Ürünler (46.000+)

XC3S50A-4VQG100I - Spartan-3A 68-I/O FPGA | AMD
XC3S50A-4VQG100I

XC3S50A-4VQG100I - Spartan-3A 68-I/O FPGA | AMD

The AMD XC3S50A-4VQG100I is a Spartan-3A field-programmable gate array with 1,584 configurable logic cells, 68 user I/O pins, a 1.2 V core supply, and a 100-pin TQFP package. The device is specified for an industrial temperature range of -40°C to +100°C, making it suitable for temperature-stable programmable control, signal conditioning, interface bridging, and embedded data-processing systems. A field-programmable gate array is a digital semiconductor whose configurable logic, interconnect, and I/O resources can be programmed after manufacture. The Spartan-3A family belongs to the FPGA and CPLD product hierarchy and combines programmable logic density with a relatively large I/O count. This balance allows one package to implement control logic, protocol interfaces, data acquisition functions, and peripheral connectivity without requiring a separate microcontroller for every task. The XC3S50A-4VQG100I provides approximately 50,000 logic gates, 68 user I/O pins, 1,584 logic cells, and a 1.2 V core. Its -4 designation identifies the device speed grade, while the industrial suffix supports operation from -40°C to +100°C. The 100-pin TQFP package also exposes more I/O than smaller FPGA packages and remains practical for conventional board assembly. Exact RAM, block-RAM, clock, and I/O voltage details should be confirmed in the manufacturer datasheet before final design release. The Spartan-3A architecture is useful when a design requires deterministic parallel logic, flexible pin assignment, and firmware-controlled reconfiguration. Typical implementation patterns include I/O-intensive industrial controllers, data-acquisition front ends, communication protocol converters, motion-control sequencing, and display-interface logic. Parallel processing and dedicated I/O access can reduce the need for external glue logic while preserving a compact embedded footprint. A key design consideration is power and timing. The 1.2 V core rail must be generated cleanly and decoupled close to the device, while every external I/O voltage must satisfy the selected bank's voltage limits. Designers should also use the exact Spartan-3A pin table when assigning balls or pins, account for configuration and startup behavior, and validate timing with the appropriate Xilinx development tools for the installed device and speed grade. This page combines the exact device characteristics with package-specific guidance, practical application fit, comparison criteria, and engineering-oriented replacement notes. These details help engineers distinguish direct package-compatible options from alternatives that may require a different footprint, speed grade, temperature grade, or FPGA architecture.

RFQ İletişim
XC3S50AN-4FT256C - 50K Spartan-3AN FPGA | AMD
XC3S50AN-4FT256C

XC3S50AN-4FT256C - 50K Spartan-3AN FPGA | AMD

AMD XC3S50AN-4FT256C is a Spartan-3AN field-programmable gate array with 50,000 equivalent logic gates, 1,584 logic cells, 176 configurable logic blocks, 195 I/O, and a maximum clock frequency of 667 MHz. The device is supplied in a 256-ball grid array package and uses a 1.2 V core supply. Its combination of parallel programmable logic, dedicated digital signal processing resources, and embedded-memory capability makes it suitable for embedded signal-processing, communications, control, and industrial interface systems. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy: programmable logic device, configurable logic device, FPGA, and semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA permits design changes, parallel processing, and hardware adaptation without changing the printed circuit board. The Spartan-3AN family combines configurable logic blocks, dedicated block RAM, and DSP resources in a programmable SoC-oriented architecture. Key device characteristics include 55,296 combinational gates, 1,584 configurable logic cells, 176 configurable logic blocks, 195 user I/O, and a listed maximum operating frequency of 667 MHz. The 90 nm fabrication process and 1.2 V core supply place the device in the classic low-power Spartan architecture. Its large BGA package also provides many signal connections for high-pin-count designs, although the dense ball grid requires careful escape-routing and assembly planning. The Spartan-3AN architecture supports parallel datapath implementation because multiple configurable logic blocks and dedicated arithmetic resources can operate concurrently. This is valuable for filters, fixed-point transforms, serial interfaces, and control logic that would require multiple conventional components in a fixed implementation. Designers can partition a system among lookup tables, flip-flops, block RAM, DSP arithmetic, dedicated I/O, and general-purpose I/O, then validate timing through the Spartan-3 FPGA design flow. Typical uses include industrial automation, data acquisition, instrumentation, communications infrastructure, embedded control, and digital signal-processing subsystems. The 195 I/O count supports multi-channel data collection and external interfaces, while the 667 MHz listed clock rate provides a high-speed fabric for pipelined processing. For designs requiring secure remote updates, embedded memory, or asynchronous serial configuration, the family-level Spartan-3AN features should be checked against the exact configuration and memory requirements. Board design requires careful attention to the 256-BGA footprint, multilayer PCB construction, via-in-pad and solder-mask practices where appropriate, and decoupling of the 1.2 V core and I/O supplies. Maintain the voltage and decoupling recommendations in the AMD Spartan-3AN family data sheet, and verify the pinout against the selected 256-ball package drawing rather than relying on family-level diagrams. This product record combines the exact ordering code, package information, Spartan-3AN resource figures, configuration references, and practical replacement guidance. It is intended to help engineers confirm footprint compatibility, evaluate known same-family alternatives, and plan an FPGA migration without overlooking bitstream, timing, assembly, or tool-chain consequences.

RFQ İletişim
XC3S50AN-4FT256I - 1584 Logic Cells Spartan-3AN | AMD
XC3S50AN-4FT256I

XC3S50AN-4FT256I - 1584 Logic Cells Spartan-3AN | AMD

The AMD XC3S50AN-4FT256I is a Spartan-3AN field-programmable gate array with 1,584 logic elements, 55,296 RAM bits, and 195 programmable I/O pins, packaged in a 256-ball LBGA. It uses 90 nm fabrication technology, has a 1.2 V core supply, and supports operation across an industrial junction-temperature range of -40°C to +100°C. The device is identified as a four-speed-grade variant in a 256-ball surface-mount package. A field-programmable gate array, or FPGA, is a programmable semiconductor whose configurable logic blocks, block RAM, programmable input/output resources, and dedicated hardware blocks can be assembled into application-specific digital circuits. FPGAs sit between fixed-function logic devices and software processors within the broader semiconductor hierarchy. They are useful when a design needs parallel processing, deterministic hardware response, flexible interface support, or field updates without changing the printed circuit board. The XC3S50AN provides 176 configurable logic blocks, 1,584 logic cells, and 55,296 bits of block RAM. Its 195 programmable I/O pins support connections to external memories, processors, sensors, communications circuits, and industrial control peripherals. The four speed designation supports designs that require more timing margin than a lower-speed grade, while the industrial temperature suffix identifies its intended -40°C to +100°C junction-temperature operating class. This Spartan-3AN device uses a 90 nm FPGA process and a 1.2 V core supply. These characteristics place it among Xilinx and AMD’s low-density Spartan devices, where configuration flexibility is balanced against relatively modest logic capacity. Design teams should evaluate the available logic, RAM, and I/O resources against the target design rather than relying on nominal gate counts alone. Typical applications include industrial control, data acquisition, embedded communications, instrumentation, embedded processing, and low-density interface or control logic. The 195 available I/O pins are especially useful when the board must connect directly to multiple sensors, memory devices, transceivers, or mixed-signal peripheral circuits while preserving programmable logic for timing and control functions. Use the manufacturer pinout and configuration guidance when assigning the 256-ball footprint. Confirm every power, ground, configuration, clock, and user-I/O connection against DS557, and budget startup configuration time and core supply requirements in the system power sequence. The legacy device also requires an appropriate Xilinx development environment and device support for implementation, simulation, and programming. This page combines device specifications, verified package details, application guidance, replacement analysis, and practical implementation considerations in one engineering-focused reference. It is intended to help designers assess logic capacity, timing class, thermal range, package compatibility, tool-chain availability, and sourcing constraints before integrating the FPGA into a new or existing platform.

RFQ İletişim
XC3S50AN-4TQ144I - 50K Spartan-3AN FPGA | Xilinx
XC3S50AN-4TQ144I

XC3S50AN-4TQ144I - 50K Spartan-3AN FPGA | Xilinx

The Xilinx XC3S50AN-4TQ144I is a Spartan-3AN field-programmable gate array with 55,296 RAM bits, 1,584 logic elements, and 108 user I/O pins in a 144-pin TQFP package. It uses 90 nm fabrication technology, operates from a 1.2 V core supply, and is rated for an industrial junction-temperature range of -40°C to 100°C. The -4 speed grade and industrial-temperature designation make it suitable for embedded control, communications, industrial automation, and compact digital signal-processing systems requiring reconfigurable logic. A field-programmable gate array, or FPGA, is a programmable digital semiconductor containing configurable logic blocks, programmable I/O, and embedded memory. Within the device hierarchy, the XC3S50AN-4TQ144I is a Spartan-3AN FPGA, a member of the Xilinx Spartan-3 family. Unlike a fixed-function application-specific integrated circuit, an FPGA can be programmed after manufacture to implement parallel processing, control logic, serial interfaces, protocol handling, or other system-specific functions. Principal features include 176 logic array blocks, 1,584 configurable logic elements, 55,296 bits of block RAM, and 108 user I/O pins. The -4 designation identifies the device speed grade, while the industrial suffix supports operation across a -40°C to 100°C junction-temperature range. The Spartan-3AN architecture also supports non-volatile configuration and data-storage capabilities, distinguishing it from the related Spartan-3A family. The 144-pin TQFP package exposes the device's programmable I/O and supply connections on a surface-mount PCB footprint. Its 108 user I/O count provides substantial parallel connectivity for external memories, data converters, communication transceivers, and general control peripherals. Designers should still confirm the exact I/O standard, pin assignment, and configuration requirements against the package-specific pinout before routing a new PCB. Typical applications include industrial control systems, data-acquisition equipment, embedded communications, instrumentation, video processing, and low-cost FPGA prototyping. The device is especially useful where logic parallelism or field reconfiguration provides more flexibility than a fixed microcontroller or application-specific controller. A key design consideration is that pin-compatible alternatives can differ in temperature grade, speed grade, embedded flash, and configuration behavior. Validate the complete ordering code, supported I/O standards, configuration memory interface, and power architecture before approving a replacement. This page combines package-aware alternatives, engineering guidance, and application analysis to support that decision. For this Spartan-3AN FPGA, the main design task is balancing flexible programmable logic against board-level requirements. The 50K-density device offers 1,584 logic elements and 108 user I/O pins, providing enough parallel resources for compact embedded systems without requiring a larger FPGA package. Its 90 nm process and 1.2 V core supply also require careful attention to bypass capacitance, signal integrity, thermal margins, and configuration startup behavior. Engineers should use the manufacturer datasheet and package pin table as the authority for final connectivity, supported voltage standards, and power sequencing.

RFQ İletişim
XC3S50AN-4TQG144C - Spartan-3AN FPGA, 144-LQFP | AMD
XC3S50AN-4TQG144C

XC3S50AN-4TQG144C - Spartan-3AN FPGA, 144-LQFP | AMD

The AMD/Xilinx XC3S50AN-4TQG144C is a Spartan-3AN field-programmable gate array in a 144-pin LQFP package, combining 55,296 system gates, 1,584 Kbit of block RAM, and 108 user I/O in a cost-sensitive embedded design. The -4 speed grade supports designs requiring predictable timing performance across commercial-temperature industrial and consumer equipment. A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, block RAM, programmable input/output, and dedicated clocking resources implement digital systems that would otherwise require multiple programmable or fixed-function devices. Within the product hierarchy, an FPGA contains lookup tables, flip-flops, dedicated block RAM, digital clock managers, and general-purpose I/O blocks. The Spartan-3AN family combines FPGA logic with on-chip configuration flash for nonvolatile configuration and data-storage applications. Key resources include 55,296 system gates, 1,584 Kbit of block RAM, and 108 user I/O. The TQG144 designation identifies the leaded 144-pin package, while the trailing C identifies the commercial product grade. Its 144-pin LQFP footprint supports board-level assembly and inspection processes that are common in mixed-signal and control-system hardware. Programmable I/O supports multiple voltage standards and interfaces according to the device configuration. The Spartan-3AN architecture combines configurable logic with dedicated memory and nonvolatile configuration flash. Designers can implement parallel datapaths, control state machines, communication interfaces, and data buffering without external logic devices. Because configuration data can be stored in the on-chip flash, the FPGA can retain its programmed configuration when power is removed, a useful characteristic for appliance controllers, industrial controls, and embedded equipment that must resume operation after power interruption. Typical applications include industrial automation controllers, data-acquisition and instrumentation systems, industrial networking equipment, embedded video-processing front ends, and consumer or communications products with parallel bus interfaces. The 108 available I/O allow dedicated connections to external data converters, memory devices, transceivers, and control logic while retaining package-level integration on a single board. When laying out a board, treat the 144-pin LQFP footprint and its thermal performance as primary constraints. Follow the AMD Spartan-3AN pinout and configuration guidance for every power, ground, clock, configuration, and user-I/O connection. Validate the selected I/O standard, voltage, and drive configuration against the attached circuitry, and review the complete AMD Spartan-3AN Family Data Sheet before releasing the PCB layout. This page consolidates device resources, package details, drop-in ordering alternatives, comparison parameters, and practical design guidance for engineers evaluating the XC3S50AN-4TQG144C in a new programmable-logic design.

RFQ İletişim
XC3S50AN-4TQG144I - 50K Spartan-3AN FPGA | AMD
XC3S50AN-4TQG144I

XC3S50AN-4TQG144I - 50K Spartan-3AN FPGA | AMD

The AMD XC3S50AN-4TQG144I is a Spartan-3AN field-programmable gate array with 1,584 configurable logic elements, 55,296 RAM bits, and 108 user I/O pins, offered in a 144-lead TQFP package. The device operates from a single 3.3 V supply and is specified for an industrial junction-temperature range of -40°C to +100°C. An FPGA is a programmable digital semiconductor whose logic, interconnect, memory, and I/O resources can be configured after manufacture. It belongs to the FPGA hierarchy, where programmable logic provides an alternative to fixed-function logic ICs, gate arrays, and application-specific controllers. The Spartan-3AN family combines configurable logic with non-volatile configuration flash and user data storage, allowing designs to retain their programmed configuration without a separate configuration PROM. Principal resources include 176 logic array blocks organized into 1,584 configurable logic blocks, 55,296 RAM bits, and 108 user I/O pins. The listed 667 MHz device figure represents a maximum internal timing benchmark rather than a guarantee of every routed interface frequency. The -4 speed designation identifies the performance grade, while the I suffix denotes the industrial-temperature option. Pb-free package construction is indicated by the G character in the ordering code. The device supports parallel and serial configuration paths, including SelectMAP, SPI, and platform flash programming methods described for the Spartan-3AN family. Configuration data can also be loaded through supported serial modes, which is useful when board space is constrained. Because the Spartan-3AN architecture includes non-volatile flash, designs can preserve configuration and non-volatile data between power cycles without relying exclusively on an external configuration memory device. Typical uses include industrial control, communications equipment, instrumentation, embedded display systems, and compact data-acquisition products. Its 108 user I/O pins suit designs requiring numerous parallel digital connections, while the 50,000-gate-class logic capacity is appropriate for moderate control logic, protocol interfaces, and modest parallel processing pipelines. A larger FPGA is generally unnecessary when the design fits within 1,584 logic cells and the available I/O budget. PCB design should follow the AMD DS557 pinout and package recommendations, including decoupling, configuration-interface routing, and unused-pin treatment. The 144-pin TQFP footprint is easy to inspect after assembly, but its fine lead pitch makes careful footprint inspection, solder-paste control, and thermal-cone design important. Validate the assembled board before programming a production configuration. This page combines device resources, verified package and ordering details, configuration guidance, and drop-in comparison options to support faster engineering selection. It also highlights where temperature grade, suffix, configuration method, and package construction affect replacement decisions.

RFQ İletişim
XC3S50AN-5FT256C 50K Spartan-3AN FPGA | AMD Xilinx
XC3S50AN-5FT256C

XC3S50AN-5FT256C 50K Spartan-3AN FPGA | AMD Xilinx

AMD Xilinx XC3S50AN-5FT256C is a Spartan-3AN field-programmable gate array built for compact, logic-intensive embedded systems. The device provides 1,584 logic cells organized into 176 configurable logic blocks, 55,296 bits of block RAM, and 195 user I/O in a 256-LBGA package. Its -5 speed grade supports design-dependent timing performance up to 667 MHz under the stated device conditions. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic, memory, and I/O in one device. FPGAs sit within programmable logic devices and broader semiconductor systems, allowing designers to implement parallel datapaths, control logic, interface bridges, and signal processing without relying on a fixed application-specific integrated circuit. The Spartan-3AN family combines this flexibility with low-power 90 nm fabrication. Important device characteristics include 1,584 logic cells, 176 CLBs, 55,296 bits of RAM, and 195 user I/O. The 17 mm by 17 mm surface-mount package also supports multiple configuration methods identified for the family, including serial and parallel configuration interfaces. These resources make the XC3S50AN suitable for embedded control, industrial automation, communications, and instrumentation systems where parallel logic can simplify an implementation. The -5 designation identifies a faster device grade than the -4 options commonly encountered in the Spartan-3AN family. This grade is useful when system timing requires additional performance margin, although final timing closure still depends on the selected I/O standards, clocking architecture, routing demand, and design complexity. The 90 nm process technology and 1.2 V core supply reflect the architecture's focus on low-power programmable logic rather than very high-performance logic density. Typical applications include industrial sensor and motion-control nodes, programmable logic controllers, communications gateways, instrument controllers, embedded test systems, and low-power edge-processing modules. Its 195 I/O count is particularly useful when a design must combine multiple buses, status indicators, serial links, and control outputs without using several companion logic devices. PCB implementation requires careful ball-grid-array layout and power planning. Place all required decoupling capacitors close to the associated supply balls, provide a clean ground reference, and route sensitive clock and configuration signals away from high-current switching nodes. Confirm the selected package land pattern, voltage rails, configuration interface, and I/O standards against the AMD Spartan-3AN documentation before releasing the PCB. This product page combines package, resource, I/O, and cross-reference information with same-footprint alternatives and practical design guidance. It supports engineers comparing FPGA capacity, speed grade, package compatibility, legacy-tool constraints, and migration risk before selecting a production device.

RFQ İletişim
XC3S700A-4FG400C 700K FPGA, 311 I/O, 400-BGA | Xilinx
XC3S700A-4FG400C

XC3S700A-4FG400C 700K FPGA, 311 I/O, 400-BGA | Xilinx

The Xilinx XC3S700A-4FG400C is a Spartan-3A field-programmable gate array with approximately 700,000 system gates, 13,248 configurable logic cells, 311 I/O sites, and a 400-ball S-PBGA package measuring 21 mm by 21 mm. It operates from a 1.14 V minimum supply to a 1.26 V maximum supply, with a -4 speed grade and a commercial temperature range of 0°C to 85°C. An FPGA is a semiconductor whose digital logic, interconnect, and I/O can be configured after manufacture. Within the product hierarchy, the XC3S700A-4FG400C is a programmable logic device, then an FPGA, then a general-purpose semiconductor used for parallel processing, control, interface bridging, and embedded signal processing. The Spartan-3A family targets cost-sensitive applications requiring more capability than small CPLDs while avoiding the resource level of the largest FPGAs. Key features include approximately 700,000 system gates, 13,248 logic cells, 311 I/O, and up to 45 KB of block RAM according to the family datasheet information. The device is manufactured using a 90 nm process and uses a 1.2 V core supply. Its -4 designation identifies a performance grade, while the commercial-temperature suffix supports designs operating between 0°C and 85°C. The package provides 400 surface-mount balls arranged for high-density board integration. The Spartan-3A architecture combines programmable logic, dedicated arithmetic resources, block memory, programmable I/O, and dedicated configuration functions. With 667 MHz reported for the target device and 250 MHz cited in a summarized family specification, timing design must follow the speed-grade-specific AC and DC limits in AMD datasheet DS529. The 400-BGA footprint also requires careful via-in-pad, solder-mask, thermal, and signal-integrity planning during PCB layout. Typical applications include industrial control, networked communications equipment, video and image processing, consumer peripherals, and cost-sensitive embedded systems. The 311 I/O sites make the device useful for parallel interfaces and substantial external bus connectivity, while the integrated DSP and memory resources can reduce the need for external components. Designs must also account for configuration storage, clocking, decoupling, and JTAG programming requirements. The primary design trade-off is fixed legacy-device availability rather than raw logic capacity. Because the Spartan-3A family is an established platform, engineers should validate I/O standards, timing, tooling support, and PCB footprint compatibility before committing a new production design. Use AMD DS529 for the authoritative family pinout, package information, electrical characteristics, and configuration guidance. This product record combines the device specifications, package constraints, lifecycle considerations, drop-in comparisons, and practical PCB guidance into an engineering-focused reference. It also highlights the need to verify toolchain availability and current sourcing status before starting a design, particularly where long-lived industrial or aerospace programs depend on exact device continuity.

RFQ İletişim
XC3S700A-4FG400I - 400-BGA Spartan-3A FPGA | AMD
XC3S700A-4FG400I

XC3S700A-4FG400I - 400-BGA Spartan-3A FPGA | AMD

The AMD XC3S700A-4FG400I is a Spartan-3A field-programmable gate array in a 400-ball grid-array package, with 13,248 logic cells, 311 user I/O, and 368,640 bits of configuration memory. The -4 speed designation identifies its performance grade, while the industrial I suffix denotes the specified operating-temperature class. The device is suitable for programmable control, interface, signal-processing, and embedded-system applications requiring substantially more I/O than small CPLDs provide. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs and ASICs, offering high parallelism and reconfigurable hardware. Unlike a fixed-function microcontroller, the XC3S700A-4FG400I can implement multiple independent logic paths, state machines, interfaces, and control functions in one configurable device. The Spartan-3A architecture provides 13,248 logic cells and 311 user I/O in the specified 400-BGA configuration. Its 368,640-bit configuration memory supports the programmed logic and routing network. The high I/O count is especially valuable for industrial controllers, communications interfaces, test equipment, and embedded systems that connect multiple sensors, converters, transceivers, and peripheral devices. According to the manufacturer datasheet DS529-1 (v2.0), the Spartan-3A family supports multiple package options and device configurations. The exact XC3S700A-4FG400I ordering code combines the XC3S700A device, -4 performance grade, FG400 package designation, and industrial-temperature suffix. Package construction, pin definitions, supported I/O standards, and configuration requirements must be implemented from the manufacturer pinout and package tables. Typical implementations include industrial automation, data acquisition, communications, embedded control, instrumentation, and general-purpose digital prototyping. The 311 available user I/O allow a single FPGA to bridge sensors and actuators while executing parallel control logic. Legacy designs may require the mature Spartan-3A tool flow, configuration memory interface, clocking architecture, and level-shifting considerations for modern mixed-signal systems. For new layouts, route configuration, dedicated pins, power, ground, and differential or high-speed interfaces according to the manufacturer package guidelines. Preserve the recommended decoupling and configuration startup behavior. Because this device is obsolete, verify the programmed bitstream, I/O standards, and timing against the archived design files before committing to a production replacement. This product record combines the device architecture, verified package and resource data, lifecycle information, pin-compatible family alternatives, and application-oriented design guidance. It supports engineers comparing the XC3S700A-4FG400I with other Spartan-3A speed grades and package variants while preserving the existing 400-BGA board footprint.

RFQ İletişim
XC3S700A-4FG484C - 13,248-Cell Spartan-3A FPGA | AMD
XC3S700A-4FG484C

XC3S700A-4FG484C - 13,248-Cell Spartan-3A FPGA | AMD

AMD XC3S700A-4FG484C is a Spartan-3A field-programmable gate array with 13,248 logic cells, 372 user I/O pins, and 368,640 bits of block RAM in a 484-FBGA surface-mount package. The device uses the -4 speed grade and a commercial junction-temperature range of 0°C to 85°C. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after fabrication. Within the broader hierarchy, an FPGA is a programmable-logic device and a user-programmable semiconductor. It replaces many application-specific ASIC functions when a design must be revised, expanded, or produced in relatively low volumes without changing the physical circuit design. The XC3S700A belongs to the Spartan-3A family and combines configurable logic blocks, dedicated block RAM, programmable I/O, and clocking resources. Its 13,248 logic cells provide substantial parallel-processing capacity for embedded control, data acquisition, communications, and industrial interface designs. The 372 user I/O pins support broad external connectivity, while 368,640 bits of block RAM support buffering, packet storage, data formatting, and state-holding functions. The -4 designation identifies the device's performance class within the Spartan-3A family. The FG484 package is a 23 mm × 23 mm FBGA intended for surface-mount assembly and provides the pin count required for designs exposing many external signals. Configuration data determines the implemented logic at startup, allowing the same physical device to support multiple firmware-defined functions. Typical applications include industrial automation controllers, data-acquisition systems, communications equipment, embedded video processing, consumer electronics, and automotive or telecommunications control modules. The large I/O count is particularly useful when a design combines parallel sensors, external memories, converters, communication transceivers, and high-speed digital interfaces on one programmable board. Designers should validate signal integrity at each interface, preserve the required configuration sequence, and use the manufacturer pinout and PCB guidelines for the 484-FBGA footprint. Power, clock, decoupling, and termination decisions must be checked against the selected I/O standards and the -4 timing constraints before release to production. This page combines the device's core resource figures, package details, lifecycle considerations, drop-in family options, and application guidance to support faster engineering selection. The AMD/Xilinx Spartan-3A family data sheet DS529 remains the primary technical reference for architecture, electrical characteristics, pin assignments, and package implementation.

RFQ İletişim
XC3S700A-4FG484I - 700K Gate Spartan-3A FPGA | AMD
XC3S700A-4FG484I

XC3S700A-4FG484I - 700K Gate Spartan-3A FPGA | AMD

The AMD XC3S700A-4FG484I is a Spartan-3A field-programmable gate array with 700,000 logic gates, 13,248 logic cells, 372 user I/Os, and a 484-pin FBGA package. It uses 90 nm CMOS technology, operates from a 1.2 V core supply, and is listed with a maximum performance frequency of 667 MHz. The device provides the logic density and pin count required for embedded control, communications, signal processing, and industrial interface designs. A field-programmable gate array is a programmable semiconductor that combines configurable logic blocks, programmable interconnect, and input/output resources into one device. In the product hierarchy, an FPGA is a programmable-logic IC, while the Spartan-3A family occupies the cost-sensitive, low-to-medium-density segment. Instead of implementing a fixed digital function in mask-programmed silicon, engineers define the logic and signal routing in a hardware description and configure the FPGA after manufacture. The XC3S700A-4FG484I combines 700,000 gates with 372 user I/Os in a 23 x 23 mm FBGA-484 package. Its 13,248-cell architecture can support parallel datapaths, protocol bridges, control logic, and embedded state machines. The -4 speed designation identifies the device performance grade, while the 484-ball package supports dense board-level integration without relying on a large leaded package. The device is built on 90 nm CMOS technology and uses a 1.2 V core supply, making it appropriate for designs that need substantial programmable logic without the power and complexity of a larger FPGA. Its 667 MHz listed maximum frequency provides a useful timing target for synchronous control, clocked data paths, and communication interfaces. Exact timing closure remains design- and tool-dependent because external memory interfaces, I/O timing, and routing can alter the achievable clock. Typical uses include industrial networking equipment, programmable control systems, communications gateways, sensor aggregation, and embedded instrumentation. The 372 I/O count is especially useful when a design must connect multiple buses, capture parallel data, or bridge processors and peripherals. A single FPGA can consolidate control logic and interface adaptation without requiring several separate programmable devices. PCB implementation should follow the AMD package pinout and recommended power, decoupling, and thermal-layout guidance. The 484-ball FBGA requires careful escape routing, multiple power planes, and plane-via distribution to control impedance and return current. Designers should also budget device configuration time and verify that the selected bitstream, clocking architecture, and I/O standards are supported by the implementation flow. This product page combines the device specifications, manufacturer family documentation, package details, practical design considerations, and verified drop-in candidates. It also distinguishes ordering and temperature-grade suffixes so engineers can identify a direct replacement without assuming that a different commercial-grade or speed-grade variant is electrically identical.

RFQ İletişim
XC4VFX100-10FFG1152C - 94,896-Cell FPGA | Xilinx | Industrial
XC4VFX100-10FFG1152C

XC4VFX100-10FFG1152C - 94,896-Cell FPGA | Xilinx | Industrial

The Xilinx, Inc. XC4VFX100-10FFG1152C is a Virtex-4 FX field-programmable gate array with 94,896 logic cells, 576 user I/Os and a maximum internal clock frequency of 1028 MHz. Manufactured on a 90 nm CMOS process, the device is packaged in a 1152-pin FCBGA and operates from 0°C to 85°C. An FPGA is a programmable semiconductor in which configurable logic blocks, memory resources, input/output circuitry and dedicated processing elements form a hardware function that is defined after manufacture. Within the broader semiconductor hierarchy, this device is an integrated circuit, a programmable-logic device and an FPGA. The Virtex-4 FX architecture targets demanding parallel processing, signal processing, networking, communications, embedded control and test-equipment designs. The XC4VFX100-10FFG1152C combines 10,544 configurable logic blocks or logic cells with 6,930,432 RAM bits. Its 576 I/Os provide substantial connectivity for high-speed data paths and external interfaces. The -10 suffix identifies the device speed grade, while the 1152-pin package supports a large number of power, ground, configuration and user-I/O connections. A 1.2 V internal supply voltage and 90 nm CMOS process are also identified for this device. The architecture combines programmable logic with substantial block RAM and dedicated hardware resources, allowing multiple parallel datapaths to be implemented without relying on a processor for real-time control. Its 1028 MHz maximum internal frequency provides a headline timing figure, although practical operating performance also depends on the selected speed grade, clocking resources, I/O standards, routing demand, power characteristics and PCB implementation. Typical applications include high-speed network interface equipment, telecom and industrial control systems, instrumentation, signal processing, test and measurement platforms, embedded vision systems and communications infrastructure. The 576-I/O count is particularly useful for designs requiring parallel data acquisition, multiple high-speed interfaces or extensive external memory connectivity. Board design must account for the FCBGA-1152 footprint, controlled-impedance routing, multilayer power distribution, thermal management, decoupling and FPGA-specific configuration requirements. Differential pairs and high-speed interfaces should be routed with the reference-plane geometry and matching practices specified in the manufacturer’s design documentation. This page organizes the device’s core FPGA, logic, memory, I/O, package, temperature and process information into an engineering-focused format, together with drop-in ordering options, comparison parameters and practical selection guidance for Virtex-4 FX designs.

RFQ İletişim
XC4VFX12-10FF668C - 12,312 Logic Cell FPGA | AMD | 668-BGA
XC4VFX12-10FF668C

XC4VFX12-10FF668C - 12,312 Logic Cell FPGA | AMD | 668-BGA

AMD XC4VFX12-10FF668C is a Virtex-4 FX field-programmable gate array containing 12,312 logic cells and 1,368 configurable logic blocks, with a maximum clock frequency of 1028 MHz and 0.2 ns combinatorial delay per CLB. The device is packaged in a 668-pin S-PBGA and uses CMOS technology for high-density programmable digital logic. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O resources can be configured after manufacture. The FPGA hierarchy progresses from configurable logic blocks to logic cells, then to a field-programmable gate array, and ultimately to the broader semiconductor category. Virtex-4 FX devices combine programmable logic with high-speed parallel interfaces, memory resources, clocking, and dedicated I/O capabilities for communications, industrial control, signal processing, and embedded systems. The -10 speed grade provides a maximum clock frequency of 1028 MHz, while the 0.2 ns combinatorial delay per CLB supports timing closure in demanding synchronous designs. Its 12,312 logic cells and 1,368 CLBs permit parallel processing, wide state machines, control logic, and complete processor or interface subsystems to be consolidated into one programmable device. The 668-ball package supports a substantial connection count for high-pin-count board-level systems. The CMOS implementation supports efficient integration of complex digital functions on one device. Compared with a fixed-function ASIC, an FPGA allows configuration changes, shorter hardware iteration cycles, and field updates through a supported programming path. The device also provides a larger external interface surface than smaller FPGA packages, making it appropriate for designs using many parallel buses, high-speed transceivers, memory interfaces, or multiple clock domains. Typical uses include network packet processing, industrial automation, test and measurement equipment, telecommunications control planes, video infrastructure, embedded instrumentation, and high-speed interface aggregation. Engineers can place the device between sensors, converters, memories, and communications engines, then implement buffering, protocol handling, timing, and control functions in parallel. Its 1,368 CLBs are particularly useful when the design must meet a fixed latency rather than a minimum-area target. A critical design consideration is package-level signal integrity. The 668-pin S-PBGA requires careful via and trace planning, and its power architecture must be designed according to the Virtex-4 package and power-guidance documentation. Differential pairs, clocks, and high-speed interfaces should be routed with continuous reference planes and controlled length matching. This product page organizes the key Virtex-4 FX resource counts, speed information, package characteristics, replacement options, and practical implementation guidance. It also distinguishes the commercial -10 suffix and FF package code from nearby industrial and speed-grade alternatives so engineers can select a configuration with the correct operating requirements and procurement status.

RFQ İletişim
XC4VFX12-10FF668I - 12,312-Cell Virtex-4 FX FPGA | AMD
XC4VFX12-10FF668I

XC4VFX12-10FF668I - 12,312-Cell Virtex-4 FX FPGA | AMD

The AMD Xilinx XC4VFX12-10FF668I is a Virtex-4 FX field-programmable gate array with 12,312 logic elements, 1,368 logic blocks, 320 user I/Os, and a 668-position FBGA package. It uses CMOS fabrication technology and is offered in the -10 speed grade for design flexibility in performance-sensitive programmable-logic systems. A field-programmable gate array is a semiconductor whose digital functionality is configured after manufacture. The Virtex-4 FX family belongs to the broader FPGA hierarchy, combining configurable logic, programmable interconnect, block RAM, dedicated processing resources, and high-speed I/O in one device. This combination allows an embedded system to implement parallel data processing, control, networking, or signal-processing logic without building a custom ASIC. The XC4VFX12-10FF668I combines 12,312 logic elements with 320 user I/Os in a 668-pin surface-mount package. Its listed internal frequency reaches 1028 MHz, while its 90 nm CMOS process supports integration of large programmable-logic arrays with dedicated block memory. The industrial temperature option covers 0°C to 85°C, making the device suitable for controlled industrial equipment when its electrical and thermal limits are respected. The -10 suffix identifies a specific Virtex-4 speed grade rather than a fixed clock frequency for every design. Actual interface and logic timing depend on the selected I/O standard, clocking architecture, speed grade, device utilization, routing, and implemented design. Designers should use the Virtex-4 Family Overview Data Sheet and the appropriate device characterization information when constraining clocks and evaluating timing margins. Typical uses include industrial control, telecommunications, instrumentation, embedded processing, networking equipment, and test-and-measurement systems. The 320 user I/Os provide connectivity for parallel buses, control signals, high-speed serial interfaces, memory resources, and external clock inputs. The dedicated processing and programmable-logic resources also permit mixed hardware and software architectures when the system benefits from hardware parallelism. The 668-pin FBGA requires careful PCB planning. The design must follow AMD's package pinout files, provide adequate via and escape-routing resources, maintain continuous power and ground planes, and validate the BGA assembly process with the selected board fabricator. Thermal performance should be checked at the maximum expected ambient temperature and operating activity. This page combines package, logic-density, I/O, speed-grade, and temperature information with selection criteria, drop-in alternatives, and practical implementation guidance. It is intended to help engineers identify whether the XC4VFX12-10FF668I fits an existing Virtex-4 design before beginning detailed schematic, constraint, layout, and assembly work.

RFQ İletişim
XC4VFX12-10FFG668C - 12,312-Cell Virtex-4 FX FPGA | AMD
XC4VFX12-10FFG668C

XC4VFX12-10FFG668C - 12,312-Cell Virtex-4 FX FPGA | AMD

The AMD Xilinx XC4VFX12-10FFG668C is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 320 user I/O, and a maximum internal operating frequency of 1028 MHz. Built on 90 nm CMOS technology and supplied in a 668-pin FCBGA package, it combines programmable logic, block RAM, DSP resources, and selectable I/O standards in one reconfigurable semiconductor device. The -10 speed grade targets designs requiring a 1028 MHz internal clock, while the commercial temperature suffix C supports operation from 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. In the hierarchy of programmable devices, an FPGA sits above fixed-function logic and below a system-on-chip, combining configurable logic blocks, routing resources, memory, multipliers, and I/O. The XC4VFX12 belongs to the Virtex-4 FX family, which was designed for high-performance signal processing, networking, communications, industrial control, and embedded systems with substantial parallel processing requirements. The device provides 12,312 logic cells organized in 1,368 configurable logic blocks and includes 320 user I/O. Its 90 nm CMOS process supports operation with a 1.2 V core supply. These resources make the XC4VFX12 suitable for implementing parallel datapaths, protocol engines, image-processing pipelines, control logic, and mixed fixed-function/soft-processor systems within one package. The -10 designation identifies the device's speed grade, while FFG668C identifies the package, lead-free status, and commercial temperature grade. At the architecture level, the FPGA combines Configurable Logic Blocks with dedicated block RAM and DSP48 resources, allowing designers to map arithmetic and storage operations directly into silicon. Its reported 1028 MHz internal frequency describes the maximum internal clocking capability rather than the operating rate of every user interface. External interfaces still depend on selected I/O standards, board-level timing, pin constraints, and the clocking resources assigned in the implementation tools. Typical applications include telecommunications line-card control, industrial automation, radar and defense signal processing, medical imaging, video infrastructure, and embedded control platforms. In these systems, the XC4VFX12 can implement multiple parallel processing channels while supporting high-speed external data movement through its 320 I/O. It is also suitable for prototype development and legacy equipment refreshes where preserving an established Virtex-4 architecture reduces redesign risk. The principal design consideration is that this is a large, high-pin-count BGA device. PCB design must follow AMD's package and pinout files, provide dense power and ground distribution, and implement all required decoupling and controlled-impedance routing. Configuration storage, clocking, power sequencing, thermal performance, and legacy software-tool compatibility must also be planned before layout begins. This page consolidates the available device identification, package, speed-grade, temperature, and resource information into an engineering-focused reference. It also distinguishes documented ordering variants, explains the constraints affecting drop-in replacement, and highlights the design checks required for a reliable Virtex-4 FPGA implementation.

RFQ İletişim
XC4VFX12-10FFG668I - 12,312-Cell Virtex-4 FX FPGA | AMD
XC4VFX12-10FFG668I

XC4VFX12-10FFG668I - 12,312-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX12-10FFG668I is a Virtex-4 FX field-programmable gate array with 12,312 logic cells, 320 user I/O, a maximum internal frequency of 1028 MHz, and a 668-pin FCBGA package. Built on 90 nm CMOS technology with a 1.2 V core supply, it combines programmable logic, block RAM, dedicated DSP processing resources, and high-speed serial connectivity in one device. The -10 speed grade targets designs requiring predictable performance without the power and timing headroom of the faster -11 and -12 grades. An FPGA is a semiconductor whose digital circuit is defined by a bitstream loaded into configurable logic and memory fabric. Within the broader hierarchy of programmable-logic devices, an FPGA sits above simple programmable arrays and mask-programmed devices because its interconnect, logic blocks, memory, and dedicated processors can be reprogrammed for many different functions. The Virtex-4 FX platform extends that architecture with DSP and networking-oriented resources for demanding embedded, communications, and signal-processing systems. Key device characteristics include 10,544 listed logic cells, 12,312 total cells, 320 I/O, 668 package pins, 90 nm CMOS construction, and an operating-temperature range of 0 °C to 85 °C for the commercial-grade listing. The device is marked Pb-free and is listed as RoHS compliant, which supports regulated production and end-of-life equipment procurement where environmental conformance is required. The -10 designation identifies the speed grade rather than a change to the physical package or core architecture. Within the same 668-pin family, -11 and -12 devices provide higher speed options, while the C suffix identifies commercial temperature variants. Because these options change timing or temperature classes rather than the board footprint, they support controlled migration when a design requires additional timing margin or a broader temperature specification. Typical uses include telecommunications and network equipment, industrial control, test and measurement, video and image processing, defense-oriented communications, and embedded systems requiring parallel logic, block RAM, DSP, and serial transceiver resources. An FPGA implementation can consolidate multiple fixed-function devices into one programmable platform while retaining field-updatable behavior. The principal design constraint is power and thermal planning around the 1.2 V core supply. Board designers should follow the AMD power, decoupling, and pinout guidance for this package and preserve adequate copper and via connectivity around the device. Because the 668-pin FCBGA has a dense escape-routing requirement, layer count, via-in-pad practice, and assembly capability should be confirmed before layout begins. This page combines the device specifications, package details, lifecycle information, qualified same-package migration options, and application guidance engineers need when evaluating the XC4VFX12-10FFG668I for an existing Virtex-4 design.

RFQ İletişim
XC4VFX12-10SF363I - Virtex-4 FX 12,312-Cell FPGA | AMD
XC4VFX12-10SF363I

XC4VFX12-10SF363I - Virtex-4 FX 12,312-Cell FPGA | AMD

AMD XC4VFX12-10SF363I is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 240 user I/Os, a -10 speed grade, and a 363-pin FCBGA package. It is designed for industrial embedded systems that combine programmable logic, DSP processing, serial connectivity, and embedded PowerPC processing in one device. A field-programmable gate array is a programmable digital semiconductor whose interconnected logic, memory, DSP, and I/O resources can be configured after manufacture. The XC4VFX12 belongs to the Virtex-4 FX hierarchy: FPGA, Virtex-4 generation, FX platform, programmable logic device, and semiconductor. It is intended for applications requiring more logic and specialized processing than entry-level FPGAs while retaining a single integrated device. Key characteristics include 10,544 logic cells or logic blocks, 12,312 total cells, 663,552 configuration bits, 240 user I/Os, 90 nm CMOS construction, and a stated internal frequency of 1028 MHz. The -10 speed designation identifies the device's performance grade. Its 363-pin FCBGA package supports dense board layouts, although careful via, escape-routing, thermal, and signal-integrity planning is required. The Virtex-4 FX architecture integrates programmable logic with dedicated DSP resources, high-speed serial transceivers, block RAM, and embedded PowerPC processors. This combination allows designers to consolidate control logic, digital signal processing, network interfaces, and processor-based functions instead of implementing them across several discrete components. The 90 nm process also provides a meaningful density improvement over earlier FPGA generations while supporting a broad range of industrial embedded designs. Typical applications include industrial control and automation, telecommunications equipment, networking infrastructure, test and measurement systems, embedded video processing, and industrial networking. The 240 I/O count is useful for parallel control and data interfaces, while the integrated DSP and serial capabilities support filtering, protocol handling, data acquisition, and communications functions. The primary design constraint is board implementation around the 363-pin FCBGA. Use the manufacturer's package pinout and PCB escape-routing guidance, provide the required supply rails and decoupling, and validate high-speed serial routing against the relevant device specifications. Reuse of an existing design requires exact pin, package, speed-grade, voltage, and configuration compatibility checks. This page consolidates the device's documented logic capacity, I/O count, process technology, package information, lifecycle position, replacement constraints, and practical implementation considerations. It also distinguishes true same-footprint alternatives from newer devices that may require a different package, logic configuration, or PCB redesign.

RFQ İletişim
XC4VFX12-10SFG363C - Virtex-4 FX FPGA | AMD
XC4VFX12-10SFG363C

XC4VFX12-10SFG363C - Virtex-4 FX FPGA | AMD

The AMD XC4VFX12-10SFG363C is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 1368 configurable logic blocks, and 240 user I/O in a 363-pin FCBGA package. The device uses 90 nm CMOS technology, operates from a 1.2 V core supply, and provides a listed internal frequency of 1028 MHz for the -10 speed grade. A field-programmable gate array is a programmable logic semiconductor whose digital functions are defined through a configuration bitstream rather than fixed circuit wiring. Within the device hierarchy, this Virtex-4 FX device belongs to the FPGA and CPLD category of programmable-logic semiconductors. Its large logic capacity, high pin count, and embedded processing resources support designs requiring parallel data processing, specialized interfaces, and flexible hardware adaptation. Key features include 12,312 logic cells, 1368 configurable logic blocks, 240 user I/O, and a 363-ball FCBGA package. The -10 designation identifies the device speed grade, while the commercial-temperature ordering code uses the C suffix. According to the Xilinx datasheet, the operating temperature range is 0°C to 85°C. The device is also identified as lead-free in component listings. The 90 nm CMOS implementation places this device in AMD/Xilinx's established Virtex-4 generation. Its architecture combines programmable logic, block RAM, DSP-oriented arithmetic resources, and dedicated I/O capabilities. The 1028 MHz internal-frequency listing describes a headline device characteristic rather than a guarantee that every user interface or design will operate at that rate; practical performance depends on timing closure, resource utilization, clocking, I/O standards, and the selected design. Typical applications include telecommunications and 5G infrastructure, industrial automation, medical imaging, aerospace and defense systems, test equipment, and research platforms. Its 240 I/O and high logic-cell count are useful for parallel datapaths and multi-channel control systems, while the large 363-contact package supports extensive power, ground, configuration, clock, and user-I/O connections. PCB implementation requires careful power-plane distribution, decoupling, and ball-layout planning for the FCBGA package. Designers should use the manufacturer pinout and package information when assigning power, ground, configuration pins, and differential I/O. Signal-integrity analysis and appropriate multilayer stack-up are important because high-speed interfaces can be affected by return paths, supply noise, and skew between external devices. This product page combines exact ordering information, package and logic characteristics, supported drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to accelerate engineering review, sourcing, PCB planning, and legacy-design maintenance for the XC4VFX12-10SFG363C.

RFQ İletişim
XC4VFX12-10SFG363I - 12,312-Cell Virtex-4 FX FPGA | AMD
XC4VFX12-10SFG363I

XC4VFX12-10SFG363I - 12,312-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX12-10SFG363I is a Virtex-4 FX field-programmable gate array with 12,312 logic cells, 10,544 logic blocks, 240 user I/O, a 1.2 V core supply, and a 363-pin FCBGA package. Its 90 nm CMOS construction and -10 speed grade support established Virtex-4 designs requiring configurable logic, parallel processing, block RAM, and dedicated hard resources. An FPGA is a programmable digital logic device in the broader semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, input/output blocks, embedded memory, and specialized hard cores. The XC4VFX12 belongs to the Virtex-4 FX family and provides a balance of logic density, I/O availability, and programmable architecture for industrial controls, communications equipment, signal processing, and embedded systems that were designed around the Virtex-4 ecosystem. The -10 designation identifies the device speed grade within the Virtex-4 family. The SFG363 package designation identifies the 363-pin fine-pitch BGA configuration, while the trailing I denotes the industrial-temperature ordering option. The listed device provides 240 user I/O and operates from a 1.2 V core supply. Its 1,028 MHz internal-frequency figure and 12,312-cell capacity make it suitable for parallel datapaths, protocol handling, embedded control, and DSP-style processing when paired with suitable external memories and clocking. The 90 nm CMOS process gives the Virtex-4 FX architecture a mature, electrically stable implementation that remains practical in legacy and long-lifecycle equipment. Programmable logic and routing allow the same FPGA family to support multiple control, communication, and arithmetic functions. Hardware resources such as block RAM and dedicated input/output structures reduce the amount of external logic needed, while selectable I/O standards support connections to industry-standard buses and external converters. Typical applications include industrial automation, network-interface equipment, video and image pipelines, telecommunications, test instrumentation, and embedded control systems. The 240-I/O count is particularly useful for designs requiring substantial external connectivity, while 12,312 logic cells permit concurrent datapath and control functions. The 363-pin FCBGA also demands careful PCB construction, including multilayer routing, controlled-impedance design, and component-height planning around the large BGA footprint. For a new Virtex-4 implementation, preserve the established power, decoupling, clock, JTAG, configuration, and memory interfaces from the original design. Because the package has a dense ball grid and fine pitch, inspect the manufacturer package drawing and pinout before fabrication. Configuration memory, bus-width compatibility, I/O voltage constraints, and bitstream compatibility should be checked rather than assuming that a similarly named device is interchangeable. This page organizes the principal device characteristics, verified technical references, package information, application guidance, and qualified family alternatives into one engineering-focused resource. The comparison tables and design notes emphasize the decisions that matter when maintaining or redesigning a Virtex-4 FX board, including speed grade, package, temperature range, I/O availability, and configuration compatibility.

RFQ İletişim
XC4VFX12-11FFG668C - Virtex-4 FX FPGA | AMD
XC4VFX12-11FFG668C

XC4VFX12-11FFG668C - Virtex-4 FX FPGA | AMD

AMD XC4VFX12-11FFG668C is a Virtex-4 FX field-programmable gate array built on 90 nm CMOS technology, with 12,312 programmable cells, 320 user I/Os and a 1.2 V internal supply in a 668-pin FCBGA package. It combines programmable logic, block RAM, DSP resources and dedicated hard processors in a single device, making it suitable for demanding embedded, communications and signal-processing systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. The FPGA hierarchy extends from individual programmable logic cells through configurable logic blocks, block RAM and DSP resources to a complete programmable logic device. Compared with a fixed-function ASIC, an FPGA allows designers to revise hardware behavior, integrate multiple functions on one package and shorten development cycles. The XC4VFX12 contains 12,312 cells and 10,544 logic cells according to the device listing, with 1,368 configurable logic blocks identified in the component catalog. Its 320 user I/Os support communication among external memory, network transceivers, converters and custom interfaces. A reported internal frequency of 1,028 MHz describes a significant internal timing resource, while the -11 speed grade identifies its performance class within the Virtex-4 family. The Virtex-4 FX architecture integrates programmable logic with DSP processing capability and a PowerPC-based embedded processor subsystem. This combination allows control logic, arithmetic pipelines, memory interfaces and protocol functions to be implemented in one FPGA rather than across several discrete devices. It also supports parallel processing for applications such as image acquisition, communications infrastructure, industrial control and high-throughput data conversion. Typical applications include telecom line-card and baseband processing, radar and signal-analysis equipment, industrial vision, medical imaging, test and measurement systems, and high-speed network appliances. The 668-pin FCBGA package provides many physical connections for external memories and differential interfaces, but it also requires careful power delivery, decoupling, via-in-pad strategy and thermal planning on a dense multilayer PCB. Designers should use the AMD Virtex-4 package pinout files when assigning every power, ground, configuration and user-I/O connection. Because this is a large legacy BGA, differential-pair routing, layer transitions and exposed-pad heat removal require much more PCB discipline than a small leaded package. Configuration memory, bus-width adaptation, decoupling and auxiliary supply sequencing must be reviewed against the manufacturer documentation before layout release. This page combines device-level specifications, documented same-footprint alternatives, practical PCB guidance and engineering selection criteria. It is intended to help teams distinguish speed-grade, temperature-grade and package differences while preserving compatibility with existing Virtex-4 FX designs.

RFQ İletişim
XC4VFX12-11FFG668I - 320-I/O Virtex-4 FX FPGA | AMD
XC4VFX12-11FFG668I

XC4VFX12-11FFG668I - 320-I/O Virtex-4 FX FPGA | AMD

AMD XC4VFX12-11FFG668I is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 320 I/O positions, and a 668-pin FCBGA package. The device uses 90 nm fabrication technology and a 1.2 V core supply, combining configurable logic, block RAM, DSP resources, and selectable I/O standards in one programmable-logic device. A field-programmable gate array, or FPGA, is a semiconductor whose logic blocks, interconnect, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes CPLDs and ASIC alternatives. Compared with a fixed-function ASIC, the XC4VFX12 family allows designers to implement parallel processing, signal generation, protocol handling, and control functions in reprogrammable hardware while reducing the logic count required across separate devices. The principal device attributes are 12,312 logic cells, 320 I/O, 90 nm process technology, and a 1.2 V operating core voltage. The -11 speed designation identifies its performance grade within the XC4VFX12 ordering system. The FFG668 package provides a dense, board-level surface-mount option for systems requiring extensive programmable logic and high I/O connectivity. Its large 668-ball footprint demands careful ball-grid-array layout, power-plane design, and thermal analysis. Technically, the Virtex-4 FX architecture supports configurable logic resources alongside dedicated DSP and memory functions, allowing multiple data-processing paths to operate in parallel. This mixed-resource architecture is useful when a design combines control logic, high-throughput arithmetic, and external data acquisition without implementing those functions in separate physical devices. System-level performance depends on the selected bitstream, clocking architecture, memory interfaces, I/O standards, and routing congestion. Typical uses include telecommunications and networking equipment, industrial control, test and measurement, embedded signal processing, aerospace and defense systems, and high-speed data acquisition. The 320-I/O interface is particularly useful for parallel buses, memory interfaces, clock distribution, and multiple high-speed serial links when their supported I/O standards match the device configuration. Designers should verify the exact pin assignments, differential-pair routing, supply requirements, decoupling, and exposed thermal requirements in the AMD/Xilinx Virtex-4 package and device documentation. The 668-ball footprint also requires high-layer-count PCB construction and assembly capability, making mechanical compatibility, via-in-pad strategy, and solder-reflow profile central to a reliable implementation. This product page consolidates the device identity, exact ordering variants, package information, drop-in alternatives, comparison parameters, and implementation guidance into a focused engineering reference. It distinguishes true package-compatible alternatives from broader Virtex-4 capacity choices and highlights the design constraints that matter when planning a dense BGA board.

RFQ İletişim
XC4VFX12-11SF363I - 12,312-Cell Industrial FPGA | AMD
XC4VFX12-11SF363I

XC4VFX12-11SF363I - 12,312-Cell Industrial FPGA | AMD

The AMD XC4VFX12-11SF363I is a Virtex-4 FX field-programmable gate array with 12,312 logic cells, a maximum operating frequency of 1181 MHz, and 240 input and 240 output terminals. The device is packaged in a 363-terminal, square, fine-pitch, 0.800 mm pitch S-PBGA-B363 surface-mount package and is manufactured using CMOS technology. Its -11 speed grade and industrial temperature designation position it for performance-oriented embedded systems requiring substantial parallel programmable logic. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and configurable I/O resources can be programmed after fabrication. An FPGA belongs to the programmable-logic hierarchy above ASICs and microcontrollers, providing parallel hardware execution without the mask-production cost of a custom ASIC. Virtex-4 FX devices combine configurable logic, dedicated processing resources, block RAM, digital signal processing blocks, high-speed serial connectivity, and selectable I/O standards within one integrated device. The XC4VFX12-11SF363I provides 12,312 logic cells for datapath, control, protocol, and image-processing designs. Its 240 inputs and 240 outputs support substantial external connectivity, while the 363-ball package permits dense routing among power, ground, configuration, and user I/O. The Virtex-4 family supports -12, -11, and -10 speed grades, with -12 designated as the highest-performance grade and -11 providing the performance represented by this MPN. The device uses the Advanced Silicon Modular Block architecture and 90 nm CMOS fabrication to combine configurable logic with dedicated hardware resources. This architecture allows multiple independent processing tasks to execute concurrently rather than relying on sequential instruction execution. Selection logic embedded in the fabric supports routing flexibility, while dedicated block RAM and DSP resources can accelerate data-intensive pipelines when the design maps them appropriately. Typical applications include telecommunications and networking infrastructure, industrial automation, high-speed data acquisition, broadcast video processing, instrumentation, and embedded signal-processing systems. The large I/O count is particularly useful for parallel ADC or DAC interfaces, digital buses, and custom accelerator fabrics. Existing Virtex-4 designs can preserve the same package footprint when moving between qualified speed, temperature, or device-suffix options, subject to timing and power verification. A critical design consideration is that a BGA PCB must be designed for fine-pitch assembly, clean power distribution, controlled impedance routing, and careful via-in-pad or through-via escape patterns. Designers should also confirm pin compatibility, configuration requirements, memory-device interfaces, and timing closure before replacing one XC4VFX12 suffix with another. This page combines package, logic-resource, drop-in-alternative, and implementation guidance for faster engineering review.

RFQ İletişim
XC4VFX12-11SFG363C - Virtex-4 FX 12,312-Cell FPGA | AMD
XC4VFX12-11SFG363C

XC4VFX12-11SFG363C - Virtex-4 FX 12,312-Cell FPGA | AMD

The AMD XC4VFX12-11SFG363C is a Virtex-4 FX field-programmable gate array with 12,312 programmable cells, 240 I/O, and a 363-pin FCBGA package. It combines 1,368 configurable logic blocks, 1181 MHz internal performance, 81 kB of block RAM, and CMOS implementation on 90 nm silicon. The -11 speed grade targets the middle performance class of the Virtex-4 FX family, while the C suffix identifies the commercial temperature grade. Its 1.2 V core supply and lead-free construction suit established embedded, communications, industrial-control, and test-equipment platforms. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA belongs to programmable logic devices and combines configurable logic blocks with embedded memory, dedicated I/O, clocking, and specialized fabric resources. This makes an FPGA substantially more flexible than a fixed-function application-specific integrated circuit while providing greater parallelism than a conventional software-driven processor. The XC4VFX12-11SFG363C offers 12,312 cells, 1,368 configurable logic blocks, 240 I/O, and 81 kB of block RAM. Its listed internal frequency of 1181 MHz provides a useful performance-class reference, although realized system performance depends on the selected clock, logic design, memory architecture, I/O standards, and timing constraints. The 363-contact FCBGA supports a dense mix of user I/O and dedicated power, ground, configuration, clock, and auxiliary resources. Technically, the device belongs to the Virtex-4 FX generation and uses 90 nm CMOS technology. This architecture provides programmable logic, dedicated block RAM, programmable I/O, and on-chip resources suitable for parallel data processing. Because the part is mature and no longer in current production, engineers should treat it primarily as a supported-for-legacy-design component and validate tooling, bitstream, and supply continuity against their program requirements before committing a new production release. Typical uses include industrial control and automation, communications infrastructure, instrumentation, embedded signal processing, and legacy aerospace or defense equipment where an established Virtex-4 design and exact package compatibility are priorities. The FPGA can implement parallel datapaths, protocol interfaces, state machines, and memory-intensive control logic while avoiding the overhead of a general-purpose processor in tightly timed applications. The primary engineering consideration is package continuity. Use the AMD Virtex-4 package pinout files when assigning PCB lands, and treat the 363-ball FCBGA as a fine-pitch, complex BGA requiring appropriate PCB design rules, assembly process control, and thermal analysis. Validate the selected I/O voltage domains, configuration interface, decoupling, clocking, and power sequencing before schematic release. This product page organizes the device identity, verified technical attributes, lifecycle considerations, same-footprint alternatives, application guidance, and design cautions into a concise engineering reference. It also separates confirmed device characteristics from parameters that require the manufacturer datasheet or a hardware design review.

RFQ İletişim
XC4VFX12-11SFG363I - 12,312-Cell -11 Virtex-4 FX FPGA | AMD
XC4VFX12-11SFG363I

XC4VFX12-11SFG363I - 12,312-Cell -11 Virtex-4 FX FPGA | AMD

The AMD Xilinx XC4VFX12-11SFG363I is a Virtex-4 FX field-programmable gate array built for high-performance parallel processing, programmable signal processing, and interface-intensive embedded systems. The device contains 12,312 logic elements, 240 user I/O, 32 DSP slices, and 648 Kb of block RAM. It is supplied in a 363-ball FCBGA package as a -11 industrial-temperature speed grade. According to the device listings, its internal clock frequency is 1028 MHz and its junction-temperature range is -40°C to 100°C. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and signal-processing resources can be configured after fabrication. Within the product hierarchy, an FPGA is a programmable-logic device and an application-specific integrated circuit. The Virtex-4 FX family combines configurable logic blocks, block RAM, dedicated digital signal processing slices, and high-speed I/O in one device, allowing designers to implement multiple control, arithmetic, networking, and data-movement functions without constructing them from discrete logic devices. The XC4VFX12-11SFG363I's principal resources include 10,544 logic cells or logic blocks, 12,312 logic elements, 240 I/O, 32 DSP slices, and 648 Kb of block RAM. Its -11 speed designation places it between the -12 performance grade and the -10 grade in the Virtex-4 family. The 363-ball FCBGA package supports dense board layouts, while the exposed-ball format requires careful escape-routing, via assignment, solder-mask design, and thermal management. The industrial-temperature grade supports deployments where ambient and board temperatures can exceed commercial conditions. This device is particularly useful when a design requires deterministic parallel datapaths rather than sequential processor execution. DSP slices can accelerate filtering, correlation, transforms, and fixed-point arithmetic, while block RAM stores lookup tables, packet buffers, and waveform data. Distributed and programmable interconnect allow multiple clock domains, pipelined interfaces, and hardware protocol handling. The 240 I/O provide external connectivity for data capture, control signals, memory interfaces, clocks, and high-speed serial links implemented with appropriate board-level transceivers. Typical implementations include telecommunications line cards, industrial automation controllers, medical imaging equipment, radar and signal-processing modules, video-processing platforms, and research systems requiring programmable hardware acceleration. In a communication system, parallel datapaths can process multiple channels concurrently. In industrial equipment, programmable logic can implement real-time control, monitoring, and safety interfaces while retaining field-update flexibility. The primary design trade-off is that a complex BGA device requires careful PCB engineering. Engineers should follow the AMD/Xilinx package, pinout, power, decoupling, and configuration guidance, provide all specified supply rails, and plan thermal paths through the PCB and enclosure. Configuration storage, startup sequencing, clocking, and JTAG diagnostics should be designed alongside the programmable logic rather than added after functional logic is complete. This product page combines the exact device identity, package and resource details, lifecycle information, practical design considerations, structured comparisons, and confirmed same-family alternatives. It also distinguishes true same-footprint options from broader Virtex-4 devices that may require a board redesign, helping engineers evaluate replacement risk before committing a layout.

RFQ İletişim