XC7Z045-L2FBG676I - 800MHz Zynq SoC FPGA | AMD | Industrial
MPN: XC7Z045-L2FBG676I ✓ AktifXC7Z045-L2FBG676I Genel Bakış
A system-on-chip FPGA integrates programmable logic and a hard processor subsystem on one device. In the Zynq-7000 hierarchy, the Arm Cortex-A9 MPCore processor executes operating-system software and control functions, while the Kintex-7 FPGA fabric implements parallel data paths, high-speed interfaces, protocol accelerators, and custom hardware logic. This combination can reduce component count and simplify communication between software and programmable hardware.
The headline configuration of the XC7Z045-L2FBG676I includes a dual Arm Cortex-A9 MPCore processor, CoreSight debug and trace support, an 800 MHz processor speed grade, and approximately 350K logic cells. Its -2 speed designation and industrial-oriented ordering code identify it for designs requiring greater processor performance than the -1 speed grade while retaining the Zynq-7000 device architecture.
The 676-FCBGA package exposes the processor, FPGA fabric, memory interfaces, programmable I/O, high-speed transceivers, and configuration and power pins through a dense land-grid array. A BGA assembly demands controlled escape routing, via-in-pad or fanout techniques, matched-length groups for high-speed interfaces, and an exact component-specific footprint. Its 27 mm by 27 mm body dimensions make board area and thermal design important constraints.
Typical applications include industrial control systems, embedded vision, network appliances, test and measurement equipment, industrial communications, and high-performance embedded signal processing. The processor subsystem supports control software, while FPGA resources accelerate parallel tasks such as image processing, protocol handling, data acquisition, and low-latency filtering.
For a new layout, use the AMD package pinout files and device documentation for every pad assignment, power plane, configuration signal, and BGA escape route. Confirm that the board stack-up, assembly process, thermal path, and power sequencing satisfy the selected Zynq device's requirements before fabrication.
This product page combines the device identity, package characteristics, drop-in alternatives, comparison parameters, and practical implementation guidance. It supports early architecture decisions while directing engineers to the AMD documentation for the authoritative electrical tables, pin assignments, timing constraints, and configuration requirements.
Drop-in alternatifler için XC7Z045-L2FBG676I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC7Z045-L2FBG676I (aynı form faktörü ve ayağa oturma) — farklı olan Logic Cells, Mounting Type, Speed Grade, Device Type, Maximum Clock Frequency.
XC7Z045-2FBG676I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7Z045-1FBG676I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7Z045-L1FBG676I
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7Z045-3FBG676I
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7Z045-2FBG676E
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7Z045-L2FBG676I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Zynq-7000 system-on-chip FPGA |
| Programmable Logic Family | Kintex-7 FPGA |
| Processor Subsystem | Dual Arm Cortex-A9 MPCore |
| Processor Maximum Frequency | 800 MHz |
| Logic Cells | 350K logic cells |
| Device Architecture | Zynq-7000 SoC |
| Debug and Trace Support | CoreSight |
| Package Type | 676-FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Pin Sayısı | 676 pins |
| Montaj Türü | Surface-mount ball-grid array |
| Speed Grade | -2 |
| Temperature Grade Code | I |
XC7Z045-L2FBG676I 27 mm x 27 mm Pin Yapısı Kılavuzu
XC7Z045-L2FBG676I (27 mm x 27 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC7Z045-L2FBG676I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC7Z045-L2FBG676I için uygundur 6 uygulamas: Industrial Control Systems, Embedded Vision and Image Processing, Network Data Processing, Test and Measurement Equipment, Industrial Communications Gateway, High-Performance Embedded Signal Processing.
Industrial Control Systems
The AMD XC7Z045-L2FBG676I fits industrial controllers that combine deterministic hardware processing with a conventional operating system. The dual-core Arm Cortex-A9 subsystem at 800 MHz can execute communication stacks, diagnostics, and motion-control software, while approximately 350K Kintex-7 logic cells can implement parallel sensor conditioning, timing, and fieldbus interfaces. Its 676-FCBGA package supports dense integration on a multilayer PCB, although careful power sequencing, via-in-pad assembly, and thermal design are required. Engineers should use the AMD pinout and electrical documentation when assigning power, configuration, memory, and high-speed I/O balls.
Önerilen
Embedded Vision and Image Processing
The XC7Z045-L2FBG676I is suited to embedded imaging systems that divide work between software and FPGA logic. The 800 MHz Arm Cortex-A9 cores can manage capture control, image organization, networking, and application software, while the Kintex-7 fabric can accelerate filtering, pixel formatting, and parallel feature extraction. With approximately 350K logic cells, the device balances dedicated processing capacity against system complexity. A camera-facing design must account for high-speed input timing, memory bandwidth, BGA escape routing, and heat spreading across the 27 mm by 27 mm FCBGA assembly.
Önerilen
Network Data Processing
The AMD XC7Z045-L2FBG676I can serve as a compact network-processing node that combines protocol software with hardware-assisted packet handling. The processor subsystem executes control planes, configuration, management, and higher-level protocol functions, while FPGA logic can accelerate classification, aggregation, filtering, or interface conversion. The dual-core Cortex-A9 configuration at 800 MHz supports a Linux or real-time software environment, and approximately 350K logic cells provide parallel datapath resources. High-speed memory and transceiver-routing decisions must be completed at the package level because the 676-ball BGA cannot be treated as a conventional perimeter-lead device.
Önerilen
Test and Measurement Equipment
The XC7Z045-L2FBG676I is a practical platform for modular test and measurement equipment requiring flexible acquisition, timing, and signal-processing logic. The Arm Cortex-A9 subsystem can run the instrument control application, handle calibration data, and coordinate communication with a host, while the programmable fabric implements parallel converters, counters, trigger logic, or digital filtering. The approximately 350K logic cells allow significant hardware customization without a separate FPGA. For precision instruments, pay particular attention to power-supply noise, clock jitter, BGA assembly tolerances, grounding, and deterministic memory layout.
Önerilen
Industrial Communications Gateway
The XC7Z045-L2FBG676I is appropriate for gateways that translate between industrial protocols, sensors, networks, and supervisory software. Its dual Cortex-A9 cores can handle protocol stacks, routing, encryption control, and device management, while FPGA logic can accelerate packet framing, serial interfaces, or data aggregation. The 800 MHz -2 grade provides additional processor headroom when the system performs computation close to the network edge. The 676-FCBGA package supports a compact module footprint, but module designers must provide controlled layer transitions, decoupling, thermal relief, and connector launch geometry compatible with high-speed signals.
Önerilen
High-Performance Embedded Signal Processing
The AMD XC7Z045-L2FBG676I suits embedded signal-processing systems that require programmable throughput alongside an application processor. The FPGA fabric can execute parallel filtering, correlation, spectral analysis, or interface conversion, and the 800 MHz Cortex-A9 subsystem can coordinate workflows and control peripherals. Approximately 350K logic cells allow substantial pipelined architecture, while CoreSight support assists processor-based debugging. Design teams should partition time-critical operations into the programmable fabric, maintain deterministic memory access, and validate thermal performance because sustained high-utilization workloads can increase junction temperature in the 27 mm by 27 mm BGA package.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC7Z045-L2FBG676I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC7Z045-2FBG676I | XC7Z045-1FBG676I | XC7Z045-L1FBG676I | XC7Z045-3FBG676I | XC7Z045-2FBG676E |
|---|---|---|---|---|---|---|
| Package | 676-FCBGA (27 mm x 27 mm) | 676-FCBGA (27 mm x 27 mm) | 676-FCBGA (27 mm x 27 mm) | 676-FCBGA (27 mm x 27 mm) | 676-FCBGA (27 mm x 27 mm) | 676-FCBGA (27 mm x 27 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Subsystem | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore |
| Processor Speed | 800 MHz | 800 MHz | 667 MHz | 667 MHz | 1000 MHz | 800 MHz |
| Logic Cells | 350K logic cells | 350K logic cells | 350K logic cells | 350K logic cells | 350K logic cells | 350K logic cells |
| Debug and Trace | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Ordering Suffix | L2FBG676I | 2FBG676I | 1FBG676I | L1FBG676I | 3FBG676I | 2FBG676E |
| Temperature Grade | I suffix | I suffix | I suffix | I suffix | I suffix | E suffix |
Ana Farklılayıcılar
- Higher processor speed than the -1 speed-grade alternative (karşılaştırma:XC7Z045-1FBG676I)
- Closer performance match than a higher-speed alternative (karşılaştırma:XC7Z045-3FBG676I)
- Ordering configuration directly aligned with the -2 processor grade (karşılaştırma:XC7Z045-2FBG676I)
- High-end Zynq density in the same 676-ball footprint (karşılaştırma:XC7Z045-1FBG676I)
Tasarım Notları
Design the 676-FCBGA escape structure from the exact XC7Z045-L2FBG676I ball map and selected PCB stack-up. Route high-speed memory and transceiver interfaces through the shortest practical paths, maintain the specified impedance, and minimize layer transitions. Do not derive the land pattern from a generic BGA drawing; ball assignments can differ between Zynq devices even when the package body dimensions are identical.
Implement the power rails, sequencing, decoupling, and startup behavior exactly as specified in the AMD electrical documentation. Separate the processor, FPGA, and I/O supply domains according to the device power architecture, and place the required bulk and high-frequency decoupling capacitance at the associated power and ground balls. Review voltage tolerances and power-up ordering across process, temperature, and frequency corners before approving the power tree.
Provide a low-resistance thermal path from the FCBGA to the board and enclosure. Use a dense via field or equivalent spreading structure beneath the device, control copper on adjacent power areas, and evaluate the expected processor and FPGA activity with realistic memory traffic. Estimated thermal calculations must use the actual package geometry, board construction, airflow, and ambient temperature rather than a generic BGA thermal coefficient.
Use the AMD pinout files to partition clock, memory, serial, and configuration signals according to the required routing classes. Keep BGA breakout geometry consistent across the device so that fabrication and assembly can be balanced, and use the package stack-up model to tune escape traces and vias. Configuration pins, clocks, and high-speed I/O should receive special attention because their routing can affect bitstream loading and interface margins.
Avoid treating XC7Z045, XC7Z035, or different package suffixes as interchangeable without reviewing the complete ordering guide. The XC7Z045-1FBG676I has the same FB package but a 667 MHz processor grade, so it can fail a design that requires 800 MHz timing. Likewise, changing the E and I suffixes requires environmental verification. Confirm the exact MPN, speed grade, temperature grade, and pin map before releasing procurement or PCB documentation.
Uyumluluk Bilgisi
Compliance attributes require confirmation from the exact AMD product documentation or current declaration for this order code. AEC-Q100 status is not inferred from the I temperature-grade suffix.