Ürünler (44.000+)

EP4CE10F17C8LN - 10,320 Logic Element FPGA | Altera
EP4CE10F17C8LN

EP4CE10F17C8LN - 10,320 Logic Element FPGA | Altera

The Altera Corporation EP4CE10F17C8LN is a Cyclone IV E field-programmable gate array with 10,320 logic elements, 47 logic blocks, 414 Kb of block RAM, and a 1.2 V core supply in a 256-terminal F17 flip-chip ball grid array package measuring 17 mm by 17 mm. It operates from 0°C to 85°C and supports a nominal 1 V FPGA supply range of 0.97 V to 1.03 V. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic blocks, embedded memory, and configurable input/output resources. The Cyclone IV E family occupies the FPGA category within programmable logic devices and targets cost-sensitive embedded systems requiring flexible parallel processing, interface adaptation, and hardware acceleration without application-specific mask fabrication. The EP4CE10F17C8LN uses 60 nm process technology and provides 179 configurable I/O positions according to distributor product data. Its 256-terminal package uses a 1 mm ball pitch, supporting compact board layouts while providing high-density I/O access. The device combines 10,320 logic elements with 414 Kb of block RAM, allowing moderate amounts of parallel logic, data buffering, lookup tables, and state-machine functions to be implemented on one device. The F17 package designation identifies the 17 mm by 17 mm FBGA outline. The commercial-temperature suffix supports operation from 0°C to 85°C, while the lead-free construction is identified in product specifications. These characteristics make the device appropriate for industrial control, communications, instrumentation, embedded processing, and general-purpose programmable-logic designs where a 256-ball footprint is acceptable and the logic capacity matches the design requirement. Typical uses include parallel data acquisition, protocol bridging, motor and motion control, programmable instrumentation, sensor aggregation, and low-cost embedded control. Engineers can implement multiple finite-state machines, buffer data between subsystems, accelerate repetitive operations, or customize I/O behavior. Designs requiring substantially more logic, memory, clock resources, high-speed transceivers, or user-programmable RAM should use a larger FPGA rather than force the EP4CE10F17C8LN beyond its resource limits. Power, decoupling, clocking, and configuration determine whether the device operates reliably. Follow the manufacturer’s recommended power-supply topology, place decoupling capacitors close to the relevant supply pins, provide a clean clock source, and verify JTAG configuration and I/O standards against the board-level design. The 1 mm-pitch FBGA also requires careful PCB design, including appropriate pad geometry, solder mask, thermal relief, and assembly process control. This product overview combines the manufacturer ordering information, package and electrical specifications, resource details, strict same-footprint alternatives, and practical implementation guidance to support component selection, PCB planning, and sourcing decisions.

RFQ İletişim
EP4CE10F17C8N - Cyclone IV E FPGA, 10K LEs, 256-FBGA | Altera
EP4CE10F17C8N

EP4CE10F17C8N - Cyclone IV E FPGA, 10K LEs, 256-FBGA | Altera

The Altera EP4CE10F17C8N is a Cyclone IV E field-programmable gate array (FPGA) featuring 10,320 logic elements (LEs), 423,936 bits of embedded memory, and 179 maximum user I/O pins, housed in a 256-ball FineLine BGA (F17, 17x17 mm) package. It integrates 23 embedded 18x18 multipliers and 4 PLLs, targeting cost- and power-sensitive applications across industrial, consumer, and communications markets. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs) connected via programmable interconnect. Unlike an ASIC, the FPGA's logic function, I/O behavior, and routing are defined by a configuration bitstream loaded after manufacture, enabling rapid prototyping and field upgrades. FPGAs sit within the broader taxonomy: programmable logic device (PLD) -> FPGA -> SRAM-based FPGA (the Cyclone IV E is SRAM-based, requiring an external configuration memory). Key features include 10,320 LEs, 414 Kbits of embedded memory (M9K blocks), 23 dedicated 18x18 hardware multipliers (~46 GMACs of DSP throughput), four general-purpose PLLs, and 179 user I/Os with support for LVDS, LVTTL, LVCMOS, SSTL, and other single-ended/differential I/O standards. The device operates from a 1.15 V to 1.25 V core supply with separate VCCIO banks (1.2 V to 3.3 V). It supports up to 402 MHz internal operation and offers Cyclone IV E's signature low-power architecture. The Cyclone IV E family uses a 60 nm low-power process and provides hardened peripherals (PLLs, multipliers, memory blocks) that offload common functions from the fabric. Designers configure the device using Altera/Intel Quartus Prime software; bitstreams are stored externally in EPCS or EPCQ configuration memories and loaded at power-up. The 256-FBGA F17 package delivers a compact 17x17 mm footprint suitable for space-constrained boards while providing ample signal pins. Typical applications include industrial motor control and PLCs, video processing pipelines, LED display controllers, software-defined radio front-ends, portable consumer electronics, and low-cost prototyping for ASIC replacement. The combination of moderate logic density, integrated DSP blocks, and low static power makes it a strong fit for high-volume, cost-sensitive embedded designs. When designing with this device, ensure your power tree supplies the 1.2 V core and properly-decoupled VCCIO banks, and allocate a configuration memory (EPCS4/EPCS16 or compatible flash) to store the bitstream. Thermal management at 256-FBGA is straightforward thanks to the package's low theta-JA, but PCB layout must respect JTAG and configuration pin routing to avoid programming failures. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design considerations beyond the manufacturer datasheet, helping engineers evaluate whether EP4CE10F17C8N fits their cost, performance, and supply-chain constraints.

RFQ İletişim
EP4CE10F17C9L - 10,320-Cell Cyclone IV E FPGA | Altera
EP4CE10F17C9L

EP4CE10F17C9L - 10,320-Cell Cyclone IV E FPGA | Altera

Altera EP4CE10F17C9L is a Cyclone IV E field-programmable gate array with 10,320 logic cells, 47 logic blocks, 179 I/O, and a 1.2 V supply in a 256-LBGA package. It combines programmable logic, embedded memory, and configurable digital interfaces in a surface-mount FPGA designed for compact control, communications, and signal-processing systems. A field-programmable gate array is a semiconductor whose digital functions are defined after fabrication through a configuration bitstream. Within the device hierarchy, an FPGA belongs to the broader category of programmable logic devices and semiconductor ICs. Instead of relying on fixed application-specific circuitry, engineers can configure logic blocks, routing networks, memory blocks, and I/O standards to implement control functions, data paths, or interface bridging on one integrated circuit. The EP4CE10 device contains 10,320 logic cells organized into 47 logic blocks, providing 179 user I/O in the selected package. Its 1.2 V core supply and 60 nm process generation place it in the Cyclone IV E family. The F17 package designation identifies the package used by this ordering code, while the 256-ball surface-mount construction supports dense PCB routing and automated assembly. These characteristics make the device useful when programmable logic provides faster design iteration than application-specific logic. The combination of 47 logic blocks and 179 I/O supports parallel control logic, protocol interfaces, data acquisition, and general-purpose embedded logic. Because an FPGA is configured rather than permanently programmed, the same PCB can be adapted when interface requirements or firmware behavior change. Designers should still validate timing, voltage levels, configuration startup, and I/O standards against the manufacturer datasheet before releasing production hardware. Typical uses include industrial automation, industrial networking, video and image processing, communication infrastructure, instrumentation, and embedded control. The high I/O count is particularly useful for bus aggregation, status and control signaling, sensor interfaces, and designs that need several independently configurable digital channels. The 256-LBGA package also demands careful PCB layout, thermal analysis, and assembly process control. The primary design consideration is power and signal integrity. Keep high-current and sensitive-routing requirements separate, use the recommended decoupling arrangement, and confirm the exact I/O voltage domains, configuration method, and unused-ball constraints in the pin-description and power-supply sections of the Cyclone IV E device datasheet. Use the manufacturer pin-assignment guidance when assigning every ball. This product page combines device identity, package information, lifecycle and compliance fields, sourcing guidance, drop-in ordering alternatives, and engineering-focused selection notes. It is designed to help designers identify whether the EP4CE10F17C9L matches the required logic density, I/O capacity, package, and system-level implementation constraints.

RFQ İletişim
EP4CE10F17C9LN - 10,320-Cell FPGA, 179 I/O | Intel | F17
EP4CE10F17C9LN

EP4CE10F17C9LN - 10,320-Cell FPGA, 179 I/O | Intel | F17

Intel EP4CE10F17C9LN is a Cyclone IV E field-programmable gate array with 10,320 logic cells, 179 I/O, and 423,936 embedded memory bits, manufactured on 60 nm technology and supplied in a 256-pin FBGA package. It operates from a 1.2 V core supply and is designed for embedded control, interface bridging, industrial automation, communications, and image-processing systems. A field-programmable gate array is a semiconductor whose digital logic and interconnect resources are configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device, while the Cyclone IV E family combines configurable logic, memory, and general-purpose I/O in one device. This makes the EP4CE10F17C9LN suitable when a design needs flexible hardware behavior, rapid board revisions, or parallel processing that would be costly to implement with fixed-function logic. The device provides 10,320 logic cells, 179 I/O, and 423,936 bits of RAM-like embedded memory. Its 60 nm process technology supports a compact, power-conscious implementation compared with larger programmable-logic families. The 256-pin FBGA package also exposes substantially more interface options than a small leaded package, making it practical for parallel data acquisition, multiple serial links, external memory interfaces, and general-purpose control logic. The C9 ordering suffix identifies this exact commercial configuration within the EP4CE10 F17 family. Its pin count, package family, and device density support direct PCB footprint planning, while the actual pin assignments depend on the Quartus design and the device pin-connection tables. Engineers should confirm speed grade, temperature grade, supported I/O standards, bank voltage restrictions, configuration scheme, and power requirements against the Cyclone IV E device datasheet before releasing a production board. Typical uses include industrial control modules, programmable logic controllers, data-acquisition equipment, communications gateways, embedded vision, and general-purpose digital signal-processing systems. The device is particularly useful where parallel logic, multiple external interfaces, and configuration flexibility are required within a modest logic-cell budget. PCB design should preserve the manufacturer's recommended power and ground-plane arrangement, place decoupling capacitors close to supply pins, and route sensitive or high-speed signals with controlled impedance. Configuration signals must also follow the documented startup procedure so that the FPGA reaches a valid operating state reliably. This product page combines the exact ordering information, package and density characteristics, practical application guidance, order-code alternatives, and PCB-focused design notes to support faster component selection and design review.

RFQ İletişim
EP4CE10F17I7 - 10K Logic FPGA, FBGA-256 | Altera
EP4CE10F17I7

EP4CE10F17I7 - 10K Logic FPGA, FBGA-256 | Altera

The Altera EP4CE10F17I7 is a Cyclone IV E field-programmable gate array with 10,320 logic elements, 256 FBGA terminals, and a 1.2 V supply in the F17 package. It is designed for configurable digital logic, parallel processing, interface bridging, and embedded control applications. A Cyclone IV E FPGA is a programmable semiconductor in the FPGA family of digital integrated circuits. Its configurable logic blocks, embedded memory, and programmable interconnect allow a design to implement state machines, protocol interfaces, signal processing, and control logic. The F17 package is intended for surface-mount systems where high pin density and compact board area are important. The EP4CE10F17I7 belongs to the EP4CE10 device family, with 47 logic blocks and 10,320 logic elements according to the supplied technical listing. Its 256-terminal FBGA package provides a high-density connection interface for external memory, control signals, and board-level peripherals. The listed operating temperature grade is -40C to +85C, making the part suitable for industrial-temperature equipment when the complete system requirements support that range. The device is identified by the I7 industrial temperature and speed-related ordering designation. Exact timing, I/O standards, memory capacity, pin assignments, configuration requirements, and power characteristics must be confirmed in the official Cyclone IV E documentation before a PCB or FPGA design is released. Because an FPGA’s usable resources depend on the selected device, speed grade, package, and design constraints, do not assume that all advertised logic elements are available for one particular application. Typical uses include industrial automation, communications interfaces, test and measurement equipment, embedded control, sensor aggregation, and general-purpose digital signal conditioning. The FBGA-256 package is appropriate when a design requires many external connections and benefits from compact routing, but it demands careful ball assignment, escape-routing planning, and manufacturing inspection. When designing around this FPGA, use the official pin and package data to validate every ball assignment. Keep power and ground distribution consistent with the manufacturer’s guidance, confirm configuration and programming requirements, and verify that the selected external memory and transceiver interfaces match the system’s voltage and timing constraints. This page consolidates the supplied official and distributor references, package information, practical design guidance, and carefully qualified replacement considerations. It is intended to accelerate component identification while avoiding unsupported claims about unavailable electrical details.

RFQ İletişim
EP4CE10F17I7N - 10,320 Logic Element Industrial Cyclone IV E FPGA
EP4CE10F17I7N

EP4CE10F17I7N - 10,320 Logic Element Industrial Cyclone IV E FPGA

Altera Corporation EP4CE10F17I7N is a Cyclone IV E field-programmable gate array with 10,320 logic elements, 179 I/O, and 414 Kb of block RAM in the F17 256-LBGA package measuring 17 mm × 17 mm. The device is identified as speed grade 7 and is intended for industrial-temperature operation. A field-programmable gate array is a reconfigurable digital semiconductor that belongs to the programmable-logic device hierarchy alongside CPLDs. Its configurable logic blocks, memory resources, and programmable I/O allow engineers to implement digital control, signal processing, interface bridging, and protocol-conversion functions in one integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured during development and often throughout field operation. The EP4CE10F17I7N combines 10,320 logic elements with 179 I/O, providing a compact platform for control logic, industrial communications, data acquisition, and embedded system interfacing. Its 414 Kb of block RAM supports buffering, packet storage, and data-retention functions without requiring an external memory device for many designs. The 256-LBGA F17 package supports dense board routing while requiring careful escape-routing and thermal-analysis practices. The “F17” portion identifies the 17 mm × 17 mm package option, while “I7” identifies the industrial-temperature and speed-grade ordering option documented for this variant. The trailing “N” is an ordering suffix associated with the exact EP4CE10F17I7N configuration. Engineers should use the manufacturer’s ordering-information table to confirm every package, temperature, and speed-grade suffix before substituting a variant. Typical uses include industrial control modules, programmable I/O systems, communications gateways, test equipment, and embedded instrumentation. For these applications, the combination of 10,320 logic elements, 414 Kb of block RAM, and 179 I/O allows multiple digital functions to be consolidated on a compact PCB. Designs must still account for the exact I/O standards, supported interfaces, clocking resources, and power requirements listed for the selected device in the manufacturer documentation. PCB implementation requires continuous routing from the 256-LBGA footprint, short return paths for supply and ground planes, and placement of decoupling capacitors close to the power balls. Because the industrial junction-temperature range reaches 100 °C, thermal verification should include worst-case ambient temperature, activity factor, power consumption, and PCB copper conditions. This product page combines the exact ordering-part-number characteristics with practical FPGA design guidance, documented drop-in family candidates, and design trade-offs. The comparison and application guidance help engineers determine whether the EP4CE10F17I7N fits the required logic density, memory capacity, I/O count, package, and thermal environment without overlooking device-specific constraints.

RFQ İletişim
EP4CE10F17I8L - Cyclone IV E FPGA, 256-LBGA | Altera
EP4CE10F17I8L

EP4CE10F17I8L - Cyclone IV E FPGA, 256-LBGA | Altera

The Altera EP4CE10F17I8L is a Cyclone IV E FPGA in a 256-LBGA package, combining programmable logic, embedded memory, and configurable digital interface resources in a single device. It is intended for industrial, communications, consumer, and embedded systems that require reconfigurable logic rather than a fixed application-specific integrated circuit. The device belongs to the Cyclone IV E family and is identified by the EP4CE10F17I8L ordering part number. A field-programmable gate array is a semiconductor device whose digital functions are configured after manufacture using a programmable logic array. In the broader device hierarchy, an FPGA is a programmable semiconductor, a form of logic IC, and a practical alternative to a custom ASIC when design requirements change or production volumes are moderate. Its configuration memory allows logic, control, interface, and signal-processing functions to be updated without replacing the physical component. The EP4CE10F17I8L is packaged in a 256-LBGA configuration suitable for compact board layouts with fine-pitch interconnects. The I8 ordering suffix identifies an industrial-oriented variant, while the F17 designation identifies the device speed and package-related ordering configuration. Exact logic-element count, embedded-memory capacity, I/O count, supply-voltage values, operating-temperature limits, and performance timing should be confirmed in the Cyclone IV E device handbook and the EP4CE10F17I8L product documentation before release to production. Typical uses include industrial control and monitoring, serial-interface bridging, general-purpose data acquisition, embedded communication equipment, video and image processing, and custom accelerator logic. The same physical package used by the F17 device family makes careful footprint and pin-assignment review essential when comparing different ordering codes. For a new design, treat the ordering code, package ball map, voltage requirements, configuration method, and memory initialization behavior as a matched set. Confirm the exact pin assignments for every used ball against the manufacturer pin-connection table, and verify that the power rails, decoupling network, configuration interface, clocking, and I/O standards satisfy the board-level design. This product record combines the exact manufacturer ordering identity, package information, distributor listing references, and application-oriented engineering guidance. It emphasizes the checks that matter during schematic capture, PCB layout, programming, and sourcing so that the FPGA is selected and integrated as a complete system component rather than by family name alone.

RFQ İletişim
EP4CE10F17I8LN - 10,320-Cell FPGA | Altera | Cyclone IV E
EP4CE10F17I8LN

EP4CE10F17I8LN - 10,320-Cell FPGA | Altera | Cyclone IV E

Altera EP4CE10F17I8LN is a Cyclone IV E field-programmable gate array with 10,320 logic cells, a 1.2 V supply, and a 256-pin FBGA package. The device uses 60 nm process technology and is identified by the F17 package designation within the EP4CE10 family. Its industrial-grade ordering code supports applications requiring a programmable logic platform in a compact surface-mount package. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and input/output behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides reconfigurable parallel hardware for digital control, interface, signal-processing, and embedded-system functions. Compared with a fixed ASIC, an FPGA allows design revisions to be implemented through configuration files rather than a new photolithography cycle. Key device characteristics include 10,320 logic cells, a 1.2 V core supply, and a 256-pin FBGA package. The 256 contacts support power distribution, configuration, user I/O, and other device functions according to the Cyclone IV E pin definition. The package is supplied in a tray configuration for production assembly. Its 60 nm process generation places the device within the Cyclone IV E family, whose architecture combines programmable logic elements with dedicated resources for common control, communications, memory, and signal-processing tasks. The EP4CE10F17I8LN is suitable for industrial control systems, sensor aggregation, communication interfaces, protocol conversion, embedded test equipment, and general-purpose digital logic. Designers can use a hardware description language and an Intel or Altera FPGA development flow to synthesize, place, route, and program the design. The final system must account for configuration flash or another boot source, clocking, decoupling, bank voltage requirements, signal integrity, thermal performance, and the pin limitations of the F17 package. Because pin multiplexing and I/O standards are package-specific, the F17 pin-information file and manufacturer datasheet should be used during schematic capture and PCB layout. Do not assume that a different Cyclone IV E package has the same ball assignments. The device name is only suitable for a drop-in replacement if the candidate retains the same EP4CE10 die, F17 256-pin FBGA footprint, core voltage, configuration behavior, and supported I/O characteristics. This page combines the manufacturer product identity with package, process, supply-voltage, logic-capacity, and lifecycle information. It also identifies the important distinction between electrically similar ordering variants and genuinely drop-in alternatives: commercial-temperature or grade differences may preserve the footprint but can still prevent an unrestricted substitution in a qualified production design.

RFQ İletişim
EP4CE10U14I7N - 10,320-Cell Cyclone IV E FPGA | Altera
EP4CE10U14I7N

EP4CE10U14I7N - 10,320-Cell Cyclone IV E FPGA | Altera

The Altera EP4CE10U14I7N is a Cyclone IV E field-programmable gate array with 10,320 logic elements, 1.2 V core supply, and 60 nm fabrication technology, packaged in a 256-pin UFBGA configuration. The industrial-temperature ordering code and U14 package identify a low-cost FPGA option for embedded control, signal processing, communications, and industrial equipment. An FPGA is a programmable semiconductor containing configurable logic blocks, embedded memory, input/output resources, and programmable interconnect paths. The FPGA hierarchy extends from configurable logic to programmable logic arrays, field-programmable gate arrays, and semiconductor devices. Unlike a fixed-function controller, an FPGA can implement parallel datapaths, protocol handling, and timing-sensitive logic in one integrated circuit. The EP4CE10 device family provides 10,320 logic elements and 423,936 embedded-memory bits according to the Altera product listing. Its 1.2 V core operation and 60 nm process technology position it as a compact, energy-efficient programmable logic solution. The 256-pin UFBGA package supports dense board layouts while requiring careful via-in-pad, solder-mask, and thermal-management practices during assembly. Cyclone IV E devices use configurable logic elements and embedded RAM to implement parallel architectures efficiently. This architecture is useful when data arrives on multiple interfaces or when an algorithm requires simultaneous operations. Fixed pipeline latency can make the FPGA suitable for communication links, control loops, instrumentation, and interface bridging, provided the design is constrained and timing closure is verified. Typical uses include industrial control modules, programmable logic controllers, sensor and data-acquisition systems, communication interfaces, and embedded video processing. A design can combine control logic, protocol conversion, and data filtering in one FPGA, reducing component count compared with a multi-chip implementation. Industrial deployments should verify the complete system timing, temperature range, and power budget. The most important PCB consideration is the BGA escape strategy. Follow the package drawing for pad geometry, solder-mask opening, via dimensions, and assembly land pattern. Decoupling and power planning must account for dynamic current changes during configuration and logic activity; use multiple supply connections and a quiet ground reference where the board stack-up permits. This product page combines the exact device identity and package information with practical selection guidance, application context, and a same-package comparison focused on the decisions engineers must make before replacing an EP4CE10U14I7N.

RFQ İletişim
EP4CE1152F23C7N - Cyclone IV E 115K LE FPGA, FBGA-484 | Altera
EP4CE1152F23C7N

EP4CE1152F23C7N - Cyclone IV E 115K LE FPGA, FBGA-484 | Altera

The Altera EP4CE1152F23C7N is a high-density Cyclone IV E FPGA delivering 114,480 logic elements, 3.9 Mbits of embedded memory, and 266 dedicated 18x18 multipliers in a 484-ball FineLine BGA package. Built on a low-power 60nm process, it targets cost-sensitive, high-volume applications requiring substantial logic, DSP, and memory resources without the power budget of a Cyclone III LS or Stratix device. A Field-Programmable Gate Array (FPGA) is a programmable logic device that lets engineers implement arbitrary digital circuits - from simple glue logic to full processor systems - in silicon-reprogrammable logic fabric. Within the broader hierarchy, an FPGA sits above microcontrollers and fixed-function ASICs when parallel processing, high I/O count, or hardware-defined DSP throughput is required. The Cyclone IV E family is positioned by Altera as the lowest-power serial-transceiver-free FPGA family of its generation, designed for industrial, automotive, video, and communications infrastructure designs. Key features include 432 user I/Os, 4 PLLs, 20 global clock networks, and support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, and operates from a 1.0V core with separate bank I/O voltages. Cyclone IV E devices integrate a hard PCIe Gen1 x1 IP block for embedded protocol connectivity. Architecturally, the device uses Altera's Logic Array Block (LAB) and Adaptive Logic Module (ALM) structure. Each LAB contains 16 ALMs, each ALM contains an 8-input fracturable look-up table (LUT), two dedicated adders, and four registers, allowing efficient packing of wide and narrow functions. Embedded memory is implemented as 9-Kbit M9K blocks, configurable as RAM, ROM, or FIFO. Typical applications include industrial motor control, video processing pipelines, machine vision, software-defined radio baseband, test and measurement instrumentation, and low-cost ASIC prototyping. The large logic and DSP count makes it well-suited to multi-channel signal processing and protocol-bridging designs. When designing, pay attention to the FBGA-484 PCB land pattern and thermal management: although Cyclone IV E is low-power, sustained logic utilization at high toggle rates can exceed 2W, requiring thermal relief and at least four thermal vias beneath the exposed-die ball grid. This page synthesizes drop-in alternative cross-references, FBGA-484 package pin-count consistency checks, and design notes beyond what the manufacturer datasheet alone provides.

RFQ İletişim
EP4CE115F23C8N - Cyclone IV E FPGA 114K LE 484-BGA | Intel
EP4CE115F23C8N

EP4CE115F23C8N - Cyclone IV E FPGA 114K LE 484-BGA | Intel

The Intel EP4CE115F23C8N is a Cyclone IV E Field Programmable Gate Array (FPGA) housed in a 484-ball FineLine BGA package, delivering 114,480 logic elements, 280 user I/Os, and 3,981,312 bits of embedded memory (approximately 3.8 Mbits) on a low-power 60 nm process. It is the largest density option in the Cyclone IV E family, designed for cost-sensitive, high-volume applications that still require substantial logic capacity. A Field Programmable Gate Array (FPGA) is a reconfigurable semiconductor device whose logic fabric, routing, and I/O cells can be programmed by the customer after manufacture. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs), alongside simpler CPLDs, and above fixed-function ASICs in design flexibility. The Cyclone IV E family targets the mid-density segment, balancing cost, power, and performance for industrial, consumer, and communications designs. Key features of the EP4CE115F23C8N include 114,480 logic elements arranged in an architecture of adaptive logic modules (ALMs), 432 embedded 18x18 multipliers for DSP-style signal processing, 280 general-purpose I/Os supporting LVDS, LVCMOS, SSTL, and other single-ended and differential standards, and dedicated embedded memory blocks totaling 3.8 Mbits. The device supports up to four general-purpose PLLs for clock management and serialization. The Cyclone IV E architecture uses a 60 nm low-power process with a 1.2 V core supply, achieving substantially lower static and dynamic power than the previous Cyclone III generation. Configuration is supported via passive serial (PS), fast passive parallel (FPP), and JTAG modes using industry-standard SRAM-based programming cells. The 484-BGA FineLine BGA package offers a 1.0 mm ball pitch, suitable for multilayer PCBs in mid-to-high-complexity designs. Typical applications for the EP4CE115F23C8N include industrial motor control and machine vision, video processing and display bridges, telecom line cards, automotive driver-assistance pre-processing, and embedded control in test and measurement equipment. The combination of high logic density, embedded multipliers, and rich I/O makes it well-suited for designs that previously required larger or more expensive FPGAs. When designing with this device, plan power decoupling around each PLL region and use the Quartus II / Quartus Prime toolchain for synthesis, place-and-route, and timing closure. Verify signal-integrity on high-speed LVDS pairs and confirm ball-pattern compatibility against any proposed migration part before PCB respin. This page synthesizes distributor pricing, package information, drop-in alternatives, and design considerations not found in a single manufacturer datasheet, helping engineers evaluate the EP4CE115F23C8N for new designs or as a replacement candidate in legacy projects.

RFQ İletişim
EP4CE115F23I7N - 114K LE Cyclone IV E FPGA, 484-FBGA | Intel
EP4CE115F23I7N

EP4CE115F23I7N - 114K LE Cyclone IV E FPGA, 484-FBGA | Intel

The Intel / Altera EP4CE115F23I7N is a high-density Cyclone IV E field-programmable gate array (FPGA) with 114,480 logic elements, 3,981,312 bits of embedded memory, and 280 user I/Os, housed in a 484-ball fine-pitch BGA package. It operates from a 1.0 V core supply (with 1.2 V/2.5 V/3.3 V I/O banks) and is rated for the industrial temperature range (-40C to +100C), targeting cost-sensitive high-volume applications that still require significant logic capacity. A Field-Programmable Gate Array (FPGA) is a semiconductor device containing programmable logic blocks, interconnect, and I/O that can be configured by the customer after manufacture to implement custom digital circuits. Cyclone IV E is positioned in the low-power, low-cost tier of the Altera (now Intel) FPGA portfolio: FPGA -> programmable logic -> programmable logic IC -> semiconductor. Compared with SRAM-based FPGAs of older generations, the Cyclone IV E family integrates hard memory controllers, PLLs, and multipliers to reduce system BOM cost and power. Key features include 114,480 logic elements, 3,981,312 bits (388 Kbits per the family datasheet) of embedded SRAM, 280 maximum user I/Os, 4 general-purpose PLLs, 266 hardware multipliers (18x18), and dedicated high-speed serial interfaces absent in this family. Configuration is via JTAG (IEEE 1149.1) or active serial/parallel flash. The device supports the Quartus Prime design software across Windows and Linux hosts, including the free Quartus Prime Lite edition. The EP4CE115F23I7N uses a 60 nm TSMC low-power process and offers static power as low as a fraction of a watt in well-quiesced designs. The 484-FBGA package integrates a large number of I/Os and a substantial thermal pad, enabling fan-less operation in many industrial designs if power budgeting is performed carefully. The family supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards. Typical applications include industrial motor control, factory automation controllers, video surveillance and image processing pipelines, LED video walls, software-defined radio baseband pre-processing, point-of-sale terminals, and embedded vision. The wide operating temperature range and large logic capacity suit designs that previously required mid-range FPGAs at higher cost. When designing with this device, run a Quartus Prime power estimation early in the design cycle and confirm the FBGA escape routing on at least 6 PCB layers. The 484-FBGA F23 package has a 1.0 mm ball pitch, which demands impedance-controlled stack-up and via-in-pad or dog-bone fanout for reliable assembly. This page synthesizes distributor pricing, drop-in Cyclone IV E variants, and design considerations beyond the manufacturer datasheet to help engineers select and source the EP4CE115F23I7N confidently.

RFQ İletişim
EP4CE115F23I8LN - Cyclone IV E FPGA, 114K LE, 484-FBGA | Intel
EP4CE115F23I8LN

EP4CE115F23I8LN - Cyclone IV E FPGA, 114K LE, 484-FBGA | Intel

The Intel (formerly Altera) EP4CE115F23I8LN is a high-density Cyclone IV E field-programmable gate array (FPGA) built on a 60 nm low-power process, integrating 114,480 logic elements, 3,981,312 bits of embedded memory, and 280 user I/O pins into a 484-ball FineLine BGA (FBGA-484, 23x23 mm, 1.0 mm pitch) package. It operates from a 1.0 V/1.2 V core supply with PLL and I/O bank rails, targeting cost-sensitive, power-conscious designs that require mid-range FPGA fabric. The device is rated for the industrial temperature range (-40C to +100C) and is lead-free / RoHS compliant. An FPGA (Field-Programmable Gate Array) is a programmable logic device consisting of an array of configurable logic blocks (CLBs / LEs), embedded memory blocks, DSP blocks, phase-locked loops (PLLs), and programmable I/O, all connected by a flexible routing fabric. FPGAs occupy a unique position in the digital design hierarchy: above fixed-function ASICs in flexibility, below microcontrollers in predictability, and parallel-by-construction for high-throughput DSP and video pipelines. The Cyclone IV E family specifically targets low-power, high-volume applications with transceivers implemented in soft logic rather than dedicated SERDES hardware. Key features of the EP4CE115F23I8LN include 7,155 logic array blocks (LABs/CLBs), 4 general-purpose PLLs, 66 embedded 18x18 multipliers supporting up to ~250 MHz DSP throughput, and 432 Kbits of distributed RAM plus 3.88 Mbits of embedded block RAM. The device supports multiple I/O standards (LVDS, LVCMOS, SSTL, HSTL) and offers configuration via JTAG, active serial, or fast passive parallel modes. Unlike Cyclone IV GX, this "E" variant omits dedicated transceivers, keeping die cost low while still providing sufficient fabric for video bridging, motor control, and industrial Ethernet bridges. Architecturally, the EP4CE115F23I8LN uses a 4-input lookup table (LUT4) based logic element with dedicated carry chains for arithmetic, dedicated multiplier blocks for DSP, and M9K memory blocks (9 Kbit each) for efficient buffering. The four PLLs provide up to 12 output counters each, supporting fractional frequency synthesis for video clocks and high-speed SERDES implemented in soft logic. Configuration data is held in flash-free volatile SRAM, requiring an external configuration memory such as EPCQ or EPCS devices on every board. Typical applications include industrial machine vision, motor and motion control, video surveillance and image processing, low-cost software-defined radio front-ends, point-of-sale terminals, and factory automation controllers. The 484-BGA package enables dense routing for high I/O count designs while maintaining a 1.0 mm pitch suitable for standard 4-layer PCB manufacturing. When designing with this device, pay close attention to power sequencing of VCCINT (1.0/1.2 V core) and VCCIO (I/O bank) rails, and always include an external configuration memory plus proper JTAG chain access for in-field updates. Unlike CPLDs, FPGAs lose configuration on power-down; plan for either a flash boot image or remote update path. This page synthesizes distributor pricing, same-family Cyclone IV E drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone.

RFQ İletişim
EP4CE115F29C7N - 115K Cyclone IV E FPGA | Altera
EP4CE115F29C7N

EP4CE115F29C7N - 115K Cyclone IV E FPGA | Altera

The Altera EP4CE115F29C7N is a Cyclone IV E field-programmable gate array with 114,480 logic cells, 528 I/O, and a 60 nm fabrication process, supplied in a 780-pin FBGA package. The device operates from a 1.2 V core supply and is offered as a temperature-grade and speed-grade ordering variant for programmable-logic systems requiring substantial parallel processing capability. Its combination of logic resources, embedded memory, multipliers, and general-purpose I/O makes it suitable for industrial control, communications, instrumentation, video processing, and embedded systems that benefit from hardware parallelism. A field-programmable gate array is a semiconductor device whose digital logic is configured after manufacture. Within the broader semiconductor hierarchy, an FPGA sits above programmable logic and below application-specific programmable hardware. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA allows logic architecture, interfaces, and timing behavior to be adapted through a configuration bitstream. This makes the EP4CE115F29C7N useful when algorithms, peripherals, or interconnects are likely to evolve during development. The EP4CE115F29C7N provides 114,480 logic cells and 528 I/O in its F29 package configuration. Its 60 nm process supports integration of programmable logic and memory resources, while the 780-ball grid exposes a large number of user I/O for high-pin-count external interfaces. The C7 ordering suffix denotes a specific speed and temperature grade, and the N suffix identifies the orderable package variant. Exact timing, memory, power, and operating-temperature details should be confirmed against the manufacturer ordering information before a production release. The large logic-element count makes the device suitable for parallel datapaths, protocol engines, custom accelerators, and multi-channel control logic. System clocking, configuration storage, power sequencing, and I/O standards remain critical design constraints because a high-pin-count BGA requires careful PCB routing and power delivery. Design engineers should use the manufacturer's device and pinout documentation to map banks to appropriate supply levels and to preserve signal-integrity margins on high-speed interfaces. Typical uses include industrial PLC and motion-control modules, network-interface equipment, test and measurement platforms, camera and display pipelines, and communications gateways. In each case, the benefit comes from implementing multiple parallel operations in programmable hardware rather than relying entirely on sequential firmware execution. Development tools and intellectual-property cores can further reduce implementation effort when standard interfaces or arithmetic functions are required. A key PCB consideration is the 780-pin FBGA land pattern. Ball assignment, via-in-pad or microvia strategy, differential-pair routing, plane splits, and thermal design should be reviewed before layout release. Configuration pins must satisfy the specified pull-up or pull-down requirements, and every power ball must receive appropriate decoupling close to the device. This page combines the manufacturer's device identity, package and resource facts, commercially relevant sourcing guidance, replacement analysis, and practical integration considerations. It is intended to support early design decisions while directing final engineering work to the authoritative Cyclone IV E documentation.

RFQ İletişim
EP4CE115F29C8N - Cyclone IV E FPGA 114K LE 780-FBGA | Intel
EP4CE115F29C8N

EP4CE115F29C8N - Cyclone IV E FPGA 114K LE 780-FBGA | Intel

The Intel (formerly Altera) EP4CE115F29C8N is a member of the Cyclone IV E family of low-power, high-volume FPGAs, offering 114,480 logic elements, 3,981,312 bits of embedded memory (3888 Kb), and 528 user I/O pins in a 780-ball FineLine BGA package. It is built on a 60 nm process node and operates with core voltages between 1.15 V and 1.25 V, in the commercial 0 °C to 85 °C temperature grade (the "C8" suffix). A Field-Programmable Gate Array (FPGA) is a reprogrammable semiconductor device whose logic fabric, interconnect, and I/O are configured by the user after manufacture. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs) along with CPLDs, and they are used as flexible alternatives to ASICs and microcontrollers for high-throughput parallel processing, custom interfaces, and hardware-accelerated algorithms. The Cyclone IV E series specifically targets cost- and power-sensitive applications by combining a logic-rich fabric with up to 4 PLLs and 15 transceiver-free, general-purpose I/O standards. Key features of the EP4CE115F29C8N include 66 embedded 18x18 multipliers (266 GMACs of DSP performance), 4 general-purpose PLLs, configurable on-chip memory with 9-bit parity support, and support for external memory interfaces including DDR/DDR2/QDRII SRAM. The device exposes up to 528 user I/O pins distributed across 8 I/O banks, supporting LVDS, SSTL, HSTL, LVPECL, PCI/PCI-X, and LVCMOS/LVTTL standards. Configuration is handled through JTAG, passive/active serial, or fast passive/active parallel modes, and the device includes built-in CRC for configuration error detection. The EP4CE115F29C8N uses a 60 nm SRAM-based LUT architecture with 4-input LUTs as its basic logic element, and its 780-ball FineLine BGA package provides robust electrical performance for high-speed signalling while remaining surface-mountable. Compared to the smaller EP4CE30 and EP4CE55 devices, the EP4CE115 nearly quadruples the logic capacity while sharing the same Quartus II / Quartus Prime toolchain, IP library, and reference designs - simplifying design migration across the family. Typical applications for the EP4CE115F29C8N include industrial motor control, video bridging and image processing, software-defined radio front ends, PCIe endpoint bridges, factory automation controllers, and low-cost ASIC prototyping. Its combination of high logic density, embedded multipliers, and external memory support makes it well suited for DSP pipelines and parallel sensor aggregation. When designing with this FPGA, pay close attention to bank voltage grouping - all I/O in a bank must share a VCCIO level, and reference voltage pins (VREF) are required when using referenced I/O standards such as SSTL or HSTL. Provide proper decoupling (0.1 µF + bulk) on each VCCINT, VCCA, and VCCIO rail, and follow Intel's recommended PCB layout guidelines for BGA break-out to preserve signal integrity on DDR2 and LVDS interfaces. This page synthesizes distributor pricing, drop-in family alternatives, and practical design guidance not found in the standalone datasheet - engineered to accelerate both part selection and board bring-up.

RFQ İletişim
EP4CE115F29I7N - 114,480-LE Cyclone IV E FPGA | Altera
EP4CE115F29I7N

EP4CE115F29I7N - 114,480-LE Cyclone IV E FPGA | Altera

Altera EP4CE115F29I7N is a Cyclone IV E field-programmable gate array (FPGA) with 114,480 logic elements, 528 user I/O, and a 780-ball F29 BGA package. It combines programmable logic resources with high external interface density, making the device suitable for industrial control, communications, test equipment, embedded processing, and signal-processing systems. A field-programmable gate array is a semiconductor device whose digital logic and interconnect structure can be programmed after manufacture. Within the broader hierarchy, an FPGA belongs to programmable logic devices, complements application-specific integrated circuits (ASICs), and provides hardware flexibility without requiring a custom mask set. The Cyclone IV E family combines a programmable logic fabric, embedded memory resources, and fixed-function blocks within a single integrated circuit. The EP4CE115F29I7N ordering code identifies the EP4CE115 device in the F29 package configuration. Published product information identifies 114,480 logic elements and 528 user I/O, while the package listing identifies a 780-ball BGA. These features provide substantial parallelism for control logic, bus aggregation, protocol bridging, data acquisition, and other designs requiring numerous external connections. The 528-I/O count makes this package particularly useful when a design needs substantially more external signals than smaller FBGA options provide. FPGA designs using this device are implemented through a hardware description such as Verilog or VHDL, followed by synthesis, place-and-route, timing analysis, and bitstream generation. Because an FPGA is a programmable-logic product rather than a fixed-function digital IC, its final performance and resource utilization depend on the design, constraints, tool version, and target device configuration. Designers must also verify the exact pin assignments, supported I/O standards, power requirements, configuration method, and timing constraints against the manufacturer documentation for the selected ordering part number. Typical implementation areas include industrial automation controllers, network-interface and protocol-conversion equipment, test-and-measurement platforms, video or image-processing pipelines, communications infrastructure, and embedded control systems. In each case, the device can implement parallel logic, state machines, data paths, and peripheral interfaces while allowing functional revisions through configuration rather than silicon redesign. The large I/O count is particularly helpful for systems combining multiple buses, external memory interfaces, high-speed acquisition paths, and discrete control signals. PCB implementation requires careful attention to the 780-ball BGA footprint, power delivery, decoupling, clock integrity, configuration pins, and high-speed signal routing. The manufacturer package drawing and pin-connection guidelines should govern ball assignments and escape routing. Because exact pin functions and electrical limits are not reproduced on this page, use the official device documentation when assigning voltage domains, planning I/O standards, and calculating power-distribution-network impedance. This page consolidates the identified device attributes, package information, sourcing links, comparison context, and practical integration guidance. It is intended to accelerate engineering triage while keeping final design decisions tied to the official Cyclone IV E documentation, the EP4CE115F29I7N ordering information, and validated PCB design rules.

RFQ İletişim
EP4CE15E22C6N - 15,408-Cell Cyclone IV E FPGA | Intel
EP4CE15E22C6N

EP4CE15E22C6N - 15,408-Cell Cyclone IV E FPGA | Intel

The Intel EP4CE15E22C6N is a Cyclone IV E field-programmable gate array with 15,408 logic cells, 963 configurable logic blocks, 81 I/O, and a maximum operating frequency of 472.5 MHz. The device is supplied in a 144-pin EQFP exposed-pad package measuring 22 x 22 mm with a 0.50 mm lead pitch. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides a higher level of parallelism than a fixed-function logic IC. This makes the EP4CE15E22C6N suitable for control logic, interface conditioning, signal processing, protocol bridging, and embedded test systems where deterministic hardware timing is valuable. The device provides 15,408 logic cells organized into 963 CLBs, together with 81 I/O in a 144-pin package. Its listed maximum frequency is 472.5 MHz, making it suitable for moderately clocked control, acquisition, and communication designs. The E22 designation identifies the device configuration associated with this ordering part number, while the C6 suffix identifies the particular speed and temperature grade encoded by the manufacturer ordering code. The exposed-pad EQFP construction provides a direct thermal path from the FPGA to the PCB. Thermal performance still depends on the size and conductivity of the copper beneath and around the exposed pad, as well as the airflow and ambient conditions. Decoupling, routing, and clock distribution remain central design concerns because the device combines numerous programmable logic resources with a large pin count. Typical applications include industrial control and automation, embedded instrumentation, communication interfaces, general-purpose digital signal processing, and FPGA-based educational or prototyping systems. Its combination of logic capacity, I/O availability, and a 472.5 MHz listed maximum frequency supports designs that require parallel datapaths, flexible protocol handling, or hardware-assisted decision logic. For a new board, use the manufacturer pin-assignment and power-supply guidance when defining the footprint and plane connections. Treat the exposed pad as both a thermal feature and a PCB-layout feature, and validate every configuration, I/O standard, and timing constraint against the device documentation before fabrication. This product record combines the exact ordering-code attributes, package information, I/O count, logic resources, and frequency data into an engineering-focused reference. It also identifies pin-compatible alternatives, highlights qualification questions, and provides practical guidance for thermal management, decoupling, and design-in validation.

RFQ İletişim
EP4CE15E22C7 - 200 MHz FPGA, 15,408 LEs | Altera
EP4CE15E22C7

EP4CE15E22C7 - 200 MHz FPGA, 15,408 LEs | Altera

The Altera EP4CE15E22C7 is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 504 Kb of embedded memory, up to 81 I/O, and a maximum operating frequency of 200 MHz. It is supplied in a 144-pin EQFP package with an exposed pad, measuring 22 x 22 mm with a 0.50 mm pitch. The device operates from a 1.2 V supply and is specified for 0°C to 85°C. A field-programmable gate array is a programmable digital semiconductor whose logic and interconnect resources are configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, alongside complex programmable logic devices and system-on-chip programmable logic. The Cyclone IV E family provides configurable logic, memory and fixed I/O resources for embedded control, communications, signal processing and general-purpose digital systems. Principal verified features include 15,408 cells or logic elements, 516,096 embedded memory bits, 81 I/O and a 200 MHz maximum frequency. One retrieved technical listing also reports 47 logic cells or logic blocks, while the official-distributor result identifies the device as a 15,408-cell FPGA. Because the supplied sources use inconsistent terminology for resource counts, engineers should verify the exact architecture and usable-resource definition in the manufacturer Cyclone IV E handbook before compiling a design. The 1.2 V supply supports modern low-voltage digital cores, while the 144-pin exposed-pad package provides a substantial lead set for external memory and interfaces. Designers must follow the exact pin assignments, power-up requirements and exposed-pad connection specified by the manufacturer because those details are absent from the supplied search excerpts. Configuration programming, I/O standards, bank voltages and timing constraints also require confirmation from official design documentation. Typical uses include industrial control, embedded instrumentation, communications gateways, digital logic prototyping and medium-complexity signal-processing systems. The 200 MHz headline frequency is a device attribute rather than a guarantee that every user design will close at 200 MHz; actual performance depends on architecture, timing constraints, I/O paths and tool support. PCB implementation should preserve the package outline and 0.50 mm pitch, connect the exposed pad as directed, provide clean 1.2 V core decoupling and route high-speed interfaces with controlled impedance. Programming tool and bitstream compatibility should be validated before layout release. This page consolidates verified distributor specifications, sourcing information and replacement-status guidance while explicitly separating supplied facts from unavailable pinout, pricing and compliance details.

RFQ İletişim
EP4CE15E22C7N - Cyclone IV E FPGA, 15K LEs, 144-EQFP | Intel
EP4CE15E22C7N

EP4CE15E22C7N - Cyclone IV E FPGA, 15K LEs, 144-EQFP | Intel

The Intel (Altera) EP4CE15E22C7N is a Cyclone® IV E Field Programmable Gate Array delivering 15,408 logic elements and 516,096 bits of embedded memory in a 144-pin Enhanced QFP (EQFP-144) package with exposed pad. Built on a low-power 60 nm process, this Cyclone IV E variant targets cost-sensitive, high-volume applications that still require significant logic density, on-chip RAM, and DSP capability. According to Intel product ordering information, this part operates over the commercial temperature range (0 °C to +85 °C) and is supplied in the -7 speed grade for balanced performance and power. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit whose digital logic fabric, interconnect, and I/O are user-programmable after manufacture. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) and are widely used for parallel processing, custom digital interfaces, glue logic, prototyping ASICs, and signal processing. Cyclone IV E extends this lineage into a low-power family specifically optimized for high-volume, cost-driven designs. Key features include 81 user I/O pins, 56 embedded 18x18 multipliers (DSP blocks), 4 PLLs for clock synthesis, and a configuration architecture supporting serial (AS), parallel (PS), JTAG, and active serial modes. The exposed thermal pad supports conduction cooling and PCB ground reinforcement. Compared with the older Cyclone III family, Cyclone IV E delivers up to 30% lower total power while preserving the Quartus II / Quartus Prime design ecosystem and IP library. Typical applications include industrial motor control, factory automation controllers, video surveillance and image processing front-ends, automotive infotainment prototypes, communication bridges (UART/SPI/I2C fan-out, PCIe endpoint soft IP), and educational development boards. The 144-pin EQFP footprint makes hand-soldering feasible for prototypes, while the exposed pad remains compatible with standard SMT reflow profiles. When designing with this device, ensure the exposed pad is soldered to a ground copper pour of at least 25 mm² to keep junction temperature within the commercial range. The configuration mode must be selected before VCCIO ramps via the MSEL pins; leaving them floating causes configuration failure. Decouple each VCCINT/VCCIO rail with 0.1 µF + bulk 10 µF ceramic capacitors placed within 5 mm of the respective pins.

RFQ İletişim
EP4CE15E22C8L - 15,408-LE Cyclone IV E FPGA | Altera
EP4CE15E22C8L

EP4CE15E22C8L - 15,408-LE Cyclone IV E FPGA | Altera

The Altera EP4CE15E22C8L is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 516,096 embedded RAM bits, and 81 I/O in a 144-LQFP exposed-pad package. It is a configurable digital-logic device intended for embedded systems that require programmable combinational and sequential logic, embedded memory, parallel interfaces, and programmable I/O. The C8 ordering designation identifies the commercial speed and temperature grade, while the final L suffix identifies the leaded 144-pin package configuration. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside complex programmable logic devices and programmable system-on-chip devices. Internally, programmable logic elements support Boolean operations, routing networks connect those elements, and embedded RAM blocks provide on-chip data storage. This combination makes an FPGA useful when a design requires several digital functions, flexible interface timing, field updates, or a compact replacement for multiple fixed-function logic devices. The EP4CE15E22C8L provides 15,408 logic elements and 516,096 RAM bits, giving it substantially more configurable capacity than small interface or control FPGAs. Its 81 I/O supports external connections to processors, memories, converters, transceivers, and display or storage peripherals. The 144-LQFP exposed-pad package offers a through-hole assembly format while allowing the center thermal pad to improve heat transfer from the device when the PCB provides a suitable thermal design. The C8 designation corresponds to the commercial operating class used in the Cyclone IV E ordering system. Designers must configure the device using a compatible Altera or Intel FPGA development environment and a Quartus Prime project containing the pin assignments, constraints, and timing requirements for the target board. Configuration storage, clock distribution, reset behavior, and supported I/O standards are established in the device handbook and board-level design documentation. Typical uses include industrial control, instrumentation, communication interfaces, test equipment, embedded signal processing, and general-purpose digital logic platforms. The device is particularly suitable when multiple counters, state machines, protocol engines, data paths, and memory buffers must be consolidated into one programmable component. A hardware design can then be revised by changing the FPGA bitstream rather than redesigning a board with a fixed logic device. Thermal design is a central implementation consideration because logic utilization, switching activity, supply voltage, ambient temperature, and PCB copper area determine junction temperature. Place the exposed pad on a thermal-via field connected to an uninterrupted ground plane, verify the thermal design against the package and device guidance, and maintain the recommended power and I/O configurations. Do not treat the exposed pad as an interchangeable signal pin. This product page combines the exact device identity, package and logic-resource information with procurement guidance, application fit, engineering notes, and a same-package comparison framework. It is intended to help engineers confirm footprint compatibility, assess logic and I/O capacity, plan configuration and thermal implementation, and request current commercial availability before committing the FPGA to a PCB design.

RFQ İletişim
EP4CE15E22C8LN - 15,408-Logic-Element Cyclone IV E FPGA | Altera
EP4CE15E22C8LN

EP4CE15E22C8LN - 15,408-Logic-Element Cyclone IV E FPGA | Altera

The Altera EP4CE15E22C8LN is a Cyclone IV E field-programmable gate array built around the EP4CE15 device and E22 package configuration. It provides 15,408 logic elements, 516,096 bits of block RAM, 81 embedded memory blocks, a 1.2 V supply, and 144 package pins in a 20 mm × 20 mm EQFP with an exposed thermal pad. The C8 speed designation identifies the performance grade, while the E22 suffix identifies the supported package configuration. A field-programmable gate array is a semiconductor whose digital logic, memory, and programmable I/O resources are configured after fabrication. An FPGA belongs to the broader programmable-logic hierarchy, combining configurable logic elements, block RAM, programmable input/output, and dedicated clock resources on one integrated circuit. Cyclone IV E devices are intended for embedded systems requiring moderate logic density, deterministic parallel interfaces, and reprogrammable control logic without the cost and complexity of a larger FPGA family. The EP4CE15E22C8LN offers 15,408 logic elements and 504 Kb of embedded block RAM. Its 81 memory blocks support designs that require local data storage, packet buffering, or moderate-width data paths. The 144-pin exposed-pad package provides access to the device's user I/O while supporting thermal dissipation through a PCB land pattern and copper area. The listed 1.2 V core supply is distinct from the external I/O voltage supplies required by the selected banks. The E22 package assigns the Cyclone IV E I/O and core resources to a 144-pin footprint. Because an FPGA design depends on the exact package pinout, bank voltage limits, configuration pins, and dedicated power pins, hardware substitution cannot be based only on logic-cell count. Configuration and programming behavior are also determined by the complete device ordering code rather than by the EP4CE15 family name alone. Typical uses include industrial control, test and measurement equipment, communications interfaces, video or display control, embedded instrumentation, and general-purpose prototyping. The 15,408-logic-element device is appropriate when parallel data acquisition, protocol bridging, control sequencing, or multiple I/O interfaces must be consolidated into a single programmable device. Designs requiring substantially more logic, memory, high-speed transceivers, or hard processors should be compared with larger Cyclone devices. PCB implementation should follow the manufacturer package drawing and pin-information document. Decoupling must be placed at the appropriate core and I/O supply pins, and the exposed thermal pad requires a compatible land pattern and adequate copper. Confirm every signal, voltage bank, configuration connection, and unused pin against the package-specific documentation before releasing a layout. This product page organizes the exact EP4CE15E22C8LN ordering information, verified device attributes, source documents, commercial inquiry path, and drop-in qualification analysis. It also highlights which package and electrical details must still be confirmed directly in the Cyclone IV E documentation before schematic or layout signoff.

RFQ İletişim
EP4CE15E22C8N - Cyclone IV E FPGA, 15K LE, 144-EQFP | Intel / Altera
EP4CE15E22C8N

EP4CE15E22C8N - Cyclone IV E FPGA, 15K LE, 144-EQFP | Intel / Altera

The Intel / Altera EP4CE15E22C8N is a Cyclone IV E family Field Programmable Gate Array (FPGA) with 15,408 logic elements, 516,096 bits of embedded memory, and 56 embedded 18x18 multipliers, housed in a 144-pin Enhanced QFP (EQFP-144) package with exposed thermal pad. It is offered in the commercial speed grade 8 with a 1.2V core supply. A Field Programmable Gate Array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected via programmable interconnect. FPGAs belong to the broader category of programmable logic devices (PLDs) and sit within the hierarchy of digital integrated circuits. Unlike fixed-function ASICs, FPGAs can be reconfigured in-system to implement custom digital logic, DSP pipelines, memory controllers, and interface protocols, making them ideal for prototyping and low-to-medium volume designs. Key features of the EP4CE15E22C8N include 15,408 logic elements (LEs), 516,096 bits (63 Kbytes) of embedded SRAM, 56 embedded 18x18 hardware multipliers, 4 general-purpose PLLs, and 20 global clock networks. The device supports LVDS, LVTTL, LVCMOS, SSTL, and other I/O standards through 81 user I/O pins. Static power consumption is optimized through Cyclone IV E's low-power process technology targeting under 1.5W typical static power. Architecturally, the EP4CE15E22C8N uses a 60nm low-power CMOS process and the LUT-based logic fabric shared across the Cyclone IV E family. Memory blocks (M9K) deliver true dual-port operation at up to 300 MHz, and the 18x18 multipliers support DSP operations such as FIR filters and FFTs without consuming general logic. Typical applications include industrial control and motor drives, video processing and display controllers, automotive infotainment prototypes, communications protocol bridges, and general-purpose glue logic replacement. Designers also use the EP4CE15E22C8N for PCIe endpoint soft IP (Gen1 capable) when paired with external transceivers. When designing with this device, plan power sequencing (1.2V core before 2.5V/3.3V I/O), use the Quartus Prime design suite for synthesis and place-and-route, and ensure the exposed thermal pad on the EQFP-144 is soldered to a thermal ground plane for adequate heat dissipation. This page synthesizes distributor pricing, drop-in Cyclone IV alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
EP4CE15E22C9L - 15,408-Cell 60 nm Cyclone IV E FPGA | Intel
EP4CE15E22C9L

EP4CE15E22C9L - 15,408-Cell 60 nm Cyclone IV E FPGA | Intel

Intel/Altera EP4CE15E22C9L is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 81 I/O pins, 516,096 embedded-memory bits, and a 1.2 V core supply in a 144-pin LQFP exposed-pad package. The device is manufactured using 60 nm FPGA technology and provides programmable combinational and sequential logic for embedded control, communications, industrial, and consumer applications. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after fabrication. A configurable FPGA combines programmable logic blocks, embedded memory, and programmable I/O into one device. Within the device hierarchy, the EP4CE15E22C9L belongs to the Cyclone IV E FPGA family, which provides a higher level of integration than basic programmable logic arrays while supporting parallel interface logic, control functions, and moderate levels of on-chip data processing. The Cyclone IV E device provides 15,408 logic elements and 516,096 embedded-memory bits for implementing state machines, datapaths, protocol bridges, controllers, and general-purpose digital logic. Its 81 I/O pins make the device suitable for designs requiring numerous external connections. The 144-pin LQFP exposed-pad package supports conventional surface-mount assembly while providing a thermal and ground connection through its exposed pad. The EP4CE15E22C9L operates from a 1.2 V core supply and uses 60 nm process technology. These figures position it as a low-power, moderately integrated FPGA for cost-sensitive embedded systems. Configuration programming determines the logic implemented inside the device, allowing one physical component to support multiple product functions when appropriate design tools and configuration data are used. Typical uses include industrial automation, communications interfaces, consumer electronics, test equipment, and embedded control systems. The FPGA can implement parallel sensor acquisition, custom protocol handling, timing controls, display or data-acquisition logic, and supervisory functions. Designs combining an FPGA with a microcontroller or dedicated interface IC can partition work between configurable parallel logic and sequential embedded processing. PCB implementation should account for the exposed thermal pad, supply decoupling, configuration pins, and the requirements of the selected Cyclone design tools. Use the manufacturer pin-description table when assigning tracks, and follow the device power-up and configuration sequence before enabling dependent circuitry. Thermal performance and signal integrity depend on stack-up, return paths, component placement, and the switching activity of the implemented logic. This product page consolidates device identity, package details, verified technical parameters, drop-in alternatives, comparison parameters, and practical design guidance. It is intended to accelerate component review while leaving final programming, timing, power, and PCB decisions to the system design engineer.

RFQ İletişim
EP4CE15E22I7 - 15,408-L-cell FPGA | Altera | Industrial Control
EP4CE15E22I7

EP4CE15E22I7 - 15,408-L-cell FPGA | Altera | Industrial Control

The Altera EP4CE15E22I7 is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 81 user I/O, a 1.2 V core supply, and a 144-pin LQFP exposed-pad package. It combines programmable digital logic, fixed hardware multipliers, memory, and general-purpose I/O in one reconfigurable semiconductor. The verified distributor listing identifies 516,096 embedded-memory bits and describes the device as an 81-I/O FPGA in the Cyclone IV E family. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. An FPGA sits in the programmable-logic hierarchy above individual gates and below a software-driven microcontroller architecture. Its configurable lookup logic, routing fabric, memory blocks, and dedicated arithmetic resources allow designers to implement parallel control, signal processing, communications, and hardware acceleration without changing the physical PCB. The EP4CE15E22I7 provides 15,408 logic elements for digital state machines, interfaces, and control logic. Its 81 I/O support external digital connections, while 516,096 embedded-memory bits add local data-storage capability. The 1.2 V value reported in the verified data describes the core supply, and the 60 nm process technology identifies the manufacturing node. The 144-pin exposed-pad package provides a defined PCB footprint with a thermal land for heat spreading. Compared with a microcontroller, this FPGA offers parallel hardware execution and deterministic combinational or sequential logic, but it generally requires configuration data and external configuration memory or a boot source. Its reconfigurable architecture is useful when design rules, interface timing, or parallel data paths are more important than software convenience. Designers must also observe power-up, configuration, signal-integrity, decoupling, and thermal requirements. Typical uses include industrial control, instrumentation, communications adapters, embedded test equipment, motor and power-system control, and digital signal-processing front ends. The exposed pad assists package heat dissipation, but actual performance depends on PCB copper area, airflow, switching activity, and the implemented design. For new layouts, retain the manufacturer-recommended power and ground planes, place bypass capacitors close to supply pins, and route sensitive or high-speed signals away from switching nodes. Validate the complete design with timing analysis, power estimation, signal-integrity checks, and thermal testing rather than treating the family-level specifications as a finished-system guarantee. This page consolidates verified distributor specifications, sourcing information, application guidance, and design cautions. Its comparison and selection material is intended to accelerate procurement and engineering review while clearly separating published facts from values that still require manufacturer-datasheet confirmation.

RFQ İletişim