XC7Z030-2SBG485E - 800MHz Zynq-7000 SoC | AMD/Xilinx
MPN: XC7Z030-2SBG485E ✓ NakahandaXC7Z030-2SBG485E Ulas
A Zynq-7000 SoC is an adaptive SoC that combines an ARM microprocessor system with FPGA fabric. This hierarchy places the device between a general-purpose microprocessor and a conventional FPGA, allowing software-controlled functions and hardware-accelerated datapaths to share one package. Unlike a separate processor and FPGA, the integrated architecture can provide a lower-latency interface between software and programmable logic while reducing board-level component count.
The XC7Z030-2SBG485E provides two ARM Cortex-A9 processor cores operating at 800 MHz, 125K FPGA logic cells, and 256 KB of on-chip memory according to the AMD product listing. Its speed-grade-2 suffix identifies the performance grade, while the extended-temperature suffix identifies its environmental grade. The device also includes CoreSight technology for processor and system debugging. These characteristics make it suitable for embedded control, industrial automation, communications equipment, instrumentation, and mixed software-and-logic systems.
The Zynq architecture separates the hard processor system from the programmable FPGA resources. Software executes in the ARM processing environment, while designers can implement parallel datapaths, custom interfaces, accelerators, and control logic in the FPGA fabric. The integrated device is particularly useful when deterministic data movement, high-throughput parallel processing, or direct access between software and hardware is important. Designers should use AMD development tools and generated constraints to validate placement, routing, timing, and board-level connectivity.
Typical designs include industrial gateways, factory automation controllers, test and measurement platforms, video-processing systems, embedded servers, and communication equipment. The dual Cortex-A9 configuration supports multitasking and control software, while the 125K logic cells allow custom hardware acceleration or interface consolidation. Compared with a processor-only design, the FPGA resources can execute parallel operations without depending on general-purpose software timing.
PCB implementation requires careful attention to the 484-FCBGA layout, power rails, decoupling, clocking, and high-speed escape routing. Place input and output capacitors close to their associated device pins, use the manufacturer reference design as the baseline for stack-up and power planning, and inspect all XDC constraints for pin placement and timing. The 19 mm by 19 mm package also demands thermal via placement and adequate copper area for heat dissipation.
This product page combines manufacturer and distributor technical facts with practical design guidance, package references, application analysis, and validated drop-in alternatives. It is intended to help engineers assess the XC7Z030-2SBG485E, compare it with same-package speed and temperature variants, and plan a robust Zynq-7000 PCB implementation.
Mga alternatibo na pwedeng ilagay na XC7Z030-2SBG485E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z030-2SBG485E (parehas na form factor at footprint) — pagkakaiba sa Package, Speed Grade.
XC7Z030-2SBG485I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z030-1SBG485C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z030-2SBG485C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z030-1SBG485I
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
XC7Z030-1SBG485E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z030-2SBG485E Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Zynq-7000 adaptive system-on-chip |
| Processor Architecture | Dual ARM Cortex-A9 MPCore |
| Processor Core Count | 2 cores |
| Processor Frequency | 800 MHz |
| FPGA Logic Cells | 125K cells |
| FPGA Family | Kintex-7 |
| On-Chip Memory | 256 KB |
| Debug Support | CoreSight |
| Packhaging | 484-FCBGA (19 mm x 19 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Speed Grade | Grade 2 |
| Temperature Grade | Extended |
| Manufacturer | AMD/Xilinx |
| Tindminan RoHS | Compliant |
| Programmable Logic Type | FPGA |
| Embedded Processing | ARM Cortex-A9 MPCore |
Gabay sa Pin Configuration ng XC7Z030-2SBG485E 484-fcbga (19 mm x 19 mm)
Pin configuration para sa XC7Z030-2SBG485E (484-fcbga (19 mm x 19 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z030-2SBG485E.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z030-2SBG485E ay nararapat para sa 6 aplikasyons: Industrial Automation Controller, Factory Data Gateway, Test and Measurement Instrument, Video and Image Processing System, Communication Equipment, Embedded Control Platform.
Industrial Automation Controller
The XC7Z030-2SBG485E fits industrial automation controllers because its dual Cortex-A9 cores can run control, communications, and supervisory software while the 125K-cell Kintex-7 fabric executes parallel control loops or protocol handling. At an 800 MHz processor rating, the device supports responsive multitasking without requiring a separate FPGA. The integrated architecture also permits the programmable logic to exchange data with processor peripherals through a lower-latency path than separate chips. For a machine controller, configure deterministic I/O in the FPGA fabric, reserve the ARM cores for motion sequencing and diagnostics, and use AMD timing constraints to verify every clock domain. The extended-temperature grade must be checked against the cabinet temperature and expected industrial operating profile.
Inirekomenda
Factory Data Gateway
A factory data gateway can use the XC7Z030-2SBG485E to combine Linux-based network software with dedicated packet-processing hardware. The two 800 MHz ARM Cortex-A9 cores handle protocol stacks, management, storage, and secure connectivity, while the 125K FPGA cells accelerate filtering, framing, counters, or custom interfaces. This division of labor improves throughput without forcing every operation onto the processor bus. Place time-critical packet processing and interface termination in the programmable logic, then exchange structured results with software through a defined register or memory interface. Board planning should reserve pin resources for supported PHY and serial links, provide independent clocking for externally sourced interfaces, and constrain all I/O timing against the selected reference design.
Inirekomenda
Test and Measurement Instrument
The XC7Z030-2SBG485E is suitable for test and measurement equipment requiring flexible timing, acquisition, and signal-processing logic alongside an embedded operating system. The FPGA portion can implement counters, trigger logic, digital signal processing, or high-speed data capture, while the dual Cortex-A9 cores manage instrument control, calibration, data analysis, and user interfaces. Its 800 MHz ARM rating supports responsive control software without separating the processor and acquisition engine into distinct devices. Engineers should isolate analog and sensitive clock circuits from high-speed digital activity, use the manufacturer reference architecture for power and grounding, and apply timing constraints for every acquisition clock and data path. Thermal design must account for activity in both the processor subsystem and FPGA fabric.
Inirekomenda
Video and Image Processing System
The XC7Z030-2SBG485E can divide video workloads between deterministic FPGA logic and the ARM Cortex-A9 processor subsystem. Parallel pixel operations, color conversion, filtering, or frame pre-processing can run in the 125K-cell Kintex-7 fabric, while the 800 MHz processor cores control buffers, perform higher-level analysis, and manage the operating system. This architecture avoids forcing repeated pixel operations through a general-purpose processor, improving throughput and determinism. Designers should place video interfaces close to their assigned I/O banks, use source-synchronous clocking where required, and constrain timing for pixel, synchronization, and control signals. Because the device is a programmable SoC rather than a video-specific converter, the board must provide suitable memory and physical video interfaces.
Inirekomenda
Communication Equipment
The XC7Z030-2SBG485E fits communication equipment that requires flexible packet handling, protocol support, and embedded management. The dual Cortex-A9 cores can supervise a network stack or control plane, while the Kintex-7 fabric implements specialized datapaths, framing, channelization, or interfaces that benefit from parallelism. Keeping both functions in one device can reduce external component count and simplify control of shared data paths. The 800 MHz speed grade provides a defined processor operating point for control applications, and CoreSight assists hardware and software debugging. For deployment, define each clock domain before placement, constrain high-speed serial and parallel interfaces, and validate signal integrity across the complete PCB stack-up. Power and thermal capacity should support sustained processor and FPGA activity.
Inirekomenda
Embedded Control Platform
The XC7Z030-2SBG485E is useful in embedded control platforms that combine operating-system-based sequencing with hardware-level timing and I/O. The dual ARM Cortex-A9 cores can run networking, storage, diagnostics, and application software, while programmable logic handles deterministic interfaces, custom accelerators, or direct sensor and actuator connections. This arrangement allows control paths to bypass software scheduling where deterministic behavior is essential. At the board level, use the SBG485 package placement information to map every ball, maintain suitable power decoupling around the relevant rails, and provide independent clocking wherever the reference design requires it. The extended-temperature suffix should be reconciled with the enclosure temperature. Before production, run timing analysis, power estimation, thermal analysis, and software-device initialization checks as one combined sign-off process.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z030-2SBG485E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z030-2SBG485I | XC7Z030-1SBG485C | XC7Z030-2SBG485C | XC7Z030-1SBG485I | XC7Z030-1SBG485E |
|---|---|---|---|---|---|---|
| Package | 484-FCBGA (19 mm x 19 mm) | 484-FCBGA (19 mm x 19 mm) | 484-FCBGA (19 mm x 19 mm) | 484-FCBGA (19 mm x 19 mm) | 484-FCBGA (19 mm x 19 mm) | 484-FCBGA (19 mm x 19 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor Frequency | 800 MHz | 800 MHz | 667 MHz | 800 MHz | 667 MHz | 667 MHz |
| Processor Cores | 2 ARM Cortex-A9 cores | 2 ARM Cortex-A9 cores | 2 ARM Cortex-A9 cores | 2 ARM Cortex-A9 cores | 2 ARM Cortex-A9 cores | 2 ARM Cortex-A9 cores |
| FPGA Logic Cells | 125K cells | 125K cells | 125K cells | 125K cells | 125K cells | 125K cells |
| Speed Grade | Grade 2 | Grade 2 | Grade 1 | Grade 2 | Grade 1 | Grade 1 |
| Temperature Grade | Extended | Industrial | Commercial | Commercial | Industrial | Extended |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Pangunahing mga Pagkakaiba
- Higher listed processor operating point (kumpara saXC7Z030-1SBG485C)
- Extended-temperature option within the same SBG485 footprint (kumpara saXC7Z030-2SBG485I)
- Speed and environmental grade remain unchanged (kumpara saXC7Z030-2SBG485C)
Talaan ng Disenyo
Use the AMD SBG485 package placement diagram as the authority for every ball assignment. The XC7Z015-CLG485 device is not an exact electrical equivalent: AMD identifies two positions that are not connected on XC7Z015-CLG485 but are connected on XC7Z030-SBG485. Preserve those XC7Z030 connections when planning shared board fixtures or compatibility features.
Start the power architecture from the AMD reference design and datasheet rather than treating the FCBGA rails as interchangeable generic supplies. Place decoupling capacitors close to their assigned device balls, preserve the recommended power-plane and via arrangement, and validate every rail for both processor and FPGA activity. Check the device initialization sequence in the official toolchain so software-driven rail and clock requirements match the board.
Place a thermal via array beneath the FCBGA according to the manufacturer package guidance and provide uninterrupted top-layer copper where the land pattern permits. Estimate junction temperature under the worst expected processor and logic utilization rather than an idle condition. Validate the enclosure airflow, copper spreading, and adjacent heat sources because sustained FPGA activity can change thermal results substantially.
Constrain every external interface and clock in the AMD XDC design flow, including source-synchronous, memory, serial, and programmable I/O paths. Match length and routing topology to the selected interface specification, keep clock inputs away from high-speed data lanes, and use the board stack-up defined by the reference design. Post-route timing must be clean before configuration is released for production.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is identified for the exact XC7Z030-2SBG485E listing. No automotive qualification or separate REACH, lead-free, halogen-free, or conflict-minerals statement was established for this exact ordering code.