Ürünler (44.000+)

MK60DN512ZVMC10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP
MK60DN512ZVMC10

MK60DN512ZVMC10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP

The NXP MK60DN512ZVMC10 is a Kinetis K60 series ARM Cortex-M4 microcontroller running at 100 MHz with 512 KB of embedded flash and 128 KB of SRAM, housed in a 121-pin MAPBGA (8x8 mm) package. The device integrates full-speed USB, IEEE 1588 Ethernet MAC, and analog peripherals for industrial control, motor drive, and connected embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically flash), working RAM, and a rich set of I/O peripherals into one package. MCUs form the lowest tier of the embedded-computing hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor. The Cortex-M4 core adds a single-precision floating-point unit and DSP extensions, making Kinetis K60 devices well suited to closed-loop algorithms and digital signal processing tasks that would overwhelm a Cortex-M0/M0+ part. Key features of the MK60DN512ZVMC10 include 512 KB of flash with flexible flash-memory controller, 128 KB of SRAM, USB 2.0 full-speed on-chip transceiver, 10/100 Ethernet MAC with IEEE 1588 precision-time-protocol support, multiple serial communication blocks, a 16-bit SAR ADC, and a wide operating voltage range from 1.71 V to 3.6 V. The 100 MHz core delivers 1.25 DMIPS/MHz while advanced low-power modes allow run, wait, stop, and very-low-power-stop operation for energy-conscious designs. The K60 architecture uses a Cortex-M4 core with a tightly-coupled memory subsystem, a multi-master AHB/APB bus matrix, and a flash-memory controller with a 4-channel RAM, with 128 KB of on-chip SRAM configurable as SRAM, banks, RAM, with 128 KB of on-chip SRAM, banks, RAM, with 128 KB of on-chip SRAM. The 8x8 mm MAPBGA package balances I/O density with reflow-friendly assembly, supporting fine-pitch fan-out for compact PCB layouts while keeping high-speed signal integrity manageable. Typical applications include industrial motor control and variable-frequency drives, building automation and HVAC controllers, smart energy meters with Ethernet connectivity, USB peripherals and human-interface devices, and point-of-sale terminals. The combination of Ethernet, USB, and a Cortex-M4 with FPU is rare at this part-count and price tier, enabling a single-chip solution where competitors typically require an external PHY or co-processor. When designing with this device, provide a stable 3.3 V or lower supply rail to VDD/VBAT, ensure the external 32.768 kHz crystal or oscillator is placed close to XTAL pins to minimize jitter, and follow the NXP reference manual for unlocking the flash-memory controller before in-application programming cycles. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
MK60DN512ZVMD10 - 100MHz ARM Cortex-M4 MCU, 512KB Flash, 144-MAPBGA | NXP
MK60DN512ZVMD10

MK60DN512ZVMD10 - 100MHz ARM Cortex-M4 MCU, 512KB Flash, 144-MAPBGA | NXP

The NXP MK60DN512ZVMD10 is a Kinetis K60 series 32-bit microcontroller based on the ARM Cortex-M4 core with FPU, operating at up to 100 MHz and integrating 512 KB of on-chip Flash memory in a 144-pin MAP-BGA (13x13 mm) package. It combines the Cortex-M4 DSP and single-precision floating-point engine with NXP's K60 peripheral set including Ethernet MAC, USB 2.0 full-speed on-the-go, CAN, and hardware encryption acceleration for secure connected designs. A Kinetis K60 MCU is a Cortex-M4-based microcontroller family targeting industrial connectivity, secure networked embedded nodes, and human-machine interface (HMI) applications where deterministic real-time control plus on-board connectivity replace a discrete MCU plus external PHY/bridge design. The K60 sits within NXP's broader Kinetis portfolio (K10/K20/K30/K40/K50/K60/K70) and serves as the high-integration tier that adds Ethernet, crypto, and USB OTG to the lower-tier K50 baseline. Key specifications include 512 KB Flash, 128 KB SRAM, 100 MHz maximum core frequency, 1.71 V to 3.6 V single-supply operation, and a -40C to +105C extended industrial temperature range. The device provides 16-bit SAR ADC, 12-bit DAC, FlexTimer, programmable delay block, low-power touch-sensing interface, and hardware cryptographic acceleration including AES, DES, and true random number generator (TRNG) for secure boot and secure communications. The integrated 10/100 Ethernet MAC with IEEE 1588 timestamp support, hardware encryption accelerator, and USB 2.0 FS OTG controller enable single-chip connected embedded nodes. The 144 MAP-BGA package exposes up to 100 GPIO and supports external memory bus interfaces for SDRAM and NAND/NOR Flash expansion when the internal 512 KB Flash and 128 KB SRAM are insufficient for the application. Typical applications include industrial Ethernet nodes (EtherCAT, PROFINET, EtherNet/IP), secure smart-grid energy meters, building automation gateways, factory automation controllers, secure POS terminals, and HMI panels with integrated touch. The wide 1.71V-3.6V supply range simplifies battery-backed designs and supports both 1.8V and 3.3V system rails from a single regulator. When designing with the K60, place a 100 nF decoupling capacitor adjacent to every VDD pin and a 4.7 uF bulk capacitor near the MAP-BGA's central VDD balls to suppress core-current transients. Enable the watchdog timer and clock-loss detection in production firmware - failure to do so is a common Kinetis field-return root cause per NXP ERB advisories. This page synthesizes distributor pricing, drop-in same-package alternatives, and application-level design notes beyond the manufacturer datasheet summary.

RFQ İletişim
MK60DX256VLL10 - Kinetis K60 100MHz Cortex-M4 MCU | NXP
MK60DX256VLL10

MK60DX256VLL10 - Kinetis K60 100MHz Cortex-M4 MCU | NXP

The NXP MK60DX256VLL10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K60 family, featuring a 100 MHz core with DSP instructions, 256 KB of flash, and 64 KB of SRAM, housed in a 100-pin LQFP package measuring 14 x 14 mm. The device integrates a USB 2.0 OTG controller, an Ethernet MAC, and advanced serial communication peripherals, making it a strong fit for connected embedded applications. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core with DSP extensions and (optionally) a single-precision floating-point unit, designed for deterministic real-time embedded workloads. The K60 belongs to NXP's Kinetis family of mixed-signal MCUs, which sit in the broader taxonomy of ARM Cortex-M microcontrollers -> 32-bit microcontrollers -> microcontrollers (MCUs) -> integrated circuits (ICs) -> semiconductors. K60 sub-family parts add connectivity features such as Ethernet and USB OTG on top of the baseline Kinetis K-series analog and timer integration. Key features of the MK60DX256VLL10 include an operating voltage range of 1.71 V to 3.6 V, ambient operating temperature from -40 C to +105 C, 66 general-purpose I/O pins, multiple low-power modes (Wait, Stop, VLLS), an integrated 16-bit ADC, and hardware cryptographic acceleration. The 100 MHz core with DSP instructions delivers 1.25 Dhrystone MIPS per MHz, giving ~125 DMIPS of integer compute. The combination of USB OTG, Ethernet, CAN, and FlexBus allows the device to act as a protocol bridge or as a networked sensor node. Typical applications include industrial Ethernet gateways, USB peripherals and device controllers, point-of-sale terminals, building automation controllers, and smart energy metering. The wide operating voltage and 105 C ambient rating also suit factory automation nodes that must survive warm enclosures. Designers should budget for an external 32 kHz RTC crystal and follow the reference PCB layout from the NXP K60 reference manual to ensure USB and Ethernet signal integrity. The internal DC-DC converter pin must be left unconnected on the LQFP-100 variant; on internal regulator parts, follow the recommended bulk + decoupling network exactly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the NXP K60 reference manual - information that the bare datasheet does not surface in one place.

RFQ İletişim
MK60FN1M0VLQ12 - K60 120MHz Cortex-M4F 1MB Flash MCU | NXP
MK60FN1M0VLQ12

MK60FN1M0VLQ12 - K60 120MHz Cortex-M4F 1MB Flash MCU | NXP

The NXP Semiconductors MK60FN1M0VLQ12 is a Kinetis K60 sub-family 32-bit ARM Cortex-M4F microcontroller integrating 1 MB of Flash and 128 KB of SRAM, operating at up to 120 MHz core frequency in a 144-pin LQFP (20x20 mm) package. It features dual USB 2.0 On-The-Go controllers (Full-Speed plus High-Speed), an IEEE 1588 Ethernet MAC, hardware encryption, and a 16-bit ADC subsystem, positioning it for industrial control and connected-embedded designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, peripherals, memory, and interface controllers into one package, enabling embedded intelligence in everything from appliances to automotive ECUs. The Cortex-M4F core adds a single-precision FPU and DSP extensions, while the Kinetis K-series sits within NXP's broader ARM Cortex-M portfolio targeting scalable performance from 50 MHz ultra-low-power variants up to multi-gigahertz crossover MCUs. This places the MK60FN1M0VLQ12 in the mid-performance tier optimized for mixed control + connectivity workloads. Key features of the MK60FN1M0VLQ12 include 1 MB Flash, 128 KB SRAM, 120 MHz maximum CPU frequency, supply voltage range of 1.71 V to 3.6 V, operating temperature range of -40C to +105C, integrated full-speed plus high-speed USB OTG, 10/100 Mbps Ethernet MAC with IEEE 1588, and a 16-bit SAR ADC. The LQFP-144 (20x20 mm) package exposes up to 100 GPIO pins, multiple serial peripherals (UART, SPI, I2C), an SDHC controller, and a flexible FlexTimer/PWM subsystem. Architecturally, the MK60FN1M0VLQ12 uses the Cortex-M4F core with NVIC, DSP instructions, and an FPU, paired with crossbar switch and AIPS-Lite peripheral bridges that allow simultaneous DMA-driven peripheral access without stalling the core. Hardware encryption is supported through on-chip acceleration, enabling secure boot, AES, and hashing without offloading to software. Typical applications include industrial Ethernet control nodes, USB audio interfaces, point-of-sale terminals, smart energy metering, building automation gateways, and motion-control drives. The combination of Ethernet plus dual USB plus 1 MB Flash is particularly well-matched to gateways that aggregate multiple fieldbus segments. When designing with this MCU, verify that the supply rail respects the 1.71 V to 3.6 V range and use low-ESR decoupling at each VDD/VSS pair. For USB high-speed operation, the dedicated PLL must be configured before enabling the HS controller; ignoring this prevents USB enumeration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
MK60FN1M0VMD12 - 1MB Flash Cortex-M4F Kinetis MCU | NXP
MK60FN1M0VMD12

MK60FN1M0VMD12 - 1MB Flash Cortex-M4F Kinetis MCU | NXP

The NXP MK60FN1M0VMD12 is a Kinetis K60 series 32-bit ARM Cortex-M4F microcontroller delivering 120 MHz CPU performance with 1 MB of on-chip Flash and 128 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package. It integrates dual USB (Full-Speed + High-Speed), 10/100 Ethernet MAC, and a rich peripheral set including FlexBus, SDRAM controller, and motor-control timers, making it a high-end member of the K60 sub-family. A Kinetis K60 MCU is an ARM Cortex-M4F microcontroller from NXP's Kinetis family of Cortex-M based devices. Kinetis microcontrollers span low-power K0/K1 (Cortex-M0+), mainstream K2x (Cortex-M4), high-performance K6x (Cortex-M4F with FPU + DSP), and application-specific K7x/K8x variants. The K60 specifically targets industrial control, connectivity-rich embedded designs, and human-machine interface (HMI) applications where Ethernet, USB, and graphics LCD support are required. Key features include the ARM Cortex-M4F core with single-precision FPU and DSP instructions, 120 MHz maximum CPU frequency, 1 MB Flash with FlexMemory EEPROM emulation, 128 KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamp support, USB 2.0 Full-Speed on-the-go plus USB 2.0 High-Speed PHY, and a 16-bit SAR ADC. Operating voltage is 1.71 V to 3.6 V with industrial temperature range of -40C to +105C. The MK60FN1M0VMD12 is fabricated in 90 nm TFS technology, providing deterministic interrupt latency and low-power run modes down to approximately 200 uA/MHz. Its Cortex-M4F DSP extensions enable efficient audio decoding and sensor fusion on-chip without external DSP ICs. The integrated 144-pin MAPBGA exposes 16 ADC channels, two FlexCAN modules, three SPI, three I2C, and two UART peripherals for broad system connectivity. Typical applications include industrial Ethernet-connected PLCs, USB-equipped HMI panels, building automation gateways, motor-control inverters, and audio-enabled point-of-sale terminals. The combination of Ethernet + dual USB + large memory uniquely fits IoT gateways and factory-automation controllers. Designers should plan for a 4-layer PCB with impedance-controlled USB differential routing when using the integrated HS-USB PHY, and follow NXP's K60 hardware design guidelines for SDRAM interface layout. An external 25 MHz or 50 MHz crystal is required for the Ethernet PHY reference clock. Free development is supported via MCUXpresso IDE with the older KSDK 1.x for this 120 MHz K60 sub-family. This page synthesizes distributor pricing, drop-in alternatives from the Kinetis K60 family and competitor Cortex-M4F parts, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
MK60FX512VMD12 - Kinetis K60 120MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60FX512VMD12

MK60FX512VMD12 - Kinetis K60 120MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK60FX512VMD12 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K60 sub-family operating at up to 120 MHz, integrating 512 KB of Flash memory plus 512 KB of FlexMemory and 128 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package. It combines high-performance DSP and FPU support with on-chip USB 2.0 Full-Speed/High-Speed, 10/100-Mbit Ethernet MAC, CAN, and a wide set of analog and timing peripherals. A Kinetis microcontroller (MCU) is a family of ARM Cortex-M based mixed-signal system-on-chip devices designed for industrial, automotive, and consumer embedded designs. Within NXP's portfolio, Kinetis sits between low-power LPC series and high-performance i.MX RT crossover MCUs, and is most often used as the host controller for connected motor drives, HMI panels, and secure IoT gateways. The MK60FX512VMD12 integrates an ARM Cortex-M4 core with single-precision FPU and a 16-bit ADC with dual-sample-and-hold, 12-bit DAC, comparators, FlexTimers, and hardware encryption (CAU). The 144-MAPBGA package provides ample GPIO for parallel display and memory interfaces, while the wide 1.71 V to 3.6 V supply range allows single-rail operation from a single Li-Ion or 3.3 V system supply. Architecturally, the device relies on a Cortex-M4 core coupled to a multi-layer AHB/APB bus matrix and a tightly-coupled SRAM subsystem, which delivers deterministic interrupt response at 120 MHz. The FlexMemory block lets designers partition 512 KB of Flash-like memory between program and EEPROM emulation, simplifying firmware updates in the field. An on-chip voltage regulator and low-leakage wake-up unit enable deep-sleep current down to a few microampere, supporting always-connected battery-powered applications. Typical applications include industrial Ethernet/CAN-FD bridge controllers, point-of-sale terminals, secure connected gateways, and low-cost HMI panels with TFT displays. The integrated USB 2.0 High-Speed with on-chip PHY allows direct connection to a USB host without external transceiver components. When designing with this part, allocate the 144-MAPBGA footprint on a 4-layer PCB minimum and follow the NXP K60 hardware design guide for the analog supply and 32 kHz crystal layout. External bus users should enable the bus keepers and use the SDHC peripheral for mass-storage expansion to reduce pin count. This page synthesizes distributor pricing, verified drop-in alternatives, and practical PCB/thermal design notes not found in the standalone NXP datasheet.

RFQ İletişim
MK61FN1M0VMJ15 - 150MHz Cortex-M4 K61 MCU, 1MB Flash | NXP
MK61FN1M0VMJ15

MK61FN1M0VMJ15 - 150MHz Cortex-M4 K61 MCU, 1MB Flash | NXP

The NXP Semiconductors MK61FN1M0VMJ15 is a Kinetis K61 series 32-bit microcontroller built on the ARM Cortex-M4 core with FPU, running at 150 MHz, integrating 1 MB of flash and 128 KB of SRAM, and housed in a 256-pin MAPBGA package (17x17 mm). It targets Ethernet-connected, USB-equipped industrial and consumer applications, combining high-performance signal processing with low-power operation. A microcontroller (MCU) is a single-chip processor integrating a CPU core, memory (flash/RAM), peripherals, and I/O on one die, used to sense, control, and communicate in embedded systems. The MK61 sits within the Cortex-M4 family (ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor), giving engineers deterministic real-time control plus DSP extensions. Key differentiating specifications include: 1 MB flash, 128 KB SRAM, hardware encryption acceleration (MMCAU), tamper detection, IEEE 1588 Ethernet MAC, USB 2.0 full-speed on-the-go, and anti-tamper pins. The 150 MHz core delivers 1.25 DMIPS/MHz with single-precision FPU for sensor fusion and audio processing. Operating voltage spans 1.71-3.6 V with multiple low-power modes (Run/Wait/Stop/VLPR/VLPS) for battery-friendly designs. Architecturally, the device pairs the Cortex-M4F core with a high-bandwidth AIPS-Lite bus matrix, dual 16-bit ADCs (up to 1.2 MSPS), DAC, FlexTimer modules, and an integrated PHY-less Ethernet MAC. The on-chip flash accelerator delivers zero-wait-state performance, supporting deterministic 150 MHz code execution. Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP gateways), USB peripherals, secure POS terminals, smart metering, building automation, and anti-tamper security panels. The MMCAU encryption engine and tamper pins make it well suited for payment terminals and metering devices. When designing with the MK61, ensure PCB layout accommodates the 256-ball MAPBGA escape pattern, observe the 1.71-3.6 V supply range, and route Ethernet differential pairs with controlled impedance per IEEE 802.3. This page synthesizes distributor pricing, drop-in K6x family alternatives, and practical K61 application notes not found on the manufacturer's parametric page alone.

RFQ İletişim
MK61FX512VMD15 - 150MHz Cortex-M4 512KB MCU | NXP
MK61FX512VMD15

MK61FX512VMD15 - 150MHz Cortex-M4 512KB MCU | NXP

The NXP Semiconductors MK61FX512VMD15 is a 32-bit ARM Cortex-M4 Kinetis K61 microcontroller running at 150 MHz with 512 KB flash, 512 KB FlexMem (configurable as additional flash or EEPROM), and 128 KB RAM, housed in a 144-pin MAPBGA (13 x 13 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded computing hierarchy: microcontroller -> embedded processor -> system-on-chip -> application processor. The Kinetis K61 sub-family sits at the high-performance end of NXP's Kinetis K-series MCU portfolio, targeting control algorithms, sensor data processing, and audio processing where computational headroom and security are both required. Key features of the MK61FX512VMD15 include the 150 MHz Cortex-M4 core with DSP instructions and floating-point unit, dual USB controllers (2x USB), an Ethernet MAC with IEEE 1588 support, and NXP's DryIce anti-tamper and encryption technology. The 512 KB FlexMem partition can be reallocated between program flash and emulated EEPROM, giving designers flexible non-volatile memory management for data logging and parameter storage. Technically, the device operates from 1.8V, 2.5V, or 3.3V supplies (per Arrow product data) and integrates analog and digital peripherals typical of the Kinetis K-family platform, including high-speed ADCs, timers, and serial interfaces. The M4F core's hardware FPU accelerates control loops and audio DSP algorithms, while the hardware crypto and tamper-detection subsystems protect firmware and sensitive data in connected industrial equipment. Typical applications include secure industrial automation nodes, networked motor-control and power-conversion systems, building control with Ethernet connectivity, medical instrumentation requiring tamper resistance, and audio processing endpoints leveraging the core DSP capability. When designing with this device, plan power-supply sequencing for the multi-rail operation and account for the 144-ball BGA layout early, since the package requires controlled-impedance routing for Ethernet and USB signals. This page synthesizes distributor pricing, drop-in alternatives within the Kinetis K-series, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
MK61FX512VMJ15 - Kinetis K61 150MHz Cortex-M4F MCU, 512KB Flash | NXP
MK61FX512VMJ15

MK61FX512VMJ15 - Kinetis K61 150MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK61FX512VMJ15 is a Kinetis K61 sub-family 32-bit ARM Cortex-M4F microcontroller running up to 150 MHz with an integrated single-precision FPU, 512 KB of program flash plus 512 KB of FlexMemory, and 128 KB of SRAM, housed in a 256-pin MAPBGA (17x17 mm) package. According to the NXP K61 sub-family datasheet, the device combines high-performance digital signal processing, two USB controllers (one with on-chip HS/FS PHY), a 10/100 Mbps Ethernet MAC with IEEE 1588 timestamp support, hardware encryption (AES, DES, 3DES, RSA, SHA), and a rich analog/mixed-signal peripheral set including 16-bit ADCs, DACs, comparators, and a flexible low-power timer subsystem. The part is qualified over the -40C to +105C industrial temperature range and supports 1.71V to 3.6V single-supply operation. A Kinetis microcontroller is a high-performance Cortex-M4F-based MCU with tightly integrated peripherals aimed at industrial connectivity, motor control, and secure IoT endpoints. MK61FX512VMJ15 belongs to the K60/K61/K70 family that shares ARM Cortex-M4 cores, peripherals, and software compatibility, allowing code reuse across performance, memory-density, and feature variations within one ecosystem. Key features of MK61FX512VMJ15 include 150 MHz Cortex-M4F core with DSP instructions, 512 KB flash + 512 KB FlexMemory (EEPROM emulation), 128 KB SRAM, two USB controllers (HS/FS USB 2.0 OTG), Ethernet MAC with 1588 support, anti-tamper pins, hardware cryptographic acceleration, 16-bit SAR ADC, 12-bit DAC, multiple FlexTimers, low-power run/wait/Stop modes, and 256-pin MAPBGA package offering compact board layout for industrial designs. Architecturally the K61 integrates an ARM Cortex-M4F core with FPU and DSP extensions, a multi-purpose DMA engine, crossbar switch for concurrent master access to RAM and peripherals, and a wide peripheral set. The hardware crypto module accelerates symmetric and asymmetric algorithms offloading the CPU for TLS/DTLS, secure boot, and data-at-rest protection. Typical applications for MK61FX512VMJ15 include industrial control PLCs, secure IoT gateways, motor control drives, smart energy metering, point-of-sale terminals, and audio processing systems. The 150 MHz DSP core plus hardware crypto make it well-suited for deterministic real-time control with secure cloud connectivity. When designing with this device, pay close attention to decoupling capacitor placement around the 256-ball MAPBGA and follow NXP's PCB layout recommendations to maintain signal integrity on high-speed USB and Ethernet interfaces. Plan firmware around the Kinetis SDK and Processor Expert for fast peripheral bring-up. This page synthesizes distributor pricing, drop-in alternatives from the same Kinetis K6x family, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12

MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP

The NXP MK64FN1M0VLL12 is a Kinetis K64 sub-family microcontroller built on the ARM Cortex-M4F core running at up to 120 MHz with 1 MB of embedded Flash and 256 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. It integrates a full-speed USB 2.0 On-The-Go controller, a 10/100 Mbps Ethernet MAC with MII/RMII, hardware encryption (AES, DES, SHA, RSA), and a rich analog/digital peripheral set including 16-bit SAR ADC, 12-bit DAC, comparators, FlexIO, and multiple timers. What is a Kinetis K-series microcontroller? The Kinetis K-series is NXP's portfolio of pin-, peripheral- and software-compatible ARM Cortex-M4F microcontrollers designed for low-power, mixed-signal embedded applications. The K64 sub-family specifically targets cost-effective connected nodes that require USB, Ethernet, and hardware-accelerated cryptography, placing it in the broader hierarchy: microcontroller (MCU) -> 32-bit MCU -> ARM Cortex-M MCU -> connected MCU -> industrial/IoT edge device. Key features include up to 120 MHz CPU with single-precision FPU and DSP instructions, 1 MB Flash with 256 KB SRAM, 4 KB FlexCache (in FlexMemory parts only - this part uses Non-Flex FTFE flash), full-speed USB OTG with on-chip FS PHY, 10/100 Ethernet MAC, multiple low-power modes (Run, Wait, Stop, VLPR, VLPS, LLS, VLLSx) with down to sub-uA RTC retention, and an operating voltage range of 1.71 V to 3.6 V supporting 1.8 V, 2.5 V, and 3.3 V rails. The K64 architecture pairs a Cortex-M4F core with a crossbar switch, a 4-channel DMA controller, and an efficient bit-band alias region. The hardware cryptography acceleration (AES-128, AES-256, DES, 3DES, SHA-1, SHA-256, RSA, and a true random number generator) makes it well suited to TLS/SSL offload in IoT edge nodes where software cryptography would starve the Cortex-M4F. Typical applications include industrial IoT gateways with Ethernet and USB, secure connected sensors, low-power motor control nodes, building automation controllers, and Ethernet-attached metering/lighting nodes. The integrated Ethernet MAC and USB OTG remove the need for an external PHY companion, reducing BOM cost and PCB area. When designing with the MK64FN1M0VLL12, provide a decoupling network of 100 nF X7R capacitors on each VDD pin and a bulk 4.7 uF on the main 3.3 V rail; place the 32.768 kHz crystal load capacitors as close to the XTAL32 pins as possible to avoid jitter on the PLL-derived system clock. Note that this part uses Non-Flex (FTFE) memory with 4 KB sectors programmed in 8-byte phrases - if your toolchain assumes 2 KB sector / 4-byte longword FlexMemory (FTFL) programming, reprogram the flash driver accordingly. This page synthesizes distributor pricing, drop-in alternatives, and practical K64 design notes not found in the manufacturer datasheet.

RFQ İletişim
MK64FN1M0VLQ12 - 120MHz Cortex-M4F MCU 1MB Flash LQFP-144 | NXP
MK64FN1M0VLQ12

MK64FN1M0VLQ12 - 120MHz Cortex-M4F MCU 1MB Flash LQFP-144 | NXP

The NXP MK64FN1M0VLQ12 is a 32-bit ARM Cortex-M4 microcontroller with FPU from the Kinetis K64 sub-family, featuring 120 MHz CPU speed, 1 MB Flash and 256 KB SRAM in a 144-pin LQFP (20x20 mm) package. It integrates Full-Speed USB 2.0 with on-chip transceiver, 10/100 Mbps Ethernet MAC with IEEE 1588 precision time protocol, and a wide set of analog and digital peripherals for connected industrial designs. A Kinetis K64 sub-family MCU is a Cortex-M4 based microcontroller optimized for low-power, USB/Ethernet-connected applications that require large on-chip memory. The K64 sub-family sits within the broader Kinetis K series, which provides pin-, peripheral-, and software-compatible Cortex-M4 devices from 50 MHz to 180 MHz. As such, the MK64FN1M0VLQ12 acts as a system-on-chip solution for gateways, smart sensors, and human-machine interface (HMI) controllers where Ethernet and USB connectivity, deterministic real-time behaviour, and low active current are simultaneously required. Key features include 1 MB of program Flash, 256 KB of SRAM, four 16-bit ADCs (up to 818 ksps in 12-bit mode), two 12-bit DACs, multiple timer/PWM modules (FlexTimer, PDB, PIT), three SPI, four I2C, six UART, CAN, and I2S/SAI audio interfaces. An integrated 1.2 V core regulator with on-chip LDO and low-power run/wait/very-low-power-stop modes enable battery-friendly operation down to single-digit mA active current. The 144-LQFP (LQ) package exposes the full peripheral set including the EMAC/MII, USB OTG, and external memory bus (FlexBus). Architecturally, the device pairs an Arm Cortex-M4F core (single-precision FPU, DSP extensions, MPU) with a multi-layer AIPS-Lite bus matrix, dedicated DMA (eDMA) channels, and a flexible clock distribution tree driven by FLL/PLL blocks from an internal 50 MHz reference. Security and reliability features include a hardware CRC module, watchdog, external watchdog monitor, and JTAG/SWD debug. The K64 sub-family is supported by NXP Kinetis SDK 2.x, MCUXpresso IDE, and the FreeRTOS/Amazon FreeRTOS ecosystem, ensuring long-term software compatibility across pin-compatible K-series variants. Typical applications include industrial Ethernet IO modules, building automation controllers, smart energy gateways, USB-to-Ethernet bridges, HMI panels, and low-power connected sensor nodes. The combination of Ethernet MAC and USB OTG makes it a strong choice for protocol converters and IoT edge devices that must serve both fieldbus and host connectivity from a single MCU. When designing with the MK64FN1M0VLQ12, ensure the LQFP-144 PCB layout dedicates separate ground returns for the analog and digital domains and that the 1.2 V core supply decoupling is sized per the reference manual; otherwise noise coupling into the ADCs will degrade SNR. For lower-cost variants, the K22F and K24F sub-families offer pin compatibility at smaller flash densities. This page synthesizes distributor pricing, pin-compatible LQFP-144 alternatives from the same Kinetis family, and practical design notes that complement the manufacturer reference manual (K64P144M120SF5RM).

RFQ İletişim
MK64FX512VMD12 - 120MHz ARM Cortex-M4 MCU 512KB Flash | NXP
MK64FX512VMD12

MK64FX512VMD12 - 120MHz ARM Cortex-M4 MCU 512KB Flash | NXP

The NXP Semiconductors MK64FX512VMD12 is a 120 MHz ARM Cortex-M4 microcontroller with FPU and DSP instructions, integrating 512 KB of program flash and 256 KB of SRAM, packaged in a 144-pin MAP-BGA (13x13 mm). It is part of the Kinetis K64 sub-family and operates from 1.71 V to 3.6 V, making it suitable for both 2.5 V and 3.3 V system rails. An ARM Cortex-M4 MCU is a 32-bit RISC processor core with a hardware single-precision floating-point unit and DSP extensions (MAC, SIMD), optimized for deterministic real-time control. Within the NXP portfolio, Kinetis MCUs belong to the broader K6x/K6x sub-family hierarchy: Cortex-M4 core -> Kinetis MCU family -> 32-bit microcontroller -> embedded processor -> semiconductor. The K64 sub-family specifically targets industrial connectivity and low-power IoT gateway applications. Key features include a 16-bit ADC with up to 24 channels, a 12-bit DAC, two 12-bit ADCs and 12-bit DAC, four 32-bit timers, two CAN 2.0B controllers, USB 2.0 full-speed with on-chip transceiver, 10/100 Ethernet MAC, and a low-power segment LCD controller (in some K64 variants). The integrated FPU accelerates single-precision math, and DSP instructions enable efficient sensor-fusion and motor-control algorithms at the boundary between MCU and DSP performance. Typical applications include industrial control PLCs and HMI panels, secure connected IoT gateways with Ethernet/USB, factory automation sensor nodes, low-power handheld measurement instruments, and H-bridge / 3-phase motor control (FOC, sinusoidal commutation) where the FPU + DSP combination removes the need for a separate DSP chip. When designing with this device, ensure the BGA land pattern follows the JEDEC MS-034 ball-pad geometry for 144-MAPBGA, and pay attention to the four corner balls for thermal pad and decoupling placement. The internal 1.2 V core regulator requires at least 4.7 uF of low-ESR ceramic capacitance on the VCAP pin to maintain regulation under dynamic load. This page synthesizes distributor pricing across DigiKey/Mouser/LCSC, alternative cross-reference findings, and practical design notes not found on any single distributor page.

RFQ İletişim
MK65FX1M0VMI18 - Kinetis K65 180MHz Cortex-M4 MCU 1MB Flash | NXP
MK65FX1M0VMI18

MK65FX1M0VMI18 - Kinetis K65 180MHz Cortex-M4 MCU 1MB Flash | NXP

The NXP MK65FX1M0VMI18 is a Kinetis K65 32-bit ARM Cortex-M4 microcontroller with hardware encryption and tamper detection, 180 MHz core clock, 1 MB Flash, and integrated 10/100 Ethernet MAC, housed in a 169-pin MAPBGA (9x9 mm) package optimized for industrial, medical, and security-sensitive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The Cortex-M4 is an ARM processor core specifically engineered for deterministic, real-time embedded control with DSP and single-precision FPU extensions. Microcontrollers in the Kinetis family target general-purpose and connectivity-rich embedded designs where on-chip Ethernet, USB, CAN, and security accelerators reduce system BOM and PCB complexity. Within the broader taxonomy, this part sits in the application-specific MCU sub-category, one tier above commodity Cortex-M0 devices and one tier below the Cortex-M7 high-performance line used in graphical HMI. Key features include 1 MB of embedded Flash and 256 KB of SRAM, two USB controllers (one with on-chip HS PHY), an integrated 10/100 Ethernet MAC with 1588 hardware timestamping, hardware AES and DES cryptographic accelerators, a true random number generator, and a passive tamper-detection grid. The ARM Cortex-M4 core with FPU delivers 180 MHz throughput and 1.25 DMIPS/MHz, while the integrated interrupt controller supports deterministic low-latency response required for industrial protocols. The K65 silicon integrates 12-bit ADCs, multiple DAC channels, FlexTimers, an SDHC interface, and a wide operating voltage range from 1.71 V to 3.6 V. The MAPBGA-169 (VMI) package exposes a 16-bit external bus for SDRAM expansion and supports a wide industrial temperature grade. Compared to lower-tier Kinetis K10/K20 devices, the K65 doubles Flash/RAM and adds Ethernet plus a second USB port. Typical applications include industrial Ethernet-based PLCs and IO-Link masters, secure point-of-sale terminals with hardware AES, medical patient monitors requiring tampered-event logging, and building automation gateways. The combination of hardware encryption, IEEE 1588 timestamping, and deterministic Cortex-M4 control loops makes it well suited to Industry 4.0 protocols such as PROFINET, EtherCAT, and EtherNet/IP. When designing with this device, plan a 4-layer PCB with continuous ground and stitched power planes to keep the MAPBGA-169 BGA return paths short, and place a 0.1 µF decoupling capacitor within 2 mm of every VDD pin. Ensure that the tamper grid is properly isolated from noise sources if it is routed across the PCB, and verify that the SDHC bus trace length matches the 50 Ω impedance requirement when using high-speed SD cards. This page synthesizes distributor pricing, drop-in alternatives from the same NXP family, and practical design notes not found in the manufacturer's datasheet.

RFQ İletişim
MK66FN2M0VLQ18 - 180MHz Cortex-M4F 2MB MCU | NXP
MK66FN2M0VLQ18

MK66FN2M0VLQ18 - 180MHz Cortex-M4F 2MB MCU | NXP

The NXP Semiconductors MK66FN2M0VLQ18 is a 180 MHz ARM Cortex-M4F microcontroller with 2 MB flash memory, 256 KB SRAM, and a 144-LQFP 20 x 20 mm package. It combines advanced mixed-signal control connectivity and dual USB support for demanding embedded systems. According to the NXP product information and distributor records, this device is suited to complex control systems that require substantial local memory and extensive peripheral integration. A microcontroller is a programmable embedded controller that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as communications ports, timers, analog converters, and digital I/O on one chip. The ARM Cortex-M4F core includes single-precision floating-point instructions for efficient control calculations, while large on-chip memories reduce external bus traffic and system complexity. This places the device in the 32-bit MCU, embedded processor, and industrial control hierarchy. The principal features include a 180 MHz maximum core frequency, 2 MB flash organized as 2M x 8, 256 KB SRAM, and both full-speed and high-speed USB support identified by the verified Kinetis K66 data. The integrated connectivity also includes Ethernet support. These interfaces enable a single controller to manage communications, real-time control loops, data acquisition, and user-facing functions without requiring several discrete interface devices. The Kinetis K66 architecture targets applications requiring large memory densities and low-power processing. Its Cortex-M4F core can accelerate digital filtering, motor-control mathematics, and general numeric workloads, while on-chip SRAM provides working memory for networking stacks and buffering. Exact cache, floating-point pipeline, power-state, and peripheral timing details should be confirmed in the NXP manufacturer datasheet before final qualification. Typical uses include industrial Ethernet controllers, USB-connected data acquisition, building and automation controllers, motor-control systems, and complex human-machine-interface equipment. The two USB controllers can support different device roles or peripheral functions, while Ethernet is useful for connected control platforms. These applications benefit from local program storage, fast deterministic execution, and a broad set of integrated interfaces. Design planning should include package-specific PCB layout, correct decoupling, clock configuration, boot-strapping, and firmware support for the selected USB mode. High-speed USB may require additional PLL and signal-integrity implementation, as noted in NXP community guidance. Engineers should also verify the complete pin mapping and peripheral instance availability against the manufacturer documentation before schematic capture. This page combines verified manufacturer and distributor facts with application guidance, selection trade-offs, and engineering-focused comparisons. It identifies the K66’s memory, core-frequency, USB, Ethernet, and package advantages without implying that differently packaged or architecturally incompatible devices are drop-in replacements.

RFQ İletişim
MK66FN2M0VMD18 - 180MHz Cortex-M4F MCU, 2MB Flash, 144-MAPBGA
MK66FN2M0VMD18

MK66FN2M0VMD18 - 180MHz Cortex-M4F MCU, 2MB Flash, 144-MAPBGA

The NXP MK66FN2M0VMD18 is a high-performance 32-bit ARM Cortex-M4F microcontroller from the Kinetis K66 sub-family, delivering up to 180 MHz core frequency with a single-precision floating-point unit. It integrates 2 MB of flash memory and 256 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package, designed for industrial and embedded applications requiring large memory density, dual USB (FS + HS) connectivity, and 10/100 Mbit/s Ethernet MAC with IEEE 1588 precision time protocol support. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. Within the system hierarchy, MK66FN2M0VMD18 sits at: microcontroller -> embedded processor -> semiconductor. The Cortex-M4F core enables DSP instructions and FPU-based floating-point math, while the rich peripheral set (USB, Ethernet, CAN, SDHC, multiple timers, ADCs) supports complex industrial protocols without external coprocessors. The K66 maintains hardware/software compatibility with the broader Kinetis family, simplifying migration between K60, K64, and K66 sub-families. Key features include 2 MB program flash, 256 KB SRAM, dual USB 2.0 controllers (one full-speed, one high-speed ULPI-capable), IEEE 1588 Ethernet MAC, hardware cryptography (AES, DES, SHA), 16-bit ADC, 12-bit DAC, FlexTimers, low-power modes with RTC wake-up, and an operating voltage range of 1.71 V to 3.6 V. The device supports -40C to +105C extended industrial temperature grades. Architecturally, the MK66FN2M0VMD18 uses NXP's low-leakage process technology with an integrated voltage regulator and multiple low-power modes (VLPR, VLLS, STOP). The 144-MAPBGA package provides a compact 13x13 mm footprint suitable for space-constrained designs while maintaining robust thermal performance and full GPIO access. Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP gateways), building automation controllers, point-of-sale terminals, industrial HMI panels, USB/Ethernet bridges, and IoT edge gateways. The dual-USB and Ethernet MAC make it ideal for connected industrial devices that require both wired networking and USB device/host functionality. When designing with this part, ensure the 144-MAPBGA PCB footprint has proper microvia/stacked-via escape routing. Use the NXP MCUXpresso IDE or Kinetis SDK for firmware development. Power decoupling requires bulk + bypass capacitors adjacent to each VDD pin group. This page synthesizes distributor pricing, cross-reference data, and practical engineering notes for the MK66FN2M0VMD18 not found in the manufacturer datasheet alone, providing engineers with a consolidated decision-making resource.

RFQ İletişim
MK66FX1M0VLQ18 - Kinetis K66 180MHz Cortex-M4F MCU, 1MB Flash | NXP
MK66FX1M0VLQ18

MK66FX1M0VLQ18 - Kinetis K66 180MHz Cortex-M4F MCU, 1MB Flash | NXP

The NXP Semiconductors MK66FX1M0VLQ18 is a high-performance 32-bit ARM Cortex-M4F microcontroller from the Kinetis K66 sub-family, running at up to 180 MHz with an integrated single-precision FPU and DSP instructions. It integrates 1 MB of program flash and 256 KB of SRAM on-chip, and is delivered in a 144-pin LQFP (20x20 mm) package optimized for industrial Ethernet and USB-OTG designs. A microcontroller (MCU) is a single-chip computer that combines a CPU core, volatile and non-volatile memory, peripherals, and I/O. The Cortex-M4F is ARM's embedded core with hardware floating-point, deterministic interrupts, and DSP extensions tailored for real-time signal processing. The Kinetis K66 sub-family sits in NXP's mid-to-high tier of Kinetis MCUs, balancing large memory density with low-power modes for energy-constrained connected products. Key features of the MK66FX1M0VLQ18 include IEEE 1588 hardware Ethernet, dual USB-OTG controllers with on-chip HS PHY, a 16-bit ADC with DMA, multiple UART/SPI/I2C modules, an SDHC interface, a hardware encryption module (CAU), and FlexTimer/PWM blocks. The 144-LQFP footprint exposes up to 100 GPIO, with 5V-tolerant I/O for mixed-voltage designs and a 1.71-3.6V operating supply range. The K66 architecture uses a 90nm low-power process, multi-layer AHB bus matrix, and low-leakage SRAM retention that yields run-mode current under 1 mA/MHz and deep-sleep currents below 5 uA. The device includes an MMCAU accelerator for AES, DES, and SHA hash offload, freeing CPU cycles for protocol stacks. Typical applications include industrial IoT gateways with EtherCAT or PROFINET bridging, USB instrumentation, point-of-sale terminals, smart metering, motor-control reference designs, and audio processing nodes. The large flash supports full TCP/IP stacks plus application firmware without external memory. When designing, ensure proper decoupling (100 nF + 4.7 uF per VDD/VSS pair) and route the differential USB and Ethernet impedance-controlled traces per NXP application note AN4830. Verify JTAG/SWD pull-ups for in-circuit debug sessions. This page consolidates distributor stock, drop-in K6x alternatives, and practical layout notes that complement - not duplicate - the NXP K66 datasheet.

RFQ İletişim
MK70FN1M0VMJ15 - 150MHz Cortex-M4 MCU, 1MB Flash | NXP
MK70FN1M0VMJ15

MK70FN1M0VMJ15 - 150MHz Cortex-M4 MCU, 1MB Flash | NXP

The NXP Semiconductors MK70FN1M0VMJ15 is a 32-bit ARM Cortex-M4 Kinetis K70 microcontroller running at up to 150 MHz, integrating 1 MB of program flash and 128 KB of SRAM in a 256-ball MAP-BGA (17x17) package. The K70 sub-family combines a Cortex-M4 core with single-precision FPU, a graphic LCD controller, two USB controllers (FS and HS), an Ethernet MAC, and a rich analog/mixed-signal peripheral set for human-machine interface and connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and configurable peripherals on one silicon die. Within the broader semiconductor taxonomy, microcontrollers sit under microprocessors and embedded processors, and within the Kinetis family they are categorized as Cortex-M4 based mixed-signal MCUs optimized for low-power and graphics-rich HMI applications. The K70 targets single-chip QVGA color displays and can be paired with external memory to drive up to SVGA panels. Key features include 1 MB Flash, 128 KB SRAM, IEEE 1588 hardware timestamps, a 16-bit SAR ADC with up to 4 channels, two 12-bit DACs, a low-power timer, real-time clock, carrier modulator transmitter, and USB 2.0 full-/high-speed OTG with on-chip HS PHY. The device operates from 1.71 V to 3.6 V, supports multiple low-power modes (Wait, Very-Low-Power Wait, Stop, VLLS), and the 256 MAP-BGA package provides the I/O density needed for display, Ethernet, and USB interfaces running concurrently. Architecturally, the K70 uses an ARM Cortex-M4 core with DSP extensions and a single-precision floating-point unit, enabling deterministic interrupt response and efficient signal-processing workloads. The integrated graphic LCD controller, TFT and segment LCD support, and anti-aliasing hardware accelerate rich UI rendering without burdening the CPU. The 150 MHz core mark, paired with tightly-coupled peripherals, places the MK70FN1M0VMJ15 squarely in the high-performance, mixed-signal HMI MCU tier of the Kinetis portfolio. Typical applications include industrial control panels with color TFT displays, point-of-sale terminals and kiosks, navigational displays, medical patient-monitoring equipment with graphical UIs, and connected building/HVAC controllers with Ethernet connectivity. The integrated Ethernet MAC and dual USB OTG allow the MK70FN1M0VMJ15 to serve as a bridge MCU between local touch/display interfaces and networked back-ends. When designing with the MK70FN1M0VMJ15, ensure the 256-ball BGA layout uses microvia-compatible PCB stack-up, route HS USB differential pairs with 90 ohm differential impedance, and provide adequate decoupling for the multiple supply rails. Plan boot configuration straps (BOOTCFG0/1) for in-system Flash programming and consider the device's industrial temperature range when validating in HMI enclosures.

RFQ İletişim
MK70FX512VMJ12 - 120MHz Cortex-M4 MCU, 512KB Flash | NXP
MK70FX512VMJ12

MK70FX512VMJ12 - 120MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK70FX512VMJ12 is a Kinetis K70 32-bit ARM Cortex-M4 microcontroller with FPU operating at up to 120 MHz, integrating 512 KB of program flash and 512 KB of FlexMemory on-chip, plus 128 KB SRAM, two USB controllers (one with on-chip HS/LS PHY), an Ethernet MAC, hardware encryption, and an integrated TFT/LCD controller, packaged in a 256-ball MAP-BGA (17 x 17 mm, tray). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. Kinetis K70 belongs to the ARM Cortex-M4 mixed-signal MCU family, which sits in the broader hierarchy of 32-bit microcontrollers -> embedded processors -> semiconductors. Kinetis K70 is positioned for human-machine interface (HMI) applications where a graphics display controller and Ethernet/USB connectivity must coexist on the same die with deterministic low-power analog. Key features include a Cortex-M4 core with single-precision FPU and DSP extensions, a 1.71 V to 3.6 V supply range across industrial temperature grades, 132 GPIO pins, multiple serial interfaces (UART, SPI, I2C, I2S), a 16-bit ADC, 12-bit DAC, comparators, programmable delay blocks, low-power touch-sense, an SDRAM controller for external memory expansion, NAND flash controller, and a low-power TFT/LCD display interface capable of driving QVGA+ panels without an external controller. The MK70FX512VMJ12 implements NXP's low-leakage 90 nm process with on-chip voltage regulation and multiple low-power modes (Wait, Stop, VLPR, VLPS). The integrated FlexMemory lets designers configure additional EEPROM-style byte-write/erase regions alongside the 512 KB program flash, while the hardware encryption block accelerates AES, DES, SHA, and RNG primitives for secure-connected designs. Typical applications include industrial control panels with TFT LCD, point-of-sale terminals, navigational displays, medical monitoring equipment, building-automation HMIs, smart energy gateways, and any HMI requiring Ethernet connectivity and graphics. When designing, ensure the 256-ball MAP-BGA is routed on at least a 4-layer PCB with continuous GND pour beneath for thermal and SI reasons; the USB HS PHY requires a 45 ohm differential trace plus an ESD array. Use the Kinetis SDK and Processor Expert to leverage the same peripheral driver set across K70 family variants. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not collated in the manufacturer datasheet alone.

RFQ İletişim
MK70FX512VMJ15 - 150MHz Kinetis K70 Cortex-M4 MCU | NXP
MK70FX512VMJ15

MK70FX512VMJ15 - 150MHz Kinetis K70 Cortex-M4 MCU | NXP

The NXP MK70FX512VMJ15 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K70 sub-family, operating at up to 150 MHz with FPU and DSP instructions, and integrating 512 KB of program flash plus 512 KB of FlexMemory and 128 KB of SRAM in a 256-pin MAPBGA (17x17 mm) package. A Kinetis K-series microcontroller is a low-power mixed-signal MCU that combines a Cortex-M4 core, on-chip analog peripherals, hardware crypto, and connectivity such as Ethernet, USB, and an LCD segment/dot-matrix driver, intended for applications that need a single chip to drive a color QVGA display while running communication stacks. Within the NXP taxonomy it sits in the hierarchy: Kinetis K70 -> K-series -> Kinetis -> 32-bit MCU -> microcontroller -> semiconductor, and is the K70 sub-family member optimized for color QVGA TFT panels and segment LCDs. Key features of the MK70FX512VMJ15 include an integrated TSI touch-sensing interface, hardware encryption (AES, DES, SHA), a 16-bit ADC with up to 64 channels, a 12-bit DAC, multiple timer/PWM blocks, two USB controllers (one with HS ULPI PHY), and an Ethernet MAC with IEEE 1588 support, all powered from a 1.71-3.6 V supply. The 256-pin MAPBGA exposes 8-bit and 16-bit SDRAM/DDR memory interfaces, ideal for buffered LCD panels. Architecturally the part uses a Cortex-M4 core with single-precision FPU and DSP extensions, JTAG/SWD debug, and a Cortex-M4 trace macrocell. The on-chip regulator supports low-power Run, Wait, Stop, and VLPR/VLPS modes, and the FlexMemory lets engineers configure EEPROM-like regions for data logging. Mixed-signal integration is a hallmark: dual 16-bit ADCs, 12-bit DAC, comparators with 6-bit DAC, and a 1.2 V internal voltage reference. Typical applications include industrial control panels with TFT/LCD HMI, navigational displays, point-of-sale terminals, medical patient-monitoring equipment, and graphical data-acquisition panels where Ethernet or USB OTG connectivity is required. The integrated SDRAM/DDR controller also suits portable medical instruments and barcode-scanner HMI. A key design consideration when using the MK70FX512VMJ15 is the 256-pin MAPBGA layout, which requires microvia and HDI PCB technology for escape routing; engineers should plan for at least four layers and follow NXP's K70 hardware design notes for SDRAM signal integrity and decoupling. This page synthesizes distributor pricing, drop-in same-family alternatives from the K70 sub-family, and practical design notes not found in the manufacturer datasheet, so engineers can shorten the BOM-validation cycle for this part.

RFQ İletişim
MKE02Z16VFM4 - 40MHz Cortex-M0+ 16KB MCU | NXP
MKE02Z16VFM4

MKE02Z16VFM4 - 40MHz Cortex-M0+ 16KB MCU | NXP

The NXP Semiconductors MKE02Z16VFM4 is an entry-level 32-bit Kinetis KE02 microcontroller built around a 40 MHz Arm Cortex-M0+ processor. It provides 16 KB of flash memory, 2 KB of SRAM, integrated analog peripherals, flexible timer modules, and a 32-HVQFN package measuring 5 mm by 5 mm. The device is positioned for cost-sensitive automotive and industrial applications that require compact embedded control without a high-pin-count microcontroller package. An MCU is a semiconductor device that combines a processor core, programmable memory, data memory, and peripherals such as timers, serial interfaces, analog-to-digital converters, and communication blocks on one integrated circuit. The MKE02Z16VFM4 belongs to the Kinetis E series, where its Arm Cortex-M0+ architecture provides a compact, low-complexity platform for control logic, sensing, monitoring, and basic communications. Its small QFN package supports space-constrained equipment while retaining a useful mix of digital and analog functions. The principal device characteristics include a 40 MHz maximum core frequency, 16 KB flash, and 2 KB SRAM. The KE02 platform also includes flexible timer modules and integrated analog peripherals, making it suitable for sensor acquisition, actuator control, timing functions, and embedded motor or industrial-control subsystems. NXP markets this device for cost-sensitive automotive and industrial designs, where its combination of memory capacity, analog integration, and package size can reduce the number of supporting components. The 32-HVQFN package includes an exposed thermal pad for improved heat transfer from the device. Board layout therefore requires a properly filled and connected thermal land rather than treating the underside pad as an unused pin. Although the core is an Arm Cortex-M0+ design, the peripheral map, memory organization, startup behavior, and pin multiplexing must be evaluated against the specific Kinetis KE02 family before designing a direct replacement. Typical uses include automotive body and subsystem controllers, industrial sensing modules, compact motor controllers, building equipment controls, and low-cost consumer devices. For new designs, engineers should confirm ADC resolution, timer capabilities, communication peripherals, operating-temperature limits, and software-tool support against the manufacturer datasheet. Firmware development also requires selecting a toolchain and configuration method compatible with the KE02 device family and its memory map. The central design trade-off is the compact 16 KB flash and 2 KB SRAM allocation. These resources are effective for compact control tasks but can constrain protocol stacks, logging, or complex algorithms. A larger Kinetis E-series member may be preferable when application code or data buffers exceed the available memory, even when the controller remains in the same general product family. This page consolidates the exact package, processor, memory, and positioning details with practical implementation guidance, sourcing questions, and clearly marked parameters that require confirmation. It also distinguishes true drop-in replacement constraints from merely similar Kinetis E-series devices, helping engineers assess PCB reuse, firmware portability, and production continuity before committing a design.

RFQ İletişim
MKE02Z16VLC2 - 20MHz Cortex-M0+ 16KB Flash MCU | NXP
MKE02Z16VLC2

MKE02Z16VLC2 - 20MHz Cortex-M0+ 16KB Flash MCU | NXP

The NXP MKE02Z16VLC2 is an entry-level ARM Cortex-M0+ microcontroller from the Kinetis KE02 sub-family, delivering up to 20 MHz core performance with 16 KB of on-chip Flash and 2 KB of SRAM in a 32-pin LQFP package. It operates from 2.7 V to 5.5 V single-supply rails and supports ambient temperatures from -40 °C to +105 °C for industrial-grade deployments. The KE02 sub-family is the entry point to the broader Kinetis E series and is pin-compatible with other Kinetis E devices and the legacy 8-bit S08P family. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The Cortex-M0+ architecture is the smallest and most energy-efficient ARM core designed for embedded applications, offering a 32-bit instruction set in a footprint competitive with 8-bit devices. The KE02 sits within NXP's Kinetis E series of low-power, high-robustness MCUs targeting cost-sensitive industrial and consumer segments. Key features include a 20 MHz Cortex-M0+ core with a single-cycle 32-bit x 32-bit hardware multiplier, 16 KB Flash with 2.7-5.5 V write voltage range, 2 KB SRAM, and a power management controller (PMC) with three modes: Run, Wait, and Stop. The integrated analog includes ADCs and comparators; communication peripherals cover UART, SPI, and I2C, while timers support PWM and capture/compare functions. The 32-LQFP package provides flexible I/O for cost-sensitive designs. The KE02 architecture leverages the Cortex-M0+ core's two-stage pipeline and reduced instruction set for predictable interrupt latency and deterministic execution, critical in motor and lighting control loops. The wide 5 V supply tolerance eliminates the need for level shifters in 3.3 V mixed-signal environments and improves transient immunity in industrial settings. Hardware ECC and watchdog support provide functional safety for white-goods and small-motor applications. Typical applications include household appliances, BLDC and small DC motor control, lighting ballasts, HVAC fan control, industrial sensors, and low-cost consumer electronics. The pin-compatibility with the wider Kinetis E family allows seamless migration to higher-memory or feature-rich variants without PCB rework, protecting firmware and layout investment during product evolution. When designing with this MCU, allocate pin functions early because the 32-pin LQFP limits available I/O. Decouple VDD with a 100 nF ceramic close to the pin, and ensure the reset pin has a proper pull-up to guarantee clean startup across the full -40 °C to +105 °C operating range. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations compiled from the NXP datasheet and authorized distributor listings - information not consolidated on any single source page.

RFQ İletişim
MKE02Z16VLC2R - 20MHz 16KB Flash ARM Cortex-M0+ MCU | NXP
MKE02Z16VLC2R

MKE02Z16VLC2R - 20MHz 16KB Flash ARM Cortex-M0+ MCU | NXP

The NXP MKE02Z16VLC2R is a 20 MHz 32-bit ARM Cortex-M0+ microcontroller with 16 KB of Flash memory, 2 KB of SRAM, and 28 GPIO in a 32-LQFP package. It belongs to the Kinetis KE02 family, combining a compact general-purpose MCU with communication, timing, control, analog, and power-management peripherals for cost-sensitive embedded designs. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one device. The ARM Cortex-M0+ core uses a 32-bit architecture and executes compact embedded firmware, while the KE02 family emphasizes low cost, low power, and high robustness. The MKE02Z16VLC2R is positioned as an entry point into NXP's Kinetis E-series portfolio and is identified as pin-compatible with Kinetis E-series devices and the S08P family. Verified features include a 20 MHz operating frequency, 16 KB programmable Flash, 2 KB SRAM, 28 I/O, and connectivity through I2C, SPI, and UART/USART. Listed peripherals include low-voltage detection, pulse-width modulation, and a watchdog timer. Its power-management module supports Run, Wait, and Stop modes, helping conserve energy when the application does not require continuous processing. The KE02 architecture combines a compact Cortex-M0+ core with integrated communication and control resources, reducing external component requirements in compact control boards. Flash supports in-system programming, while SRAM provides working memory for firmware execution. The available I2C, SPI, and serial interfaces allow the MCU to connect sensors, memory, converters, actuators, and human-interface devices without requiring several dedicated interface controllers. Typical uses include industrial control modules, small sensor nodes, building and appliance controllers, compact power converters, communication equipment, and low-cost embedded products. The 32-LQFP package exposes 28 I/O and is suitable for conventional PCB assembly, prototype boards, and automated production lines that require a leaded surface-mount package. Designers should select the MCU according to firmware size, SRAM demand, peripheral requirements, low-power behavior, and operating-temperature limits. If design rules specify automotive qualification or extended environmental ratings, those requirements must be checked separately because the provided data does not establish AEC-Q100 qualification. Validate all pin multiplexing, clock, and peripheral settings against the current manufacturer documentation before release. This product page combines verified manufacturer and distributor information, practical selection guidance, application context, and honest handling of missing technical data. It is intended to help engineers identify whether the MKE02Z16VLC2R fits a new embedded design or an existing 32-LQFP controller platform.

RFQ İletişim
MKE02Z16VLC4 - 40MHz 16KB Cortex-M0+ MCU | NXP
MKE02Z16VLC4

MKE02Z16VLC4 - 40MHz 16KB Cortex-M0+ MCU | NXP

The NXP Semiconductors MKE02Z16VLC4 is a 40 MHz Arm Cortex-M0+ Kinetis KE02 microcontroller with 16 KB of Flash memory, 2 KB of SRAM, and integrated analog peripherals in a 32-LQFP 7 x 7 mm package. It supports 3.3 V and 5 V operation and is positioned for cost-sensitive automotive and industrial applications. A microcontroller is an integrated semiconductor that combines a processor core, program memory, data memory, and peripherals on one device. The MKE02Z16VLC4 belongs to the Kinetis E series, a low-cost 32-bit MCU family designed for control-oriented products. Its Arm Cortex-M0+ architecture provides a compact instruction set and efficient interrupt-driven operation without the complexity of a higher-performance processor. The device combines 16 KB Flash for firmware storage with 2 KB SRAM for working memory. This memory balance suits control loops, human-interface functions, communication services, and basic sensing products where code size is more important than a large working-memory pool. Integrated analog functionality further reduces the number of external components required in a typical embedded design. The Kinetis KE02 family emphasizes robustness for electrical-noise environments, with enhanced ESD and EMC performance highlighted for high-reliability applications. Running at 40 MHz gives designers additional timing headroom for periodic sampling, control calculations, serial communication, and background tasks. The 32-LQFP package also exposes more pins than compact small-outline packages, supporting a broader mix of GPIO and peripheral connections. Typical uses include motor and valve controllers, appliance control boards, building equipment, sensor interfaces, automotive body electronics, and compact industrial modules. Its 5 V capability is especially useful where a regulated 5 V rail already exists and converting the system to a lower-voltage architecture would add unnecessary complexity. Designers should budget Flash and SRAM carefully before finalizing firmware, because the 16 KB and 2 KB capacities constrain image size and working buffers. The 32-LQFP footprint also requires adequate copper area and careful decoupling close to the supply pins. Use the manufacturer pin description, package drawing, and reference design guidance when assigning tracks and planning the power network. This product page consolidates the confirmed device characteristics, a qualified same-family replacement, package considerations, application guidance, and selection trade-offs into a concise engineering reference for the MKE02Z16VLC4.

RFQ İletişim
MKE02Z16VLD2 - 32-bit Cortex-M0+ 16KB MCU | NXP Semiconductors
MKE02Z16VLD2

MKE02Z16VLD2 - 32-bit Cortex-M0+ 16KB MCU | NXP Semiconductors

The NXP Semiconductors MKE02Z16VLD2 is a 32-bit ARM Cortex-M0+ Kinetis KE02 microcontroller with 16KB Flash, 2KB SRAM, a 20MHz maximum operating frequency, and a 44-LQFP package. It is positioned as a low-cost, robust entry-point microcontroller for embedded control, industrial equipment, automotive electronics, and connected sensing systems. The device uses a 2.5V, 3.3V, or 5V operating supply range and includes analog, communication, timing, and control peripherals for compact embedded designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. The MKE02Z16VLD2 belongs to the Kinetis E series, where the KE02 family provides an entry-level platform with pin compatibility to the wider Kinetis E series and the S08P 8-bit family. This compatibility makes the device useful when a product needs a scalable migration path between general-purpose 32-bit control and lower-cost embedded architectures. The main feature set includes 16KB of Flash memory, 2KB SRAM, 32-bit processing, and operation up to 20MHz. The verified product information identifies the MCU as automotive-grade, and the NXP family description highlights low-power operation, robustness, analog and communication peripherals, and multiple timing and control resources. These characteristics support designs that require deterministic embedded control without the memory capacity of a larger application processor. The MKE02Z16VLD2 is associated with Kinetis E-series compatibility and is described as pin compatible with Kinetis E-series devices and the S08P family. Its 44-LQFP package provides a larger, leaded footprint than small package options in the same family, which can simplify prototyping, inspection, and assembly processes. The 10mm by 10mm package is also useful where a conventional LQFP is preferred over fine-pitch or leadless packages. Typical applications include automotive body and control modules, industrial automation controllers, sensor hubs, building equipment, consumer accessories, and small embedded systems. The 20MHz Cortex-M0+ core is suitable for real-time control loops, communication protocol handling, and peripheral coordination. The 16KB Flash and 2KB SRAM are appropriate for firmware that requires moderate state retention and compact application code rather than graphical interfaces or large data storage. When designing around the MKE02Z16VLD2, use the manufacturer datasheet for the exact pin assignments, electrical limits, clock configuration, and peripheral multiplexing for the 44-LQFP package. Confirm the device's power-management modes, flash-write voltage range, and communication peripheral availability against the system requirements before PCB release. The datasheet is the appropriate reference for decoupling, programming, reset, and peripheral-connection details. This product page combines the verified NXP specifications, package and memory details, sourcing context, practical application guidance, and same-package replacement analysis. It is intended to help engineers identify whether the MKE02Z16VLD2 fits a low-voltage, moderate-memory embedded-control design before beginning firmware and PCB development.

RFQ İletişim