
The XC7K325T-1FBG900C is well suited to radio-frequency and communications signal-processing systems that require parallel filtering, modulation, demodulation, and protocol handling. Its 840 DSP48E1 slices provide dedicated multiply-accumulate resources, while 16,020 Kb of block RAM supports sample buffers and coefficient storage. The 28 nm Kintex-7 implementation combines these resources with 16 GTX transceivers for high-speed data movement. System-level performance still depends on sample rates, clock jitter, converter interfaces, transceiver equalization, and timing closure.
Inirekomenda
Test and Measurement Instrumentation
The XC7K325T-1FBG900C can implement programmable logic for test and measurement instruments because it offers substantial logic, RAM, DSP, I/O, and transceiver resources in one device. A designer can integrate acquisition control, pattern generation, digital signal analysis, and high-speed data transfer while retaining programmable behavior. Its 400 MHz logic capability supports demanding timing, although analog front ends, trigger latency, clock distribution, and deterministic I/O timing remain separate system-engineering tasks. The dense package also requires a stable multilayer PCB and comprehensive thermal testing.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7K325T-1FBG900C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7K325T-1FBG900I | XC7K325T-2FBG900C | XC7K325T-2FBG900I | XC7K325T-3FBG900C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | FBG900 | FBG900 - same package family | FBG900 - same package family | FBG900 - same package family | FBG900 - same package family |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| User I/Os | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os |
| DSP48E1 Slices | 840 slices | 840 slices | 840 slices | 840 slices | 840 slices |
| Block RAM | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb |
| GTX Transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers |
| Speed Grade | -1 | -1 | -2 | -2 | -3 |
| Temperature Grade | Commercial, 0°C to +85°C | Industrial | Commercial, 0°C to +85°C | Industrial | Commercial, 0°C to +85°C |
Pangunahing mga Pagkakaiba
- Commercial -1 speed grade with extended logic and I/O resources (kumpara saXC7K325T-2FBG900C)
- Direct industrial-temperature migration within the FBG900 family (kumpara saXC7K325T-1FBG900I)
- High-speed serial and DSP capacity in one programmable device (kumpara saXC7K325T-3FBG900C)
Talaan ng Disenyo
Use AMD's FBG900-specific package files and UG475 to create the ball map, power-domain assignments, and escape routes. A 31 x 31 mm FCBGA with 900 balls generally requires a multilayer PCB with short via fanouts and tightly controlled return paths. Keep sensitive clock and transceiver routes away from noisy power stages, and confirm that every ball has an intentional connection or approved no-connect treatment.
Separate the core, transceiver, and I/O supply paths according to the AMD power-supply design guidance, and place high-frequency decoupling close to the relevant package balls. Validate steady-state and transient voltage limits under the worst expected power utilization. The XC7K325T-1FBG900C contains both programmable logic and 16 GTX transceivers, so simultaneous processor and link activity can produce demanding supply-transient conditions that must be checked with realistic workloads.
Estimate junction temperature from actual logic, DSP, RAM, I/O, and GTX utilization rather than a nominal device-power figure. Account for ambient temperature, board copper, airflow, enclosure conditions, and the package thermal path. Estimated: power dissipation equals the sum of measured or modeled rail power; junction temperature equals ambient temperature plus device power multiplied by the effective board-and-package thermal resistance. Validate this estimate with thermal simulation and board measurements.
Route GTX channels as controlled-impedance differential pairs with continuous reference planes and compliance-focused via structures. Define transceiver clocking, equalization, and board-level channel-loss requirements before component placement. Maintain skew and length discipline between paired nets, and apply AMD's high-speed layout guidance to connectors, package transitions, retimer or driver options, and test-point structures.
Impormasyon ng Pagsunod sa Kautusan
The ordering-code C suffix identifies the commercial temperature grade. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact device.