XC3S700A-4FG484C - 13,248-Cell Spartan-3A FPGA | AMD
MPN: XC3S700A-4FG484C ✗ Son Kullanım ZamanıXC3S700A-4FG484C Genel Bakış
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after fabrication. Within the broader hierarchy, an FPGA is a programmable-logic device and a user-programmable semiconductor. It replaces many application-specific ASIC functions when a design must be revised, expanded, or produced in relatively low volumes without changing the physical circuit design.
The XC3S700A belongs to the Spartan-3A family and combines configurable logic blocks, dedicated block RAM, programmable I/O, and clocking resources. Its 13,248 logic cells provide substantial parallel-processing capacity for embedded control, data acquisition, communications, and industrial interface designs. The 372 user I/O pins support broad external connectivity, while 368,640 bits of block RAM support buffering, packet storage, data formatting, and state-holding functions.
The -4 designation identifies the device's performance class within the Spartan-3A family. The FG484 package is a 23 mm × 23 mm FBGA intended for surface-mount assembly and provides the pin count required for designs exposing many external signals. Configuration data determines the implemented logic at startup, allowing the same physical device to support multiple firmware-defined functions.
Typical applications include industrial automation controllers, data-acquisition systems, communications equipment, embedded video processing, consumer electronics, and automotive or telecommunications control modules. The large I/O count is particularly useful when a design combines parallel sensors, external memories, converters, communication transceivers, and high-speed digital interfaces on one programmable board.
Designers should validate signal integrity at each interface, preserve the required configuration sequence, and use the manufacturer pinout and PCB guidelines for the 484-FBGA footprint. Power, clock, decoupling, and termination decisions must be checked against the selected I/O standards and the -4 timing constraints before release to production.
This page combines the device's core resource figures, package details, lifecycle considerations, drop-in family options, and application guidance to support faster engineering selection. The AMD/Xilinx Spartan-3A family data sheet DS529 remains the primary technical reference for architecture, electrical characteristics, pin assignments, and package implementation.
Drop-in alternatifler için XC3S700A-4FG484C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC3S700A-4FG484C (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Package.
XC3S700A-4FG484I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC3S700A-4FGG484C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC3S700A-5FG484C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC3S700A-2FG484C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC3S700A-1FG484C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC3S700A-4FG484C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Spartan-3A field-programmable gate array (FPGA) |
| Logic Cells | 13,248 cells |
| User I/O Pins | 372 pins |
| Total Block RAM | 368,640 bits |
| Logic Array Blocks | 1,472 LABs |
| Configurable Logic Blocks | 1,472 CLBs |
| System Gates | 700,000 gates |
| Speed Grade | -4 |
| Paket | 484-FBGA (FG484), 23 mm × 23 mm |
| Montaj Türü | Surface mount |
| Junction Temperature Range | 0°C to 85°C |
| Temperature Grade | Commercial |
| Product Family | Spartan-3A |
| Configuration Architecture | SRAM-configured programmable logic |
XC3S700A-4FG484C 484-fbga (fg484), 23 mm × 23 mm Pin Yapısı Kılavuzu
XC3S700A-4FG484C (484-fbga (fg484), 23 mm × 23 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC3S700A-4FG484C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC3S700A-4FG484C için uygundur 6 uygulamas: Industrial Data Acquisition, Programmable Logic Control, Communications Equipment, Automotive Control Module, Embedded Video Processing, Consumer and Communications Products.
Industrial Data Acquisition
The AMD XC3S700A-4FG484C fits industrial data-acquisition systems that must combine many parallel sensors, converters, and external memory devices. Its 372 user I/O pins reduce the need for multiplexers, while 13,248 logic cells can implement acquisition sequencing, filtering, scaling, and control logic. The 368,640 bits of block RAM support temporary sample buffering and protocol conversion. Use the -4 grade for timing headroom and confirm that the calculated junction temperature remains within the 0°C to 85°C commercial range. If ambient conditions can exceed that limit, select the industrial-grade suffix rather than accepting intermittent timing failures or unreliable operation.
Önerilen
Programmable Logic Control
The XC3S700A-4FG484C is appropriate for industrial control cabinets requiring deterministic parallel logic, extensive discrete I/O, and field-updatable behavior. Its 13,248 configurable logic cells can host motion sequencing, interlocks, counters, state machines, and communication handling, while the 372 user I/O pins connect sensors, actuators, and bus transceivers directly. Block RAM can retain schedules or diagnostic traces. A production design should use constrained timing for all high-speed paths and define a safe configuration state for power loss. The 484-FBGA footprint also requires a board layout that follows the manufacturer's ball map and power-distribution guidance.
Önerilen
Communications Equipment
The AMD XC3S700A-4FG484C can serve as the programmable datapath in communications equipment where protocol framing, packet buffering, channel control, and parallel interfaces must be adapted without changing the PCB. Its 372 I/O pins support high pin-count transceiver and backplane interfaces, while 368,640 bits of block RAM provide useful packet or line-buffer capacity. The 13,248 logic cells support parallel-to-serial conversion, framing, checksums, and control logic. Timing closure must account for every selected I/O standard and the -4 device speed grade. Existing designs should preserve their configuration bitstream and validate the replacement device against the same clocking and I/O constraints.
Önerilen
Automotive Control Module
The XC3S700A-4FG484C's combination of 13,248 logic cells, 372 I/O pins, and 368,640 bits of block RAM makes it usable in legacy automotive control modules for sensor aggregation, actuator sequencing, diagnostics, and communication bridging. The commercial -4 part must be evaluated against the complete vehicle thermal environment; the industrial suffix is a closer match where ambient and enclosure temperatures exceed the commercial range. For a new safety-related design, confirm AEC-Q100 qualification separately because the ordering suffix alone does not establish automotive compliance. Preserve configuration control and perform environmental, timing, and functional-safety validation before production release.
Önerilen
Embedded Video Processing
The XC3S700A-4FG484C can implement embedded pixel pipelines, color processing, frame timing, and interface bridging in cost-sensitive video equipment. The 368,640 bits of block RAM are useful for line buffering and timing alignment, while the 372 I/O pins support parallel sensors, memory interfaces, and display-control links. Logic resources can be allocated among acquisition, filtering, and output stages. Because this is a programmable-logic device rather than a dedicated video processor, verify multiplier availability, memory bandwidth, and clock rates in DS529 for the selected implementation. Board-level signal-integrity analysis is essential for high-speed interfaces, and the design should include a defined startup configuration for reliable display or camera operation.
Önerilen
Consumer and Communications Products
The AMD XC3S700A-4FG484C supports compact consumer and communications products that benefit from field-configurable logic and a large I/O count. A single FPGA can implement protocol conversion, display or keypad control, storage interfaces, timing, and product-specific state management without requiring a dedicated ASIC. Its 13,248 logic cells and 368,640 RAM bits provide meaningful parallel-processing capacity, while the 484-FBGA package supports dense board layouts. For cost-driven production, confirm device lifecycle, configuration-memory strategy, and test coverage early in the design. Any transition to a current FPGA should include complete pin, timing, I/O-standard, and bitstream compatibility checks rather than assuming functional equivalence.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC3S700A-4FG484C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC3S700A-4FG484I | XC3S700A-4FGG484C | XC3S700A-5FG484C | XC3S700A-2FG484C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 484-FBGA (FG484) | 484-FBGA (FG484) | 484-FBGA (FG484) | 484-FBGA (FG484) | 484-FBGA (FG484) |
| Logic Cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells |
| User I/O | 372 pins | 372 pins | 372 pins | 372 pins | 372 pins |
| Block RAM | 368,640 bits | 368,640 bits | 368,640 bits | 368,640 bits | 368,640 bits |
| System Gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates |
| Speed Grade | -4 | -4 | -4 | -5 | -2 |
| Device Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Ana Farklılayıcılar
- Direct industrial-temperature migration path (karşılaştırma:XC3S700A-4FG484I)
- Exact -4 speed-grade resource configuration (karşılaştırma:XC3S700A-5FG484C)
- Consistent 484-FBGA mechanical platform (karşılaştırma:XC3S700A-2FG484C)
Tasarım Notları
Use the exact 484-FBGA footprint and ball numbering defined in the AMD/Xilinx Spartan-3A package documentation. Place the FPGA in accordance with the manufacturer fanout, escape-routing, and via-in-pad or via-adjacent recommendations. Because the XC3S700A-4FG484C exposes 372 user I/O pins, treat the PCB as a high-routing-density design: preserve continuous power planes, avoid splits beneath active signals, and maintain the specified decoupling connectivity. Do not derive ball assignments from a generic 484-BGA library.
Design the power rails for the device's required core and I/O voltages according to DS529, including tolerance, sequencing, and current limits. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground balls, with short, low-inductance connections. Check the worst-case static and dynamic current in each supported operating mode, and include controlled power sequencing where the configuration and I/O standards require it. Incorrect rail sequencing can compromise configuration reliability even when the FPGA logic itself is correct.
Do not treat a same-footprint Spartan-3A device as interchangeable without checking the complete ordering suffix, speed grade, temperature grade, configuration method, and supported I/O standards. Rebuild the project for the selected device and regenerate the bitstream. Re-run static timing analysis after changing from the -4 grade, and verify differential pairs, impedance-controlled interfaces, clock inputs, and configuration pins against DS529. A successful mechanical fit does not establish timing, electrical, or lifecycle equivalence.
Constrain every external interface with board-specific timing and I/O-standard rules rather than relying only on device pin names. Review rise/fall behavior, drive strength, pull-up or pull-down requirements, and receiver topology for each connected transceiver or memory device. For clocked interfaces, analyze source-synchronous or point-to-point timing against the -4 device limits and account for connector, package, and PCB loss. Post-layout signal-integrity simulation is recommended for high-speed edges or long routed paths.
Estimated: with input voltage VIN, output load current IOUT, and regulator efficiency η, linear-regulator dissipation is approximately PD = (VIN - VOUT) × IOUT; this formula applies only if the XC3S700A-4FG484C is operated from a directly regulated rail. Determine junction temperature from package thermal data, copper area, airflow, and adjacent heat sources, then compare it with the 0°C to 85°C commercial junction-temperature specification. Use the industrial suffix or additional board-level cooling when the calculated temperature exceeds the limit.
Uyumluluk Bilgisi
The obsolete-device status and exact order suffix should be reviewed against current AMD product and environmental declarations before assigning a compliance classification.