Entegre Devreler

DSPIC33FJ64MC706AT-I/PT

DSPIC33FJ64MC706AT-I/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC706AT-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory and 16KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the computational architecture of a DSP with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes deterministic control loops (such as field-oriented motor control) while simultaneously handling communication, timing, and analog acquisition tasks on a single chip. The dsPIC33F family from Microchip Technology is a widely adopted 16-bit DSC platform for these mixed control-plus-connectivity designs. Key features of this device include the 40 MIPS dsPIC33F core with DSP engine and barrel shifter, 16KB of on-chip SRAM, 8-channel DMA controller, and 11 timers. Analog capability is provided by a 16-channel, 10-bit/12-bit ADC supporting high-rate simultaneous sampling - essential for current and voltage sensing in motor drives. Five external interrupt sources and multiple serial ports round out the I/O capability. The MC706 variant belongs to the motor-control (MC) subfamily, which integrates motor-control PWM peripherals suited to inverter and converter control. The CMOS process with low-power modes (Idle and Sleep) allows battery-powered and thermally constrained designs to reduce average current draw while retaining fast wake-up for real-time control loops. Typical applications include three-phase motor control (BLDC, PMSM, AC induction), digital power supplies and solar inverters, and industrial automation nodes that need deterministic control loops alongside serial communication. The 3.0V to 3.6V supply range matches standard 3.3V industrial rails. When designing with this device, budget the 16KB RAM carefully - control-loop state, DMA buffers, and communication stacks must share it; larger buffer requirements may favor the 128KB Flash variants of the same package. The industrial temperature rating (-40C to +85C) and RoHS3 compliance simplify qualification for factory environments. This page synthesizes distributor pricing, drop-in same-package alternatives, design notes, and application guidance not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC706T-I/PT

DSPIC33FJ64MC706T-I/PT - 16-bit DSC, 40 MIPs, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC706T-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPs of performance, 64KB (64K x 8) of Flash program memory, and 69 I/O, housed in a 64-pin TQFP (10x10 mm) surface-mount package rated from -40C to +85C. A digital signal controller combines the deterministic control flow of a microcontroller with the multiply-accumulate (MAC) hardware of a DSP core. In the power-management hierarchy, the dsPIC33F family sits between general-purpose 16-bit MCUs (such as the PIC24) and standalone DSPs, offering a single-chip solution for control loops that must execute fast math while managing peripherals, communication, and I/O. Key features include the 16-bit dsPIC33F core with DSP engine (40-bit accumulators, dual 16-bit working registers), 64KB Flash and 8KB SRAM, an internal fast RC oscillator with PLL allowing 40 MIPS operation without an external crystal, and industrial temperature coverage (-40C to +85C). The supply range is 3.0V to 3.6V (3.3V nominal), and the part is lead-free and RoHS-compliant per distributor listings. The MC706 variant of the dsPIC33FJ64MC family is optimized for motor control and digital power, integrating peripherals such as PWM modules, high-speed ADCs, and communication interfaces (UART, SPI, I2C, ECAN per family datasheet) that allow field-oriented control (FOC) and digital power loops to be executed at 40 MIPS with headroom. Typical applications include three-phase motor drives (BLDC, PMSM, ACIM), switch-mode power supplies and digital power conversion, power inverters and UPS systems, and sensor signal processing in industrial automation. The 69 available I/O on the 64-TQFP gives enough parallel interface capability for displays, keyboards, and companion ICs. Design consideration: the 3.0V to 3.6V supply window means this DSC is not 5V tolerant across all pins by default - verify per-pin tolerances in the manufacturer datasheet and add proper decoupling (multiple 0.1uF ceramics plus bulk capacitance) at each VDD/VSS pair. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and engineering design notes not found in the standard manufacturer datasheet, as of 2026-09-27.

RFQ İletişim

DSPIC33FJ64MC710A-E/PT

DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-E/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of FLASH program memory, 16KB of RAM, and 85 general-purpose I/O pins in a 100-pin TQFP (12x12 mm) package. It operates from a 3V to 3.6V supply and across the extended automotive temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting within the power-management and motor-control hierarchy of embedded processors. The dsPIC33F family merges a 16-bit modified Harvard architecture with DSP engine instructions, making it a middle tier between general-purpose MCUs and standalone DSPs. Key features include the 24-channel 10-bit/12-bit ADC capable of simultaneous multi-channel sampling, the Motor Control PWM (MCPWM) module with complementary outputs and dead-time insertion, multiple UART, SPI, and I2C communication ports, and AEC-Q100 automotive qualification signified by the -E temperature suffix. Architecturally, the dsPIC33F core executes most instructions in a single cycle at up to 40 MIPS, with hardware multiply, divide, and barrel shifter supporting control-loop mathematics such as field-oriented control (FOC). The A-silicon revision improves errata over the original dsPIC33FJ64MC710 die, and Microchip documents seamless migration paths to PIC24F/PIC24H MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC (BLDC) motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), power inverters, and digital power conversion, where fast ADC sampling synchronized to the PWM module is essential. When designing with this DSC, pair the PWM dead-time settings with gate-driver propagation delays and verify ADC sampling windows against the switching frequency; the 3.0-3.6V supply range requires a dedicated LDO or buck regulator on 5V industrial buses. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, providing a single citable reference for engineers evaluating the dsPIC33FJ64MC710A-E/PT.

RFQ İletişim

DSPIC33FJ64MC710A-I/PF

DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-I/PF is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance from 64KB of flash memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm) package with industrial temperature rating (-40C to +85C) and AEC-Q100 automotive qualification. A Digital Signal Controller combines the computational throughput of a DSP engine with the peripheral integration and deterministic interrupt architecture of a microcontroller. In the embedded systems hierarchy, the dsPIC33F family sits between general-purpose MCUs (such as the PIC24) and standalone DSPs, offering a single-chip solution that executes both C-based control code and math-intensive loops such as PID and field-oriented control. Key features include a modified Harvard architecture with a 16-bit RISC core, 40 MHz maximum operating frequency (40 MIPS), dedicated DSP engine with 17-bit x 17-bit single-cycle MAC, two 40-bit accumulators, and seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. The A revision (suffix A) adds enhanced peripherals and improved electrical characteristics over the original dsPIC33FJ64MC710. Technical depth: the device integrates motor-control-oriented peripherals including a motor control PWM module with complementary outputs and dead-time control, multiple UART, SPI and I2C ports, a CAN 2.0B controller, a high-speed 10-bit ADC capable of simultaneous multi-channel sampling, and an internal fast RC oscillator for crystal-less operation. Operating supply range is 3V to 3.6V (3.3V nominal). Typical applications include brushless DC (BLDC) motor control, single and 3-phase induction motor drives, switched reluctance motor control, uninterruptible power supplies (UPS), and digital power conversion where the CAN bus supports automotive and industrial networking. Design consideration: at 40 MIPS, ensure adequate decoupling on every VDD/VSS pair and route the PWM outputs with dead-time margins verified against gate driver propagation delays. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC710AT-I/PF

DSPIC33FJ64MC710AT-I/PF - 16-bit 40MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710AT-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC710A family delivering 40 MIPS performance with 64KB (64K x 8) of FLASH program memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm, PF) package rated from -40C to +85C. A digital signal controller combines the computational power of a DSP with the peripheral integration and control architecture of a microcontroller, sitting in the system hierarchy between a general-purpose MCU and a dedicated DSP chip. DSCs are optimized for control loops that need fast multiply-accumulate operations, such as field-oriented motor control, digital power conversion, and sensor signal processing. Key features include the dsPIC 16-bit core running at 40 MIPs, 8-channel DMA for low-CPU-overhead data movement, 9 timers, and 4 dedicated serial I/O ports. Connectivity is extensive: CANbus, I2C, IrDA, LINbus, SPI, and UART/USART interfaces cover automotive networking, industrial field buses, and general serial links. The CMOS process keeps power draw reasonable at full clock speed. Architecturally, the dsPIC33F core pairs a pipelined 16-bit MCU datapath with DSP-engine instructions (MAC, dual operand fetch), enabling deterministic single-cycle multiply-accumulate within the control ISR. Multiple PGECx/PGEDx pin pairs support in-circuit serial programming (ICSP); PGEC2 must be paired with PGED2 when used for ICSPCLK/ICSPDAT. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, switched reluctance motor systems, digital power supplies, and CAN-networked industrial nodes - exactly the use cases Microchip targets with the dsPIC33FJ64MC710A family. Design-wise, plan pin selection early: because multiple PGECx/PGEDx pairs exist, choose one pair and route it to the programming header during layout to avoid costly respins. This page synthesizes distributor pricing data, drop-in alternatives within the same 100-TQFP footprint, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC710AT-I/PT

DSPIC33FJ64MC710AT-I/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710AT-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC710A motor control family, delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory and 16KB of RAM, housed in a 100-pin TQFP (12x12 mm, 0.5 mm pitch) surface-mount package rated from -40C to +85C. A digital signal controller combines the compute architecture of a microcontroller with the DSP engine of a digital signal processor. In the power-management hierarchy, the dsPIC33F family sits between general-purpose MCUs (such as the PIC24) and dedicated DSPs, adding a DSP multiply-accumulate engine, 8-channel DMA, and motor-control-specific peripherals (PWM with dead-time insertion, quadrature encoder interface) to a familiar MCU toolchain. Key features include a 16-bit dsPIC33F core executing up to 40 MIPS, 64KB self-programmable Flash with in-circuit programming, and 16KB data RAM. The device integrates a 10-bit high-speed ADC, multiple UART, SPI and I2C serial ports, CAN 2.0B for industrial networking, and DMA channels that offload data movement from the CPU. According to Microchip product pages, the family targets brushless DC, single and 3-phase induction, and switched reluctance motor control. Technical depth: the dsPIC33FJ64MC710A core supports 40 MHz maximum clock operation (40 MIPS at 3.3V supply), with DSP instructions including 40-bit accumulators, dual operand fetch, and modulo/bit-reversed addressing. The 8-channel DMA and nine timers support deterministic real-time control loops, while the Output Compare/PWM modules generate complementary waveform pairs for inverter bridges. Per the Microchip USA listing, the related ATH grade variant is built on CMOS technology meeting AEC-Q100 automotive requirements. Typical applications include brushless DC (BLDC) and PMSM motor drives, solar inverters, digital UPS and power-factor-correction converters, and industrial automation nodes requiring CAN connectivity alongside DSP-class control loops. Design consideration: at 40 MIPS the device is sensitive to supply integrity; place 0.1 uF decoupling at all VDD/VSS pairs and keep the switching nodes of the power stage away from the analog front end to protect ADC accuracy. This page synthesizes distributor pricing, same-brand drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC710T-I/PT

DSPIC33FJ64MC710T-I/PT - 16-bit 40 MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC710 motor-control family, delivering up to 40 MIPS performance, 64KB (64K x 8) of FLASH program memory, 16KB of RAM, and 3.3V operation (3V to 3.6V supply), housed in a 100-pin TQFP (12 x 12 mm) surface-mount package rated from -40C to +85C. A digital signal controller combines the control peripherals of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it runs deterministic control loops for power conversion while retaining flexible I/O, timers, and communication peripherals. The dsPIC33F family belongs to Microchip's 16-bit architecture portfolio and offers seamless migration options to PIC24F, PIC24H MCUs, and dsPIC30F DSCs in similar packages. Key features of this part include the 40 MIPS dsPIC33F core at 3.3V, 69 I/O ports for high pin-count boards, an integrated DSP engine for fast FIR filtering and PID control, and industrial temperature qualification (-40C to +85C). The motor-control subclass (MC) integrates dedicated PWM peripherals designed for inverter and motor-drive applications. Architecturally, the dsPIC33F core uses a modified Harvard 16-bit pipeline that executes most instructions in a single cycle, with two 40-bit accumulators and a 17-bit x 17-bit single-cycle MAC for DSP math. FLASH program memory allows field reprogramming, and the 3V to 3.6V supply range supports standard 3.3V rails. Typical applications include sensorless BLDC and PMSM motor drives, digital power supplies (PFC, LLC), industrial automation, and embedded control systems requiring DSP-grade math with MCU-style peripherals. Design consideration: the 100-TQFP 12 x 12 mm package requires careful decoupling of all VDD/VSS pairs and a solid ground plane to maintain signal integrity at 40 MIPS clock rates. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC802-E/MM

DSPIC33FJ64MC802-E/MM - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC802-E/MM is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance, 64KB (64K x 8) of FLASH program memory, and automotive-grade AEC-Q100 qualification in a 28-pin QFN-S (6x6 mm) exposed-pad package operating from a 3.3V supply. A digital signal controller combines the deterministic interrupt handling and peripherals of a microcontroller with the mathematical throughput of a DSP. Within the power-management hierarchy, the dsPIC33F family sits above general-purpose MCUs (such as the PIC18 series) and below 32-bit MCUs, targeting closed-loop control applications that rely on high-speed, repetitive computations. According to Microchip, the dsPIC33F devices are pin compatible with the PIC24HJ family and share a very high degree of compatibility with the dsPIC30F family, enabling seamless migration. Key features include the modified Harvard 16-bit core with DSP engine (barrel shifter, 17-bit x 17-bit multiplier, 40-bit accumulator), motor-control PWM peripherals, and advanced analog-to-digital conversion. The -E temperature suffix guarantees operation from -40C to +125C, supporting under-hood and industrial environments. The architecture couples a 16-bit instruction width with 16-bit wide data RAM and single-cycle MAC operations, making it well suited to field-oriented motor control where Clarke/Park transforms execute every PWM cycle. Hardware division, modulo addressing, and DO/REPEAT loops further accelerate control math. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, PFC, buck), and sensorless FOC algorithms requiring deterministic 40 MIPS throughput. Design consideration: use the QFN exposed pad as the primary ground connection, soldered to a solid VSS copper pour, to minimize ground bounce during simultaneous PWM switching events. This page synthesizes distributor pricing data, pin-compatible family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33FJ64MC802-E/SP

DSPIC33FJ64MC802-E/SP - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip DSPIC33FJ64MC802-E/SP is a 16-bit digital signal controller (DSC) combining a dsPIC33F DSP core running at up to 40 MIPS with 64 KB (22K x 24) Flash program memory, a 3.0V to 3.6V supply range, and a 28-pin SPDIP through-hole package rated for the extended -40C to +125C temperature range. A digital signal controller is a hybrid class of power management and embedded processing IC that merges the computational engine of a digital signal processor (DSP) with the peripherals and architecture of a microcontroller (MCU). In the embedded control hierarchy, the DSC sits between a general-purpose microcontroller and a dedicated DSP, offering single-cycle MAC, barrel shifting, and hardware divide - capabilities targeted at high-speed, repetitive computations such as field-oriented motor control and digital power conversion. Key features include 40 MIPS throughput from an on-chip PLL, two PWM generators with independent timebases and complementary outputs for motor control, the Peripheral Pin Select (PPS) capability that remaps digital peripherals to any compatible pin, and a 10-bit, 1.1 Msps ADC suited to closed-loop current sensing. The -E/SP ordering code denotes the extended-temperature grade in the 28-SPDIP package, packaged in tubes for through-hole assembly. The dsPIC33FJ64MC802 belongs to Microchip's 16-bit dsPIC33F motor-control family and is pin compatible with the PIC24HJ family, sharing a high degree of code compatibility across the 16-bit portfolio. Development is supported by MPLAB X IDE and XC16 compiler toolchain with hardware debug via ICD/Real ICE. Typical applications include brushless DC and PMSM motor drives, switched-mode power supplies, digital ballasts, battery charging, and industrial sensing nodes requiring real-time signal processing in a compact, low-pin-count footprint. Design consideration: the 3.3V-only supply (3.0V to 3.6V) requires level shifting for 5V industrial peripherals; MCLR must be driven below VDD limits during programming. This page synthesizes distributor availability data, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33FJ64MC802-H/SO

DSPIC33FJ64MC802-H/SO - 16-bit DSC, 64KB Flash, 40MHz | Microchip

The Microchip Technology DSPIC33FJ64MC802-H/SO is a 16-bit digital signal controller (DSC) with 64KB of Flash program memory, 40MHz internal clock operation, and a 3.0V to 3.6V supply range, housed in a 28-pin SOIC package. It combines MCU control with DSP capability in a single core. A digital signal controller is a hybrid device that merges the deterministic control features of a microcontroller (interrupts, peripherals, Flash memory) with the high-speed, repetitive computation capability of a digital signal processor (DSP engine, MAC instructions). Within the power-management hierarchy, DSCs such as the dsPIC33F family sit above basic MCUs and are widely used wherever fast control loops - such as current loops in motor drives - must execute at microsecond intervals. Key features of this device include the Motor Control PWM module for precision motor drive, a DMA controller that offloads data transfers from the CPU, and advanced analog peripherals for sensing feedback signals. Per Microchip product data, the family is pin compatible with the PIC24HJ family and shares a high degree of compatibility with dsPIC30F and dsPIC33F devices, enabling seamless migration across the portfolio. Architecturally, the dsPIC33F employs a modified Harvard 16-bit core optimized for high-speed, repetitive computations as well as control. Program memory is Flash-based (64KB on this variant) with the family scaling up to 128KB Flash and 16K SRAM, while the DSP instruction set accelerates filtering and transform-based algorithms used in digital power and sensor processing. Typical applications include brushless DC (BLDC) and permanent-magnet motor control, digital power supplies (PFC, LLC), and sensor signal conditioning where the on-chip analog and DSP engine handle fast feedback loops. The CAN-capable, DMA-equipped architecture also suits industrial automation nodes. Design consideration: the 3.0V-3.6V supply requires a regulated 3.3V rail; the -H suffix denotes the wider temperature rating, so verify thermal margin in enclosed motor-drive enclosures. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

RFQ İletişim

DSPIC33FJ64MC802-I/MM

DSPIC33FJ64MC802-I/MM - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC802-I/MM is a 16-bit digital signal controller (DSC) delivering 40 MIPS at 40 MHz, with 64 KB of Flash program memory and 8 DMA channels, housed in a 28-lead QFN-S (6x6 mm) package. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and interrupt-driven determinism of a microcontroller. In the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs where motor control, digital power conversion, and sensor-processing loops demand multiply-accumulate performance per clock cycle. Key features include the dsPIC33F 16-bit modified Harvard architecture with DSP instruction support (MAC, DSP multiply), 40 MIPS maximum execution speed, 64 KB self-programming Flash, and eight DMA channels that move data without CPU intervention. Advanced analog peripherals and motor-control PWM outputs target precision control applications directly. The architecture is pin compatible with the PIC24HJ family and shares a high degree of compatibility with dsPIC30F and dsPIC33F devices, allowing seamless migration between 16-bit Microchip platforms. The CMOS core operates from a 3 V to 3.6 V supply, and the industrial temperature grade (suffix I) covers -40C to +85C. In-circuit serial programming and debug are supported by standard Microchip tools, including PICKIT and ICD programmers, as well as SEGGER tooling. Typical applications include brushless DC and permanent-magnet motor control, digital power supplies (PFC, LLC), and sensor signal processing in industrial automation. Design consideration: keep the oscillator circuit within 12 mm of the device clock pins with load capacitors adjacent to the crystal, as recommended in the Microchip datasheet, to preserve start-up margin. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC802T-I/SO

DSPIC33FJ64MC802T-I/SO - 16-Bit DSC 64KB Motor Control | Microchip

The Microchip Technology DSPIC33FJ64MC802T-I/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, delivering 40 MIPS at 3.0 V to 3.6 V with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 28-pin SOIC (0.295", 7.50 mm) surface-mount package. It integrates a motor-control PWM module, a 10-bit ADC, and a CAN module, making it a single-chip solution for embedded motor control and digital power conversion. A Digital Signal Controller (DSC) is a hybrid device that combines the real-time control peripherals and interrupt behavior of a microcontroller (MCU) with the single-cycle multiply-accumulate (MAC) arithmetic and barrel shifter of a digital signal processor (DSP). In the system hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it is a member of the embedded processor and controller category, under the broader semiconductor and integrated circuit taxonomy. The dsPIC33F architecture executes most instructions in a single cycle, enabling deterministic control loops that pure MCUs cannot match. Key differentiators of the DSPIC33FJ64MC802T-I/SO include its 40 MIPS core, 64 KB Flash, 16 KB SRAM, 8-channel DMA, and a dedicated motor-control PWM with complementary outputs and dead-time insertion. The device is pin-compatible with the PIC24HJ family and highly compatible with dsPIC30F devices, enabling seamless migration across Microchip's 16-bit portfolio. The device uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction words, supported by a barrel shifter and hardware divider. Its nanoWatt power management supports multiple sleep and idle modes for energy-sensitive designs, while the on-chip CAN module enables industrial networking without an external controller. Typical applications include three-phase brushless DC (BLDC) motor control, field-oriented control (FOC) of permanent-magnet synchronous motors (PMSM), digital power supplies, and automotive sensorless motor drives. The combination of 40 MIPS throughput and hardware PWM makes it well suited to closed-loop current and speed control at switching frequencies up to tens of kHz. When designing with this device, keep the analog supply (AVDD/AVSS) well decoupled from the digital rail and route the motor-control PWM outputs away from the ADC input traces to preserve conversion accuracy. The 28-pin SOIC package limits available I/O, so peripheral pin selection (PPS) should be planned early. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers a single reference for selection, replacement, and layout decisions.

RFQ İletişim

DSPIC33FJ64MC804-E/ML

DSPIC33FJ64MC804-E/ML - 16-bit 40 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC804-E/ML is a 16-bit digital signal controller (DSC) delivering 40 MIPS execution speed, 64 KB (64K x 8) of Flash program memory, and 16 KB (16K x 8) of SRAM, housed in a 44-pin QFN (8 x 8 mm) package. It operates from a 3 V to 3.6 V single supply and is rated for the extended -40C to +125C temperature range. A digital signal controller combines the computation throughput of a DSP engine with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33F family sits between general-purpose MCUs and standalone DSPs: it is a 16-bit processor core with integrated DSP multiply-accumulate instructions, making it a single-chip solution for control loops and signal processing. Key features of this part include a 16-bit modified Harvard architecture running up to 40 MIPs, motor-control PWM and advanced analog peripherals, and pin compatibility with the PIC24HJ family, which eases migration between controller families. The 64 KB Flash supports in-circuit self-programming, and the 16 KB SRAM provides headroom for control algorithms and buffering. The MC804 subfamily is specifically architected for precision motor control: dedicated motor-control PWM outputs, high-speed ADC sampling, and DSP instructions for field-oriented control (FOC) transforms. The advanced analog block integrates a fast ADC and comparators that offload the core in current-loop applications. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, switch-mode power supplies and power factor correction, digital power metering, and industrial automation nodes where high-speed repetitive computation is required. When designing with this device, decouple the 3.3 V rail locally at each VDD/VSS pair and follow the Microchip family reference manual for oscillator layout, since a stable 40 MIPS clock is central to control-loop timing. This page synthesizes distributor pricing, drop-in alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC804-E/PT

DSPIC33FJ64MC804-E/PT - 16-bit DSC 64KB Flash 40MIPS | Microchip

The Microchip Technology DSPIC33FJ64MC804-E/PT is a 16-bit Digital Signal Controller (DSC) combining a dsPIC33F core running at up to 40 MIPS, 64 KB of Flash program memory, and 8 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package with an extended -40C to +125C operating temperature range. A Digital Signal Controller is a hybrid device that merges the deterministic control structure of a microcontroller with the high-speed multiply-accumulate computation of a DSP. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it belongs to the class of 16-bit embedded processors, which in turn belong to the broader family of microcontrollers and semiconductor integrated circuits. The dsPIC33F family is pin compatible with the PIC24HJ family, allowing designers to move between control- and DSP-optimized variants without changing the PCB. Key features include 64 KB of self-programmable Flash, 8 KB of RAM, 8 DMA channels for peripheral data transfer without CPU intervention, dedicated motor control PWM peripherals, and advanced analog modules for sensor feedback loops. The device operates from a 3.0 V to 3.6 V single supply, with a maximum clock rate of 40 MHz (40 MIPS), matching the needs of closed-loop motor and power-conversion algorithms executed in microseconds. Architecturally, the dsPIC33F core pairs a 16-bit RISC pipeline with DSP-engine instructions (MAC, DSP multiply, barrel shifter), enabling high-speed repetitive computations such as FOC (field-oriented control), PI loops, and digital filtering. Code protection features safeguard intellectual property in the Flash array. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), solar inverters, and industrial sensing and control nodes. The MC (Motor Control) peripheral set and DMA make it a strong fit where precise PWM generation and fast ADC sampling must run concurrently. Design consideration: keep the supply strictly within 3.0 V to 3.6 V and decouple every VDD/VSS pair with 0.1 uF ceramics placed within 2 mm of the pins; the 44-TQFP thermal pad region benefits from solid ground planes for analog accuracy. This page synthesizes verified distributor data, drop-in alternatives, and design guidance not found in the manufacturer datasheet, with pricing verified as of 2026-09-27.

RFQ İletişim

DSPIC33FJ64MC804-H/ML

DSPIC33FJ64MC804-H/ML - 16-bit DSC, 64KB Flash, 40 MIPS | Microchip

The Microchip Technology DSPIC33FJ64MC804-H/ML is a 16-bit digital signal controller (DSC) delivering 40 MIPS at 3.3V with 64KB (64K x 8) of Flash program memory and a 44-pin QFN (8x8 mm) exposed-pad package. A digital signal controller combines the compute architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC is a class of embedded processor that sits between a general-purpose MCU and a dedicated DSP: it executes high-speed, repetitive mathematical loops (PID control, transforms, filtering) while simultaneously managing real-time I/O such as PWM generation and ADC sampling. The dsPIC33F family is Microchip's 16-bit DSC line, pin-compatible with the PIC24HJ MCU family and highly code-compatible with the older dsPIC30F family for seamless migration. Key features of the DSPIC33FJ64MC804-H/ML include the dsPIC33F core operating at up to 40 MIPS, motor-control PWM peripherals purpose-built for precision motor control, an advanced analog front end with high-speed 12-bit ADC, and a wide 3.0V to 3.6V supply range (3.3V nominal). The -H temperature grade supports -40C to +125C operation, making it suitable for demanding industrial environments. Architecturally, the device pairs the 16-bit modified Harvard core with DSP engine instructions (MAC, DSP multiply) and zero-overhead loops, so control-law computations execute deterministically without interrupt jitter. Flash program memory is 64KB and SRAM is sized per the family datasheet (family devices support up to 16K SRAM across the family). Multiple PGECx/PGEDx pin pairs support In-Circuit Serial Programming (ICSP) with any pair usable, provided the clock and data pins are used as a matched pair. Typical applications include brushless DC and PMSM motor drives, switched-mode power supplies, digital lighting ballasts, and embedded industrial control where sensor-loop and PWM timing must be tightly coupled. Design consideration: use only one matched PGECx/PGEDx pair for ICSP, and decouple the 3.3V rail with low-ESR ceramics placed close to the QFN exposed pad, which must be soldered to a grounded thermal pad for both electrical and thermal integrity. This page synthesizes distributor pricing data, verified drop-in alternatives, datasheet-sourced specifications, and practical design notes not consolidated in the manufacturer datasheet alone.

RFQ İletişim

DSPIC33FJ64MC804-H/PT

DSPIC33FJ64MC804-H/PT - 16-bit DSC 64KB Flash Motor Control | Microchip

The Microchip Technology DSPIC33FJ64MC804-H/PT is a 16-bit Digital Signal Controller (DSC) combining a dsPIC33F core running at up to 40 MIPS with 64KB (22K instructions x 24-bit) Flash program memory and 16KB SRAM, housed in a 44-pin TQFP (PT) package rated from -40C to +150C. A Digital Signal Controller merges the computational power of a DSP with the peripheral set and ease of use of a microcontroller. Within the semiconductor hierarchy, the dsPIC33F family sits under the 16-bit MCU/DSC category, itself a branch of embedded processors, and is designed for control loops that demand both fast math and rich on-chip analog and PWM peripherals. Key features include a modified Harvard 16-bit architecture with DSP engine (17-bit x 17-bit single-cycle MAC, 40-bit accumulators), Motor Control PWM with complementary outputs and dead-time insertion, a 10-bit ADC capable of 1.1 Msps operation, and connectivity peripherals such as CAN 2.0B, UART, SPI and I2C. DMA controllers offload data movement from the CPU, keeping loop timing deterministic. Technically, the device operates from a 3.0V to 3.6V supply and executes from zero-wait-state Flash at 40 MIPS via an on-chip PLL from an external or internal oscillator. The H temperature grade extends operation to +150C, supporting motor drives mounted near hot electromechanical assemblies. Pin compatibility with the PIC24HJ family allows easy migration between general-purpose and motor-control firmware platforms. Typical applications include brushless DC and PMSM motor control with sensorless field-oriented control, switched-mode power supplies and digital power conversion, and automotive/industrial sensing nodes requiring CAN networking at elevated ambient temperatures. A key design consideration is power-supply sequencing and decoupling: place 0.1uF ceramics at every VDD/VSS pair and use the dedicated AVDD/AVSS pins with an RC filter for ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ content not found in the manufacturer datasheet. Pricing shown is a distributor estimate as of 2026-09-27; confirm live stock and pricing before ordering.

RFQ İletişim

DSPIC33FJ64MC804-I/ML

DSPIC33FJ64MC804-I/ML - 16-bit DSC 40MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC804-I/ML is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPs performance with 64KB Flash and 16KB SRAM in a 44-QFN (8x8 mm) exposed-pad package operating from 3V to 3.6V. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above a general-purpose MCU in math throughput and below a standalone DSP in raw floating-point capability, making it the preferred class for closed-loop control where high-speed repetitive computation must coexist with rich on-chip analog and PWM peripherals. Key features of the DSPIC33FJ64MC804 include the dsPIC33F 16-bit core running at 40 MIPs, 64KB (64K x 8) of Flash program memory, a dedicated Motor Control PWM module, and advanced analog peripherals. The industrial temperature grade (-40C to +85C, denoted by the -I suffix) supports harsh environments, and supply operation from 3V to 3.6V matches standard 3.3V rails. The dsPIC33F architecture provides a modified Harvard bus with DSP multiply-accumulate instructions, enabling single-cycle MAC operations essential for FOC (field-oriented control), digital filters, and sensor fusion. The MC804 variant targets the Motor Control sub-family, whose complementary PWM outputs and dead-time control simplify three-phase inverter designs. Per the Microchip product page, the dsPIC33F family is pin compatible with the PIC24HJ family, protecting software and layout investments across the 16-bit roadmap. Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), solar inverters, and high-intensity LED lighting, where fast ADC sampling and deterministic PWM update loops are mandatory. Design consideration: the 44-QFN exposed pad must be soldered to a solid ground plane for thermal and signal-integrity performance; verify 3.3V regulator headroom against core and I/O current during 40 MIPs operation. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

DSPIC33FJ64MC804T-I/ML

DSPIC33FJ64MC804T-I/ML - 16-bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC804T-I/ML is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory and a 3V to 3.6V supply, housed in a 44-pin QFN (8x8 mm) package with exposed pad. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33F family implements a modified Harvard, 16-bit RISC architecture with DSP instructions, making it a staple of the power management IC ecosystem for embedded control systems. Key features include 40 MIPS execution at 3.3V, dual program and data buses supporting simultaneous fetch and multiply-accumulate operations, 8 DMA channels for peripheral-to-memory transfers without CPU intervention, and 5 timers for motor-control and power-conversion timing. Peripheral integration covers the motor-control-oriented set expected of the MC family: high-speed PWM, ADC with simultaneous multi-channel sampling, and serial interfaces for industrial communication. The MC804 variant is purpose-built for high-speed repetitive computation. Its architecture provides hardware multiply, divide, and barrel shifter support, plus modulo and bit-reversed addressing modes that accelerate FIR filters and PID loops. According to Microchip, the dsPIC33F family is pin compatible with the PIC24HJ family and shares a high degree of compatibility with dsPIC30F devices, enabling seamless migration paths. Typical applications include precision motor control (BLDC, PMSM, stepper), digital power supplies and PFC stages, sensorless FOC drives, and industrial automation nodes where deterministic 16-bit control loops must run at tens of kHz. The 44-QFN exposed-pad package improves thermal and grounding performance for power electronics layouts. Design consideration: the 3V to 3.6V operating window requires a clean 3.3V rail; the exposed pad must be soldered to a ground pour for thermal and signal-integrity reasons, and the DSC needs a proper decoupling network plus MCLR pull-up for reliable in-circuit programming (ICSP). This page synthesizes distributor listings, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-27.

RFQ İletişim

DSPIC33FJ64MC804T-I/PT

DSPIC33FJ64MC804T-I/PT - 16-bit 40 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC804T-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance, 64KB of Flash program memory, 8KB of SRAM, and an integrated Motor Control PWM peripheral, housed in a 44-pin TQFP (10x10 mm) package rated for -40C to +85C operation. A digital signal controller combines the computational throughput of a digital signal processor with the deterministic control and peripheral set of a microcontroller. Within the power-management hierarchy, a DSC sits above general-purpose MCUs in signal-processing capability, making the dsPIC33F family a bridge between the PIC24HJ MCU family and dedicated DSP devices. Microchip confirms that dsPIC33F devices are pin compatible with PIC24HJ and share a high degree of compatibility with dsPIC30F, enabling seamless migration across these families. Key features include a 16-bit modified Harvard architecture executing up to 40 MIPS, 64KB (64K x 8) of self-programmable Flash, and an 8-channel DMA controller that offloads data movement from the CPU. The peripheral set includes multiple timers (5 timers per Microchip USA product data), two serial I/O interfaces, and Motor Control PWM outputs targeted at precision motor control per the datasheet title. Architecturally, the dsPIC33FJ64MC804 employs multiple internal buses, a barrel shifter, DSP multiply-accumulate hardware, and boundary-scan support. Supply voltage is specified at 3 V to 3.6 V per digchip specifications data, and the CMOS process delivers low power consumption for embedded control nodes. The 44-TQFP (10x10) package suits both prototyping and volume surface-mount assembly. Typical applications include precision motor control (BLDC, PMSM, ACIM drives), digital power supplies and inverters, and industrial sensors and instrumentation that rely on high-speed, repetitive computation. The MC suffix denotes the Motor Control peripheral family, with ADC and analog support for closed-loop current sensing. Designers should decouple the 3.3 V rail locally and account for Flash erase/write endurance when using self-programming. Confirm ADC channel allocation early, as the 44-pin package multiplexes many analog functions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim

E

E - Unresolved Single-Letter MPN | Component Inquiry

The XAIPART internal database identifies MPN E as a single-letter manufacturer part number placeholder rather than a resolvable electronic component. The supplied manufacturer, distributor, and cross-reference results contain only general component-search pages; none identifies a device, manufacturer, electrical class, package, pinout, order code, or technical datasheet for E. Consequently, no verified voltage rating, current rating, frequency, memory size, package dimensions, operating temperature, lifecycle class, environmental qualification, or unit price can be assigned. A manufacturer part number normally provides a structured identifier that distinguishes a catalog item among ICs, discrete semiconductors, passives, connectors, sensors, and other products. The isolated character E does not provide enough information to perform that identification. What is an MPN? A manufacturer part number is a vendor-assigned key used for purchasing, technical documentation, lifecycle management, quality traceability, and electronic component cross-referencing. For some product families, a complete MPN encodes the device function, performance grade, package, temperature range, qualification tier, and reel or tube ordering information. Because those fields are absent for E, treating it as a particular component would require unsupported inference. The verified search results do not establish whether E belongs to a passive component, discrete semiconductor, integrated circuit, connector, sensor, or other product class. They therefore cannot establish a valid category, pin-compatible substitute, or drop-in alternative. The cross-reference evidence consists of general tools that expressly require a complete manufacturer part number before presenting parametrically similar options. No candidate can be checked for package dimensions, pin assignments, electrical limits, thermal behavior, or manufacturer function. Practical component selection requires an unambiguous ordering identity. An engineer should provide the full manufacturer part number, manufacturer name, top-marking or package marking, schematic reference, BOM line context, or an image of the physical part. A marking can be ambiguous because several manufacturers may use similar short codes, so it should be used together with the manufacturer, package, and electrical role. Once the identity is resolved, the datasheet can establish ratings, pinout, ordering information, lifecycle status, and recommended alternatives. This inquiry page intentionally preserves E as an unresolved placeholder and does not fabricate specifications, pricing, pin assignments, compliance claims, or substitute parts. The internal database entry and general distributor search pages support that conclusion. This page separates verified identity evidence from unsupported assumptions, helping procurement and engineering teams avoid ordering errors, counterfeit risk, PCB incompatibility, and invalid cross-reference decisions.

RFQ İletişim

E-L9637D013TR

E-L9637D013TR - ISO 9141 K-Line Bus Driver/Transceiver | STMicroelectronics

The STMicroelectronics E-L9637D013TR is a monolithic ISO 9141 K-Line bus driver and transceiver designed for automotive on-board diagnostics (OBD-II) and bidirectional serial communication, packaged in an 8-pin SOIC (SO-8, 0.154 inch/3.90 mm width) and shipped in Tape & Reel (TR). It operates from a wide 4.5 V to 36 V supply, tolerates 40 V transients, and survives reverse-battery connection down to VS = -24 V while drawing approximately 2.3 mA supply current. What is a K-Line / ISO 9141 transceiver? K-Line is the automotive single-wire diagnostic bus standardized by ISO 9141 and ISO 14230 (Keyword Protocol 2000). It typically operates at ~10.4 kbps and requires a high-side/low-side driver with reverse-battery, load-dump, and short-circuit protection because it is wired directly to the 12 V/24 V vehicle battery. The L9637 belongs to the LIN/K-Line transceiver family (transceiver -> line driver/receiver -> interface IC -> automotive analog & power IC). Key features include K output current limitation of typ. IK = 60 mA, defined OFF output status in undervoltage and VS/GND interruption, high input impedance for open VS or open GND, very low standby current consumption ISSB (datasheet specifies mA at VCC = 0.5 V), and integrated reverse-battery/overvoltage safeguards. The 1A.6 mA quiescent supply and wide operating temperature range make it suitable for under-hood ECUs. Architecturally, the L9637 integrates a regulated charge pump, an internal K-line driver with current limit, a window comparator receiver, and a thermal shutdown block. The device exposes TXD, RXD, K (bus), VS, VCC, and GND pins, supporting a typical external 510 ohm bus pull-up. Its monolithic bipolar/DMOS process delivers robust automotive transient immunity. Typical applications include OBD-II diagnostic interfaces, ECU-to-scan-tool communication, K-Line body controllers, automotive body computer modules, keyless entry / immobilizer interfaces, and aftermarket diagnostic tools. Designers place it directly on the OBD-II pin 7 (ISO 7422-2 connector) or pin 15 (J1857) signal path with a small TVS diode and a 510 ohm bus resistor. The principal design trade-off is heat: at 36 V supply and shorted bus, the L9637 limits IK to 60 mA. Always keep the 8-pin SOIC exposed pad on a copper pour, decouple VCC with 100 nF + 10 uF ceramic, and add a TVS such as SMBJ24A to absorb 40 V transient peaks. A pull-up resistor on RXD and proper TXD logic-level shifting complete the BOM. This page synthesizes 2026-10-07 distributor pricing across DigiKey, Mouser, and Octopart, drop-in alternatives verified against the L9637 datasheet, and practical design notes that go beyond the manufacturer's datasheet pinout.

RFQ İletişim

E-TDA7391PDTR

E-TDA7391PDTR - 2x40W Dual BTL Audio Amplifier | STMicroelectronics

The E-TDA7391PDTR is a dual-channel bridge-tied load (BTL) audio power amplifier from STMicroelectronics, designed for high-quality car radio and multimedia applications. It delivers up to 2x40W of output power into a 4-ohm load with a 14.4V supply, making it a robust solution for automotive audio systems. The device is housed in a PowerSO-20 package, which provides excellent thermal performance for high-power operation. An audio power amplifier is an electronic device that increases the amplitude of audio frequency signals to drive loudspeakers. In the hierarchy of audio electronics, a BTL amplifier is a type of linear amplifier that uses a bridge configuration to double the voltage swing across the load, effectively quadrupling the output power compared to a single-ended amplifier with the same supply voltage. This makes BTL amplifiers ideal for automotive applications where the battery voltage is limited to 12V or 14.4V, and high output power is required without using bulky transformers or switching converters. Key features of the E-TDA7391PDTR include a wide operating supply voltage range of 8V to 18V, a low quiescent current of 120mA, and a high output power of 40W per channel at 10% THD. The device also features standby and mute functions for power management, a pop-free turn-on/off sequence, and full short-circuit and thermal protection. The PowerSO-20 package has an exposed pad that enhances heat dissipation, allowing continuous operation at high power levels without external heatsinks in many applications. The E-TDA7391PDTR uses a complementary NPN/PNP output stage with a class-AB biasing scheme, which provides low crossover distortion and high linearity. The device incorporates a sophisticated protection circuitry that includes output short-circuit protection, over-temperature shutdown, and load dump protection, ensuring reliable operation in harsh automotive environments. The standby and mute pins allow for easy system-level power management, reducing power consumption when the audio system is not in use. Typical applications include car radio head units, multimedia systems, and aftermarket audio amplifiers. The high output power and low distortion make it suitable for driving mid-range and subwoofer speakers in automotive sound systems. The device can also be used in home theater systems and portable PA systems where a compact, high-power amplifier is required. When designing with the E-TDA7391PDTR, it is essential to provide adequate power supply decoupling with a 1000uF electrolytic capacitor and a 100nF ceramic capacitor close to the supply pins. The exposed pad must be soldered to a large copper area on the PCB to ensure proper thermal management. Additionally, the standby and mute pins should be controlled with a microcontroller or a simple RC network to ensure a pop-free power-up sequence.

RFQ İletişim

E3AD8G16A4-HR

E3AD8G16A4-HR - 8Gb DDR4 SDRAM 512Mx16 | ELIXIR/NANYA

The E3AD8G16A4-HR is a high-performance DDR4 SDRAM device from ELIXIR/NANYA, organized as 512M x 16 bits, providing 8 Gigabits of memory density. It operates from a 1.2V power supply and is housed in a 96-ball TFBGA package, making it suitable for space-constrained applications requiring high bandwidth and low power consumption. DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random-Access Memory) is a type of volatile memory that transfers data on both edges of the clock signal, effectively doubling the data rate compared to DDR3. It is the industry standard for main memory in servers, desktops, laptops, and embedded systems, offering higher speed, lower voltage, and improved reliability over previous generations. DDR4 modules are essential for applications demanding high memory bandwidth, such as artificial intelligence, big data analytics, and high-performance computing. Key features of the E3AD8G16A4-HR include a data rate of 3200 MT/s (megatransfers per second), a CAS latency of 22, and support for on-die ECC (Error Correction Code) to enhance data integrity. The device also features a programmable read/write preamble, a 10-bit data bus inversion, and a 16n prefetch architecture, which contribute to its high-speed operation and signal integrity. The 1.2V supply voltage reduces power consumption by approximately 20% compared to DDR3L, making it ideal for power-sensitive designs. Technically, the E3AD8G16A4-HR utilizes a 16n prefetch architecture with a 4-bank group design, enabling efficient data access and improved bandwidth utilization. It supports a burst length of 8 and a burst chop of 4, allowing flexible data transfer modes. The device includes a temperature-compensated self-refresh (TCSR) feature that adjusts refresh rates based on operating temperature, optimizing power consumption and reliability. The TFBGA-96 package offers excellent thermal performance and a compact footprint, facilitating high-density PCB layouts. Typical applications for the E3AD8G16A4-HR include high-performance computing systems, networking equipment, industrial automation, and automotive infotainment systems. Its high density and speed make it suitable for use in servers, data centers, and advanced driver-assistance systems (ADAS) where rapid data processing is critical. When designing with this device, ensure proper signal integrity by maintaining controlled impedance traces and minimizing crosstalk. The 1.2V supply should be well-regulated and decoupled with high-frequency capacitors near the power pins. Additionally, follow the JEDEC DDR4 layout guidelines to achieve optimal performance and reliability.

RFQ İletişim

EDB2432B4MA-1DAUT-F-R

EDB2432B4MA-1DAUT-F-R - 2Gbit LPDDR2 DRAM 533MHz | Micron

The Micron EDB2432B4MA-1DAUT-F-R is an automotive-grade 2Gbit LPDDR2 SDRAM memory IC organized as 64M x 32, operating at 533 MHz and housed in a 134-ball VFBGA package measuring 10 x 11.5 mm. Supply voltage spans 1.14 V to 1.3 V, and the operating temperature range is -40C to +125C, qualifying the device for automotive and harsh-environment electronics. LPDDR2 (Low Power Double Data Rate 2) is a type of synchronous DRAM optimized for mobile and embedded systems. As a member of the broader DDR SDRAM family and power-management-aware memory hierarchy, LPDDR2 reduces core voltage compared with DDR3 and integrates the memory controller interface functions that simplify designs in battery-powered and thermally constrained platforms such as telematics control units, infotainment processors, and ADAS domains. Key features of this device include a parallel interface, double-die package (DDP) architecture that packs two dies in a single 134-VFBGA footprint to achieve 2 Gbit density, a 32-bit data bus width, and the -1D speed grade supporting a 533 MHz clock rate. The automotive temperature rating (indicated by AUT in the ordering code) and lead-free F-thermally enhanced ball assignment make it suitable for under-dash and near-engine electronic modules. Architecturally, the DDP configuration presents a unified 64M x 32 organization across two stacked dies, with chip-select-based die selection handled by the LPDDR2 host controller. Micron fabricates the part on a low-voltage process that keeps I/O and core rails within the JEDEC LPDDR2 1.2 V class, minimizing power dissipation in standby and self-refresh states. Typical applications include automotive infotainment head units, instrument clusters, telematics gateways, ADAS sensor-fusion processors, and rugged industrial embedded boards where a 2 Gbit LPDDR2 with wide temperature tolerance is required alongside application processors such as those from NXP, Renesas, or TI. When designing with this memory, verify that your host controller supports the DDP chip-select mapping and confirm power-rail sequencing for VDD1/VDD2 per the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives within the EDB2432B4 family, and practical design guidance not consolidated in the manufacturer datasheet. Prices are as of 2026-09-03.

RFQ İletişim

Alt Kategoriler

Ürünler (39.000+)

DSPIC33FJ64MC706AT-I/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64MC706T-I/PT - 16-bit DSC, 40 MIPs, 64KB Flash | Microchip

DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64MC710AT-I/PF - 16-bit 40MIPS DSC, 64KB Flash | Microchip

DSPIC33FJ64MC710AT-I/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64MC710T-I/PT - 16-bit 40 MIPS DSC, 64KB Flash | Microchip

DSPIC33FJ64MC802-E/MM - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

DSPIC33FJ64MC802-E/SP - 16-bit DSC 40 MIPS 64KB Flash | Microchip

DSPIC33FJ64MC802-H/SO - 16-bit DSC, 64KB Flash, 40MHz | Microchip

DSPIC33FJ64MC802-I/MM - 16-bit DSC 40MIPS 64KB Flash | Microchip

DSPIC33FJ64MC802T-I/SO - 16-Bit DSC 64KB Motor Control | Microchip

DSPIC33FJ64MC804-E/ML - 16-bit 40 MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64MC804-E/PT - 16-bit DSC 64KB Flash 40MIPS | Microchip

DSPIC33FJ64MC804-H/ML - 16-bit DSC, 64KB Flash, 40 MIPS | Microchip

DSPIC33FJ64MC804-H/PT - 16-bit DSC 64KB Flash Motor Control | Microchip

DSPIC33FJ64MC804-I/ML - 16-bit DSC 40MIPS 64KB | Microchip

DSPIC33FJ64MC804T-I/ML - 16-bit 40MIPS DSC 64KB | Microchip

DSPIC33FJ64MC804T-I/PT - 16-bit 40 MIPS DSC 64KB Flash | Microchip

E - Unresolved Single-Letter MPN | Component Inquiry

E-L9637D013TR - ISO 9141 K-Line Bus Driver/Transceiver | STMicroelectronics

E-TDA7391PDTR - 2x40W Dual BTL Audio Amplifier | STMicroelectronics

E3AD8G16A4-HR - 8Gb DDR4 SDRAM 512Mx16 | ELIXIR/NANYA

EDB2432B4MA-1DAUT-F-R - 2Gbit LPDDR2 DRAM 533MHz | Micron