XC9536XL-7CSG48C - 36-Macrocell 3.3V CPLD | AMD
MPN: XC9536XL-7CSG48C ✓ NakahandaXC9536XL-7CSG48C Ulas
A complex programmable logic device, or CPLD, is a programmable-logic architecture that combines multiple macrocells and programmable interconnect resources into a single integrated circuit. The XC9500 family provides a practical bridge between simple GAL-type logic and larger FPGAs. It belongs to the hierarchy programmable logic device → CPLD → programmable-logic semiconductor, offering nonvolatile configuration and in-system programmability for glue logic, control logic, and interface adaptation.
The XC9536XL provides 36 macrocells and 36 available I/O lines in a compact CSBGA-48 package. Its 7.5 ns pin-to-pin propagation-delay grade supports moderate-speed control and data-routing tasks, while the stated 138.88 MHz maximum clock frequency establishes the device’s operating performance ceiling. Flash-based configuration supports at least 10,000 program and erase cycles, and JTAG Boundary Scan Test provides a structured method for board-level testing.
Programmable architecture makes the same physical device useful across multiple board revisions because logic equations, interconnections, and I/O behavior can be changed without replacing the package. The 3.3 V supply arrangement and 48-ball surface-mount format support compact industrial, communications, control, and embedded-equipment designs. Commercial-temperature selection is denoted by the C suffix, while the separate I suffix identifies an industrial-temperature option in the same device family.
Typical uses include bus decoding, address and command generation, legacy-interface bridging, state-machine control, peripheral interconnection, and board-level glue logic. The combination of 36 macrocells and 36 I/Os is particularly useful when several fixed-function gates would otherwise require several separate standard logic devices. JTAG Boundary Scan Test also supports board bring-up and production test in multi-IC assemblies.
PCB implementation requires careful treatment of the fine-pitch CSBGA footprint, power and ground distribution, and high-speed clock routing. The design should use the package-specific land pattern and ball assignment from the manufacturer package information, maintain continuous return paths beneath clock nets, and route JTAG signals with attention to signal integrity. Programming should follow the AMD/Xilinx device-programming procedure for the selected CPLD family.
This page combines the manufacturer’s XC9536XL device documentation with package, programming, comparison, and replacement information for engineers evaluating the XC9536XL-7CSG48C. It also identifies same-package speed- and temperature-grade alternatives while preserving the distinction between a true PCB drop-in option and a merely functionally similar CPLD.
Mga alternatibo na pwedeng ilagay na XC9536XL-7CSG48C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC9536XL-7CSG48C (parehas na form factor at footprint) — pagkakaiba sa Package, Architecture, RoHS Status, Temperature Grade, Device Type.
XC9536XL-7CS48C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC9536XL-7CSG48I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC9536XL-5CSG48C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC9536XL-10CSG48C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC9536XL-7CS48I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC9536XL-7CSG48C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Complex programmable logic device (CPLD) |
| Architecture | XC9500 family |
| Number of Macrocells | 36 |
| Number of I/O Lines | 36 |
| Nominal Supply Voltage | 3.3 V |
| Pin-to-Pin Propagation Delay | 7.5 ns |
| Maksimum na Taktiko ng Oras | 138.88 MHz |
| Usable Gates | 800 gates |
| Programmable Type | In-system programmable Flash |
| Minimum Program and Erase Cycles | 10,000 cycles |
| Boundary Scan | JTAG Boundary Scan Test (BST) |
| Packhaging | 48-ball CSBGA, 7 mm × 7 mm |
| Number of Terminals | 48 balls |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Commercial |
| Lead-Free Status | Lead free |
| Tindminan RoHS | RoHS compliant |
Gabay sa Pin Configuration ng XC9536XL-7CSG48C 48-ball csbga, 7 mm × 7 mm
Pin configuration para sa XC9536XL-7CSG48C (48-ball csbga, 7 mm × 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC9536XL-7CSG48C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC9536XL-7CSG48C ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, Bus Interfacing and Address Decoding, Embedded Peripheral Interconnection, Communications Equipment Control Path, Test and Measurement Front Ends, Programmable Security and Access Control.
Industrial Control and Automation
The XC9536XL-7CSG48C fits compact industrial control boards where a controller must combine deterministic logic with programmable board-specific functions. Its 36 macrocells and 36 I/O lines can implement command decoding, interlocks, status registers, timing, and peripheral routing without requiring a larger FPGA. The 7.5 ns propagation-delay grade supports general control paths, while the 138.88 MHz maximum clock frequency provides useful timing margin for synchronized machine-control logic. Its 48-ball CSBGA also allows a compact footprint. If the enclosure includes wide temperature excursions or severe industrial noise, evaluate the XC9536XL-7CSG48I and complete the board-level EMC and thermal validation.
Inirekomenda
Bus Interfacing and Address Decoding
The XC9536XL-7CSG48C is well suited to bus decoding, address qualification, chip-select generation, and legacy interface adaptation. Thirty-six macrocells allow multiple equations and state-machine functions to be combined, while the 36 available I/Os provide connections to processor, memory, and peripheral buses. A 7.5 ns logic delay can support moderate-speed control strobes and address validation paths. Designers should establish the actual clock, setup, hold, and skew requirements because the 138.88 MHz maximum clock frequency is not a guarantee that every pin-to-pin path will meet that rate. JTAG Boundary Scan Test also provides useful board-level access for detecting opens and shorts in a densely connected control assembly.
Inirekomenda
Embedded Peripheral Interconnection
In an embedded equipment design, the XC9536XL-7CSG48C can act as a compact programmable interface between a host processor and mixed peripherals. Its 36 macrocells support protocol state machines, command formatting, interrupt masking, and programmable I/O behavior, while 36 I/Os provide a practical resource budget for multiple small interfaces. The 3.3 V device is appropriate for systems designed around that supply level, and Flash-based in-system programming allows board revisions to reuse the same physical footprint. The designer should reserve attention to clock jitter, output skew, and package-ball escape routing, particularly when the peripheral interface operates near the device’s upper stated frequency.
Inirekomenda
Communications Equipment Control Path
The XC9536XL-7CSG48C can handle supervisory control logic in communications equipment, including channel-enable sequencing, status aggregation, alarm masking, and low-speed supervisory protocols. The 36-macrocell resource count permits several related functions to be consolidated, while the 48-ball CSBGA package supports space-constrained line cards. Its 7.5 ns propagation-delay grade is meaningful for synchronous control paths but should be checked against transceiver turnaround and clock-recovery requirements. Differential or high-speed data channels should remain outside the CPLD unless the complete implementation satisfies the manufacturer’s timing and I/O specifications. JTAG programming and boundary scan are valuable during production test of multi-channel equipment.
Inirekomenda
Test and Measurement Front Ends
The XC9536XL-7CSG48C can support control sequencing, trigger logic, mode selection, and instrumentation state management in test and measurement equipment. Its 36 macrocells permit several small logic blocks to replace discrete gate packages, and the 36 I/Os offer flexible connections to front-end boards. The 7.5 ns propagation delay and 138.88 MHz stated maximum clock frequency make it appropriate for moderate-speed digital coordination rather than high-bandwidth signal processing. Sensitive analog or high-speed acquisition circuitry should retain dedicated devices. Engineers should use the JTAG Boundary Scan Test capability to simplify board interconnect verification and use the manufacturer’s package information to maintain adequate escape routing from the CSBGA footprint.
Inirekomenda
Programmable Security and Access Control
The XC9536XL-7CSG48C can implement programmable access-control, interlock, and security-sequencing logic around a larger embedded system. Suitable tasks include permission masks, key-state tracking, alarm latching, tamper-event sequencing, and configuration-controlled command routing. Its nonvolatile programmable architecture helps retain logic definitions across power cycles, and in-system programming supports controlled updates during production or maintenance. For security-critical designs, engineers should still add dedicated tamper-resistant functions where required and should not treat a general-purpose CPLD as a substitute for a certified cryptographic component. Timing closure must include worst-case paths at the selected 7 ns speed grade and the required ambient temperature range.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC9536XL-7CSG48C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC9536XL-7CS48C | XC9536XL-7CSG48I | XC9536XL-5CSG48C | XC9536XL-10CSG48C | XC9536XL-7CS48I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 48-ball CSBGA, 7 mm × 7 mm | 48-ball CSBGA, 7 mm × 7 mm | 48-ball CSBGA, 7 mm × 7 mm | 48-ball CSBGA, 7 mm × 7 mm | 48-ball CSBGA, 7 mm × 7 mm | 48-ball CSBGA, 7 mm × 7 mm |
| Macrocells | 36 | 36 | 36 | 36 | 36 | 36 |
| I/O Lines | 36 | 36 | 36 | 36 | 36 | 36 |
| Nominal Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Propagation-Delay Grade | 7.5 ns | 7 ns grade | 7 ns grade | 5 ns grade | 10 ns grade | 7 ns grade |
| Temperature Grade | Commercial | Commercial | Industrial | Commercial | Commercial | Industrial |
| Programmable Type | In-system programmable Flash | In-system programmable Flash | In-system programmable Flash | In-system programmable Flash | In-system programmable Flash | In-system programmable Flash |
| Boundary Scan | JTAG Boundary Scan Test | JTAG Boundary Scan Test | JTAG Boundary Scan Test | JTAG Boundary Scan Test | JTAG Boundary Scan Test | JTAG Boundary Scan Test |
Pangunahing mga Pagkakaiba
- Balanced 7.5 ns speed grade in a compact 48-ball package (kumpara saXC9536XL-10CSG48C)
- Higher performance alternative remains pin compatible (kumpara saXC9536XL-5CSG48C)
- Commercial and industrial temperature choices share one package (kumpara saXC9536XL-7CSG48I)
- Direct timing-equivalent non-G package-family option (kumpara saXC9536XL-7CS48C)
Talaan ng Disenyo
Implement the XC9536XL-7CSG48C with the manufacturer’s 48-ball CSBGA land pattern and verify ball orientation against the assembly drawing before releasing artwork. Fine-pitch ball escape routing should preserve access to power, ground, JTAG, and functional I/O balls. A complete ball-by-ball assignment was not confirmed, so use the pin-description table in DS058 and the package drawing rather than deriving connections from the commercial suffix.
Route clock and JTAG signals as controlled-impedance nets with continuous reference planes, short stubs, and ESD protection located where the board interface requires it. The 138.88 MHz maximum clock frequency is a device limit, not a guarantee for every routed path. Static timing analysis should include the selected 7.5 ns speed grade, external setup and hold requirements, clock skew, connector loading, and PCB effects before the design is released for production.
Follow the decoupling values and placement guidance in DS058 for the XC9536XL supply pins. Place the required ceramic capacitors adjacent to the relevant package balls and provide a low-impedance distribution network for every ground connection. Do not assume that an exposed-center-ball arrangement alone provides adequate current return; trace-area geometry, via distribution, and plane connectivity must support the actual switching and output-current demands.
Do not treat the -5, -7, and -10 identifiers as interchangeable without retiming the design. The XC9536XL-5CSG48C is faster, while the XC9536XL-10CSG48C is slower and may violate paths that pass with the 7.5 ns grade. Likewise, select the I suffix when the required environmental range exceeds the commercial-grade conditions. Validate the exact replacement against timing, temperature, power, ball map, and programming requirements.
Impormasyon ng Pagsunod sa Kautusan
RoHS-compliant and lead-free status are identified for the exact part. No REACH, halogen-free, conflict-minerals, or AEC-Q100 declaration was confirmed.