Ürünler (46.000+)

XC7Z045-1FBG676CES - 350K Zynq-7000 SoC | AMD
XC7Z045-1FBG676CES

XC7Z045-1FBG676CES - 350K Zynq-7000 SoC | AMD

The AMD XC7Z045-1FBG676CES is a Zynq-7000 system on chip combining a dual-core Arm Cortex-A9 processor with CoreSight debug support and Kintex-7 FPGA fabric in a 676-FCBGA package. The device provides 350,000 logic cells, operates the processor subsystem at 667 MHz, and supports 1.2 V and 3.3 V rails. A Zynq-7000 SoC is a programmable system-on-chip that integrates an Arm application processing unit with FPGA programmable logic in one device. This SoC hierarchy combines an FPGA, an embedded microprocessor subsystem, programmable input/output, memory interfaces, and dedicated hardware accelerators. That integration permits software-controlled hardware functions to share one device instead of occupying separate processors and FPGAs. The principal features of the XC7Z045 include 350,000 FPGA logic cells, a dual-core Arm Cortex-A9 MPCore configuration, CoreSight debugging, and a 676-pin FCBGA package measuring 27 x 27 mm. The -1 speed designation identifies the device speed grade, while the FBG package suffix identifies the package family and ball-grid arrangement used by the Zynq-7000 product line. Architecturally, the Arm Cortex-A9 cores provide a 32-bit Arm Thumb-2 processing environment for operating systems, control logic, networking stacks, and application software. The Kintex-7 FPGA fabric supports hardware pipelines, parallel interfaces, image processing, and other time-critical logic. CoreSight provides integrated debug and trace facilities, making the device suitable for systems requiring coordinated software and hardware observability. Typical applications include industrial machine vision, factory automation, networked control equipment, high-speed data acquisition, communications infrastructure, and embedded edge processing. The combination of 667 MHz Arm processing and 350,000 programmable logic cells is particularly useful when a control loop must interact directly with parallel sensors, high-throughput data paths, or custom hardware accelerators. Designers should preserve the package-specific power, ground, decoupling, and ball-escape requirements of the 676-FCBGA platform. The 1.2 V and 3.3 V rails require correct sequencing and sufficient decoupling, while high-speed interfaces demand controlled routing and return paths. PCB layout, power delivery, and thermal design must be validated together because the SoC combines many high-performance subsystems in one compact package. This page combines the verified device identity, package and performance characteristics, same-family drop-in alternatives, parameter comparisons, and practical design guidance into one engineering-focused reference for evaluating the XC7Z045-1FBG676CES.

RFQ İletişim
XC7Z045-1FBG676I - Zynq-7000 SoC, 350K Logic Cells | AMD
XC7Z045-1FBG676I

XC7Z045-1FBG676I - Zynq-7000 SoC, 350K Logic Cells | AMD

The AMD XC7Z045-1FBG676I is a Zynq-7000 family System-on-Chip (SoC) that integrates a dual-core ARM Cortex-A9 MPCore processor with a Kintex-7 FPGA fabric. It is housed in a 676-pin FCBGA package (27x27 mm) and operates at a maximum clock frequency of 667 MHz. The device provides 350K logic cells, making it suitable for high-performance embedded applications requiring both software programmability and hardware flexibility. A System-on-Chip (SoC) is an integrated circuit that combines multiple system components, such as processors, memory interfaces, and I/O, onto a single substrate. The Zynq-7000 family specifically merges a processing system (PS) based on ARM cores with programmable logic (PL) based on FPGA fabric. This architecture allows designers to implement complex algorithms in hardware while maintaining the flexibility of software-defined control, bridging the gap between traditional microprocessors and FPGAs. Key features of the XC7Z045-1FBG676I include 350K logic cells, 256 KB of on-chip RAM, and support for high-speed transceivers. The device also includes a rich set of I/O options, including multiple high-speed serial transceivers and general-purpose I/O banks. The dual-core ARM Cortex-A9 processor runs at up to 667 MHz, providing substantial processing power for real-time applications. From a technical perspective, the XC7Z045-1FBG676I leverages AMD's advanced 28nm process technology, balancing performance and power efficiency. The integration of the ARM processor with the Kintex-7 FPGA fabric enables low-latency, high-bandwidth communication between software and hardware, which is critical for applications like software-defined radio, image processing, and industrial control. The device supports a wide range of industry-standard interfaces, including DDR3/DDR4 memory controllers and PCIe. Typical applications include high-end embedded computing, aerospace and defense systems, medical imaging, and wired/wireless communications. The combination of a powerful processor and reconfigurable logic makes it ideal for prototyping and production in demanding environments. When designing with this device, careful attention must be paid to power supply sequencing and decoupling. The multiple power rails require proper sequencing to avoid latch-up or damage. Additionally, the high-speed transceivers demand clean power and careful PCB layout to maintain signal integrity.

RFQ İletişim
XC7Z045-1FFG676C - 350K Zynq SoC, 667MHz | AMD | FPGA
XC7Z045-1FFG676C

XC7Z045-1FFG676C - 350K Zynq SoC, 667MHz | AMD | FPGA

The AMD XC7Z045-1FFG676C is a Zynq-7000 system-on-chip that combines a Kintex-7 FPGA with a dual-core Arm Cortex-A9 processor. The device provides 350K logic cells, a processor clock frequency of 667 MHz, and 130 user I/Os in a 676-pin FCBGA package measuring 27 x 27 mm. The -1 speed grade supports a maximum processor operating frequency of 667 MHz, while the C suffix denotes the commercial temperature grade. A Zynq-7000 system-on-chip is an FPGA with programmable logic integrated with a hard processor subsystem. Unlike a conventional processor, the FPGA fabric can implement parallel data paths, custom interfaces, accelerators, and real-time control logic. The integrated dual-core Arm Cortex-A9 subsystem executes software, operating systems, networking functions, and control code, allowing one device to combine sequential processing and hardware parallelism. Key features include 350K FPGA logic cells, dual-core Arm Cortex-A9 processing, CoreSight debug support, and 130 user I/Os. The Kintex-7 programmable logic fabric supports parallel sensor processing, video pipelines, high-speed data acquisition, and hardware-assisted control. A 676-ball FCBGA provides the high pin count needed for interfaces, memory connectivity, power, ground, and differential I/O in compact embedded systems. The part is manufactured on a 28 nm process and uses a mixed architecture in which software controls system behavior while programmable logic accelerates data-intensive workloads. The processor side supports operating-system-based designs, and the programmable side can implement interfaces whose timing and parallelism would be inefficient using the processor alone. This architecture is particularly useful when deterministic response, low-latency transfers, or concurrent real-time processing are required. Typical applications include industrial machine vision, industrial automation, robotics, communications equipment, embedded control, high-speed data acquisition, and defense or aerospace electronics. The 667 MHz dual-core subsystem is appropriate for protocol handling and supervisory control, while the FPGA fabric can accelerate image processing, filtering, packet inspection, or sensor fusion without excessive processor overhead. Design considerations include confirming the FCBGA land pattern, power rails, decoupling strategy, DDR memory interface, and pin constraints before layout. Because this is a high-pin-count BGA, escape routing, via distribution, and thermal performance require careful PCB planning. The commercial-grade C suffix should be checked against the final ambient-temperature range and system qualification requirements. This page combines the device architecture, package details, engineering-use guidance, and same-footprint replacement analysis to support faster selection and board-level planning for Zynq-7000 designs.

RFQ İletişim
XC7Z045-1FFG676I - Dual Cortex-A9 667MHz SoC | AMD
XC7Z045-1FFG676I

XC7Z045-1FFG676I - Dual Cortex-A9 667MHz SoC | AMD

The AMD XC7Z045-1FFG676I is a Zynq-7000 Kintex-7 programmable system-on-chip with 350,000 logic cells, a dual-core Arm Cortex-A9 MPCore processor operating at 667 MHz, and 676-pin FCBGA packaging in a 27 mm by 27 mm body. It integrates programmable logic, fixed-function processing, memory interfaces, high-speed I/O, and debugging capabilities in one device. A Zynq-7000 SoC combines an FPGA fabric with one or more Arm Cortex-A9 processors. The programmable logic handles parallel data paths, interfaces, timing, and signal processing, while the processor subsystem supports operating systems, networking, control software, and application-level logic. This heterogeneous architecture provides more flexibility than a conventional microcontroller and more software integration than a standalone FPGA. The XC7Z045-1FFG676I provides 350,000 logic cells and a dual-core Arm Cortex-A9 MPCore configuration. Its CoreSight debug capabilities support trace and debug workflows, while the processor runs at 667 MHz. The device uses 28 nm FPGA technology and is associated with a 1 V core supply requirement, making it suitable for designs requiring substantial programmable logic alongside embedded processing. The integrated architecture can reduce board-level component count by combining an Arm processor, programmable logic, dedicated memory interfaces, and high-speed serial or parallel I/O. Designers can partition work between software and hardware: the processor can manage protocols and control flow, while FPGA logic accelerates parallel operations or implements time-critical interfaces. Hardware/software partitioning remains a key architecture decision because moving logic into programmable fabric can reduce CPU workload but increase resource and timing complexity. Typical uses include industrial control, factory automation, network infrastructure, machine vision, test and measurement, video processing, and communications equipment. The 676-ball FCBGA package supports high-density connections but requires careful PCB escape routing, power-plane design, thermal analysis, and assembly process control. Unlike a leaded package, it cannot be inserted into a conventional through-hole socket. For a new design, use the AMD Zynq-7000 package pinout files and ds191 data sheet to assign every ball, confirm voltage rails, and validate the selected board footprint. Programmable-logic clocking, DDR memory routing, high-speed differential I/O, decoupling, and exposed-pad power delivery require constraint-driven layout and post-route signal-integrity checks. This product page combines the core device characteristics with package guidance, speed- and grade-oriented alternatives, and practical selection criteria. It also distinguishes the XC7Z045-1FFG676I from related XC7Z045 variants by package code, speed suffix, and temperature-grade suffix so engineers can assess PCB reuse without confusing equivalent compatibility with identical qualification.

RFQ İletişim
XC7Z045-1FFG900C - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z045-1FFG900C

XC7Z045-1FFG900C - Dual Cortex-A9 Zynq-7000 SoC | AMD

The AMD XC7Z045-1FFG900C is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor with CoreSight debug capability and approximately 350,000 FPGA logic cells. The device operates at 667 MHz and is packaged in a 900-ball FCBGA measuring 31 x 31 mm. Its integrated architecture allows software-controlled applications and programmable logic to share DDR memory, peripherals, and I/O resources. A Zynq-7000 SoC is a programmable logic device combined with one or more Arm processors. The processor subsystem executes operating systems and application software, while the FPGA fabric implements parallel hardware, high-speed interfaces, and custom accelerators. This hierarchy places the device among FPGA and CPLD solutions, adaptive SoCs, and programmable semiconductor devices. Compared with a separate processor and FPGA, the integrated Zynq architecture can simplify data exchange and shorten the path between software-controlled functions and hardware logic. The XC7Z045 provides 350K logic cells, dual Arm Cortex-A9 cores, and CoreSight support. The 667 MHz processor rating supports embedded Linux and bare-metal software workloads, while the Kintex-7-class programmable logic supports parallel data processing, protocol handling, and custom accelerators. The 900-FCBGA package provides a large pin count for high-performance I/O and memory connectivity, although its fine pitch and thermal requirements make careful PCB design essential. The XC7Z045-1FFG900C belongs to the Zynq-7000 SoC family identified in the AMD DS191 product family document. Its “-1” speed designation, “FFG900” package designation, and “C” suffix identify the ordered device configuration. The 31 x 31 mm FCBGA is a surface-mount package, so the PCB must provide the full land pattern, power distribution, decoupling, and thermal-relief features specified by AMD. Typical uses include industrial machine vision, networked industrial control, test and measurement, communications infrastructure, high-resolution display processing, and embedded vision systems. In each case, the Arm subsystem can manage control software while the FPGA fabric handles deterministic data acquisition, image processing, protocol conversion, or high-speed parallel interfaces. Development requires FPGA-design software for the logic fabric and an embedded software toolchain for the Arm subsystem. Design the power rails for both processor and FPGA requirements, including transient response and sequencing. Place high-frequency decoupling capacitors close to the supply and ground balls, preserve the AMD-recommended ball-grid land pattern, and provide thermal paths through the PCB. Because a 900-FCBGA package has many fine-pitch balls, inspect the assembled board for solder bridging and verify power rails before enabling the programmable logic. This page combines the verified Zynq-7000 device identity and package information with practical design guidance, qualified same-footprint alternatives, application-specific engineering notes, and a parameter comparison for faster procurement and design decisions.

RFQ İletişim
XC7Z045-1FFG900I - Zynq-7000 SoC, 350K Logic Cells | AMD
XC7Z045-1FFG900I

XC7Z045-1FFG900I - Zynq-7000 SoC, 350K Logic Cells | AMD

The AMD XC7Z045-1FFG900I is a Zynq-7000 SoC that integrates a dual-core ARM Cortex-A9 MPCore processing system (PS) with a 28nm Kintex-7-class programmable logic (PL) fabric in a single device. It is housed in a 900-ball FCBGA package (31x31 mm) and operates at a maximum PS clock frequency of 667 MHz. This SoC provides 350K logic cells, making it a high-capacity platform for embedded systems that require both software flexibility and hardware acceleration. A System-on-Chip (SoC) FPGA combines a hard processor subsystem with programmable logic on one die. The Zynq-7000 family, introduced by Xilinx (now AMD) in 2012, is a leading example of this architecture. It allows designers to implement complex systems where the ARM cores handle control and communication tasks, while the FPGA fabric accelerates data-intensive algorithms. This integration reduces board space, power, and latency compared to discrete processor-plus-FPGA designs. Key features of the XC7Z045-1FFG900I include 350K logic cells, 667 MHz dual-core ARM Cortex-A9 processing, and a 900-ball FCBGA package. The device supports a wide range of I/O standards and includes high-speed serial transceivers. The 'I' suffix indicates an industrial temperature grade, suitable for harsh environments. The '1' speed grade offers a balance between performance and power consumption. The Zynq-7000 architecture provides a high-bandwidth connection between the PS and PL through AXI interfaces, enabling efficient data movement. The PL is based on the 7-series FPGA fabric, which includes configurable logic blocks, block RAM, and DSP slices. This allows for the implementation of custom accelerators, soft processors, and high-speed I/O interfaces. The PS includes memory controllers for DDR3/DDR3L, as well as a rich set of peripherals such as Gigabit Ethernet, USB, and SPI. Typical applications for the XC7Z045-1FFG900I include software-defined radio, industrial motor control, medical imaging, and aerospace and defense systems. Its combination of processing power and programmable logic makes it ideal for applications requiring real-time signal processing, high-speed data acquisition, and flexible I/O. The industrial temperature grade ensures reliable operation in demanding environments. When designing with this SoC, careful attention must be paid to power supply sequencing and decoupling. The device requires multiple voltage rails, and proper sequencing is critical to prevent damage. Additionally, the high-density BGA package requires a multi-layer PCB with controlled impedance traces for high-speed signals. AMD provides comprehensive reference designs and documentation to assist with these challenges.

RFQ İletişim
XC7Z045-2FBG676CES - 350K Logic Cell Zynq SoC | AMD
XC7Z045-2FBG676CES

XC7Z045-2FBG676CES - 350K Logic Cell Zynq SoC | AMD

AMD XC7Z045-2FBG676CES is a Zynq-7000 Kintex-7 FPGA system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with 350K programmable logic cells. The device operates at 800 MHz and is packaged in a 676-ball FCBGA measuring 27 mm by 27 mm. Its architecture unites hardware programmable logic, an ARM-based processing system, and CoreSight debug capabilities in one device. A Zynq system-on-chip is an FPGA-and-processor hybrid, combining the deterministic parallel performance of FPGA fabric with the programmability of a general-purpose embedded processor. Within the broader semiconductor hierarchy, this device is a system-on-chip, an adaptive SoC, an FPGA, and an embedded processing platform. It allows software running on the ARM Cortex-A9 processor to interact with hardware implemented in the programmable-logic section. The XC7Z045 provides 350K logic cells and an 800 MHz processor operating point. Listings identify connectivity including CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, and USB OTG. The 676-FCBGA package offers dense connectivity for high-speed fabric, memory interfaces, processor peripherals, and general-purpose I/O, although a complete pin map requires the package documentation and board design files. The Zynq architecture is organized around shared memory and programmable logic. Software can execute in the ARM processing system while dedicated hardware blocks accelerate parallel workloads. This division is useful when deterministic timing, high data throughput, or custom interfaces are required without moving the entire application into RTL. CoreSight support provides a common debug and trace framework for the integrated processing and logic resources. Typical uses include industrial control, machine vision, network equipment, embedded servers, data acquisition, communications infrastructure, and high-performance embedded systems. A 350K-cell fabric can implement parallel image-processing pipelines, protocol bridges, custom accelerators, or high-speed interface logic, while the Cortex-A9 side supports control software, networking stacks, and an operating system. Board design must account for the 27 mm by 27 mm FCBGA, its ball grid, power sequencing, decoupling, thermal management, and high-speed routing. Use the manufacturer package files and reference designs when assigning balls, validating escape routing, and planning thermal vias rather than relying on generic BGA layout assumptions. This product record combines the device architecture, package and interface details, commercial procurement guidance, drop-in family alternatives, and practical implementation considerations in a format that helps engineers evaluate hardware partitioning and PCB design before committing to a Zynq-7000 design.

RFQ İletişim
XC7Z045-2FBG676E - Zynq-7000 SoC FPGA | AMD | Industrial
XC7Z045-2FBG676E

XC7Z045-2FBG676E - Zynq-7000 SoC FPGA | AMD | Industrial

The AMD XC7Z045-2FBG676E is a Zynq-7000 system-on-chip FPGA combining a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug support and Kintex-7 FPGA fabric in a single 676-FCBGA package. The device provides 350,000 logic cells, an 800 MHz Arm Cortex-A9 processor clock, and a 27 mm by 27 mm surface-mount package for high-performance programmable systems. A Zynq-7000 SoC is a programmable logic device that combines a hard microcontroller subsystem with programmable FPGA logic. Its architecture places the Arm Cortex-A9 processor, memory controllers, and peripherals on one silicon device while allowing application-specific datapaths, interfaces, and accelerators to be implemented in the Kintex-7 fabric. This integration can reduce component count and simplify designs that combine control software with hardware-accelerated data processing. Key device characteristics include two Arm Cortex-A9 cores, 350K FPGA logic cells, an 800 MHz processor operating frequency, and a 676-FCBGA package. The device is manufactured on a 28 nm CMOS process and uses a nominal 1 V core supply. Its large FPGA fabric supports parallel processing, high-speed interface bridging, video pipelines, sensor fusion, and hardware acceleration, while the processor subsystem supports an operating system and application-level control. The FCBGA-676 construction requires careful PCB layout because the device provides more than 600 contacts in a compact 27 mm by 27 mm body. Power delivery, high-speed routing, thermal management, and ball-grid escape planning are central to successful implementation. Differential pairs and memory interfaces must be routed according to the manufacturer’s published constraints and reference design guidance. Typical uses include industrial vision, machine vision inspection, software-defined radio, embedded video processing, test and measurement, high-speed data acquisition, and network appliances. The dual-core processor handles control functions and networking while FPGA sections implement parallel pipelines or custom hardware accelerators. The large logic capacity makes the device suitable for designs that require substantially more parallel logic than a conventional microcontroller can provide. For new designs, confirm the exact temperature grade, supported I/O standards, power sequencing, and memory configuration before layout release. Use the manufacturer pinout, package files, and PCB guidelines for every ball assignment. Because this is a large BGA device, X-ray inspection and focused thermal testing are advisable during prototype assembly. This page consolidates device specifications, package details, application guidance, drop-in alternatives, and practical design considerations to support component selection and PCB planning for the XC7Z045-2FBG676E.

RFQ İletişim
XC7Z045-2FBG676I - Zynq-7000 SoC, 350K Logic Cells | AMD
XC7Z045-2FBG676I

XC7Z045-2FBG676I - Zynq-7000 SoC, 350K Logic Cells | AMD

The AMD XC7Z045-2FBG676I is a Zynq-7000 family System-on-Chip (SoC) that integrates a dual-core ARM Cortex-A9 MPCore processing system with a Kintex-7 class programmable logic fabric. This device combines the flexibility of an FPGA with the performance of an embedded processor, making it ideal for a wide range of applications including software-defined radio, industrial motor control, and high-performance video processing. The XC7Z045-2FBG676I features 350K logic cells, 800MHz maximum processor clock speed, and is housed in a 676-ball FCBGA (27x27mm) package. A System-on-Chip (SoC) is an integrated circuit that consolidates all components of a computer or other electronic system into a single chip. It typically includes a processor core, memory, input/output ports, and secondary storage interfaces. In the context of the Zynq-7000 family, the SoC combines a hard processing system (PS) based on ARM Cortex-A9 cores with programmable logic (PL) based on FPGA fabric. This architecture allows designers to implement custom hardware accelerators in the PL while running operating systems like Linux on the PS, offering a balance of performance, flexibility, and power efficiency. Key features of the XC7Z045-2FBG676I include 350K logic cells, 800MHz dual-core ARM Cortex-A9 processor, 16.25 Mb of block RAM, and 900 DSP slices. The device supports a wide range of I/O standards and includes high-speed transceivers for serial communication. The -2 speed grade indicates a high-performance variant, suitable for demanding applications. The industrial temperature grade (I suffix) allows operation from -40°C to +100°C, making it suitable for harsh environments. The Zynq-7000 architecture provides a unique advantage by enabling tight coupling between the processing system and programmable logic through an AMBA AXI interconnect. This allows for high-bandwidth, low-latency communication between software running on the ARM cores and custom hardware logic. The device also includes a memory management unit, DDR3/DDR3L memory controller, and various peripheral interfaces such as USB, Gigabit Ethernet, and SDIO, enabling a complete embedded system on a single chip. Typical applications for the XC7Z045-2FBG676I include software-defined radio, where the programmable logic handles baseband processing while the ARM cores run protocol stacks; industrial motor control, where custom PWM and encoder interfaces are implemented in logic; and high-performance video processing, where the PL accelerates image processing algorithms. The device is also used in aerospace and defense applications requiring high reliability and long-term availability. When designing with this device, careful attention must be paid to power supply decoupling and thermal management. The FCBGA package requires a well-designed PCB with adequate thermal vias and a heatsink for high-power applications. The device supports multiple power rails (VCCINT, VCCAUX, VCCO) that must be sequenced correctly during power-up to prevent damage.

RFQ İletişim
XC7Z045-2FF676I - 350K Zynq SoC in 676-FCBGA | AMD
XC7Z045-2FF676I

XC7Z045-2FF676I - 350K Zynq SoC in 676-FCBGA | AMD

AMD XC7Z045-2FF676I is a Zynq-7000 Kintex-7 adaptive SoC combining a dual-core ARM Cortex-A9 MPCore processor with 350K FPGA logic cells, operating at 800 MHz, in a 676-ball FCBGA package measuring 27 x 27 mm. The integrated system-on-chip architecture unifies programmable logic, hard real-time processing, and ARM-based software control on one device. A Zynq-7000 SoC is a heterogeneous programmable system-on-chip, combining an FPGA fabric with a hard processor system. It occupies the FPGA & CPLD category while also serving as a processor-centric embedded platform. This integration allows software developers to execute operating-system and application code while hardware engineers implement parallel interfaces, accelerators, protocol logic, and real-time control directly in the programmable fabric. The XC7Z045 device provides 350K logic cells and an 800 MHz dual-core ARM Cortex-A9 processor. Its integrated FPGA resources support customizable hardware data paths, while the processor subsystem handles sequential software workloads. The supplied distributor records identify the device as a 32-bit RISC system-on-chip with 1 V operation and a 676-pin FCBGA package. The FFG676I ordering designation also identifies the industrial-temperature and package configuration used for this part. The architecture is particularly useful when a design requires both high-level control and deterministic hardware assistance. Parallel processing implemented in the FPGA can accelerate functions such as data filtering, packet handling, image preprocessing, or interface bridging, while the ARM cores manage control flow and application services. Designers can partition a design between software and programmable logic according to latency, throughput, flexibility, and power constraints. Typical uses include industrial automation, embedded vision, communications infrastructure, test and measurement, defense-related processing, and high-performance embedded control. The 27 x 27 mm FCBGA package supports compact module-level integration but requires careful PCB layout, power delivery, thermal analysis, and BGA assembly capabilities. The component is suitable for designs that benefit from combining embedded Linux or bare-metal software with dedicated FPGA logic. A critical implementation consideration is that the 676-ball FCBGA requires a qualified high-density board stack-up, appropriate escape routing, and power and ground planes that satisfy the Zynq power-supply requirements. Pin assignments, decoupling, configuration interface, memory connections, and high-speed routing must follow the AMD Zynq-7000 design guidance rather than general BGA conventions. This page consolidates verified distributor and manufacturer information, identifies supported same-footprint alternatives, and provides practical selection guidance for designers evaluating the XC7Z045-2FF676I for embedded FPGA, processor, and high-speed system integration.

RFQ İletişim
XC7Z045-2FF900I - 350K Zynq SoC | AMD | Industrial FPGA
XC7Z045-2FF900I

XC7Z045-2FF900I - 350K Zynq SoC | AMD | Industrial FPGA

AMD XC7Z045-2FF900I is a Zynq-7000 Kintex-7 FPGA system on chip with 350,000 logic cells, 800 MHz processing capability, 19,558 Kb of block RAM, 900 DSP slices, and a 900-FCBGA (31 x 31 mm) package. The -2 ordering code identifies speed grade 2, while the I suffix identifies the industrial temperature option. Its industrial junction-temperature range is -40 °C to 100 °C. A Zynq-7000 SoC is a heterogeneous programmable-logic device that combines ARM Cortex-A9 processing hardware with Kintex-7 FPGA fabric in one package. This integration places a hard processor subsystem, programmable logic, programmable I/O, memory resources, and DSP resources within a single mixed-signal device. It belongs to the FPGA and SoC hierarchy and can consolidate control processing, parallel data acquisition, and programmable signal processing into one board-level platform. The XC7Z045 provides approximately 350,000 logic cells, 19,558 Kb of block RAM, and 900 DSP slices. Its dual-core ARM Cortex-A9 subsystem is suitable for standalone control software, while the Kintex-7 fabric can implement parallel datapaths, interface logic, protocol handling, and custom accelerators. The 800 MHz figure and CoreSight support identify a high-performance embedded processing configuration designed for demanding control and signal-processing systems. The FF900 package provides 900 solderable FCBGA positions in a 31 x 31 mm land pattern. This high pin count supports the device's extensive power, ground, signal, configuration, and high-speed I/O requirements. The package also creates demanding PCB-layout, assembly, thermal, and decoupling obligations, particularly around power delivery to the processor, FPGA fabric, memory interfaces, and transceiver-related I/O. Typical applications include industrial machine vision, industrial automation, communications infrastructure, test and measurement, embedded signal processing, and high-performance control systems. In these systems, the ARM subsystem can execute operating-system or bare-metal software while the programmable logic handles deterministic acquisition, filtering, protocol parsing, and data movement without relying solely on software execution. Designers should preserve the XC7Z045 power rails, decoupling network, configuration interface, clocking scheme, and DDR memory topology defined by the AMD hardware design guidance. The 900-FCBGA package also requires adequate thermal design and assembly process control. Package, operating-temperature, and several detailed electrical specifications remain unavailable in the supplied verified dataset and are therefore identified rather than estimated. This product record combines verified AMD and distributor data with package-aware alternatives, comparison parameters, and practical design guidance. It distinguishes exact same-package order variants from candidates requiring further qualification, helping engineers make sourcing and design decisions without treating electrical similarity as proof of drop-in compatibility.

RFQ İletişim
XC7Z045-2FFG676E - 350K Logic Cell Zynq-7000 SoC | AMD
XC7Z045-2FFG676E

XC7Z045-2FFG676E - 350K Logic Cell Zynq-7000 SoC | AMD

The AMD Xilinx XC7Z045-2FFG676E is a Zynq-7000 Kintex-7 programmable system-on-chip combining a dual-core ARM Cortex-A9 processor with a high-performance Kintex-7 FPGA fabric. It provides 350K logic cells, an 800 MHz processor operating frequency, and a 676-FCBGA package measuring 27 mm by 27 mm. The integrated architecture supports hardware acceleration, real-time control, high-speed connectivity, and programmable logic in one device. A Zynq-7000 SoC is a programmable SoC that places a hard-processor subsystem and FPGA fabric in the same package. Unlike a conventional FPGA with an external microcontroller, the XC7Z045-2FFG676E allows software running on the ARM Cortex-A9 processor to communicate directly with programmable logic through dedicated interfaces. This architecture reduces system complexity and improves data-path performance for industrial, communications, embedded, and defense applications. Key features include a dual ARM Cortex-A9 MPCore processor with CoreSight debug support, 350K Kintex-7 logic cells, 800 MHz processing capability, and a 676-ball FCBGA package. The device supports programmable-logic acceleration for image processing, control, networking, and protocol handling while the processor subsystem handles operating-system software, control functions, and application-level tasks. The FPGA fabric provides flexible parallel processing resources, while the ARM subsystem handles sequential software workloads and supervisory control. Designers can partition an application between software and hardware, placing latency-sensitive or repetitive operations in programmable logic and reserving the processor for decision-making, data management, and external interfaces. Typical applications include industrial automation, industrial Ethernet, motor control, video and image processing, communications infrastructure, test equipment, and embedded aerospace or defense systems. The 27 mm by 27 mm FCBGA package supports high-density PCB designs but requires careful escape routing, controlled impedance, thermal management, and reliable power delivery. For a new design, use the AMD Zynq-7000 documentation for device configuration, memory interfaces, clocking, and package escape routing. When upgrading an existing board, confirm that the replacement retains the same package ballout and device configuration before substituting it in production hardware.

RFQ İletişim
XC7Z045-2FFG676I - 350K Logic Cell ARM Cortex-A9 SoC | AMD
XC7Z045-2FFG676I

XC7Z045-2FFG676I - 350K Logic Cell ARM Cortex-A9 SoC | AMD

AMD XC7Z045-2FFG676I is a Zynq-7000 Kintex-7000 FPGA system on chip with 350K logic cells, a dual-core ARM Cortex-A9 MPCore processor operating at 800 MHz, and CoreSight debug support. The device is housed in a 676-pin FCBGA package measuring 27 mm by 27 mm. A programmable system on chip combines a programmable logic fabric with a hard processor subsystem in one semiconductor package. Within the FPGA and CPLD product hierarchy, the Zynq-7000 family combines Kintex-7000 FPGA logic, an ARM Cortex-A9 processor subsystem, memory interfaces, programmable I/O, and system peripherals. This integration can reduce component count and board area while allowing hardware acceleration and software-controlled functions to share one board. The principal feature set includes 350K programmable logic cells, two ARM Cortex-A9 processor cores, an 800 MHz processor operating frequency, CoreSight technology, and a 676-pin FCBGA package. The listed on-chip RAM size is 256 KB. These resources allow designers to implement parallel datapaths, control logic, communication interfaces, and processor-based supervisory functions within one FPGA SoC. The device belongs to the Zynq-7000 product line, whose architecture separates application execution in the ARM Cortex-A9 subsystem from real-time or parallel processing in the FPGA fabric. Processor software can configure the programmable logic and coordinate system-level functions. The exact processor memory interfaces, programmable I/O counts, voltage ratings, temperature limits, and package thermal characteristics are not stated in the available product information and should be confirmed in the AMD Zynq-7000 SoC datasheet before design release. Typical applications include industrial machine control, factory automation, network equipment, high-speed data acquisition, embedded vision, communications infrastructure, and test and measurement systems. In each case, the FPGA fabric can accelerate deterministic parallel operations while the Cortex-A9 subsystem runs control software, operating-system support, or supervisory code. The same 676-pin package is particularly useful when an existing Zynq-7000 PCB must support a different speed, temperature, or qualification grade without changing its land pattern. PCB design should begin with the AMD package pinout files and UG865 package definitions for the selected 676-ball device. Decoupling, power-plane segmentation, high-speed memory routing, clocking, and exposed-package thermal management must follow the manufacturer’s reference design and layout guidance. Firmware, boot media, memory interfaces, and programmable logic compatibility also need verification before selecting a different Zynq-7000 device as a hardware replacement. This product record combines the exact Zynq-7000 device identity, package information, same-package replacement analysis, comparison guidance, and practical PCB considerations in a form useful for hardware and procurement reviews. It is intended to support design decisions rather than replace the complete AMD datasheet, package files, silicon documentation, or hardware-design guides.

RFQ İletişim
XC7Z045-3FBG676E 1GHz Dual Cortex-A9 SoC FPGA | AMD
XC7Z045-3FBG676E

XC7Z045-3FBG676E 1GHz Dual Cortex-A9 SoC FPGA | AMD

The AMD XC7Z045-3FBG676E is a Zynq-7000 adaptive SoC FPGA combining a dual-core ARM Cortex-A9 MPCore processing system with 350,000 Kintex-7 FPGA logic cells. The device operates at 1 GHz and is packaged in a 676-ball FCBGA measuring 27 x 27 mm. Its integrated system-on-chip architecture allows software-controlled processing and programmable hardware acceleration to share one device. A Zynq SoC is an adaptive system-on-chip that combines a hard processor system with programmable logic in one semiconductor. The processor system handles operating-system tasks, control functions, and external communication, while the FPGA fabric accelerates parallel data processing, custom interfaces, and real-time workloads. This hierarchy places the XC7Z045-3FBG676E within the SoC FPGA category, combining microprocessor, programmable logic, memory interfaces, and high-speed I/O capabilities. The XC7Z045-3FBG676E provides 350,000 FPGA logic cells and a 1 GHz dual-core ARM Cortex-A9 configuration. These resources are suitable for industrial image processing, network appliances, embedded vision, communications equipment, and test systems. The Cortex-A9 cores provide a familiar software execution environment, while the programmable logic can implement hardware pipelines and peripherals that would otherwise require additional devices. The Zynq-7000 architecture integrates the processing system and programmable logic into a 28 nm SoC design. This consolidation can reduce inter-device data transfers in applications that divide work between sequential software tasks and parallel hardware logic. The 676-ball FCBGA also provides a high pin count for memory connections, high-speed I/O, power delivery, and programmable logic interface requirements. Typical applications include industrial machine vision, industrial networking, video acceleration, embedded storage systems, and communications equipment. In a vision controller, the processor system can coordinate control software while FPGA logic performs pixel or packet processing in parallel. In a network appliance, programmable logic can implement high-throughput data paths while the ARM cores manage protocols and the operating system. The primary design consideration is the complexity of a large BGA package and a mixed ARM-plus-FPGA design. Board layout must follow the AMD package pinout and escape-routing guidance, while power, decoupling, thermal management, and configuration storage must be planned as a complete platform rather than as a single-chip schematic task. This page consolidates the confirmed device identity, package details, architecture, sourcing information, and replacement considerations with practical guidance for engineers evaluating this large adaptive SoC FPGA.

RFQ İletişim
XC7Z045-3FFG676E - 350K Logic Cell Zynq SoC | AMD
XC7Z045-3FFG676E

XC7Z045-3FFG676E - 350K Logic Cell Zynq SoC | AMD

The AMD XC7Z045-3FFG676E is a Zynq-7000 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with Kintex-7 FPGA programmable logic, rated for 1 GHz operation with 350,000 logic cells in a 676-ball FCBGA package measuring 27 mm by 27 mm. The device integrates hard processor peripherals, programmable logic, memory interfaces, and high-speed I/O in one heterogeneous computing package. A Zynq-7000 SoC is a programmable system-on-chip that merges an Arm application processing unit with FPGA fabric. Unlike a separate processor and FPGA, this architecture allows software and programmable logic to share memory and interfaces. The Cortex-A9 processor executes operating-system, control, networking, or signal-processing software, while the Kintex-7 fabric implements parallel datapaths, custom accelerators, high-speed interfaces, and real-time logic. The XC7Z045 device provides 350,000 logic cells, a 1 GHz processor operating point, dual Arm Cortex-A9 cores, and CoreSight debug capabilities. Its 676-FCBGA package supports dense integration of the SoC's power, ground, processor, memory-controller, and programmable-logic connections. The -3 suffix identifies the selected device speed grade, while the FFG676 package code identifies the 676-ball FCBGA configuration. The combination of processor and FPGA fabric makes the XC7Z045 suitable for systems requiring deterministic parallel throughput, flexible peripherals, high-speed data movement, and software-controlled decision logic. Typical embedded tasks include image and video processing, industrial control, communications infrastructure, data acquisition, network security acceleration, and custom hardware-assisted software functions. CoreSight support assists designers during processor-based debugging and system validation. Designers should treat the BGA package as a high-density, multilayer PCB component requiring controlled escape routing, via structures, power-plane integrity, and assembly-process qualification. The 27 mm by 27 mm body also creates a substantial thermal and power-delivery challenge. Power, ground, decoupling, and board-level escape routing must therefore be designed together rather than added only after the logic and software architecture are complete. A key selection consideration is the distinction between exact ordering variants and true functional replacements. Other XC7Z045 speed grades and temperature grades can share the same 676-ball footprint, but processor performance, temperature coverage, qualification, and ordering-code differences may alter system behavior. Validate the complete suffix against the required operating environment and external interface design before approving any substitution. This page combines the manufacturer device information with package, application, comparison, and drop-in replacement guidance intended to accelerate component selection. It also highlights the engineering checks that matter most for a large BGA SoC: pin compatibility, speed-grade behavior, thermal capacity, supply sequencing, and PCB design closure.

RFQ İletişim
XC7Z045-L2FBG676I - 800MHz Zynq SoC FPGA | AMD | Industrial
XC7Z045-L2FBG676I

XC7Z045-L2FBG676I - 800MHz Zynq SoC FPGA | AMD | Industrial

The AMD XC7Z045-L2FBG676I is a Zynq-7000 system-on-chip FPGA combining a dual-core Arm Cortex-A9 processor with Kintex-7 programmable logic, delivering 800 MHz processor performance and approximately 350,000 logic cells in a 676-pin FCBGA package measuring 27 mm by 27 mm. A system-on-chip FPGA integrates programmable logic and a hard processor subsystem on one device. In the Zynq-7000 hierarchy, the Arm Cortex-A9 MPCore processor executes operating-system software and control functions, while the Kintex-7 FPGA fabric implements parallel data paths, high-speed interfaces, protocol accelerators, and custom hardware logic. This combination can reduce component count and simplify communication between software and programmable hardware. The headline configuration of the XC7Z045-L2FBG676I includes a dual Arm Cortex-A9 MPCore processor, CoreSight debug and trace support, an 800 MHz processor speed grade, and approximately 350K logic cells. Its -2 speed designation and industrial-oriented ordering code identify it for designs requiring greater processor performance than the -1 speed grade while retaining the Zynq-7000 device architecture. The 676-FCBGA package exposes the processor, FPGA fabric, memory interfaces, programmable I/O, high-speed transceivers, and configuration and power pins through a dense land-grid array. A BGA assembly demands controlled escape routing, via-in-pad or fanout techniques, matched-length groups for high-speed interfaces, and an exact component-specific footprint. Its 27 mm by 27 mm body dimensions make board area and thermal design important constraints. Typical applications include industrial control systems, embedded vision, network appliances, test and measurement equipment, industrial communications, and high-performance embedded signal processing. The processor subsystem supports control software, while FPGA resources accelerate parallel tasks such as image processing, protocol handling, data acquisition, and low-latency filtering. For a new layout, use the AMD package pinout files and device documentation for every pad assignment, power plane, configuration signal, and BGA escape route. Confirm that the board stack-up, assembly process, thermal path, and power sequencing satisfy the selected Zynq device's requirements before fabrication. This product page combines the device identity, package characteristics, drop-in alternatives, comparison parameters, and practical implementation guidance. It supports early architecture decisions while directing engineers to the AMD documentation for the authoritative electrical tables, pin assignments, timing constraints, and configuration requirements.

RFQ İletişim
XC7Z045-L2FFG676I - 350K Logic Cell Zynq-7000 SoC
XC7Z045-L2FFG676I

XC7Z045-L2FFG676I - 350K Logic Cell Zynq-7000 SoC

The AMD XC7Z045-L2FFG676I is a Zynq-7000 system-on-chip combining a dual-core Arm Cortex-A9 processing system with Kintex-7 programmable logic. The device provides 350K logic cells, an 800 MHz processor-class operating point, CoreSight debug support, and a 676-FCBGA package measuring 27 x 27 mm. Its integrated architecture combines hard real-time processing capability with programmable hardware acceleration in one package. A Zynq-7000 SoC is a programmable system-on-chip that combines an Arm Cortex-A9 MPCore processing system, programmable logic, memory controllers, and programmable I/O. This integration allows software running on the Arm processors to control custom hardware implemented in the Kintex-7 logic fabric. The combination is useful when a design requires more flexibility than a conventional microcontroller while avoiding a separate processor and FPGA arrangement. The principal features of the XC7Z045-L2FFG676I include 350K logic cells, dual Arm Cortex-A9 processor cores, an 800 MHz operating point, CoreSight system-level visibility, and 676-FCBGA packaging. The 27 x 27 mm package also supports high-density board layouts for industrial, communications, imaging, control, and embedded-processing systems. The L2FFG676I ordering suffix identifies the specific speed, package, and temperature-grade configuration within the XC7Z045 device family. Technically, the device separates the processing system from the programmable logic while allowing high-speed communication between the two domains. The Arm subsystem executes operating-system and application software, while the Kintex-7 fabric can implement parallel datapaths, custom accelerators, protocol logic, video pipelines, or interface logic. CoreSight support assists designers in debugging the complete system rather than treating the processor and programmable logic as unrelated blocks. Typical applications include industrial automation, embedded control, camera and image processing, network equipment, test and measurement platforms, and communications infrastructure. In each case, the 350K logic-cell fabric can accelerate parallel operations while the dual-core Arm subsystem manages control flow, operating systems, networking, or application-level tasks. PCB design requires careful attention to the high-density FCBGA escape routing, power delivery, decoupling, and thermal performance. Use the AMD package pinout files and the device datasheet when assigning every ball and planning the power grid. Validate the selected board stack-up, via-in-pad requirements, and thermal solution before releasing a production layout. This page organizes the verified product identity, package information, technical applications, and same-package replacement options into an engineering-focused reference for selecting and integrating the XC7Z045-L2FFG676I.

RFQ İletişim
XC7Z045-L2FFG900I - 350K Zynq SoC, 800MHz | AMD
XC7Z045-L2FFG900I

XC7Z045-L2FFG900I - 350K Zynq SoC, 800MHz | AMD

The AMD XC7Z045-L2FFG900I is a Zynq-7000 system-on-chip that integrates a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug support and Kintex-7-class programmable logic. The device contains 350,000 logic cells, operates up to 800 MHz for its Arm processing system, uses 28 nm process technology, and is packaged in a 900-pin FCBGA measuring 31 mm by 31 mm. Its combination of hardware processors and programmable logic allows software-controlled applications to be combined with high-performance parallel hardware on one device. A Zynq system-on-chip belongs to the FPGA and programmable-logic hierarchy. Unlike a conventional microcontroller, which executes instructions entirely in software, the Zynq-7000 architecture separates the processing system from the programmable logic. The processing system runs operating-system and application software, while the Kintex-7 programmable-logic section implements custom accelerators, interfaces, signal processing, and control logic. This architecture shortens the data path between software and hardware and allows functions to be partitioned between processors and programmable fabric. The XC7Z045-L2FFG900I provides 350K logic cells for programmable fabric and a dual-core Arm Cortex-A9 MPCore subsystem capable of operating at 800 MHz. It supports CoreSight debugging, making the integrated processor system observable through dedicated debug facilities. The 900-pin FCBGA package provides a large, high-density connection interface suitable for systems requiring substantial external memory, high-speed serial links, parallel processing interfaces, and multiple programmable-logic I/O resources. The 28 nm Zynq-7000 implementation combines programmable logic with dedicated processing-system resources on one die. This allows designers to avoid implementing complete peripheral or accelerator functions in soft logic when an efficient hardware implementation is preferable. In processing-heavy designs, software can control configuration, networking, and system services while programmable logic handles parallel data acquisition, encryption, video processing, or low-latency custom interfaces. Typical applications include industrial control systems, communications infrastructure, high-performance embedded processing, network appliances, test and measurement equipment, and video or image-processing platforms. The device is particularly suitable when a product needs deterministic parallel hardware, high-speed programmable I/O, and a general-purpose processor without using separate processors and FPGAs. Board design requires careful attention to the 900-pin FCBGA, including controlled-impedance routing, power and ground-plane integrity, thermal management, and high-density escape routing from the package. Designers should follow the AMD package pinout files and device documentation for ball assignments, power sequencing, decoupling, and PCB-library dimensions. This page combines the exact device identity, package details, speed and logic-cell information with application guidance, drop-in alternatives, and practical design considerations. It also identifies which detailed electrical, thermal, lifecycle, and package attributes require confirmation from the manufacturer documentation before a production release.

RFQ İletişim
XC7Z100-1FF900I - Dual Cortex-A9 Zynq SoC | AMD
XC7Z100-1FF900I

XC7Z100-1FF900I - Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z100-1FF900I is a Zynq-7000 system on chip with dual Arm Cortex-A9 MPCore processors, CoreSight debug capability, 444K Kintex-7 FPGA logic cells, a 667 MHz processor rating, and a 900-FCBGA package measuring 31 x 31 mm. It combines programmable logic, hard processor, memory interfaces, and high-speed connectivity in one device. A Zynq-7000 system on chip is an FPGA and ARM processor integration. In the product hierarchy, it is a system on chip, programmable logic device, FPGA, and embedded processor platform. The processor subsystem executes operating-system-level and application software, while the Kintex-7 programmable logic fabric implements parallel data paths, interfaces, signal processing, and other hardware-specific functions. This combination enables hardware/software partitioning without requiring two separate chips and associated interconnects. The verified device description identifies two Arm Cortex-A9 MPCore processors and CoreSight technology. It provides 444K logic cells for programmable FPGA resources and lists a 667 MHz operating frequency for the processor configuration. The 900-FCBGA package offers 900 solder balls in a 31 x 31 mm footprint. The listed LCSC price is $9,547.7967 as of October 28, 2026, reflecting the scale and specialized nature of this programmable SoC. Technically, the XC7Z100 belongs to the Zynq-7000 family and combines an ARM hard-processing subsystem with Xilinx Kintex-7 FPGA logic. CoreSight provides integrated processor debug and trace visibility. The same silicon package can support designs that divide work between sequential software and parallel programmable hardware, reducing external component count when application requirements align with the integrated architecture. Typical uses include industrial control, machine vision, network infrastructure, test and measurement, embedded signal processing, and communications equipment. Developers can implement hardware acceleration, custom interfaces, protocol handling, and data acquisition alongside application code. The 444K logic-cell fabric is especially useful where deterministic parallel operations, custom I/O, or high-throughput data paths are required. Design planning must include a 900-ball PCB land pattern, power and multi-rail sequencing, decoupling, thermal management, and programming-device support. Differential I/O and high-speed memory interfaces also require controlled routing and verification. A new layout should be compared directly with AMD package-pinout files rather than inferred from generic BGA conventions. This page combines the verified distributor data, official AMD datasheet link, package-pinout resource, and engineering-focused selection guidance. It also distinguishes the verified 667 MHz target from faster same-family alternatives and clearly identifies where distributor-specific electrical, lifecycle, or package details require confirmation before procurement.

RFQ İletişim
XC7Z100-2FF900I - Zynq-7000 444K SoC | AMD Xilinx
XC7Z100-2FF900I

XC7Z100-2FF900I - Zynq-7000 444K SoC | AMD Xilinx

The AMD Xilinx XC7Z100-2FF900I is a Zynq-7000 programmable SoC integrating a dual ARM Cortex-A9 MPCore processor with a Kintex-7 FPGA in a 900-FCBGA package. The device provides 444K logic cells, operates the ARM Cortex-A9 subsystem at 800 MHz, and is offered in the industrial -2 speed and temperature grade indicated by the I suffix. A Zynq-7000 SoC is a heterogeneous programmable system-on-chip that combines an ARM processing system, programmable logic, programmable I/O, memory controllers, and high-speed serial transceivers in one device. In the broader semiconductor hierarchy, it belongs to the field-programmable gate array family while adding a hard processor subsystem. This integration allows software-controlled systems to implement parallel hardware logic alongside a conventional Linux or bare-metal application processor. The XC7Z100-2FF900I headline resources are 444K Kintex-7 logic cells, an 800 MHz dual-core ARM Cortex-A9 configuration, and a 900-FCBGA package measuring 31 mm by 31 mm. It is positioned for designs requiring substantial parallel processing, high-speed connectivity, and an integrated real-time control architecture. The -2 device grade targets performance-oriented systems, while the I designation identifies the industrial temperature option. The integrated ARM Cortex-A9 MPCore subsystem supports a coherent dual-core application-processing environment, while the Kintex-7 fabric provides hardware acceleration for image processing, protocol handling, control loops, data acquisition, and custom peripheral logic. CoreSight debug resources accompany the processor and programmable logic, supporting design validation and post-silicon debugging. Exact fabric interface speeds, memory interface ratings, transceiver counts, and power envelopes were not included in the supplied source data and should be confirmed in the manufacturer data sheet. Typical deployments include industrial machine vision, high-speed inspection, laboratory instrumentation, industrial networking, embedded signal processing, and communications infrastructure. A video-processing design can assign pixel pipelines to programmable logic while the ARM subsystem runs control software and networking tasks. A deterministic acquisition system can use dedicated FPGA logic for sampling and buffering while the processor performs analysis, configuration, and external communications. Design planning must account for the package's 900 solder balls, multiple power rails, high-speed differential interfaces, and substantial thermal requirements. Follow the Zynq-7000 power-sequencing requirements, decouple each supply rail at the package pins, route high-speed pairs with controlled impedance, and provide a board-level thermal design appropriate for the selected performance class. This page consolidates distributor pricing, verified product descriptions, family-level alternatives, package information, and practical design guidance. It also identifies specifications that were not present in the supplied verification data so that engineers can distinguish confirmed values from items requiring confirmation against the AMD data sheet before layout or sourcing decisions.

RFQ İletişim
XC7Z100-2FFG900I - Zynq-7000 SoC, Kintex-7 FPGA, 444K Logic Cells | AMD
XC7Z100-2FFG900I

XC7Z100-2FFG900I - Zynq-7000 SoC, Kintex-7 FPGA, 444K Logic Cells | AMD

The AMD/Xilinx XC7Z100-2FFG900I is a Zynq-7000 All Programmable System-on-Chip (AP SoC) that integrates a dual-core ARM Cortex-A9 MPCore processor (up to 800 MHz) with a Kintex-7 FPGA fabric (444K logic cells, 26.5 Mb block RAM, 1540 DSP slices) in a single 900-ball FCBGA package (31x31 mm). It combines software programmability with hardware programmability, enabling hardware acceleration of compute-intensive workloads. A Zynq-7000 SoC is a heterogeneous multiprocessor device that fuses a Processing System (PS) - a dual ARM Cortex-A9 with NEON SIMD engines, caches, MMU, and standard peripherals - with Programmable Logic (PL) equivalent to a Kintex-7 FPGA. The PS boots first and configures the PL at start-up, allowing software designers to use familiar Cortex-A9 toolchains (GCC, Linux, FreeRTOS) while hardware designers accelerate critical paths in the PL. The XC7Z100 sits at the top of the Zynq-7000 family, sharing the Kintex-7 fabric with the Z-7045 but adding extra logic, DSP, and block RAM resources. Key features include 2x ARM Cortex-A9 cores at up to 800 MHz, 444K logic cells, 26.5 Mb block RAM, 1540 DSP48E1 slices, 16 GTX transceivers at up to 6.25 Gb/s, dual 12-bit 1 MSPS ADCs (XADC), 4x PCIe Gen2 hard blocks, and 2x USB 2.0 OTG ports. The integrated CoreSight debug enables multicore trace, and security features include AES, SHA, and RSA hardware accelerators alongside secure boot. Typical applications include high-performance embedded vision (machine-learning inference, ADAS front cameras), 8K video processing, software-defined radio baseband, industrial motor control with deterministic real-time loops, and avionics/medical imaging. The Kintex-7 PL is well suited to DSP-heavy algorithms like FFT, LDPC, and H.265 codec blocks. When designing, allocate decoupling and bulk capacitors close to each power rail (VCCPINT, VCCPAUX, VCCO, VCCAUX, MGTAVCC); use the AMD-recommended power-on/-off sequencing; and adopt the UG865 ASCII package files when laying out the 900-ball FCBGA. For evaluation, the ZC706 board (XC7Z045 in FFG900) is pin-compatible with the XC7Z100 FFG900 footprint, which AMD documents as an authorized Z-7100 reference platform.

RFQ İletişim
XC7Z100-L2FFG1156I - 800MHz Zynq-7000 SoC | AMD Xilinx
XC7Z100-L2FFG1156I

XC7Z100-L2FFG1156I - 800MHz Zynq-7000 SoC | AMD Xilinx

The AMD Xilinx XC7Z100-L2FFG1156I is a Zynq-7000 adaptive system-on-chip combining a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug technology and Kintex-7 FPGA programmable logic. The device contains 444,000 logic cells, operates at an 800 MHz processor core speed, and is packaged in a 1156-ball FCBGA measuring 35 mm by 35 mm. Its combination of hard processor logic, programmable fabric, high-speed connectivity, and integrated debug support makes it suitable for complex embedded systems requiring both software control and hardware acceleration. A Zynq-7000 SoC belongs to the heterogeneous computing hierarchy that combines an ARM application processor and FPGA logic in one package. Unlike a standalone FPGA, the device can execute operating-system software while programmable logic handles parallel data paths, protocol handling, image processing, or low-latency control. The Kintex-7 fabric provides the logic resources needed for parallel architectures, while the Cortex-A9 subsystem supports conventional software execution through its ARM instruction-set architecture. Key device characteristics include 444,000 FPGA logic cells, an 800 MHz Cortex-A9 core speed, dual ARM Cortex-A9 MPCore processing, and CoreSight debugging. The XC7Z100 designation identifies the highest-density member of the Zynq-7000 portfolio. The -2 speed designation and industrial temperature suffix distinguish this ordering code from other XC7Z100 variants. The large FCBGA package exposes a high-density mix of FPGA I/O, dedicated memory interfaces, serial transceivers, power pins, ground pins, and processor signals. The device is intended for industrial embedded processing, machine vision, control systems, communications equipment, and test-and-measurement platforms. In these systems, the processor subsystem can manage software workloads, control flow, networking, and operating-system services, while FPGA logic accelerates deterministic operations that benefit from parallel processing. CoreSight support assists designers with hardware-assisted debug, trace, and verification of programmable logic and processor execution. PCB implementation requires careful attention to the 1156-ball FCBGA escape routing, power delivery, decoupling, and thermal management. Use the AMD package pinout and UG865 package guidance when assigning balls and laying out the board. The high pin count makes via-in-pad or fanout techniques potentially necessary, while high-speed memory and transceiver interfaces require length matching and continuous return-path planning. This page combines the manufacturer-device identity, searchable package and processor specifications, verified source links, practical implementation guidance, and a conservative assessment of drop-in alternatives. Because the exact XC7Z100-L2FFG1156I package and pin assignment details are not reproduced here, use the AMD Zynq-7000 package placement diagram and device pinout files before fabrication.

RFQ İletişim
XC7Z100-L2FFG900I - 800MHz Zynq SoC | AMD | 900-FCBGA
XC7Z100-L2FFG900I

XC7Z100-L2FFG900I - 800MHz Zynq SoC | AMD | 900-FCBGA

The AMD XC7Z100-L2FFG900I is a Zynq-7000 system-on-chip combining a dual-core Arm Cortex-A9 processor with Kintex-7 FPGA programmable logic, delivering 800 MHz processing performance and 444K logic cells in a 900-pin FCBGA package measuring 31 x 31 mm. The integrated architecture supports simultaneous software-controlled processing and hardware-accelerated logic on one device. A Zynq system-on-chip is an FPGA-and-processor hybrid. Its hierarchy extends from a configurable SoC to a programmable logic device, embedded processor, and semiconductor. This integration reduces the number of discrete components needed in a system while preserving parallel programmable logic for data acquisition, signal processing, control, and communications workloads. The programmable logic can implement hardware pipelines, interfaces, accelerators, and deterministic real-time functions alongside software running on the Cortex-A9 cores. The XC7Z100 family provides 444K logic cells and an 800 MHz dual Arm Cortex-A9 MPCore configuration with CoreSight debug support. The industrial-temperature L2 grade supports operation from -40 °C to +100 °C. Integrated system features identified for this device family include AES encryption support, watchdog timeout detection, and an integrated temperature sensor. These functions support secure control, fault monitoring, and board-level diagnostics. The device combines programmable logic resources with dedicated processing, memory-interface, and fixed-function blocks. Software developers can use the processor subsystem for operating-system-level tasks, networking, and sequential control, while FPGA fabric handles parallel acquisition, filtering, protocol acceleration, and real-time data movement. Pin-compatible Zynq variants allow speed- or temperature-grade selection when the same PCB must serve different qualification requirements. Typical applications include industrial vision, communications infrastructure, real-time signal processing, embedded control, test and measurement, and secure industrial gateways. In a data-acquisition design, the processor can manage configuration, control flow, and data transfer while programmable logic performs parallel channel sampling and filtering. In a communications design, logic can implement high-rate packet processing while the processor manages protocols and system services. PCB design should follow the AMD Zynq-7000 package, pinout, power-supply sequencing, and decoupling guidance in DS191. Because the device combines many high-speed and low-voltage power domains, validate the complete power tree, thermal solution, differential clocks, and signal-integrity constraints on the final multilayer board before production. This page combines the device identity, verified feature details, package and grade distinctions, practical implementation guidance, and drop-in alternatives. It is structured to help engineers select the correct Zynq-7000 grade and plan a compatible PCB or replacement strategy without relying on generic FPGA component descriptions.

RFQ İletişim
XC8664FRIBEKXUMA1 - 8-bit XC800 MCU, 16KB Flash, 38-TSSOP | Infineon
XC8664FRIBEKXUMA1

XC8664FRIBEKXUMA1 - 8-bit XC800 MCU, 16KB Flash, 38-TSSOP | Infineon

The Infineon XC8664FRIBEKXUMA1 is an 8-bit microcontroller built around the XC800 family 8051-compatible CISC core, integrating 16 KB of on-chip Flash memory, 16 KB (16K x 8) program Flash, and 38-pin TSSOP packaging. It operates from a wide supply range of 2.5 V / 3.3 V / 5 V and runs the 8051 core up to 86 MHz (with peripheral domain scaling at 26.67 MHz per the Hotenda listing). According to the manufacturer datasheet, this IC is the first product of a new and advanced 8-bit uC family (XC8oo family), combining a high-performance 8051 core with on-chip Flash memory and powerful on-chip peripherals. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals such as timers, ADC, and communication interfaces. The 8051 CISC architecture, originally introduced by Intel in 1980, remains one of the most widely deployed embedded cores worldwide and underpins the hypernym hierarchy 8051 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The XC8664FRIBEKXUMA1 belongs to Infineon's XC866 sub-family, which is targeted at cost-sensitive industrial and automotive body applications requiring deterministic 8-bit performance. Key differentiating features include a TSSOP-38 footprint with gull-wing leads, automotive temperature grade, integrated 16 KB Flash that supports in-application programming, an on-chip ADC and Capture/Compare Unit (CCU6), and a MultiCAN node for automotive networking. The 86 MHz core clock enables high-throughput bit-manipulation routines typical of motor-control and sensor-interface code, while the wide 2.5 V to 5 V supply range simplifies integration into 3.3 V and 5 V mixed-rail systems without external level shifters. The architecture pairs the standard 8051 instruction set with an XC800-specific peripheral set, including the MultiCAN module, the CCU6 motor-control timer, and a 10-bit ADC with up to eight channels. The wide operating voltage window (2.5 V to 5 V) is a defining trait of the XC8oo family and removes the need for separate voltage regulators in many 3.3 V or 5 V designs. Internal PLL, oscillator, and brown-out circuitry further reduce the external BOM. Typical applications include automotive body electronics, sensor interface modules, low-end motor control, and industrial control. The on-chip MultiCAN node makes the part particularly attractive for in-cabin nodes communicating over a CAN bus at 100 kbit/s to 1 Mbit/s. Designers should note that this part is in the older XC8xx family; current Infineon 8-bit roadmaps have shifted to the XC2000 and AURIX families, so lifecycle planning is recommended before committing to long-life designs.

RFQ İletişim