XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon
MPN: XMC4500F100F1024ACXQMA1 ✓ NakahandaXMC4500F100F1024ACXQMA1 Ulas
A microcontroller is a semiconductor system that integrates a processor core, program memory, data memory, and peripherals such as timers, communications interfaces, and analog blocks. The XMC4500 belongs to the Arm Cortex-M4 microcontroller family and the Infineon XMC4000 industrial microcontroller series. Its position in the embedded hierarchy is processor core to microcontroller to embedded control platform, combining deterministic real-time control with Ethernet-connected industrial equipment.
The principal device characteristics include a 120 MHz operating frequency, 1 MB of flash storage, 32-bit processing, and a 3.3 V supply indicated by the ordering designation. The configurable peripheral architecture allows designers to tailor timer, communication, and interface resources around an industrial application. The 100-pin LQFP package provides a conventional surface-mount option with exposed-pad construction for improved thermal performance.
Technical operation centers on the Arm Cortex-M4 processor core, which uses the ARM instruction set and supports efficient interrupt-driven control. Integrated Ethernet supports network-connected industrial equipment, while the extensive peripheral set reduces the need for external interface devices. The manufacturer describes the XMC4500 as an energy-efficient industrial platform combining leading peripheral capabilities with the Cortex-M4 core.
Typical uses include industrial Ethernet controllers, programmable logic controllers, factory automation nodes, building automation interfaces, and embedded robotics. In each case, the 120 MHz processing rate supports responsive control logic, 1 MB of flash accommodates embedded firmware, and Ethernet allows status reporting or distributed control over an industrial network.
PCB design should follow the manufacturer pin-definition table and recommended decoupling guidance for the 100-pin exposed-pad LQFP. The exposed thermal pad requires a solder-flooded PCB land and adequate thermal-via distribution to transfer heat into the board structure. Firmware configuration should also follow the ordering-information matrix because XMC4500 derivatives differ in available peripherals and temperature options.
This product page consolidates the exact ordering designation, manufacturer specifications, package information, practical PCB guidance, and verified drop-in ordering-code alternatives. It also distinguishes configurable industrial features that are shared across the XMC4500 family from the specific package and ordering code of XMC4500F100F1024ACXQMA1.
Mga alternatibo na pwedeng ilagay na XMC4500F100F1024ACXQMA1 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XMC4500F100F1024ACXQMA1 (parehas na form factor at footprint) — pagkakaiba sa Package.
XMC4500F100F1024ABXQMA1
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XMC4500F100K1024ACXQSA1
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XMC4500-F100F1024-AC
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XMC4500F100F1024ACXQMA1 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 1 MB |
| Flash Organization | 1 M x 8 bits |
| Word Width | 32 bits |
| Supply Voltage na Operasyon | 3.3 V |
| Ethernet Support | Integrated Ethernet |
| Packhaging | PG-LQFP-100-11 |
| Bilang ng Pin | 100 pins |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng XMC4500F100F1024ACXQMA1 pg-lqfp-100-11
Pin configuration para sa XMC4500F100F1024ACXQMA1 (pg-lqfp-100-11 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XMC4500F100F1024ACXQMA1.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XMC4500F100F1024ACXQMA1 ay nararapat para sa 6 aplikasyons: Industrial Ethernet Controllers, Programmable Logic Controllers, Factory Automation Equipment, Building Automation Gateways, Embedded Robotics Control, Condition Monitoring Equipment.
Industrial Ethernet Controllers
The XMC4500F100F1024ACXQMA1 fits industrial Ethernet controller designs because its 120 MHz Arm Cortex-M4 core can execute protocol processing while controlling local I/O, and its integrated Ethernet provides the device-level network interface. The 1 MB flash stores firmware, protocol stacks, configuration data, and diagnostics without requiring a separate external memory device. Use the microcontroller beside a qualified Ethernet physical layer and magnetic interface, while keeping sensitive network and analog sections separated on the PCB. Compared with a low-speed communications MCU, the 120 MHz core provides more processing headroom for diagnostics, protocol management, and concurrent real-time control functions.
Inirekomenda
Programmable Logic Controllers
The XMC4500F100F1024ACXQMA1 is appropriate for compact PLC and industrial controller modules that must combine deterministic control with network communications. Its 120 MHz Cortex-M4 core executes control loops, while 1 MB flash accommodates the application program, communication services, and field-upgrade images. The 100-pin PG-LQFP-11 package provides access to the configurable XMC4500 peripheral set for digital I/O, timing, and communications. Designers should allocate pins according to the exact derivative pin table and provide short, well-grounded connections for switching outputs and sensor inputs.
Inirekomenda
Factory Automation Equipment
XMC4500F100F1024ACXQMA1 can serve as the central controller in factory automation equipment requiring EtherCAT-compatible networking, status monitoring, or distributed I/O coordination. The 120 MHz processing rate provides capacity for deterministic control tasks and communication handling, while 1 MB flash supports embedded application code and configuration storage. Integrated Ethernet reduces the need for a separate host interface, although the board still requires a suitable Ethernet transceiver, isolation strategy, and protection network. Keep high-current relays and motor stages away from the communications and controller ground paths to limit switching noise coupling.
Inirekomenda
Building Automation Gateways
The XMC4500F100F1024ACXQMA1 is well suited to building automation gateways that coordinate lighting, HVAC, access, and environmental-control interfaces over Ethernet. Its Cortex-M4 architecture supports concurrent communication and supervisory logic, while the 1 MB flash allows room for protocol handlers, web or field-bus services, and update mechanisms. The integrated Ethernet interface is useful for connecting sensors and controllers to a building network. For reliable deployment, isolate external wiring from the MCU, use robust power regulation, and validate the controller firmware against the temperature range selected for the exact ordering code.
Inirekomenda
Embedded Robotics Control
The XMC4500F100F1024ACXQMA1 can coordinate sensors, actuators, and communication tasks in embedded robotics systems that need more processing headroom than a basic 8-bit controller. At 120 MHz, the Cortex-M4 core handles motion-command logic, sensor processing, diagnostics, and network protocols, while 1 MB flash stores control software and calibration data. Its industrial peripheral focus supports deterministic embedded control. Place motor drivers and high-current switching stages on a separate controlled power area, and route communications and analog lines away from switching nodes to reduce electromagnetic interference.
Inirekomenda
Condition Monitoring Equipment
The XMC4500F100F1024ACXQMA1 is suitable for industrial condition-monitoring nodes that collect sensor information, run local filtering, and report data over Ethernet. The 120 MHz processor can support signal conditioning, threshold evaluation, fault detection, and communication overhead, while 1 MB flash accommodates firmware and logged parameter sets. Integrated Ethernet simplifies connection to condition-monitoring servers or plant networks. The analog front end should remain separate from switching power stages, use controlled grounding, and follow the Infineon pin and decoupling guidance to avoid introducing noise into measurement channels.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XMC4500F100F1024ACXQMA1 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XMC4500F100F1024ABXQMA1 | XMC4500F100K1024ACXQSA1 | XMC4500-F100F1024-AC |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 family package |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1024 kByte |
| Processor Width | 32 bits | 32 bits | 32 bits | 32 bits |
| Ethernet Support | Integrated Ethernet | Integrated Ethernet | Integrated Ethernet | Ethernet |
| Ordering-Code Qualification | ACXQMA1 industrial ordering designation | ABXQMA1; verify temperature-grade details | KACXQSA1; verify temperature-grade details | Family ordering designation; complete suffix required |
Pangunahing mga Pagkakaiba
- Exact 120 MHz industrial Cortex-M4 configuration (kumpara saXMC4500F100F1024ABXQMA1)
- Full 1 MB flash allocation (kumpara saXMC4500F100K1024ACXQSA1)
- Integrated Ethernet in the 100-pin industrial package (kumpara saXMC4500-F100F1024-AC)
Talaan ng Disenyo
Use the manufacturer PG-LQFP-100-11 package drawing for the land pattern, including pad dimensions, solder-mask openings, and exposed-pad geometry. Place input and bulk decoupling capacitors close to their associated supply pins, with short return paths to the ground plane. Avoid routing high-current switching nodes beneath the microcontroller or exposed thermal pad.
The exposed pad is part of the package thermal path. Fill the exposed-pad land with solder and place a compact array of thermal vias according to the Infineon layout guidance. Preserve uninterrupted ground-copper area beneath the package and avoid thermal-via placement conflicts with signal or power routing.
Do not treat every XMC4500 ordering code as automatically interchangeable. Compare the complete ordering table, temperature grade, available peripherals, and package revision before replacing XMC4500F100F1024ACXQMA1. A shared 120 MHz rating and LQFP footprint do not by themselves prove that firmware, qualification, or lifecycle requirements are unchanged.
Impormasyon ng Pagsunod sa Kautusan
The XMC4500 is an industrial microcontroller, so AEC-Q100 automotive qualification is not applicable. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.