XMC4104Q48K128ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
MPN: XMC4104Q48K128ABXUMA1 ✓ NakahandaXMC4104Q48K128ABXUMA1 Ulas
A microcontroller is a semiconductor integrated circuit that integrates a processor core, memory, peripheral controllers, and communication interfaces into one device. The ARM Cortex-M4 core used in the XMC4000 family supports efficient embedded control, while the XMC4104 combines that processing capability with 128 KB of Flash for firmware. Within the semiconductor hierarchy, this device is a microcontroller, embedded processor, and programmable logic device.
The XMC4104Q48K128ABXUMA1 operates at 80 MHz and includes 128 KB of programmable Flash memory. Its 3.3 V supply designation supports integration with 3.3 V embedded systems. The PG-VQFN-48-53 mechanical format places 48 electrical pins in a surface-mount package with 53 total lead positions, including the exposed thermal pad and associated package geometry.
The XMC4000 family is positioned for industrial applications and combines a high-performance ARM Cortex-M4 core with energy-efficient embedded operation. Infineon describes the family as optimized for industrial applications. At 80 MHz, the processor provides a substantial operating-speed margin for control loops, communication handling, and supervisory tasks when compared with lower-clock general-purpose microcontrollers.
Typical implementation areas include industrial automation equipment, sensor and actuator controllers, embedded communication modules, connected industrial nodes, and compact control platforms. The 128 KB Flash capacity is particularly useful for programs that include device drivers, communication stacks, application logic, diagnostics, and field-update mechanisms. A new design should also account for RAM, peripheral coverage, and application-specific certification requirements before finalizing the MCU.
The primary design consideration is the combination of compact VQFN packaging and the exposed pad. Follow the manufacturer’s pin, exposed-pad, thermal, and PCB-layout requirements exactly. Use the pin-description table in the Infineon manufacturer datasheet when assigning tracks, and preserve adequate copper beneath the exposed pad for electrical and thermal performance.
This page organizes the verified XMC4104Q48K128ABXUMA1 specifications with application guidance, design notes, and replacement checks. It also identifies the absence of confirmed pin-to-pin drop-in equivalents so engineers can avoid treating a superficially similar microcontroller as a direct substitute.
Mga alternatibo na pwedeng ilagay na XMC4104Q48K128ABXUMA1 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XMC4104Q48K128ABXUMA1 (parehas na form factor at footprint) — pagkakaiba sa Package, Supply Voltage.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboXMC4104Q48K128ABXUMA1 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Manufacturer | Infineon Technologies |
| Microcontroller Family | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| Maksimum na Taktiko ng Oras | 80 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| Processor Architecture | 32-bit |
| Volte ng Pagbibigay | 3.3 V |
| Hanay ng Temperature na Operasyon | -40 °C to +125 °C |
| Packhaging | PG-VQFN-48-53 |
| Bilang ng Pin | 48 pins |
| Total Lead Positions | 53 positions |
| Uri ng Pagpapasok | Surface mount |
| Application Class | Industrial applications |
Gabay sa Pin Configuration ng XMC4104Q48K128ABXUMA1 pg-vqfn-48-53
Pin configuration para sa XMC4104Q48K128ABXUMA1 (pg-vqfn-48-53 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XMC4104Q48K128ABXUMA1.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XMC4104Q48K128ABXUMA1 ay nararapat para sa 6 aplikasyons: Industrial Automation Controllers, Sensor Monitoring Hubs, Connected Industrial Nodes, Actuator Control Systems, Embedded Communication Modules, Power and Equipment Management.
Industrial Automation Controllers
The XMC4104Q48K128ABXUMA1 fits compact industrial automation controllers that require an 80 MHz ARM Cortex-M4 core and 128 KB of Flash without moving to a larger package. It can coordinate control logic, operating-state monitoring, communications, and diagnostics for machinery or process equipment. Its -40 °C to +125 °C operating range is useful for industrial environments, while the 3.3 V supply supports integration with common embedded rails. Before assigning sensors or actuators, verify the required ADC, timer, communication, and I/O functions against the manufacturer datasheet.
Sensor Monitoring Hubs
The XMC4104Q48K128ABXUMA1 is appropriate for a distributed sensor-monitoring hub that gathers measurements, applies filtering, records operating conditions, and forwards information to a higher-level controller. Its 80 MHz Cortex-M4 performance provides room for concurrent control and communication routines, while 128 KB of Flash can hold drivers, protocol handlers, and application firmware. The 3.3 V operating designation fits low-voltage embedded systems. Confirm the required analog-input count, accuracy, serial interfaces, and memory requirements before choosing the MCU for a specific sensing architecture.
Connected Industrial Nodes
A connected industrial node can use the XMC4104Q48K128ABXUMA1 to combine local control with upstream communication. The 80 MHz ARM Cortex-M4 core supports protocol processing and supervisory logic, and the 128 KB Flash budget is suitable for firmware, data formatting, diagnostics, and configuration management. Its industrial temperature range helps support deployment outside room-temperature office environments. Check the exact serial-peripheral mix, protocol support, RAM capacity, and external transceiver requirements in the Infineon manufacturer datasheet before finalizing the node architecture.
Actuator Control Systems
The XMC4104Q48K128ABXUMA1 can serve as the control processor in compact actuator systems where deterministic timing, local feedback, and communication are required. Its 80 MHz operating frequency leaves processing margin for control-loop software, status reporting, and fault handling, while 128 KB of Flash accommodates application code and embedded drivers. The compact PG-VQFN-48-53 package supports space-constrained board construction. Validate timer resolution, PWM resources, fault inputs, output drivers, and thermal performance against the manufacturer datasheet before driving power stages.
Embedded Communication Modules
The XMC4104Q48K128ABXUMA1 is suitable for embedded communication modules that use a microcontroller to manage framing, configuration, diagnostics, and application-level control. Its ARM Cortex-M4 architecture provides a 32-bit processing platform at 80 MHz, and its 128 KB Flash capacity can accommodate protocol stacks alongside device firmware. The 3.3 V supply can simplify integration with compatible transceivers and digital peripherals. Confirm the required UART, SPI, CAN, USB, or other interface configuration and the associated memory demand in the manufacturer documentation.
Power and Equipment Management
The XMC4104Q48K128ABXUMA1 can manage auxiliary power and equipment functions in industrial systems where a supervisory MCU handles monitoring, configuration, and communication. The 80 MHz Cortex-M4 core supports responsive control software, and 128 KB of Flash provides room for state machines, logging routines, and device drivers. Its industrial temperature range is advantageous for equipment operating in varied ambient conditions. Confirm analog measurement channels, watchdog behavior, brownout limits, and external interface requirements before assigning the device to a power-management role.
Impormasyon ng Talumpati sa Engineering for XMC4104Q48K128ABXUMA1 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | PG-VQFN-48-53 |
| Processor Core | ARM Cortex-M4 |
| Architecture | 32-bit |
| Maximum Clock Frequency | 80 MHz |
| Flash Memory | 128 KB |
| Supply Voltage | 3.3 V |
| Operating Temperature Range | -40 °C to +125 °C |
| Application Class | Industrial applications |
Pangunahing mga Pagkakaiba
- Deterministic processing headroom (kumpara salower-clock Cortex-M4 microcontrollers)
- Industrial temperature capability (kumpara sacommercial-temperature Cortex-M4 devices rated to +85 °C)
- Compact integrated code storage (kumpara saCortex-M4 devices limited to 64 KB Flash)
Talaan ng Disenyo
Use the Infineon package drawing as the authority for the PG-VQFN-48-53 land pattern, exposed-pad geometry, and solder-mask design. Place input, ground, and decoupling connections to minimize loop area, and provide thermal copper beneath the exposed pad. Check the manufacturer’s assembly and solder recommendations before defining the footprint or exposed-pad connection.
The device is identified for 3.3 V operation, but the complete power architecture still depends on the required I/O states, clock configuration, and active peripherals. Review the recommended operating conditions and external-capacitor requirements in the Infineon manufacturer datasheet. Size the local supply for startup current and decouple each supply pin directly with the capacitance specified by the device documentation.
A compact VQFN can couple heat from the die into its exposed pad, making PCB thermal performance important at elevated operating temperatures. Use the manufacturer’s thermal characterization data to evaluate the intended PCB construction. Maintain uninterrupted copper where permitted, avoid thermal voids beneath the pad, and apply the recommended reflow profile to avoid assembly damage.
Do not treat a similarly packaged 80 MHz Cortex-M4 MCU as a drop-in replacement without checking the pin table and peripheral implementation. Pay particular attention to startup pins, debug and analog functions, clock pins, exposed-pad connections, and reset behavior. The 128 KB Flash figure also does not identify RAM capacity, so validate the complete memory requirement separately.
Impormasyon ng Pagsunod sa Kautusan
The XMC4000 family is identified for industrial applications, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact orderable MPN.
