Ürünler (44.000+)

MK50DX256CLL10 - Kinetis K50 Cortex-M4 MCU 100MHz | NXP
MK50DX256CLL10

MK50DX256CLL10 - Kinetis K50 Cortex-M4 MCU 100MHz | NXP

The NXP MK50DX256CLL10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K50 family, running at up to 100 MHz with 256 KB (256K x 8) of Flash memory, housed in a 100-pin LQFP (LL, 14x14 mm) surface-mount package. A microcontroller (MCU) integrates a processor core, memory, and peripherals onto a single chip, sitting at the center of the embedded-system hierarchy: integrated circuit -> microcontroller unit -> 32-bit MCU -> ARM Cortex-M4 MCU. The Kinetis K50 sub-family specifically targets analog-measurement-intensive systems, and the MK50DX256CLL10 is the 256 KB Flash, 100-pin variant of that family. Key features include the 100 MHz Cortex-M4 core with DSP instructions and a hardware single-precision floating-point unit (FPU), 256 KB Flash program memory, and the K50 analog measurement engine with integrated operational amplifiers and high-speed ADC/DAC modules. Peripheral connectivity includes full-speed USB device/controller capability, multiple serial interfaces (SPI, I2C, UART), timers, and general-purpose I/O - all clocked from a flexible clock-generation system that supports low-power run modes for battery-sensitive designs. Technically, the K50 family was originally developed by Freescale Semiconductor (now NXP), and the MK50DX256CLL10 shares silicon, documentation, and the MCUXpresso/Kinetis SDK software ecosystem with the wider K series. The 100-LQFP (14x14 mm) package with 0.5 mm pin pitch supports industrial temperature operation and standard reflow assembly. According to distributor listings, the part is currently in stock (for example 7,984 pieces at Heisener) with a unit price of approximately $13.45 as of 2026-10-18. Typical applications include medical monitoring equipment, portable instrumentation, industrial control and sensor acquisition systems - domains where the analog measurement engine (op-amps, trans-impedance amplifiers, ADCs, DACs) reduces external component count and board area. Design consideration: the 100 MHz core draws peak current on the 3.3 V rail, so provide solid decoupling on every VDD/VDDA pin pair and budget the analog supply separately to exploit the K50 on-chip analog performance. Flash programming is supported through JTAG/SWD and the ROM bootloader. This page synthesizes distributor pricing, same-package drop-in alternatives within the Kinetis K50/K51/K60 ecosystem, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim
MK50DX256CMC7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP
MK50DX256CMC7

MK50DX256CMC7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP

The NXP Semiconductors MK50DX256CMC7 is a 32-bit ARM Cortex-M4 microcontroller in the Kinetis K50 measurement family, featuring a 72 MHz core, 256 KB of program flash, and full-speed USB, housed in a 121-pin MAP-BGA (8x8 mm) package. It integrates high-precision analog peripherals aimed at measurement applications such as metering, industrial sensing, and human-machine interface designs, where deterministic real-time performance is required. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, volatile and non-volatile memory, programmable peripherals, and bus interfaces on one die. ARM Cortex-M4 cores are 32-bit processor cores designed for deterministic real-time embedded workloads, with single-cycle multiply-accumulate instructions and an optional single-precision floating-point unit. The MK50DX256CMC7 belongs to the Kinetis K50 sub-family, which extends the broader Kinetis K-series (K0x/K1x/K2x/K5x/K6x) measurement portfolio and pins the SoC between entry-level K1x and high-performance K6x devices. Within that hierarchy it is a mid-range measurement MCU. Key features include 256 KB of embedded flash, an integrated 16-bit ADC with up to four differential channels, a 12-bit DAC, four 16-bit timers plus an FlexTimer with PWM capability, an integrated full-speed USB 2.0 device/host/On-The-Go controller, multiple serial interfaces (UART, SPI, I2C, I2S), and a low-power Sleep/Deep-Power-Down mode. The 72 MHz Cortex-M4 core delivers 1.25 DMIPS/MHz with a hardware MAC and single-precision FPU, giving roughly 90 DMIPS of integer performance. Architecturally, the device combines the ARM Cortex-M4 core with a multi-layer AHB-Lite bus matrix, tightly-coupled flash and RAM controllers, and a Low-Leakage Wake-Up Unit (LLWU) that supports multiple wake-up sources while the chip is in Deep-Power-Down. The 121-MAPBGA package exposes the full set of K50 peripherals on the same footprint as other K50-family MCUs, enabling PCB reuse across SKUs of different flash/RAM densities. Typical applications include single-phase and polyphase electricity meters, industrial motor-control inverters, machine-to-machine gateways with USB, portable medical instrumentation, and HMI panels with USB connectivity. The Cortex-M4+DSP extensions also make the part useful for digital signal conditioning and sensor-fusion front ends. When laying out this part, allocate a continuous copper GND pour directly beneath the package and route the USB DP/DM pair as a 90-ohm differential line. Decouple VDD/VREFH locally with 100 nF X7R ceramics plus one bulk 4.7 uF per supply rail placed within 5 mm of the BGA balls. This page synthesizes distributor stock, parametric drop-in alternates from the Kinetis K50 family, and application-grade design guidance that is not collected in the bare manufacturer datasheet.

RFQ İletişim
MK50DX256ZCLL10 - 100MHz Cortex-M4 256KB MCU | NXP
MK50DX256ZCLL10

MK50DX256ZCLL10 - 100MHz Cortex-M4 256KB MCU | NXP

The NXP Semiconductors MK50DX256ZCLL10 is an ARM Cortex-M4 32-bit Kinetis K50 microcontroller rated at 100 MHz, with 256 KB of Flash memory and a 100-LQFP 14 x 14 mm package. It is designed for embedded systems that require deterministic control, substantial on-chip program storage, and a broad set of integrated peripherals. A microcontroller such as the MK50DX256ZCLL10 is a complete programmable control element: it combines a CPU core, memory, interrupt control, timers, communication interfaces, and analog or mixed-signal peripherals on one integrated circuit. In the system hierarchy, this ARM Cortex-M4 MCU belongs to the embedded processor and microcontroller class rather than the discrete semiconductor or passive-component categories. Its role is to execute firmware and coordinate sensors, actuators, communications, and human-machine interfaces. The verified product information identifies a 32-bit ARM Cortex-M4 core, 100 MHz operating frequency, and 256 KB Flash memory. A 100-LQFP package provides 100 external leads and is suitable for board-level assembly where a relatively high pin count is acceptable. The listed Kinetis K50 positioning also makes the device relevant to industrial, measurement, communications, and embedded control designs that need a general-purpose MCU with substantial Flash storage. The 100 MHz Cortex-M4 architecture is suited to interrupt-driven control loops, protocol handling, data acquisition, and supervisory tasks. The 256 KB Flash capacity provides room for an embedded application image, bootloader, configuration data, and library code. Compared with a very small low-power MCU, the MK50DX256ZCLL10 offers more compute and storage headroom, while its package and power-management requirements should be checked against the target board. Typical applications include industrial monitoring, data-acquisition systems, building automation, embedded instrumentation, communication equipment, and motor or process-control platforms. For these uses, the MCU can execute control software while handling sensor inputs and communicating with external controllers. The exact peripheral set, supply limits, pin functions, memory map, and electrical limits must be confirmed in the manufacturer datasheet before final design release. A key design consideration is PCB layout. The 100-LQFP package has closely spaced leads and requires careful routing of power, ground, decoupling, and high-speed signals. Confirm the recommended land pattern, exposed thermal requirements, and all alternate-function assignments from the NXP documentation rather than inferring them from the package name. This page consolidates verified distributor and manufacturer information with selection guidance, application context, and design notes that are not normally included in a basic distributor listing. It is intended to help engineers identify the correct MCU and plan a reliable hardware implementation.

RFQ İletişim
MK50DX256ZCLQ10 - 100MHz Cortex-M4 MCU | NXP | Industrial Control
MK50DX256ZCLQ10

MK50DX256ZCLQ10 - 100MHz Cortex-M4 MCU | NXP | Industrial Control

The NXP Semiconductors MK50DX256ZCLQ10 is a 32-bit ARM Cortex-M4 Kinetis K50 microcontroller operating at 100 MHz, with 256 KB of Flash memory, 64 KB of SRAM, integrated USB device support, and a 144-LQFP 20 x 20 mm package. The verified product information also identifies a broader Kinetis K50 family configuration with 512 KB Flash and 64 KB SRAM; the target MPN is explicitly specified as the 256 KB Flash variant. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The ARM Cortex-M4 core provides real-time control processing, while the K50 family combines digital control with mixed-signal measurement resources. This places the device in the hierarchy of MCU, embedded processor, semiconductor, and connected industrial-control component. Key verified attributes include a 100 MHz operating frequency, ARM Cortex-M4 architecture, 256 KB Flash, 64 KB SRAM, full-speed USB support, and a 144-LQFP package. The product listing describes support for 1.8 V, 2.5 V, and 3.3 V operating variants. Its integrated security and analog measurement capabilities make it relevant to industrial instruments, medical equipment, data acquisition systems, and USB-connected embedded controls. The MK50DX256ZCLQ10 belongs to the Kinetis K50 performance MCU family, which is designed for applications requiring more computation and measurement capability than a basic control MCU. Its USB device interface can simplify connection to a host computer, service interface, or peripheral system when the firmware and board design support the required USB class and protocol. Typical applications include industrial data loggers, portable medical instruments, USB-connected measurement equipment, industrial control modules, and embedded test systems. The 144-LQFP package provides a relatively large pin count for external connectivity and mixed-signal integration, but it requires a PCB footprint with adequate routing and thermal-management capability. For a new design, engineers should confirm the exact NXP datasheet pin assignments, electrical limits, memory map, USB implementation, and package dimensions before layout. Because the verified search results identify the part as NRND, production sourcing should include confirmation of current availability and lifecycle planning. This page consolidates verified distributor and manufacturer information, focused application guidance, lifecycle context, and a conservative replacement assessment. Because no manufacturer PDF was exposed in the supplied results, unverified technical details remain marked for data completion rather than inferred.

RFQ İletişim
MK51DN256ZCMD10 - 100MHz Cortex-M4 MCU | NXP
MK51DN256ZCMD10

MK51DN256ZCMD10 - 100MHz Cortex-M4 MCU | NXP

NXP Semiconductors MK51DN256ZCMD10 is a 32-bit Kinetis K51 measurement microcontroller built on the Arm Cortex-M4 core, operating at up to 100 MHz. It integrates 256 KB of Flash memory, 64 KB of SRAM, USB, a segment LCD interface, and advanced serial communications in a 144-MAPBGA package measuring 13 x 13 mm. The device is identified as NRND by NXP, so new designs should verify roadmap and sourcing implications before committing. A microcontroller is a programmable control component that combines a processor core, memory, and peripherals on one integrated circuit. In the hierarchy, this device is an MCU, a semiconductor, and a member of the Kinetis K51 measurement family. Its Cortex-M4 architecture supports real-time control and signal-processing workloads, while USB, LCD, ADC, DAC, and communications resources reduce the number of external devices required in measurement instruments. Verified listings identify 100 MHz operation, 256 KB Flash, 64 KB SRAM, USB, and a segment LCD interface. Additional source material describes dual 16-bit ADCs and dual 12-bit DACs, but those details should be checked against the official device documentation before design release. The 144-MAPBGA package is compact but requires careful PCB escape routing and assembly capability. Typical uses include industrial measurement, data acquisition, portable instrumentation, USB-connected test equipment, and control panels with segment displays. The 100 MHz core and integrated analog resources are useful when a design needs deterministic sampling, communication, and local control in one device. Software support and peripheral configuration remain critical engineering considerations. For layout, provide short, well-decoupled power connections, controlled-return clocks, and accessible test points. Validate analog and digital return paths to preserve measurement accuracy. This page consolidates verified source information, lifecycle status, commercial data, and design cautions; it does not infer missing electrical details or unverified pin assignments.

RFQ İletişim
MK51DN512CLQ10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK51DN512CLQ10

MK51DN512CLQ10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK51DN512CLQ10 is a Kinetis K51 32-bit ARM Cortex-M4 microcontroller running at 100 MHz with 512 KB of on-chip Flash and 128 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It is a K5x Measurement-series MCU integrating segment-LCD, USB, and advanced serial communication peripherals aimed at metering, instrumentation, and human-machine interface (HMI) applications. What is a Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit RISC processor core designed for embedded applications requiring deterministic real-time response, with optional single-precision floating-point (FPU) hardware and a DSP instruction set. MCUs sit at the bottom of the embedded computing hierarchy: transistor -> logic gates -> CPU core -> microcontroller -> embedded system -> IoT/edge device. The Kinetis K51 family extends the Cortex-M4 baseline with NXP low-leakage peripherals and a segment-LCD controller for battery-powered instruments. Key features of the MK51DN512CLQ10 include 100 MHz core with 16-bit single-cycle MAC, 512 KB Flash / 128 KB SRAM, segment-LCD controller (up to 8x40 segments typical for the family), USB 2.0 full-speed On-The-Go (OTG) with integrated PHY, and a 16-bit SAR ADC with up to 27 analog channels. Communication peripherals include UART, SPI, I2C, I2S, IrDA, SDHC, and an external memory interface (EBI/EMI). The 144-LQFP package exposes up to 81 GPIO for system expansion. The device uses a 1.71 V to 3.6 V single supply, has an internal voltage regulator, low-power run/wait/stop modes, and four 32-bit timers plus a 6-channel motor-control timer. The K5x Measurement series is engineered for low-power metering designs where the LCD glass is always visible while the core remains in sleep, waking on periodic ADC sampling for battery-consumption logging. Typical applications include electricity/water/gas metering, industrial HMI panels, portable medical measurement devices, building automation gateways, and tethered USB peripherals with segment-LCD user feedback. The 512 KB Flash supports full-feature smart-metering stacks including DLMS/COSEM or IEC 62056 application code. When designing, ensure the 144-LQFP land pattern uses thermal vias under the exposed pad to sink MCU dissipation, and place the 32.768 kHz crystal within 5 mm of the XTAL pins to minimize stray load capacitance. This page synthesizes real-time distributor pricing, K5x family same-brand drop-in alternatives, and PCB-layout notes for the 144-LQFP variant that the manufacturer datasheet presents across multiple documents.

RFQ İletişim
MK51DN512ZCLL10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK51DN512ZCLL10

MK51DN512ZCLL10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK51DN512ZCLL10 is a Kinetis K51 (K50 sub-family) 32-bit microcontroller built on the Arm Cortex-M4 core, running at 100 MHz with 512 KB of flash memory and 128 KB of SRAM, housed in a 100-pin LQFP (14 x 14 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy (MCU -> embedded processor -> application processor -> SoC). Measurement MCUs such as the Kinetis K51 family add analog and display integration - here a Segment LCD controller, USB OTG, and multiple serial interfaces - so a single chip can drive a complete instrument front panel. Key features of the MK51DN512ZCLL10 include the 100 MHz Cortex-M4 core with DSP instructions, 512 KB (512K x 8) on-chip flash supporting firmware-in-field updates, 128 KB of SRAM, a USB 2.0 full-speed controller with OTG capability, and a Segment LCD controller suited to battery-powered metering products. Serial connectivity spans I2C, IrDA, SPI, SD, and UART/USART. Architecturally, the device operates from a single supply of 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V nominal), with 57 general-purpose I/O lines. The Cortex-M4 pipeline and Harvard bus structure provide deterministic single-cycle multiply and hardware divide, beneficial for digital filtering and measurement math in instrumentation firmware. Typical applications include medical measurement devices, utility metering with LCD displays, industrial portable instrumentation, and consumer health monitors - anywhere a 32-bit MCU must combine USB communications, LCD readout, and mixed-signal measurement. Design consideration: because this part is listed NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate the pin-compatible Kinetis K5x successors, while existing BOMs can continue sourcing through authorized channels such as Rochester Electronics. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-10-18.

RFQ İletişim
MK51DN512ZCLQ10 - 100MHz Cortex-M4 MCU | NXP
MK51DN512ZCLQ10

MK51DN512ZCLQ10 - 100MHz Cortex-M4 MCU | NXP

The NXP Semiconductors MK51DN512ZCLQ10 is a 32-bit Kinetis K51 measurement microcontroller built around an Arm Cortex-M4 core operating up to 100 MHz. It provides 512 KB of programmable flash, 128 KB of SRAM, USB connectivity, and segment-LCD support in a 144-LQFP package measuring 20 mm by 20 mm. The device is positioned for data-acquisition, medical, industrial, communications, and embedded measurement systems. A microcontroller is a programmable embedded-computing component that combines a processor core, memory, peripherals, and I/O in one device. The MK51DN512ZCLQ10 belongs to the hierarchy microcontroller -> embedded processor -> semiconductor. Its Cortex-M4 architecture supports real-time control and signal-processing workloads, while its measurement-oriented peripherals reduce the need for external interface components. The verified product information identifies a 100 MHz maximum operating frequency, 512 KB flash, 128 KB SRAM, USB, segment LCD, and advanced serial communications. DigiKey also identifies the package as 144-LQFP with 144 terminals. The NXP product page states that the scalable MCU combines security features, USB device, host, and OTG support, and low-power operation for medical and industrial applications. The K51 family is suited to systems that combine local control with human-machine displays or measurement peripherals. Its flash capacity permits substantial firmware storage, while its SRAM supports control loops, buffers, and communication stacks. The segment-LCD interface is particularly relevant for instruments, meters, panels, and portable equipment requiring a local numeric or alphanumeric display. Typical applications include industrial data loggers, medical monitoring equipment, USB-connected instruments, panel meters, environmental measurement systems, and communication gateways. Designers must confirm voltage, temperature, pin multiplexing, memory mapping, and USB requirements against the manufacturer datasheet before releasing a production design. PCB implementation should preserve the 144-LQFP land pattern, provide adequate decoupling and grounding, and route high-speed or sensitive signals with controlled impedance where applicable. Because the verified excerpts do not include a complete pin table, a public pinout is not reproduced here. This page consolidates verified manufacturer and distributor findings, package information, application guidance, and explicit data gaps rather than inventing unconfirmed electrical or lifecycle details.

RFQ İletişim
MK51DN512ZCMC10 - 100MHz Cortex-M4 512KB MCU | NXP
MK51DN512ZCMC10

MK51DN512ZCMC10 - 100MHz Cortex-M4 512KB MCU | NXP

The NXP Semiconductors MK51DN512ZCMC10 is a 32-bit Kinetis K51 measurement microcontroller with a 100 MHz Arm Cortex-M4 core, 512 KB of Flash memory, 128 KB of SRAM, USB connectivity, and segment LCD support in a 121-map BGA package. It is designed for embedded measurement, monitoring, and industrial-control systems that require substantial local memory and multiple communication interfaces. A microcontroller is a programmable semiconductor system that integrates a CPU core, memory, peripherals, and I/O into one device. The Kinetis K51 belongs to the MCU hierarchy and combines real-time control with measurement-oriented peripherals. This makes it suitable for applications that must acquire sensor data, process it locally, communicate with a host, and display information without relying on external memory. The MK51DN512ZCMC10 provides 512 KB of Flash for firmware and 128 KB of SRAM for working data. Its 100 MHz maximum clock supports responsive control and signal-processing tasks. The listed feature set includes USB, segment LCD, advanced serial communication, and 57 I/O ports according to the retrieved distributor specifications. The device is available in a 121-map BGA package identified by the retrieved data as 8 mm by 8 mm, with an industrial temperature grade listed by one distributor source. Typical applications include industrial measurement instruments, data-acquisition systems, medical and laboratory equipment, USB-connected embedded controllers, and LCD-based operator interfaces. USB connectivity can simplify host integration, while local Flash supports application code, calibration data, and firmware updates. The segment LCD capability is particularly useful where a simple local display is preferable to a full graphical display. Designers should verify the exact pinout, ball assignments, power requirements, peripheral availability, and programming configuration against the official NXP datasheet before layout or firmware deployment. The verified data identifies the part as an NXP Kinetis K51 100 MHz Cortex-M4 MCU, but it does not provide enough verified detail to reproduce a complete electrical or pin-level specification without manufacturer documentation. This page combines the verified NXP and distributor descriptions, pricing references, package information, and practical selection guidance. It is intended to help engineers identify whether the MK51DN512ZCMC10 fits an embedded measurement design and to distinguish it from alternatives that use a different package or memory organization.

RFQ İletişim
MK51DX128CLK7 - Kinetis K51 ARM Cortex-M4 MCU 128KB | NXP
MK51DX128CLK7

MK51DX128CLK7 - Kinetis K51 ARM Cortex-M4 MCU 128KB | NXP

The NXP MK51DX128CLK7 is an ARM Cortex-M4 Kinetis K50-series microcontroller running at 72 MHz with 128 KB of flash and 32 KB of SRAM, packaged in an 80-pin LQFP (12x12 mm). It integrates a flexible peripheral set including USB OTG, CAN, I2C, SPI, UART/USART, IrDA, DMA, PWM, LVD, POR, and a watchdog timer, plus 39 general-purpose I/O pins. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a rich peripheral set on one die. The Kinetis K50 family sits within NXP's K-series ARM Cortex-M4 microcontrollers, which belong to the broader 32-bit embedded MCU category. Kinetis K50 parts target industrial and automotive motor-control and human-machine interface applications where USB connectivity and analog integration matter alongside deterministic real-time performance. Key features of the MK51DX128CLK7 include 128 KB of on-chip flash, 32 KB SRAM, dual-bank flash architecture for field upgrades, a 12-bit ADC, and integrated USB 2.0 full-speed On-The-Go. The Cortex-M4 core includes a single-precision hardware floating-point unit and a Nested Vectored Interrupt Controller (NVIC) supporting deterministic interrupt latency. An external memory bus is exposed for expanding memory or interfacing to parallel peripherals. The 72 MHz ARM Cortex-M4 core delivers 1.25 DMIPS/MHz, providing efficient signal-processing headroom for motor-control algorithms, sensor fusion, or basic audio processing. The part operates from 1.71 V to 3.6 V, supporting battery-backed designs. The 80-LQFP (12x12) package is a low-profile surface-mount package from the LQFP family with generous thermal dissipation for industrial environments. Typical applications include industrial motor control, factory automation, building control panels, security alarm panels, point-of-sale terminals, USB peripherals, and portable medical devices. The K51 derivative within K50 specifically targets USB-connected and user-interface-focused designs. When designing with the MK51DX128CLK7, ensure the supply rail has sufficient decoupling (typically 100 nF plus 4.7 uF bulk) placed within 5 mm of the package. The 80-LQFP (12x12) footprint simplifies hand-rework and optical inspection compared to fine-pitch QFN parts. This page synthesizes authorized distributor pricing, drop-in alternatives within the Kinetis K50 family, and practical design notes not found in the manufacturer datasheet. Refer to the NXP Kinetis K50 reference manual for full peripheral register definitions.

RFQ İletişim
MK51DX128CMC7 - 72MHz Cortex-M4 MCU | NXP | Measurements
MK51DX128CMC7

MK51DX128CMC7 - 72MHz Cortex-M4 MCU | NXP | Measurements

The NXP Semiconductors MK51DX128CMC7 is a 32-bit Arm Cortex-M4 microcontroller operating at 72 MHz, with 128 KB of flash memory, 32 KB of SRAM, 61 I/O, USB connectivity, and high-precision analog integration in a 121-MAPBGA package measuring 8 x 8 mm. The Kinetis K51 device combines a segment LCD interface, USB, serial interfaces, DMA, and measurement-oriented analog peripherals for embedded instrumentation. What is a Kinetis K51 microcontroller? It is a 32-bit embedded microcontroller in NXP's Kinetis portfolio, built around the Arm Cortex-M4 processor core. The MK51DX128CMC7 belongs to the Kinetis K51 measurement MCU family, which targets compact industrial, medical, consumer, and test equipment designs requiring local analog measurement, human-machine interfaces, and USB connectivity. It sits within the hierarchy of microcontroller, embedded processor, semiconductor, and electronic component. Key verified features include a 72 MHz processor clock, 128 KB (128K x 8) program flash, 32 KB SRAM, 61 I/O, and an 8 x 8 mm 121-MAPBGA package. Listed connectivity includes I2C, IrDA, SPI, UART/USART, USB, and USB OTG. Listed peripherals include DMA, I2S, low-voltage detection, power-on reset, PWM, and a watchdog timer. These resources support simultaneous sensor acquisition, communications, display control, and control-loop processing. The device architecture centers on a 32-bit Arm Cortex-M4 core with DSP-capable signal processing. Its high-precision analog integration makes it appropriate for measurement systems, while segment LCD support enables compact local user interfaces without requiring a separate display controller. USB and multiple serial interfaces provide paths for host connectivity, sensor networking, data logging, and configuration. Firmware should use the manufacturer's device configuration, pin multiplexing, clock, analog, and low-power guidance for the exact package variant. Typical applications include digital multimeters, temperature-measurement instruments, medical monitoring equipment, industrial panel meters, USB-connected test tools, and compact data-acquisition systems. In these systems, the MCU can collect sensor inputs, run calibration and filtering, drive a segment display, communicate with an upstream host, and supervise power or peripheral activity. The primary design consideration is BGA layout and firmware portability. A 121-MAPBGA package requires fine-pitch assembly capability and careful escape routing; the selected PCB stack-up, land pattern, solder-mask design, and assembly process must follow NXP guidance. Validate signal integrity for USB and serial interfaces and budget CPU and DMA bandwidth for simultaneous measurement and display updates. This product page combines verified distributor specifications, manufacturer status, package information, and practical design guidance. It distinguishes confirmed values from parameters not supplied in the retrieved sources and avoids inventing pin assignments, electrical limits, or drop-in replacements that were not explicitly verified.

RFQ İletişim
MK51DX256CLL10 - K51 100MHz Cortex-M4 MCU, 256KB Flash, 100-LQFP | NXP
MK51DX256CLL10

MK51DX256CLL10 - K51 100MHz Cortex-M4 MCU, 256KB Flash, 100-LQFP | NXP

The NXP MK51DX256CLL10 is a Kinetis K51 sub-family microcontroller built on the ARM Cortex-M4 core, integrating 256KB of program flash and 64KB SRAM in a 100-pin LQFP (14x14 mm) package. The Cortex-M4 core runs at up to 100MHz with single-precision hardware floating-point and DSP extensions, supporting measurement and metering workloads that require deterministic signal processing. The K51 silicon specifically integrates a Segment LCD controller, USB 2.0 full-speed device/host/OTG, and an analog front-end including 16-bit ADC and 12-bit DAC for sensor-driven designs. A microcontroller (MCU) is a System-on-Chip that combines a CPU core, program memory (Flash), volatile memory (SRAM), and a configurable set of peripherals (ADCs, timers, communication interfaces, LCD drivers). It belongs to the broader hierarchy of embedded processors -> microcontrollers -> ARM Cortex-M microcontrollers -> Kinetis K-series measurement MCUs. MCUs form the lowest layer of the embedded control stack, executing bare-metal or RTOS code that interacts directly with hardware signals while requiring no operating system overhead. Key features of the MK51DX256CLL10 include 256KB of dual-bank FlexMemory (Flash + EEPROM emulation), a USB 2.0 OTG controller, a Segment LCD driver supporting up to 8x40 segments, an analog suite with 16-bit Sigma-Delta ADC and 12-bit DAC, and a comprehensive serial block (UART, SPI, I2C, I2S, CAN). The device operates across 1.71V to 3.6V with multiple low-power modes including VLLS0 (deepest sleep, RAM retained). The architecture pairs an ARM Cortex-M4 core with a 16-channel DMA engine and a crossbar switch for simultaneous peripheral/master access without blocking. Freescale/NXP's Kinetis family adds an Enhanced Harvard bus, an MPU for memory protection, and an external bus interface for off-chip memory expansion when the on-chip 256KB Flash is insufficient. Cryptographic acceleration is also integrated for secure bootloader and TLS-style workloads on connected endpoints. Typical applications include single-phase and polyphase electricity meters (segment LCD readout), portable medical instrumentation, industrial sensors with USB diagnostic output, human-machine interfaces requiring LCD plus CAN connectivity, and motor control signal conditioning. The device's 100MHz Cortex-M4 with DSP instructions is well suited to FIR/FFT processing on ADC streams. When designing with this part, note that the 100-LQFP (14x14) footprint is shared with the K50/K51/K52 family, allowing migration without board rework when memory or peripheral needs change. Ensure the Segment LCD bias network is correctly configured if unused to avoid quiescent current drain. This page synthesizes distributor pricing, same-family Kinetis drop-in alternatives, and practical design notes not aggregated on the manufacturer product page.

RFQ İletişim
MK51DX256CLL7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP
MK51DX256CLL7

MK51DX256CLL7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP

The NXP Semiconductors MK51DX256CLL7 is a Kinetis K51 series 32-bit microcontroller built on the Arm Cortex-M4 core, running at 72 MHz with 256 KB of program Flash and 64 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package with 57 general-purpose I/O lines. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest level of the embedded system hierarchy: MCU -> embedded processor -> microprocessor-based system. The Kinetis K51 family targets measurement applications by adding a Segment LCD controller, USB, and high-precision analog integration on top of the mid-performance Kinetis portfolio. Key features of the MK51DX256CLL7 include a floating-point-capable Arm Cortex-M4 pipeline at 72 MHz, USB OTG connectivity, a segment LCD driver for glass displays, and flexible low-power peripheral operation. Peripherals include DMA, I2S, low-voltage detection, power-on reset, PWM, and a watchdog timer, giving designers a complete signal-chain controller in one device. Connectivity is provided by I2C, IrDA, SPI, UART/USART, USB, and USB OTG interfaces. The FlexMemory architecture provides scalable Flash and data-storage options, and the part is industrial temperature graded for harsh environments. The 100-LQFP gull-wing, square package suits both hand assembly and standard surface-mount reflow lines. Typical applications include utility metering with segment LCD displays, portable medical measurement instruments, industrial human-machine interfaces, and USB-connected data-acquisition nodes. The segment LCD controller eliminates a dedicated LCD driver IC, while the Cortex-M4 DSP instructions handle filtering and FFT workloads locally. When designing with this MCU, budget the 256 KB Flash against code growth and consider pin-compatible Kinetis family members with larger Flash for a migration path; all Kinetis K-series devices share NXP's MCUXpresso enablement and software SDK. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
MK51DX256ZCLL10 - Kinetis K51 100MHz Cortex-M4 MCU, 256KB Flash | NXP Semiconductors
MK51DX256ZCLL10

MK51DX256ZCLL10 - Kinetis K51 100MHz Cortex-M4 MCU, 256KB Flash | NXP Semiconductors

The NXP Semiconductors MK51DX256ZCLL10 is a 32-bit ARM Cortex-M4 microcontroller in the Kinetis K51 measurement family, operating at up to 100 MHz with 256 KB of program flash and 64 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. Per the NXP Kinetis K51 datasheet, this MCU integrates a Cortex-M4 core with DSP instructions and a single-precision FPU, segment LCD driver, USB 2.0 full-speed on-the-go, and an analog front-end featuring two 16-bit SAR ADCs with integrated programmable gain amplifiers (up to x64), a 12-bit DAC, two operational amplifiers, and a transimpedance amplifier. A measurement MCU (also called a mixed-signal microcontroller) is a semiconductor that combines a processor core with high-precision analog peripherals specifically engineered for sensor signal acquisition, signal conditioning, and human-machine interface drive. Within the embedded hierarchy, MK51DX256ZCLL10 sits in the MCU -> 32-bit microcontroller -> ARM Cortex-M class -> Kinetis K-series taxonomy, optimized for measurement applications rather than pure control. Engineers typically select this category when they need one-chip integration of metrology-grade analog, a display interface, and standard serial connectivity. Key features of the MK51DX256ZCLL10 include integrated segment LCD controller for glass display drive, USB 2.0 full-speed OTG, multiple low-power modes with run, wait, stop, and VLPR/VLPS, and a 16-bit ADC with PGA supporting both thermistor-style and load-cell sensor inputs. The device also offers up to 70 general-purpose I/O, multiple timers including a programmable delay block and motor-control PWM, and serial interfaces including UART, SPI, and I2C. The 100-pin LQFP package provides ample pin count for mixed-signal designs that need both analog and digital I/O without bus multiplexing. Architecturally, the K51 leverages the Cortex-M4 Harvard bus configuration with single-cycle multiplier, hardware divide, and tightly coupled memory options. The 256 KB flash is organized in a dual-bank layout supporting field firmware upgrades, while the 64 KB SRAM supports simultaneous program execution and data buffering. The combination of segment LCD and high-precision ADC on the same die is what distinguishes the K51 from other Cortex-M4 Kinetis sub-families (K10, K20, K40) that lack this analog bundle. Typical applications include single-phase and polyphase smart electricity meters, multi-function industrial meters (water, gas, heat), medical measurement instruments like blood-pressure monitors and glucose meters, HVAC controllers with display, industrial scales and load-cell amplifiers, USB data loggers, and human-machine interfaces with LCD readout. The integrated transimpedance amplifier and op-amps reduce external analog bill of materials in optical and electrochemical sensor designs. When designing with this MCU, prioritize decoupling capacitor placement near both VDD and VDDA pins, and route analog inputs as short and guarded as possible to preserve 16-bit ADC performance. The segment LCD voltage levels are configured by the chip's charge pump and LCD pin assignments are multiplexed - verify the desired glass pinout against the device's LCD_PIN_MAP register before committing to a PCB layout.

RFQ İletişim
MK52DN512CLQ10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP K52
MK52DN512CLQ10

MK52DN512CLQ10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP K52

The NXP Semiconductors MK52DN512CLQ10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K50/K52 sub-family, delivering 100 MHz core performance with 512 KB of Flash and 128 KB of SRAM in a 144-pin LQFP (20x20 mm) package. The device integrates a high-precision analog measurement engine consisting of operational and trans-impedance amplifiers, a 16-bit ADC, a 12-bit DAC, USB 2.0 full-speed, and an Ethernet MAC, all running from a 1.71–3.6 V supply. A K52-sub-family MCU is a low-power, mixed-signal ARM Cortex-M4 microcontroller that combines Cortex-M4 DSP/FPU compute with on-chip analog front-end peripherals, positioning it between a general-purpose MCU and a precision analog front-end IC. In the broader taxonomy it belongs to microcontrollers -> 32-bit microcontrollers -> ARM Cortex-M microcontrollers -> mixed-signal MCUs. The Kinetis K50/K52 series specifically targets precision signal-chain applications where the analog front end is as critical as the digital core. Key features include 100 MHz Cortex-M4 core with single-precision FPU and DSP instructions, 512 KB program Flash, 128 KB SRAM, integrated 16-bit ADC with up to 4 differential or 8 single-ended inputs, two 12-bit DACs, multiple UART/SPI/I2C ports, USB 2.0 full-speed On-The-Go, 10/100 Ethernet MAC with MII/RMII, low-power run, wait, stop, and VLLS modes, and a wide operating voltage range from 1.71 V to 3.6 V. The device is qualified over the -40 C to +105 C industrial temperature range. The architecture pairs an ARM Cortex-M4 core with a Cortex-M4 Memory Protection Unit, a four-channel DMA controller, an embedded voltage regulator with on-chip decoupling, and the analog measurement engine. The combination of DSP-class compute, hardware FPU, and integrated high-resolution ADC/DAC enables single-chip precision measurement designs that previously required a separate DSP and a dedicated analog front-end. Typical applications include industrial process control and PLC analog modules, medical patient-monitoring instruments, smart energy and power-metering endpoints, building automation sensor nodes, and USB- or Ethernet-connected test and measurement equipment. The integrated Ethernet and high-resolution ADC make the part particularly attractive for distributed measurement nodes that must aggregate analog sensor data and publish it on an industrial network. When designing with this part, ensure the analog supply decoupling is placed close to the VDDA pin and that the ADC reference pins are driven from a low-noise source. The 144-LQFP footprint offers generous ground paddle access; tying the exposed pad to a clean analog ground improves ADC performance in precision measurement designs. This page synthesizes verified distributor stock and pricing, drop-in Kinetis-family alternatives, and practical PCB/decoupling notes drawn from the K50/K52 datasheet, providing information not available on the bare manufacturer product page.

RFQ İletişim
MK52DN512CMD10 - 100MHz Cortex-M4 Kinetis K50 MCU | NXP
MK52DN512CMD10

MK52DN512CMD10 - 100MHz Cortex-M4 Kinetis K50 MCU | NXP

The NXP MK52DN512CMD10 is a Kinetis K50 series 32-bit microcontroller based on the Arm Cortex-M4 core running at 100 MHz, with 512 KB of on-chip flash memory and 128 KB of SRAM, housed in a 144-pin MAPBGA package measuring 13x13 mm. A microcontroller unit (MCU) is a complete computing system integrated on a single chip, combining a processor core, memory, and peripherals. The Kinetis K50 family sits within NXP's broader Kinetis MCU hierarchy, which is part of the wider Arm Cortex-M embedded processor ecosystem used in industrial and medical electronics. Within this taxonomy, the K50 sub-family is distinguished by its integrated analog measurement engine, positioning it as a measurement-oriented MCU rather than a general-purpose controller. Key differentiating features include the K50 analog measurement engine, which integrates operational amplifiers and trans-impedance amplifiers alongside high-resolution ADC and DAC modules. According to NXP product information, this integration reduces external component count, cuts system cost, and increases design flexibility for precision measurement designs. The Cortex-M4 core includes DSP instructions that, per NXP, increase performance by reducing core interruption overhead. Technically, the device operates from 1.8V, 2.5V, or 3.3V supply rails and provides USB and Ethernet connectivity. Industrial temperature grade classification is indicated by distributor Partstack data. The MAPBGA ball-grid array package offers a compact 13x13 mm footprint with 144 connection balls for high pin-count peripheral expansion. Typical applications are medical instrumentation and industrial measurement systems, where the integrated op amps and high-resolution ADC/DAC modules directly serve sensor signal chains. USB and Ethernet interfaces support connected devices and networked diagnostics. Design consideration: verify flash memory configuration at PCB bring-up, as NXP Kinetis devices in the 512 KB class are offered in multiple flex-memory variants; the MK52DN512CMD10 is listed by DigiKey with 512KB (512K x 8) flash. This page synthesizes distributor availability data, family comparisons, and drop-in alternative guidance not consolidated in the manufacturer datasheet.

RFQ İletişim
MK52DN512ZCMD10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP
MK52DN512ZCMD10

MK52DN512ZCMD10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP

The NXP Semiconductors MK52DN512ZCMD10 is a Kinetis K52 (K50 100 MHz family) 32-bit microcontroller with an Arm Cortex-M4 core running at 100 MHz, 512 KB flash memory, 128 KB SRAM, and an integrated analog measurement engine, housed in a 144-ball MAPBGA (13 x 13 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded systems. Within the hierarchy of embedded processors, an MCU is more integrated than an MPU (microprocessor unit) and less powerful than an applications processor; the Kinetis K5x family belongs to NXP's Kinetis portfolio of Arm Cortex-M based MCUs used across industrial, medical, and consumer electronics. Key features of the MK52DN512ZCMD10 include the 100 MHz Cortex-M4 core with DSP instructions and a hardware floating-point unit, 512 KB of flash for program storage, and 128 KB of SRAM for data and stack. As a K52 sub-family member of the analog-measurement-focused K50 family, it integrates operational amplifiers and trans-impedance amplifiers alongside high-resolution ADC and DAC modules, reducing external component count in precision measurement signal chains. The device also provides USB and Ethernet connectivity per its NXP product page, making it suitable for networked instrumentation nodes. Peripherals are clocked from a flexible clock architecture supporting multiple clock sources and a phase-locked loop for core and bus clock generation. Security capabilities noted by NXP support protected code and data handling in industrial deployments. Typical applications include medical measurement devices such as glucose meters and patient monitoring front ends, industrial metering and data acquisition, and test-and-measurement equipment that benefits from the integrated analog engine. The Ethernet MAC supports connected field devices, while USB enables direct host or device interfaces. A key design consideration: the 144-ball MAPBGA requires careful PCB stack-up and fanout planning; ball-map routing with via-in-pad or dog-bone fanout on at least four layers is typical, and power integrity for the analog measurement modules demands dedicated clean supplies and solid ground planes. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, with all specifications traced to NXP and distributor data as of 2026-10-18.

RFQ İletişim
MK53DN512ZCMD10 - Kinetis K50 Cortex-M4 100MHz MCU | NXP
MK53DN512ZCMD10

MK53DN512ZCMD10 - Kinetis K50 Cortex-M4 100MHz MCU | NXP

The NXP Semiconductors MK53DN512ZCMD10 is a 32-bit ARM Cortex-M4 Kinetis K50 series microcontroller running at 100 MHz with 512 KB (512K x 8) on-chip flash memory, housed in a 144-ball MAPBGA (13x13 mm) package. It operates from 1.8 V, 2.5 V, or 3.3 V supply rails and integrates a floating-point unit and DSP acceleration for embedded applications. A microcontroller unit (MCU) is a single-chip embedded computer that combines a processor core, nonvolatile program memory, SRAM, and a rich set of peripherals on one die. Within the embedded systems hierarchy, the MK53DN512ZCMD10 sits in the Kinetis K5x measurement family (also referenced as the K50 series), a family distinguished by its integrated segment LCD controller and analog measurement peripherals, positioned above general-purpose Kinetis K1x/K2x parts and below the high-performance K6x/K7x tiers. Key features include the 100 MHz Cortex-M4 core with hardware FPU and DSP instructions, 512 KB of flash for program storage, an integrated segment LCD controller (the defining 'MED LCD' feature of this ordering code), and flexible 1.8 V / 2.5 V / 3.3 V operation that suits both battery-powered and industrial 3.3 V designs. The C temperature-grade code targets industrial operating ranges, and the MAPBGA ball-grid package provides high I/O density in a compact 13x13 mm footprint. Technically, the device implements NXP/Freescale's Kinetis architecture built on the ARM Cortex-M4 with a Harvard bus structure, tightly coupled flash acceleration, and peripheral sets including serial interfaces (UART, SPI, I2C), timers, and the analog subsystem typical of the K5 measurement family. Per the NXP product page, the part is described as a 'Flexible 32-bit Arm Cortex-M4F MCU with 512 KB flash memory, floating-point unit and DSP acceleration for embedded applications.' Typical applications include medical measurement instrumentation, industrial control panels with segment LCD displays, portable battery-operated meters, and building automation nodes - all use cases where an integrated LCD controller plus analog measurement peripherals reduce bill-of-material count. Design consideration: because this part is listed NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate newer Kinetis successors; the MAPBGA package also requires controlled-impedance, fine-pitch BGA PCB fabrication. This page synthesizes distributor listings, cross-reference comparisons, and lifecycle data not consolidated on the manufacturer page, with verified dates and drop-in alternatives.

RFQ İletişim
MK53DX256ZCLQ10 - 100MHz Cortex-M4 K53 Measurement MCU | NXP
MK53DX256ZCLQ10

MK53DX256ZCLQ10 - 100MHz Cortex-M4 K53 Measurement MCU | NXP

The NXP MK53DX256ZCLQ10 is a Kinetis K53 measurement microcontroller built around an ARM Cortex-M4 core with a single-precision floating point unit, operating at up to 100 MHz and integrating 256 KB of flash plus 64 KB of SRAM in a 144-pin LQFP (20x20 mm) package. According to distributor listings, the device exposes a Cortex-M4 core, 256 KB program flash, and 64 KB RAM, and is qualified to industrial-grade temperature and process tolerances. An ARM Cortex-M4 microcontroller is a 32-bit MCU class built on the ARMv7E-M architecture, combining deterministic interrupt response with DSP extensions and an optional FPU. Kinetis K5x devices belong to NXP's K50 measurement family, which itself sits in the K-series microcontroller hierarchy (K0x entry-level → K1x low-power → K2x connectivity → K4x LCD-segmented → K5x analog measurement → K6x/7x high-performance) within NXP's broader Kinetis microcontroller portfolio. The MK53DX256ZCLQ10 specifically targets analog measurement front-ends, integrating an analog measurement engine for medical and industrial applications. Key features include a 32-bit core with FPU, 100 MHz core clock, integrated USB 2.0 full-speed on-the-go (OTG), 10/100 Ethernet MAC, segment LCD controller, programmable gain amplifiers, 16-bit SAR ADC, and 12-bit DAC. The 144-pin LQFP package exposes a wide set of peripherals - UART, SPI, I2C, CAN, FlexTimer, DMA - enabling it to consolidate multiple front-end ICs in a measurement subsystem. The part uses a 1.71V to 3.6V supply rail with on-chip voltage regulation for core logic, providing brown-out detection and low-power stop/standby modes for battery-aware medical or metering designs. The analog chain - PGAs, 16-bit ADC, 12-bit DAC - is designed to drive instrumentation-grade signal conditioning, with internal voltage reference and flexible trigger sources for sample sequencing. Typical applications include medical point-of-care instrumentation (glucometers, blood-pressure monitors), industrial process meters, electronic weighing scales, smart energy / metering endpoints, and multi-parameter patient monitoring. Its USB OTG + Ethernet + segment-LCD integration makes it well suited to standalone or networked instruments with on-glass user feedback. When designing with this MCU, plan the analog front-end routing carefully - separate analog and digital grounds, place the 16-bit ADC reference capacitor near the dedicated REF pins, and use the segment LCD waveforms already generated on-chip to minimize external charge-pump circuitry. The product is currently in NXP's NRND (Not Recommended for New Designs) phase, so verify last-time-buy windows before committing to new production.

RFQ İletişim
MK60DN256VMD10 - Kinetis K60 Cortex-M4 100MHz MCU | NXP
MK60DN256VMD10

MK60DN256VMD10 - Kinetis K60 Cortex-M4 100MHz MCU | NXP

The NXP MK60DN256VMD10 is a Kinetis K60 series 32-bit microcontroller built on the ARM Cortex-M4 core, running at up to 100 MHz with 256 KB of on-chip flash memory, housed in a 144-ball MAPBGA package measuring 13 x 13 mm. The DN suffix denotes the 256 KB flash variant with IEEE 1588 Ethernet support, operating from 1.8 V, 2.5 V, or 3.3 V supply rails. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory (flash for code, SRAM for data), and peripherals on one die, forming the lowest level of the embedded-system hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. Unlike a microprocessor, an MCU requires no external memory chips, making it the default choice for compact, low-power control systems. Key features of the K60 family include the ARM Cortex-M4 core with DSP instructions and a hardware floating-point capable architecture, IEEE 1588 Ethernet MAC for precision networked timing, and advanced analog integration per NXP product documentation. The 100 MHz core clock supports single-cycle MAC operations typical of digital signal processing workloads. The K60 platform is built on NXP's Kinetis common-core architecture, meaning code, tools, and peripherals are shared across the Kinetis K family, simplifying migration between flash densities and package options. The 144-MAPBGA ball grid array provides high I/O density for peripheral-rich designs while remaining surface-mountable with standard reflow processes. Typical applications include industrial Ethernet nodes requiring IEEE 1588 precision time protocol, motor control systems leveraging the Cortex-M4 DSP capability, and embedded networking equipment. The 3.3 V operating range integrates directly with standard industrial logic levels. Designers should verify ball-map compatibility before layout reuse across K60 package variants, and confirm supply sequencing requirements per the manufacturer datasheet. According to NXP, the part is offered in tray packaging for production programming flows. This page synthesizes distributor listings, cross-reference data, drop-in alternatives, and practical design guidance not found in any single manufacturer datasheet.

RFQ İletişim
MK60DN512VLQ10 - K60 100MHz Cortex-M4 MCU 512KB | NXP
MK60DN512VLQ10

MK60DN512VLQ10 - K60 100MHz Cortex-M4 MCU 512KB | NXP

The NXP MK60DN512VLQ10 is an ARM Cortex-M4 Kinetis K60 microcontroller built around a 32-bit core running at 100 MHz, integrating 512 KB of program flash and 128 KB of SRAM in a 144-pin LQFP (20 mm x 20 mm) package. It targets connected industrial applications by combining an on-chip 10/100 Mbps Ethernet MAC with hardware cryptography acceleration, IEEE 1588 timestamp support, USB 2.0 full-speed on-the-go, and a 16-bit SAR ADC, all driven from a single 1.71 V to 3.6 V supply. A Kinetis K60 microcontroller is a member of the Cortex-M4 microcontroller family - a 32-bit microcontroller (MCU) class designed for deterministic real-time control with DSP extensions and a single-precision floating point unit. Within the broader taxonomy, it sits as MCU -> ARM Cortex-M MCU -> Kinetis K-series -> industrial-connected sub-family, and NXP positions it as a power-management IC companion for industrial gateway, smart energy, and factory automation designs where deterministic networking and on-chip crypto are deciding factors. Key features include 512 KB flash, 128 KB SRAM, 100 MHz Cortex-M4 with FPU, hardware AES/SHA/Random-Number Generator, USB 2.0 FS OTG, Ethernet 10/100 MAC with IEEE 1588, 16-bit ADC (DSA-aware), 12-bit DAC, multiple timers (FTM, PIT, LPTMR, RTC), and an operating voltage range of 1.71 V to 3.6 V. The 144-LQFP footprint delivers 100 usable GPIO, which is one of the largest in the Kinetis K-series and uniquely suited to multi-peripheral industrial nodes. Architecturally, the K60DN512 implements a Cortex-M4 core with single-precision FPU, a 16-channel DMA controller, 4 KB instruction cache/scratchpad RAM, and a multi-layer AIPS-Lite bus fabric. The integrated Ethernet MAC with 1588 timestamping offloads the CPU from timing-critical packet processing, while the on-chip RNG and AES/SHA engines accelerate TLS / IPSec handshakes common in connected industrial gateways. Typical applications include industrial Ethernet gateways, IEC 61850 / smart-grid substation controllers, factory automation PLCs, networked motor drives, USB-connected instrumentation, and HVAC controllers. The wide 1.71 V - 3.6 V supply range simplifies battery-backed and 3.3 V-rail designs without an additional LDO. When designing with the K60, reserve the upper 32 KB of flash for the IEC 1588-aware Ethernet buffer descriptor table and provision a 25 MHz crystal for the MAC reference clock - the integrated PHY interface does not generate this clock internally. Place a 4.7 uF + 0.1 uF decoupling pair within 5 mm of VDDA for ADC noise floor compliance. This page synthesizes distributor pricing for the LQFP-144 variant, drop-in alternatives within the Kinetis K10/K20/K60 family, and design notes not consolidated in any single distributor product page.

RFQ İletişim
MK60DN512VMC10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60DN512VMC10

MK60DN512VMC10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP (Freescale) MK60DN512VMC10 is a 32-bit Kinetis K60 microcontroller built on an Arm Cortex-M4 core running at up to 100 MHz, with 512 KB flash, 128 KB SRAM, Full-Speed USB, IEEE 1588 Ethernet, and a 121-pin MAP-BGA (8x8 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, sitting at the device level of the embedded-systems hierarchy (MCU -> embedded processor -> semiconductor). The Kinetis K60 family belongs to NXP's K-series 32-bit MCUs and targets connected, mixed-signal applications where an Arm Cortex-M4 CPU, analog integration, and industrial networking must coexist on one die. Key features of the MK60DN512VMC10 include the 100 MHz Cortex-M4 core with DSP instructions and a hardware floating-point-friendly pipeline for control loops, 512 KB (512K x 8) of on-chip flash program memory, and 128 KB of SRAM for data and stack. Connectivity spans CAN bus, EBI/EMI external bus, Ethernet, I2C, IrDA, SD, SPI, UART/USART, USB and USB OTG, while on-chip peripherals include DMA, I2S, low-voltage detection (LVD), power-on reset (POR), PWM and a watchdog timer (WDT). The device operates from 1.8 V, 2.5 V or 3.3 V supplies. Technically, the K60 sub-family integrates a 16-channel ADC-class analog front end concept, IEEE 1588 precision time protocol support in its Ethernet MAC, and a crossbar architecture that lets the DMA service multiple masters concurrently. The 121-MAPBGA (8x8 mm) footprint keeps board area compact while exposing 86 GPIO/IO lines for system expansion. Typical applications include industrial automation and motor control nodes requiring CAN and Ethernet, IEEE 1588 networked devices needing precision time synchronization, and USB-connected instrumentation using USB OTG. The combination of 100 MHz DSP capability and rich serial connectivity makes it a strong fit for gateways and data concentrators. Design consideration: the MAP-BGA package requires controlled-impedance PCB layout with via fan-out under the 0.8 mm pitch ball field, so plan the 3.3 V power tree and decoupling network before routing; the alternate 100-LQFP family members exist for hand-solderable designs. This page synthesizes distributor data, same-family drop-in alternatives, and practical design notes beyond what a single datasheet page provides.

RFQ İletişim
MK60DN512VMD10 - Kinetis K60 100MHz Cortex-M4 MCU 512KB | NXP
MK60DN512VMD10

MK60DN512VMD10 - Kinetis K60 100MHz Cortex-M4 MCU 512KB | NXP

The NXP Semiconductors MK60DN512VMD10 is a 32-bit ARM Cortex-M4 Kinetis K60 microcontroller operating at up to 100 MHz with 512 KB of flash memory and 128 KB of SRAM, housed in a 144-pin MAPBGA (13x13 mm) package. It features integrated full-speed USB, IEEE 1588 Ethernet MAC, hardware encryption, and advanced analog peripherals including two 16-bit SAR ADCs and two 12-bit DACs. What is a Kinetis K60 microcontroller? K60 is a family of microcontrollers within the Kinetis portfolio built on the ARM Cortex-M4 core, a 32-bit processor architecture designed for embedded applications that require DSP capability and deterministic real-time control. Within the broader taxonomy, the K60 sits at: microcontroller (MCU) -> ARM Cortex-M4 MCU -> Kinetis MCU -> Kinetis K-series (connectivity-focused). It targets industrial connectivity, building automation, smart energy, and motor control applications where Ethernet and USB connectivity are required alongside DSP-class signal processing. The MK60DN512VMD10 integrates a Cortex-M4 core with single-precision floating-point unit and DSP instructions, supported by 512 KB of program flash and 128 KB of SRAM. The device includes a 10/100 Mbps Ethernet MAC with IEEE 1588 precision time protocol hardware acceleration, a USB 2.0 full-speed device/host/on-the-go controller, multiple serial communication peripherals (UART, SPI, I2C, I2S), and a rich analog subsystem including 16-bit SAR ADCs and 12-bit DACs. Hardware encryption and tamper detection features support secure connected designs. The 144-MAPBGA (13x13 mm) package provides 66 general-purpose I/O pins while keeping the board footprint compact. Operating voltage spans 1.71 V to 3.6 V with an industrial temperature range of -40C to +105C, making the part suitable for industrial and consumer embedded designs. The Cortex-M4 DSP extensions enable on-chip audio codec, motor control loops, and signal conditioning without an external DSP. Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP, Modbus TCP), building automation controllers, smart energy and metering endpoints, USB peripherals, motor control drives, audio processing, and POS/financial terminals. The IEEE 1588 hardware timestamping makes it particularly suitable for synchronized motion control and distributed real-time networks. When designing with this part, ensure your PCB layout accommodates the 13x13 mm BGA footprint with appropriate microvia stack-up for fan-out routing. Validate BSDL boundary-scan coverage for production test, and reserve boot configuration pins (BOOTCFG0/1) to the correct state at reset for your chosen boot source. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60DN512ZVLQ10

MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK60DN512ZVLQ10 is a Kinetis K60 100MHz ARM Cortex-M4 microcontroller with 512KB Flash, 128KB SRAM, Full-Speed USB, and 10/100 Ethernet in a 144-LQFP (20x20mm) package. It integrates an IEEE 1588 Ethernet MAC, hardware encryption, and a rich peripheral set targeting industrial connectivity and human-machine interface applications. A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors. Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels. The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core. Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels. Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation. This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.

RFQ İletişim